diff options
Diffstat (limited to 'drivers')
47 files changed, 112 insertions, 112 deletions
diff --git a/drivers/cache/cache-v5l2.c b/drivers/cache/cache-v5l2.c index 2c7983d0ce..bbdb76bd57 100644 --- a/drivers/cache/cache-v5l2.c +++ b/drivers/cache/cache-v5l2.c @@ -68,8 +68,8 @@ struct v5l2_plat { struct l2cache *regs; u32 iprefetch; u32 dprefetch; - u32 tram_ctl[2]; - u32 dram_ctl[2]; + u32 tram_ctl[2]; + u32 dram_ctl[2]; }; static int v5l2_enable(struct udevice *dev) diff --git a/drivers/cache/sandbox_cache.c b/drivers/cache/sandbox_cache.c index 0fb767e433..955dfc8a0f 100644 --- a/drivers/cache/sandbox_cache.c +++ b/drivers/cache/sandbox_cache.c @@ -31,7 +31,7 @@ static int snadbox_disable(struct udevice *dev) static const struct cache_ops sandbox_cache_ops = { .get_info = sandbox_get_info, - .enable = sandbox_enable, + .enable = sandbox_enable, .disable = snadbox_disable, }; diff --git a/drivers/clk/imx/clk-pllv3.c b/drivers/clk/imx/clk-pllv3.c index b5cbf80054..077757efcb 100644 --- a/drivers/clk/imx/clk-pllv3.c +++ b/drivers/clk/imx/clk-pllv3.c @@ -160,7 +160,7 @@ static ulong clk_pllv3_sys_set_rate(struct clk *clk, ulong rate) } static const struct clk_ops clk_pllv3_sys_ops = { - .enable = clk_pllv3_generic_enable, + .enable = clk_pllv3_generic_enable, .disable = clk_pllv3_generic_disable, .get_rate = clk_pllv3_sys_get_rate, .set_rate = clk_pllv3_sys_set_rate, diff --git a/drivers/crypto/Makefile b/drivers/crypto/Makefile index 4a12b56be6..e8bae43e3f 100644 --- a/drivers/crypto/Makefile +++ b/drivers/crypto/Makefile @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0+ # # Copyright (c) 2013 Samsung Electronics Co., Ltd. -# http://www.samsung.com +# http://www.samsung.com obj-$(CONFIG_EXYNOS_ACE_SHA) += ace_sha.o obj-y += rsa_mod_exp/ diff --git a/drivers/ddr/fsl/ddr3_dimm_params.c b/drivers/ddr/fsl/ddr3_dimm_params.c index 8464438c54..1f8db90c45 100644 --- a/drivers/ddr/fsl/ddr3_dimm_params.c +++ b/drivers/ddr/fsl/ddr3_dimm_params.c @@ -36,18 +36,18 @@ * 0110 16Gb 2GB * * SPD byte8 - module memory bus width - * bit[2:0] primary bus width + * bit[2:0] primary bus width * 000 8bits - * 001 16bits - * 010 32bits - * 011 64bits + * 001 16bits + * 010 32bits + * 011 64bits * * SPD byte7 - module organiztion - * bit[2:0] sdram device width - * 000 4bits - * 001 8bits - * 010 16bits - * 011 32bits + * bit[2:0] sdram device width + * 000 4bits + * 001 8bits + * 010 16bits + * 011 32bits * */ static unsigned long long diff --git a/drivers/ddr/marvell/axp/ddr3_spd.c b/drivers/ddr/marvell/axp/ddr3_spd.c index e2305d8814..dd772e63ab 100644 --- a/drivers/ddr/marvell/axp/ddr3_spd.c +++ b/drivers/ddr/marvell/axp/ddr3_spd.c @@ -46,7 +46,7 @@ #define SPD_COL_NUM_MASK (7 << SPD_COL_NUM_OFF) #define SPD_MODULE_ORG_BYTE 7 -#define SPD_MODULE_SDRAM_DEV_WIDTH_OFF 0 +#define SPD_MODULE_SDRAM_DEV_WIDTH_OFF 0 #define SPD_MODULE_SDRAM_DEV_WIDTH_MASK (7 << SPD_MODULE_SDRAM_DEV_WIDTH_OFF) #define SPD_MODULE_BANK_NUM_MIN 1 #define SPD_MODULE_BANK_NUM_OFF 3 diff --git