diff options
Diffstat (limited to 'include/configs/apollon.h')
-rw-r--r-- | include/configs/apollon.h | 76 |
1 files changed, 38 insertions, 38 deletions
diff --git a/include/configs/apollon.h b/include/configs/apollon.h index edfae2743f..d71ed44fcd 100644 --- a/include/configs/apollon.h +++ b/include/configs/apollon.h @@ -43,14 +43,14 @@ /* Boot method */ /* uncomment if you use NOR boot */ -/* #define CFG_NOR_BOOT 1 */ +/* #define CONFIG_SYS_NOR_BOOT 1 */ /* uncomment if you use NOR on CS3 */ -/* #define CFG_USE_NOR 1 */ +/* #define CONFIG_SYS_USE_NOR 1 */ -#ifdef CFG_NOR_BOOT -#undef CFG_USE_NOR -#define CFG_USE_NOR 1 +#ifdef CONFIG_SYS_NOR_BOOT +#undef CONFIG_SYS_USE_NOR +#define CONFIG_SYS_USE_NOR 1 #endif #include <asm/arch/omap2420.h> /* get chip and board defs */ @@ -73,8 +73,8 @@ * Size of malloc() pool */ #define CONFIG_ENV_SIZE SZ_128K /* Total Size of Environment Sector */ -#define CFG_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_128K) -#define CFG_GBL_DATA_SIZE 128 /* bytes reserved for initial data */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_128K) +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for initial data */ /* * Hardware drivers @@ -92,11 +92,11 @@ */ #define V_NS16550_CLK (48000000) /* 48MHz (APLL96/2) */ -#define CFG_NS16550 -#define CFG_NS16550_SERIAL -#define CFG_NS16550_REG_SIZE (-4) -#define CFG_NS16550_CLK V_NS16550_CLK /* 3MHz (1.5MHz*2) */ -#define CFG_NS16550_COM1 OMAP2420_UART1 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK /* 3MHz (1.5MHz*2) */ +#define CONFIG_SYS_NS16550_COM1 OMAP2420_UART1 /* * select serial console configuration @@ -107,7 +107,7 @@ #define CONFIG_ENV_OVERWRITE #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 -#define CFG_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} +#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <config_cmd_default.h> @@ -118,7 +118,7 @@ #undef CONFIG_CMD_AUTOSCRIPT -#ifndef CFG_USE_NOR +#ifndef CONFIG_SYS_USE_NOR # undef CONFIG_CMD_FLASH # undef CONFIG_CMD_IMLS #endif @@ -158,20 +158,20 @@ */ #define V_PROMPT "Apollon # " -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT V_PROMPT -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT V_PROMPT +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ /* Print Buffer Size */ -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_MEMTEST_START (OMAP2420_SDRC_CS0) /* memtest works on */ -#define CFG_MEMTEST_END (OMAP2420_SDRC_CS0+SZ_31M) +#define CONFIG_SYS_MEMTEST_START (OMAP2420_SDRC_CS0) /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END (OMAP2420_SDRC_CS0+SZ_31M) -#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ +#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */ -#define CFG_LOAD_ADDR (OMAP2420_SDRC_CS0) /* default load address */ +#define CONFIG_SYS_LOAD_ADDR (OMAP2420_SDRC_CS0) /* default load address */ /* The 2420 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) * or by 32KHz clk, or from external sig. This rate is divided by a local @@ -179,9 +179,9 @@ */ #define V_PVT 7 /* use with 12MHz/128 */ -#define CFG_TIMERBASE OMAP2420_GPT2 -#define CFG_PVT V_PVT /* 2^(pvt+1) */ -#define CFG_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT)) +#define CONFIG_SYS_TIMERBASE OMAP2420_GPT2 +#define CONFIG_SYS_PVT V_PVT /* 2^(pvt+1) */ +#define CONFIG_SYS_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PVT)) /*----------------------------------------------------------------------- * Stack sizes @@ -205,26 +205,26 @@ /*----------------------------------------------------------------------- * FLASH and environment organization */ -#ifdef CFG_USE_NOR +#ifdef CONFIG_SYS_USE_NOR /* OneNAND boot, NOR has CS3, But NOR has CS0 when NOR boot */ -# define CFG_FLASH_BASE 0x18000000 -# define CFG_MAX_FLASH_BANKS 1 -# define CFG_MAX_FLASH_SECT 1024 +# define CONFIG_SYS_FLASH_BASE 0x18000000 +# define CONFIG_SYS_MAX_FLASH_BANKS 1 +# define CONFIG_SYS_MAX_FLASH_SECT 1024 /*----------------------------------------------------------------------- * CFI FLASH driver setup */ -# define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */ +# define CONFIG_SYS_FLASH_CFI 1 /* Flash memory is CFI compliant */ # define CONFIG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */ -/* #define CFG_FLASH_USE_BUFFER_WRITE 1 */ /* Use buffered writes (~10x faster) */ -# define CFG_FLASH_PROTECTION 1 /* Use h/w sector protection*/ +/* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 */ /* Use buffered writes (~10x faster) */ +# define CONFIG_SYS_FLASH_PROTECTION 1 /* Use h/w sector protection*/ -#else /* !CFG_USE_NOR */ -# define CFG_NO_FLASH 1 -#endif /* CFG_USE_NOR */ +#else /* !CONFIG_SYS_USE_NOR */ +# define CONFIG_SYS_NO_FLASH 1 +#endif /* CONFIG_SYS_USE_NOR */ /* OneNAND boot, OneNAND has CS0, NOR boot ONeNAND has CS2 */ -#define CFG_ONENAND_BASE 0x00000000 +#define CONFIG_SYS_ONENAND_BASE 0x00000000 #define CONFIG_ENV_IS_IN_ONENAND 1 #define CONFIG_ENV_ADDR 0x00020000 |