summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-04-02Prepare v2024.04Tom Rini3-12/+892
Signed-off-by: Tom Rini <trini@konsulko.com>
2024-03-30Merge tag 'u-boot-imx-master-20240330' of ↵Tom Rini5-8/+31
https://gitlab.denx.de/u-boot/custodians/u-boot-imx CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/20122 - Fix reset regression on mx6cuboxi and warp7. - Fix Fix board revision detection on mx6cuboxi.
2024-03-30mx6cuboxi: Convert to watchdog driver modelFabio Estevam2-0/+13
Commit 68dcbdd594d4 ("ARM: imx: Add weak default reset_cpu()") caused the 'reset' command in U-Boot to not cause a board reset. Fix it by switching to the watchdog driver model via sysreset, which is the preferred method for implementing the watchdog reset. Signed-off-by: Fabio Estevam <festevam@gmail.com> Tested-by: Christian Gmeiner <cgmeiner@igalia.com>
2024-03-30warp7: Convert to watchdog driver modelFabio Estevam2-0/+13
Commit 68dcbdd594d4 ("ARM: imx: Add weak default reset_cpu()") caused the 'reset' command in U-Boot to not cause a board reset. Fix it by switching to the watchdog driver model via sysreset, which is the preferred method for implementing the watchdog reset. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2024-03-30mx6cuboxi: Fix board revision detectionFabio Estevam1-8/+5
Currently, an i.MX6 Cuboxi board is incorrectly detected as the HummingBoard model: U-Boot 2024.04-rc5 (Mar 26 2024 - 15:59:22 +0100) CPU: Freescale i.MX6Q rev1.3 996 MHz (running at 792 MHz) CPU: Extended Commercial temperature grade (-20C to 105C) at 26C Reset cause: POR Model: SolidRun HummingBoard2 Dual/Quad (1.5som+emmc) gpio@20a4000: set_dir_flags: error: gpio GPIO3_8 not reserved gpio@20a4000: get_value: error: gpio GPIO3_8 not reserved gpio@20a8000: set_dir_flags: error: gpio GPIO4_4 not reserved gpio@20a8000: get_value: error: gpio GPIO4_4 not reserved gpio@20b0000: set_dir_flags: error: gpio GPIO6_9 not reserved gpio@20b0000: get_value: error: gpio GPIO6_9 not reserved Board: MX6 HummingBoard DRAM: 2 GiB ... This error happens because request_detect_gpios() uses the GPIO DM API, but board_type() still uses the legacy non-DM GPIO API. Fix it by using the GPIO DM API in board_type() to read the board revision pins in SPL. Reported-by: Christian Gmeiner <cgmeiner@igalia.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Tested-by: Christian Gmeiner <cgmeiner@igalia.com>
2024-03-28Merge tag 'doc-2024-04-rc6' of ↵Tom Rini4-7/+121
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request doc-2024-04-rc6 Documentation: * man page of 'itest' * tee: sandbox: fix spelling errors in function documentation
2024-03-27doc: add reference to itest in if man-pageHeinrich Schuchardt1-3/+3
Add a cross reference to the itest command. Fix a typo: %s/Example/Examples/. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2024-03-27doc: man-page for itestHeinrich Schuchardt2-0/+114
Provide a man-page for the itest command. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2024-03-27tee: sandbox: fix spelling errorsIgor Opaniuk1-4/+4
Fix spelling errors in comments. Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com>
2024-03-26Merge https://source.denx.de/u-boot/custodians/u-boot-riscvTom Rini1-1/+1
- Fix RISC-V falcon mode booting issue
2024-03-26spl: riscv: opensbi: fix check of PAYLOAD_ARGS_ADDRRandolph1-1/+1
When Falcon Mode is enabled on RISC-V, use CONFIG_VAL to check PAYLOAD_ARGS_ADDR, not CONFIG_IS_ENABLED. Fixes: 10c4ab898c25 ("spl: riscv: falcon: move fdt blob to specified address") Signed-off-by: Randolph <randolph@andestech.com> Tested-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2024-03-25Prepare v2024.04-rc5Tom Rini2-6/+6
Signed-off-by: Tom Rini <trini@konsulko.com>
2024-03-25Merge tag 'u-boot-amlogic-fixes-20240325' of ↵Tom Rini11-15/+45
https://source.denx.de/u-boot/custodians/u-boot-amlogic - fix Ethernet and random MAC's on WeTek Hub/Play2 - fix buffer overflow in serial, mac & usid read