a/drivers/firmware/scmi/Makefile b/drivers/firmware/scmi/Makefile index e1e0224066..966475ec10 100644 --- a/drivers/firmware/scmi/Makefile +++ b/drivers/firmware/scmi/Makefile @@ -1,5 +1,5 @@ obj-y += scmi_agent-uclass.o obj-y += smt.o -obj-$(CONFIG_ARM_SMCCC) += smccc_agent.o +obj-$(CONFIG_ARM_SMCCC) += smccc_agent.o obj-$(CONFIG_DM_MAILBOX) += mailbox_agent.o obj-$(CONFIG_SANDBOX) += sandbox-scmi_agent.o sandbox-scmi_devices.o diff --git a/drivers/i2c/designware_i2c.h b/drivers/i2c/designware_i2c.h index 9b2349a0a2..b56d7dd22f 100644 --- a/drivers/i2c/designware_i2c.h +++ b/drivers/i2c/designware_i2c.h @@ -112,7 +112,7 @@ struct i2c_regs { #define IC_TX_EMPTY 0x0010 #define IC_TX_OVER 0x0008 #define IC_RX_FULL 0x0004 -#define IC_RX_OVER 0x0002 +#define IC_RX_OVER 0x0002 #define IC_RX_UNDER 0x0001 /* fifo threshold register definitions */ diff --git a/drivers/misc/atsha204a-i2c.c b/drivers/misc/atsha204a-i2c.c index 52d9eadf49..715dabb279 100644 --- a/drivers/misc/atsha204a-i2c.c +++ b/drivers/misc/atsha204a-i2c.c @@ -2,8 +2,8 @@ * I2C Driver for Atmel ATSHA204 over I2C * * Copyright (C) 2014 Josh Datko, Cryptotronix, jbd@cryptotronix.com - * 2016 Tomas Hlavacek, CZ.NIC, tmshlvck@gmail.com - * 2017 Marek Behun, CZ.NIC, marek.behun@nic.cz + * 2016 Tomas Hlavacek, CZ.NIC, tmshlvck@gmail.com + * 2017 Marek Behun, CZ.NIC, marek.behun@nic.cz * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 as @@ -40,11 +40,11 @@ DECLARE_GLOBAL_DATA_PTR; * * int i, j; * for (i = 0; i < 256; ++i) { - * u8 c = 0; - * for (j = 0; j < 8; ++j) { - * c = (c << 1) | ((i >> j) & 1); - * } - * bitreverse_table[i] = c; + * u8 c = 0; + * for (j = 0; j < 8; ++j) { + * c = (c << 1) | ((i >> j) & 1); + * } + * bitreverse_table[i] = c; * } */ @@ -88,14 +88,14 @@ static u8 const bitreverse_table[256] = { * * int i, j; * for (i = 0; i < 256; ++i) { - * u16 c = i << 8; - * for (j = 0; j < 8; ++j) { - * int b = c >> 15; - * c <<= 1; - * if (b) - * c ^= 0x8005; - * } - * crc16_table[i] = c; + * u16 c = i << 8; + * for (j = 0; j < 8; ++j) { + * int b = c >> 15; + * c <<= 1; + * if (b) + * c ^= 0x8005; + * } + * crc16_table[i] = c; * } */ static u16 const crc16_table[256] = { diff --git a/drivers/misc/cros_ec.c b/drivers/misc/cros_ec.c index 1bbc0f98ae..c627c1df6c 100644 --- a/drivers/misc/cros_ec.c +++ b/drivers/misc/cros_ec.c @@ -414,7 +414,7 @@ static int ec_command(struct udevice *dev, uint cmd, int cmd_version, int cros_ec_scan_keyboard(struct udevice *dev, struct mbkp_keyscan *scan) { - if (ec_command(dev, EC_CMD_MKBP_STATE, 0, NULL, 0, scan, + if (ec_command(dev, EC_CMD_MKBP_STATE, 0, NULL, 0, scan, sizeof(scan->data)) != sizeof(scan->data)) return -1; diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index dde6cd563f..7e819d2b3a 100644 --- a/drivers/mmc/Makefile +++ b/drivers/mmc/Makefile @@ -65,7 +65,7 @@ obj-$(CONFIG_MMC_SDHCI_PIC32) += pic32_sdhci.o obj-$(CONFIG_MMC_SDHCI_ROCKCHIP) += rockchip_sdhci.o obj-$(CONFIG_MMC_SDHCI_S5P) += s5p_sdhci.o obj-$(CONFIG_MMC_SDHCI_SPEAR) += spear_sdhci.o -obj-$(CONFIG_MMC_SDHCI_STI) += sti_sdhci.o +obj-$(CONFIG_MMC_SDHCI_STI) += sti_sdhci.o obj-$(CONFIG_MMC_SDHCI_TANGIER) += tangier_sdhci.o obj-$(CONFIG_MMC_SDHCI_TEGRA) += tegra_mmc.o obj-$(CONFIG_MMC_SDHCI_XENON) += xenon_sdhci.o diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index d3babbfeb1..ba54b19c14 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -699,7 +699,7 @@ static int mmc_send_op_cond(struct mmc *mmc) mmc_go_idle(mmc); start = get_timer(0); - /* Asking to the card its capabilities */ + /* Asking to the card its capabilities */ for (i = 0; ; i++) { err = mmc_send_op_cond_iter(mmc, i != 0); if (err) diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index d0351b2c6a..9496903e86 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -799,8 +799,8 @@ static bool mtd_device_matches_name(struct mtd_info *mtd, const char *name) * device name * @name: MTD device name to open * - * This function returns MTD device description structure in case of - * success and an error code in case of failure. + * This function returns MTD device description structure in case of + * success and an error code in case of failure. */ struct mtd_info *get_mtd_device_nm(const char *name) { diff --git a/drivers/mtd/nand/raw/davinci_nand.c b/drivers/mtd/nand/raw/davinci_nand.c index ef8e85a002..e4860561f8 100644 --- a/drivers/mtd/nand/raw/davinci_nand.c +++ b/drivers/mtd/nand/raw/davinci_nand.c @@ -39,7 +39,7 @@ #define NAND_TIMEOUT 10240 #define NAND_ECC_BUSY 0xC #define NAND_4BITECC_MASK 0x03FF03FF -#define EMIF_NANDFSR_ECC_STATE_MASK 0x00000F00 +#define EMIF_NANDFSR_ECC_STATE_MASK 0x00000F00 #define ECC_STATE_NO_ERR 0x0 #define ECC_STATE_TOO_MANY_ERRS 0x1 #define ECC_STATE_ERR_CORR_COMP_P 0x2 diff --git a/drivers/mtd/nand/raw/fsl_elbc_nand.c b/drivers/mtd/nand/raw/fsl_elbc_nand.c index 0c1bd7b474..ddfd75d32d 100644 --- a/drivers/mtd/nand/raw/fsl_elbc_nand.c +++ b/drivers/mtd/nand/raw/fsl_elbc_nand.c @@ -716,7 +716,7 @@ static int fsl_elbc_chip_init(int devnum, u8 *addr) nand->bbt_td = &bbt_main_descr; nand->bbt_md = &bbt_mirror_descr; - /* set up nand options */ + /* set up nand options */ nand->options = NAND_NO_SUBPAGE_WRITE; nand->bbt_options = NAND_BBT_USE_FLASH; diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c index 0c26e1d9e6..b533683dfe 100644 --- a/drivers/mtd/nand/raw/nand_base.c +++ b/drivers/mtd/nand/raw/nand_base.c @@ -263,7 +263,7 @@ static void ioread8_rep(void *addr, uint8_t *buf, int len) static void ioread16_rep(void *addr, void *buf, int len) { int i; - u16 *p = (u16 *) buf; + u16 *p = (u16 *) buf; for (i = 0; i < len; i++) p[i] = readw(addr); @@ -905,11 +905,11 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip) if (ret) return ret; - u32 timer = (CONFIG_SYS_HZ * timeo) / 1000; - u32 time_start; + u32 timer = (CONFIG_SYS_HZ * timeo) / 1000; + u32 time_start; - time_start = get_timer(0); - while (get_timer(time_start) < timer) { + time_start = get_timer(0); + while (get_timer(time_start) < timer) { if (chip->dev_ready) { if (chip->dev_ready(mtd)) break; diff --git a/drivers/mtd/nand/raw/nand_ids.c b/drivers/mtd/nand/raw/nand_ids.c index 3104f879f6..2a50f0b214 100644 --- a/drivers/mtd/nand/raw/nand_ids.c +++ b/drivers/mtd/nand/raw/nand_ids.c @@ -30,7 +30,7 @@ struct nand_flash_dev nand_flash_ids[] = { LEGACY_ID_NAND("NAND 1MiB 3,3V 8-bit", 0xe8, 1, SZ_4K, SP_OPTIONS), LEGACY_ID_NAND("NAND 1MiB 3,3V 8-bit", 0xec, 1, SZ_4K, SP_OPTIONS), LEGACY_ID_NAND("NAND 2MiB 3,3V 8-bit", 0xea, 2, SZ_4K, SP_OPTIONS), - LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xd5, 4, SZ_8K, SP_OPTIONS), + LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xd5, 4, SZ_8K, SP_OPTIONS), LEGACY_ID_NAND("NAND 8MiB 3,3V 8-bit", 0xe6, 8, SZ_8K, SP_OPTIONS), #endif diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c index 09daa0dd36..46aeef258d 100644 --- a/drivers/mtd/onenand/onenand_base.c +++ b/drivers/mtd/onenand/onenand_base.c @@ -2306,8 +2306,8 @@ static int flexonenand_get_boundary(struct mtd_info *mtd) /** * flexonenand_get_size - Fill up fields in onenand_chip and mtd_info - * boundary[], diesize[], mtd->size, mtd->erasesize, - * mtd->eraseregions + * boundary[], diesize[], mtd->size, mtd->erasesize, + * mtd->eraseregions * @param mtd - MTD device structure */ static void flexonenand_get_size(struct mtd_info *mtd) diff --git a/drivers/mtd/spi/spi-nor-ids.c b/drivers/mtd/spi/spi-nor-ids.c index 4aef1ddd6e..0bff52d5f2 100644 --- a/drivers/mtd/spi/spi-nor-ids.c +++ b/drivers/mtd/spi/spi-nor-ids.c @@ -76,7 +76,7 @@ const struct flash_info spi_nor_ids[] = { { INFO("at45db321d", 0x1f2700, 0, 64 * 1024, 64, SECT_4K) }, { INFO("at45db641d", 0x1f2800, 0, 64 * 1024, 128, SECT_4K) }, { INFO("at25sl321", 0x1f4216, 0, 64 * 1024, 64, SECT_4K) }, - { INFO("at26df081a", 0x1f4501, 0, 64 * 1024, 16, SECT_4K) }, + { INFO("at26df081a", 0x1f4501, 0, 64 * 1024, 16, SECT_4K) }, #endif #ifdef CONFIG_SPI_FLASH_EON /* EON */ /* EON -- en25xxx */ diff --git a/drivers/mtd/ubi/crc32.c b/drivers/mtd/ubi/crc32.c index 9ce061c861..35820c753e 100644 --- a/drivers/mtd/ubi/crc32.c +++ b/drivers/mtd/ubi/crc32.c @@ -293,8 +293,8 @@ EXPORT_SYMBOL(crc32_be); * * A big-endian CRC written this way would be coded like: * for (i = 0; i < input_bits; i++) { - * multiple = remainder & 0x80000000 ? CRCPOLY : 0; - * remainder = (remainder << 1 | next_input_bit()) ^ multiple; + * multiple = remainder & 0x80000000 ? CRCPOLY : 0; + * remainder = (remainder << 1 | next_input_bit()) ^ multiple; * } * Notice how, to get at bit 32 of the shifted remainder, we look * at bit 31 of the remainder *before* shifting it. @@ -313,14 +313,14 @@ EXPORT_SYMBOL(crc32_be); * This changes the code to: * for (i = 0; i < input_bits; i++) { * remainder ^= next_input_bit() << 31; - * multiple = (remainder & 0x80000000) ? CRCPOLY : 0; - * remainder = (remainder << 1) ^ multiple; + * multiple = (remainder & 0x80000000) ? CRCPOLY : 0; + * remainder = (remainder << 1) ^ multiple; * } * With this optimization, the little-endian code is simpler: * for (i = 0; i < input_bits; i++) { * remainder ^= next_input_bit(); - * multiple = (remainder & 1) ? CRCPOLY : 0; - * remainder = (remainder >> 1) ^ multiple; + * multiple = (remainder & 1) ? CRCPOLY : 0; + * remainder = (remainder >> 1) ^ multiple; * } * * Note that the other details of endianness have been hidden in CRCPOLY @@ -330,19 +330,19 @@ EXPORT_SYMBOL(crc32_be); * order, we can actually do the merging 8 or more bits at a time rather * than one bit at a time: * for (i = 0; i < input_bytes; i++) { - * remainder ^= next_input_byte() << 24; - * for (j = 0; j < 8; j++) { - * multiple = (remainder & 0x80000000) ? CRCPOLY : 0; - * remainder = (remainder << 1) ^ multiple; - * } + * remainder ^= next_input_byte() << 24; + * for (j = 0; j < 8; j++) { + * multiple = (remainder & 0x80000000) ? CRCPOLY : 0; + * remainder = (remainder << 1) ^ multiple; + * } * } * Or in little-endian: * for (i = 0; i < input_bytes; i++) { - * remainder ^= next_input_byte(); - * for (j = 0; j < 8; j++) { - * multiple = (remainder & 1) ? CRCPOLY : 0; - * remainder = (remainder << 1) ^ multiple; - * } + * remainder ^= next_input_byte(); + * for (j = 0; j < 8; j++) { + * multiple = (remainder & 1) ? CRCPOLY : 0; + * remainder = (remainder << 1) ^ multiple; + * } * } * If the input is a multiple of 32 bits, you can even XOR in a 32-bit * word at a time and increase the inner loop count to 32. diff --git a/drivers/net/calxedaxgmac.c b/drivers/net/calxedaxgmac.c index b98d709117..eb1e2a756c 100644 --- a/drivers/net/calxedaxgmac.c +++ b/drivers/net/calxedaxgmac.c @@ -587,7 +587,7 @@ static const struct eth_ops xgmac_eth_ops = { .start = xgmac_eth_start, .send = xgmac_tx, .recv = xgmac_rx, - .free_pkt = xgmac_free_pkt, + .free_pkt = xgmac_free_pkt, .stop = xgmac_eth_stop, .write_hwaddr = xgmac_eth_write_hwaddr, .read_rom_hwaddr = xgmac_eth_read_rom_hwaddr, diff --git a/drivers/net/dm9000x.c b/drivers/net/dm9000x.c index e46a269af9..4f062e99d9 100644 --- a/drivers/net/dm9000x.c +++ b/drivers/net/dm9000x.c @@ -28,7 +28,7 @@ v1.2 03/18/2003 Weilun Huang <weilun_huang@davicom.com.tw>: -------------------------------------- 12/15/2003 Initial port to u-boot by - Sascha Hauer <saschahauer@web.de> + Sascha Hauer <saschahauer@web.de> 06/03/2008 Remy Bohmer <linux@bohmer.net> - Fixed the driver to work with DM9000A. @@ -66,7 +66,7 @@ TODO: external MII is not functional, only internal at the moment. #define DM9000_DBG(fmt,args...) printf(fmt, ##args) #define DM9000_DMP_PACKET(func,packet,length) \ do { \ - int i; \ + int i; \ printf("%s: length: %d\n", func, length); \ for (i = 0; i < length; i++) { \ if (i % 8 == 0) \ diff --git a/drivers/net/e1000.h b/drivers/net/e1000.h index 082154a997..f96f12c8f4 100644 --- a/drivers/net/e1000.h +++ b/drivers/net/e1000.h @@ -249,7 +249,7 @@ struct e1000_phy_stats { #define E1000_ERR_MASTER_REQUESTS_PENDING 10 #define E1000_ERR_HOST_INTERFACE_COMMAND 11 #define E1000_BLK_PHY_RESET 12 -#define E1000_ERR_SWFW_SYNC 13 +#define E1000_ERR_SWFW_SYNC 13 /* PCI Device IDs */ #define E1000_DEV_ID_82542 0x1000 diff --git a/drivers/net/smc911x.h b/drivers/net/smc911x.h index 0a27f3c43e..59018f00b2 100644 --- a/drivers/net/smc911x.h +++ b/drivers/net/smc911x.h @@ -13,9 +13,9 @@ /* Below are the register offsets and bit definitions * of the Lan911x memory space */ -#define RX_DATA_FIFO 0x00 +#define RX_DATA_FIFO 0x00 -#define TX_DATA_FIFO 0x20 +#define TX_DATA_FIFO 0x20 #define TX_CMD_A_INT_ON_COMP 0x80000000 #define TX_CMD_A_INT_BUF_END_ALGN 0x03000000 #define TX_CMD_A_INT_4_BYTE_ALGN 0x00000000 diff --git a/drivers/net/sun8i_emac.c b/drivers/net/sun8i_emac.c index d7553fe163..a6eb82bd16 100644 --- a/drivers/net/sun8i_emac.c +++ b/drivers/net/sun8i_emac.c @@ -403,7 +403,7 @@ static int sun8i_phy_init(struct emac_eth_dev *priv, void *dev) } #define cache_clean_descriptor(desc) \ - flush_dcache_range((uintptr_t)(desc), \ + flush_dcache_range((uintptr_t)(desc), \ (uintptr_t)(desc) + sizeof(struct emac_dma_desc)) #define cache_inv_descriptor(desc) \ diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c index fc3327ec53..c544af2a0b 100644 --- a/drivers/pci/fsl_pci_init.c +++ b/drivers/pci/fsl_pci_init.c @@ -885,7 +885,7 @@ int fsl_pcie_init_board(int busno) setbits_be32(addr, _DEVDISR_PCIE4); /* disable */ #endif - return busno; + return busno; } #else int fsl_pcie_init_ctrl(int busno, u32 devdisr, enum srds_prtcl dev, diff --git a/drivers/pinctrl/meson/pinctrl-meson-axg.c b/drivers/pinctrl/meson/pinctrl-meson-axg.c index 5d234bca3d..820a6c9bb1 100644 --- a/drivers/pinctrl/meson/pinctrl-meson-axg.c +++ b/drivers/pinctrl/meson/pinctrl-meson-axg.c @@ -908,7 +908,7 @@ static struct meson_bank meson_axg_aobus_banks[] = { }; static struct meson_pmx_bank meson_axg_periphs_pmx_banks[] = { - /* name first last reg offset */ + /* name first last reg offset */ BANK_PMX("Z", PIN(GPIOZ_0, EE_OFF), PIN(GPIOZ_10, EE_OFF), 0x2, 0), BANK_PMX("BOOT", PIN(BOOT_0, EE_OFF), PIN(BOOT_14, EE_OFF), 0x0, 0), BANK_PMX("A", PIN(GPIOA_0, EE_OFF), PIN(GPIOA_20, EE_OFF), 0xb, 0), diff --git a/drivers/pinctrl/meson/pinctrl-meson-g12a.c b/drivers/pinctrl/meson/pinctrl-meson-g12a.c index 8bd265ad95..90a4f8056c 100644 --- a/drivers/pinctrl/meson/pinctrl-meson-g12a.c +++ b/drivers/pinctrl/meson/pinctrl-meson-g12a.c @@ -1220,7 +1220,7 @@ static struct meson_bank meson_g12a_aobus_banks[] = { }; static struct meson_pmx_bank meson_g12a_periphs_pmx_banks[] = { - /* name first last reg offset */ + /* name first last reg offset */ BANK_PMX("Z", PIN(GPIOZ_0, EE_OFF), PIN(GPIOZ_15, EE_OFF), 0x6, 0), BANK_PMX("H", PIN(GPIOH_0, EE_OFF), PIN(GPIOH_8, EE_OFF), 0xb, 0), BANK_PMX("BOOT", PIN(BOOT_0, EE_OFF), PIN(BOOT_15, EE_OFF), 0x0, 0), diff --git a/drivers/pinctrl/renesas/pfc-r8a77970.c b/drivers/pinctrl/renesas/pfc-r8a77970.c index 4e6f406214..8cf133a2ba 100644 --- a/drivers/pinctrl/renesas/pfc-r8a77970.c +++ b/drivers/pinctrl/renesas/pfc-r8a77970.c @@ -161,7 +161,7 @@ #define IP0_31_28 FM(DU_DG3) FM(MSIOF3_SS2) F_(0, 0) FM(A7) FM(PWMFSW0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) #define IP1_3_0 FM(DU_DG4) F_(0, 