2024-03-25board: amlogic: fix buffler overflow in seria, mac & usid readNeil Armstrong9-15/+30
While meson_sm_read_efuse() doesn't overflow, the string is not zero terminated and env_set*() will buffer overflow and add random characters to environment. Acked-by: Viacheslav Bocharov <adeep@lexina.in> Link: https://lore.kernel.org/r/20240320-u-boot-fix-p200-serial-v2-1-972be646a301@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2024-03-25board: amlogic: add meson_generate_serial_ethaddr fallback to p200Christian Hewitt1-0/+2
Add a fall-back method to generate ethaddr from CPU serial on p200 boards if the MAC cannot be read from efuse. This prevents random MAC addresses on the WeTek Hub/Play2 boards. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Link: https://lore.kernel.org/r/20240324151905.3817732-3-christianshewitt@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2024-03-25ARM: dts: fix Ethernet on WeTek Hub/Play2Christian Hewitt2-0/+13
Placing the snps,reset content needed for Ethernet to probe in a common uboot.dtsi results in the content not being used and broken Ethernet. Fix this by creating two board specific dtsi files with the right content. Fixes: 67d5128df950 ("ARM: dts: add support for WeTek Hub and WeTek Play2") Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Link: https://lore.kernel.org/r/20240324151905.3817732-2-christianshewitt@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2024-03-22board: toradex: verdin-am62_r5: Increase SPL_STACK_R_MALLOC_SIMPLE_LENHiago De Franco1-1/+1
Increase the SPL_STACK_R_MALLOC_SIMPLE_LEN to 0x200000 to accommodate the size of tispl.bin fit image. With the recent upgrade of ti-linux-firmware from version v9.1.0 to v9.2.5, the size of tispl.bin fit image has increased to 1.4MB, causing allocation errors in the R5 SPL: ``` alloc space exhausted Could not get FIT buffer of 1325056 bytes check CONFIG_SPL_SYS_MALLOC_SIZE ``` Signed-off-by: Hiago De Franco <hiago.franco@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
2024-03-22.mailmap entry for Masahisa KojimaHeinrich Schuchardt1-0/+1
The Linaro mail address is not valid anymore. Cc: kojima.masahisa@socionext.com Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Masahisa Kojima <kojima.masahisa@socionext.com>
2024-03-22arm: dts: k3-am625-verdin-r5: Change CPU frequency to 800MHzJoao Paulo Goncalves1-1/+1
The lowest speed grade of Toradex AM62 SoMs is K speed, resulting in a max value of 800MHz for the CPU operating frequency. A solution with runtime selection of the CPU frequency is already planned to avoid these kinds of problems in the future. Fixes: 8fb8a6d49977 ("arm: dts: k3-am625-verdin-r5:Change CPU frequency to 1000MHz") Signed-off-by: Joao Paulo Goncalves <joao.goncalves@toradex.com>
2024-03-22clk: clk-imx8qm: Add LPUART IPG entriesFabio Estevam1-1/+12
Since commit cc7df0b9e8bc ("serial: lpuart: Enable IPG clock") the apalis-imx8qm board no longer boots. The reason is that the imx8qm clock driver does not handle the LPUART IPG clocks inside get_rate(), set_rate() and enable() functions. Fix the boot regression by adding the LPUART IPG entries. Fixes: cc7df0b9e8bc ("serial: lpuart: Enable IPG clock") Reported-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2024-03-22clk: clk-imx8qxp: Add LPUART IPG entriesFabio Estevam1-1/+12
Since commit cc7df0b9e8bc ("serial: lpuart: Enable IPG clock") the colibri-imx8qxp board no longer boots. The reason is that the imx8qxp clock driver does not handle the LPUART IPG clocks inside get_rate(), set_rate() and enable() functions. Fix the boot regression by adding the LPUART IPG entries. Fixes: cc7df0b9e8bc ("serial: lpuart: Enable IPG clock") Reported-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X Acked-by: Sean Anderson <seanga2@gmail.com>
2024-03-21Merge tag 'efi-2024-04-rc5-2' of ↵Tom Rini28-83/+165
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request efi-2024-04-rc5-2 Documentation: * patman: Properly document the patchwork_url setting * doc: man-page for if * colibri-imx8x, apalis-imx8: update board documentation UEFI: * correct handling of EFI binary return code * don't show usage help if EFI binary fails. * correct error handling for bootefi selftest command
2024-03-21patman: Properly document the patchwork_url settingDouglas Anderson1-4/+4
The "Series-patchwork-url:" tag description says that it overrides the settings file but doesn't specify the name of the setting. Elsewhere in the documentation about the "useful" settings we see a setting that sounds promising called "patchwork_server" that's actually not a valid setting. It should be "patchwork_url". Fix these problems so the doc is right and more useful. Signed-off-by: Douglas Anderson <dianders@chromium.org>
2024-03-21doc: typo SynopisHeinrich Schuchardt21-42/+42
%s/Synopis/Synopsis/g Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2024-03-21doc: man-page for ifHeinrich Schuchardt2-0/+73
Provide a man-page for the if command. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2024-03-21cmd: bootefi: error handling bootefi selftestHeinrich Schuchardt1-3/+1
If bootefi selftest is executed and a problem with the device-tree installation occurs, efi_install_fdt() writes sensible error messages. It never returns EFI_INVALID_PARAMETER. It neither makes sense to check for EFI_INVALID_PARAMETER nor to show the usage help for the bootefi command in this case. Fixes: 296faf4f7ef1 ("cmd: bootefi: re-organize do_bootefi()") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2024-03-21cmd: bootefi: Don't show usage help if EFI binary fails.Heinrich Schuchardt1-6/+2
If an EFI binary returns an error code EFI_INVALID_PARAMETER, we show the usage help for the bootefi command: Shell> exit 0x8000000000000002 ## Application failed, r = 2 bootefi - Boots an EFI payload from memory Usage: bootefi <image address>[:<image size>] [<fdt address>] - boot EFI payload bootefi bootmgr [fdt address] - load and boot EFI payload based on BootOrder/BootXXXX variables. If specified, the device tree located at <fdt address> gets exposed as EFI configuration table. This makes no sense. Fixes: 296faf4f7ef1 ("cmd: bootefi: re-organize do_bootefi()") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2024-03-21efi_loader: correct handling of EFI binary return codeHeinrich Schuchardt1-5/+11
We should not try to remove protocol interfaces from a NULL handle. efi_run_image() should always return the return code of the executed EFI binary. Fixes: 6422820ac3e5 ("efi_loader: split unrelated code from efi_bootmgr.c") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2024-03-21doc: board: apalis-imx8: Update and improve documentationHiago De Franco1-16/+16
Update and improve the building documentation of Apalis iMX8. The following changes were made: - imx-atf repository changed to nxp-imx GitHub. - imx-atf branch updated to 'lf_v2.6'. - imx-seco updated to version 5.8.7. - nxp-imx mfgtools link updated to GitHub releases. - General writing improvements. Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>
2024-03-21doc: board: colibri-imx8x: Update and improve documentationHiago De Franco1-7/+16
Update and improve the building documentation of Colibri iMX8X. The following changes were made: - imx-atf repository changed to nxp-imx GitHub. - imx-atf branch updated to 'lf_v2.6'. - imx-seco updated to version 5.8.7. - nxp-imx mfgtools link updated to GitHub releases. - General writing improvements. Signed-off-by: Hiago De Franco <hiago.franco@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
2024-03-17Merge tag 'u-boot-imx-master-20240317' of ↵Tom Rini4-6/+21
https://gitlab.denx.de/u-boot/custodians/u-boot-imx CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/19974 - Fix build error when SoM detection on Phytec board. - Fix sc_misc_otp_fuse_read() error check on colibri-imx8x/apalis-imx8. - Fix NPU/VPU fdt disable fixup on i.MX8M.
2024-03-17arm: imx: imx8m: soc: Fix NPU/VPU fdt disable fixupVitor Soares1-4/+14
On imx8m[m|p|q].dtsi, upstream Linux uses different names for NPU/VPU IP block nodes. It leads variants without such HW block having it enabled by default. This patch adds the upstream Linux node's paths to the disable list while keep the compatibility with downstream Linux. Signed-off-by: Vitor Soares <vitor.soares@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
2024-03-17apalis-imx8: Fix sc_misc_otp_fuse_read() error checkFabio Estevam1-1/+1
Commit bfb3409d676f ("imx: toradex/apalis-imx8: correct SCU API usage") made an incorrect logic change in the error code check of sc_misc_otp_fuse_read(): - if (scierr == SC_ERR_NONE) { + if (scierr) { /* QP has one A72 core disabled */ is_quadplus = ((val >> 4) & 0x3) != 0x0; } The other changes in this commit are correct. sc_misc_otp_fuse_read() returns 0 on a successful fuse read. This inversion causes board_mem_get_layout() to report incorrect RAM size. Go back the original error check logic to fix the problem. Fixes: bfb3409d676f ("imx: toradex/apalis-imx8: correct SCU API usage") Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2024-03-17colibri-imx8x: Fix sc_misc_otp_fuse_read() error checkFabio Estevam1-1/+1
Commit aa6e698a7acd ("imx: toradex/colibri-imx8x: correct SCU API usage") made an incorrect logic change in the error code check of sc_misc_otp_fuse_read(): - if (sc_err == SC_ERR_NONE) { + if (sc_err) { /* DX has two A35 cores disabled */ return (val & 0xf) != 0x0; } The other changes in this commit are correct. sc_misc_otp_fuse_read() returns 0 on a successful fuse read. This inversion causes board_mem_get_layout() to report incorrect RAM size. Go back the original error check logic to fix the problem. Fixes: aa6e698a7acd ("imx: toradex/colibri-imx8x: correct SCU API usage") Reported-by: Hiago De Franco <hiago.franco@toradex.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Hiago De Franco <hiago.franco@toradex.com> # Toradex Colibri iMX8X 1GB
2024-03-17board: phytec: define get_som_type also when SoM detection is disabledBenjamin Hahn1-0/+5
define the phytec_get_som_type function also when the SoM detection is disabled. Fixes: commit 110d321a56c3 ("board: phytec: common: phytec_som_detection: Add phytec_get_som_type") Signed-off-by: Benjamin Hahn <B.Hahn@phytec.de>
2024-03-13Merge tag 'efi-2024-04-rc5' of ↵Tom Rini8-19/+22
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request efi-2024-04-rc5 Documentation: * fix Python string escapes * develop: commands: Fix function prototype * fix incorrect path Documentation * fix mistyped "env flags" command * board: phytec: phycore-am62x: Update artifact names UEFI: * Invoke ft_board_setup() before efi_carve_out_dt_rsv()
2024-03-13Merge tag 'mips-fixes-for-v2024.04' of ↵Tom Rini3-3/+20
https://source.denx.de/u-boot/custodians/u-boot-mips - mips: implement __udivdi3 to fix building of SquashFS - mips: fix bug in cache init on MIPS32r2 or later
2024-03-13mips: fix change_k0_cca()Daniel Schwierzeck1-2/+2
The intention of change_k0_cca() is to read the C0.Config register into register $t0, update $t0 with the new cache coherency mode passed in $a0 and write back $t0 to C0.Config. With MIPS32 R2 or later instruction sets, this can be achieved with a single instruction with INS. The source and destination register of the INS instruction is passed as first parameter. In case of change_k0_cca() it is register $t0. But for writing back the updated value to C0.Config, the incorrect $a0 register is used. This is only correct in the MIPS32 R1 code path. Fix the `mtc0` instruction to write back the value of the $t0 register. Fix the MIPS32 R1 code path to also store the updated value in $t0. Reported by user ddqxy138 on Github. https://github.com/u-boot/u-boot/commit/b838586086af3278bcaead3720c7a18813cf4619 Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2024-03-13mips: implement __udivdi3Linus Walleij2-1/+18
Squashfs wasn't compiling because the lldiv() directives turn into __udivdi3 and we are using private libgcc. After this squashfs compiles for MIPS. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Tested-by: Bartel Eerdekens <barteleerdekens@gmail.com>
2024-03-13doc: fix incorrect path DocumentationHeinrich Schuchardt1-4/+4
When copying the build system for Linux we missed to replace some instances of 'Documentation' by 'doc'. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2024-03-13doc/sphinx: fix Python string escapesBenjamin Gray4-7/+7
Python 3.6 introduced a DeprecationWarning for invalid escape sequences. This is upgraded to a SyntaxWarning in Python 3.12, and will eventually be a syntax error. Fix these now to get ahead of it before it's an error. Signed-off-by: Benjamin Gray <bgray@linux.ibm.com> Message-ID: <20230912060801.95533-3-bgray@linux.ibm.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Adapted for U-Boot Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2024-03-13doc: board: phytec: phycore-am62x: Update artifact namesWadim Egorov1-3/+3
Use proper binary artifact names for HSFS devices. Do not use the *_unsigned binaries. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
2024-03-13doc: develop: commands: Fix function prototypeAlexander Dahl1-1/+1
When using the previous prototype you got a compiler warning like this: warning: initialization of 'int (*)(struct cmd_tbl *, int, int, char * const*)' from incompatible pointer type 'int (*)(struct cmd_tbl *, int, int, const char **)' [-Wincompatible-pointer-types] Fixes: 3d9640f55cb2 ("doc: expand README.commands") Signed-off-by: Alexander Dahl <ada@thorsis.com>
2024-03-13efi_loader: Don't carve out memory reservations too earlyMark Kettenis1-4/+7
Moving the efi_carve_out_dt_rsv() call in commit 1be415b21b2d ("efi_loader: create memory reservations in ACPI case") broke boards that create additional memory reservations in ft_board_setup() since it is now called before those additional memory reservations are made. This is the case for the rk3588 boards and breaks booting OpenBSD on those boards. Move the call back to its original location and add a call in the code path used for ACPI. Fixes: 1be415b21b2d ("efi_loader: create memory reservations in ACPI case") Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2024-03-13doc: fix mistyped "env flags" commandThomas Weißschuh1-1/+1
Signed-off-by: Thomas Weißschuh <thomas@t-8ch.de> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2024-03-12Merge https://source.denx.de/u-boot/custodians/u-boot-riscvTom Rini9-25/+29
* riscv: lib: improve extension detection * riscv: sbi: fix display format and global variable storage * sifive: fu740: reduce DDR speed * board: starfive vf2: switch to standard boot and fix DTS
2024-03-12board: starfive: maintainer: Add visionfive2 PCIe driverMinda Chen1-0/+1
Add PCIe driver file to visionfive2 board MAINTAINERS list. Signed-off-by: Minda Chen <minda.chen@starfivetech.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2024-03-12board: starfive: Update maintainer of VisionFive v2 boardMinda Chen1-1/+1
Update the maintainer of Starfive VisionFive v2 board. Signed-off-by: Minda Chen <minda.chen@starfivetech.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2024-03-12cmd: sbi: formatting PolarFire Hart Software Services versionHeinrich Schuchardt1-0/+1
The 'PolarFire Hart Software Services' SBI implementation returns the version of the incorporated OpenSBI. Format the number accordingly. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
2024-03-12cmd: sbi: Correctly display unknown implementation IDsHeinrich Schuchardt1-1/+1
For an unknown implementation ID an output like SBI 1.0Unknown implementation ID 16777216 Extensions: sbi_set_timer ... was shown. The number 16777216 is not the implementation ID. * Show the correct number * Use a hexadecimal output format * Add a missing line feed Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-25 22:08:09 +0000