0) F_(0, 0) FM(A8) FM(FSO_CFE_0_N_A) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) #define IP1_7_4 FM(DU_DG5) F_(0, 0) F_(0, 0) FM(A9) FM(FSO_CFE_1_N_A) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) -#define IP1_11_8 FM(DU_DG6) F_(0, 0) F_(0, 0) FM(A10) FM(FSO_TOE_N_A) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) +#define IP1_11_8 FM(DU_DG6) F_(0, 0) F_(0, 0) FM(A10) FM(FSO_TOE_N_A) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) #define IP1_15_12 FM(DU_DG7) F_(0, 0) F_(0, 0) FM(A11) FM(IRQ1) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) #define IP1_19_16 FM(DU_DB2) F_(0, 0) F_(0, 0) FM(A12) FM(IRQ2) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) #define IP1_23_20 FM(DU_DB3) F_(0, 0) F_(0, 0) FM(A13) FM(FXR_CLKOUT1) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) diff --git a/drivers/pinctrl/renesas/pfc-r8a77980.c b/drivers/pinctrl/renesas/pfc-r8a77980.c index 2d15500f0f..7cd4ef9830 100644 --- a/drivers/pinctrl/renesas/pfc-r8a77980.c +++ b/drivers/pinctrl/renesas/pfc-r8a77980.c @@ -88,7 +88,7 @@ #define GPSR1_0 F_(IRQ0, IP2_27_24) /* GPSR2 */ -#define GPSR2_29 F_(FSO_TOE_N, IP10_19_16) +#define GPSR2_29 F_(FSO_TOE_N, IP10_19_16) #define GPSR2_28 F_(FSO_CFE_1_N, IP10_15_12) #define GPSR2_27 F_(FSO_CFE_0_N, IP10_11_8) #define GPSR2_26 F_(SDA3, IP10_7_4) @@ -253,11 +253,11 @@ #define IP8_11_8 FM(CANFD0_RX_A) FM(RXDA_EXTFXR) FM(PWM1_B) FM(DU_CDE) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) #define IP8_15_12 FM(CANFD1_TX) FM(FXR_TXDB) FM(PWM2_B) FM(TCLK1_B) FM(TX1_B) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) #define IP8_19_16 FM(CANFD1_RX) FM(RXDB_EXTFXR) FM(PWM3_B) FM(TCLK2_B) FM(RX1_B) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) -#define IP8_23_20 FM(CANFD_CLK_A) FM(CLK_EXTFXR) FM(PWM4_B) FM(SPEEDIN_B) FM(SCIF_CLK_B) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) +#define IP8_23_20 FM(CANFD_CLK_A) FM(CLK_EXTFXR) FM(PWM4_B) FM(SPEEDIN_B) FM(SCIF_CLK_B) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) #define IP8_27_24 FM(DIGRF_CLKIN) FM(DIGRF_CLKEN_IN) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) #define IP8_31_28 FM(DIGRF_CLKOUT) FM(DIGRF_CLKEN_OUT) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) #define IP9_3_0 FM(IRQ4) F_(0, 0) F_(0, 0) FM(VI0_DATA12) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) -#define IP9_7_4 FM(IRQ5) F_(0, 0) F_(0, 0) FM(VI0_DATA13) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) +#define IP9_7_4 FM(IRQ5) F_(0, 0) F_(0, 0) FM(VI0_DATA13) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) #define IP9_11_8 FM(MSIOF0_RXD) FM(DU_DR0) F_(0, 0) FM(VI0_DATA14) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) #define IP9_15_12 FM(MSIOF0_TXD) FM(DU_DR1) F_(0, 0) FM(VI0_DATA15) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) #define IP9_19_16 FM(MSIOF0_SCK) FM(DU_DG0) F_(0, 0) FM(VI0_DATA16) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) diff --git a/drivers/power/pmic/pmic_tps65910.c b/drivers/power/pmic/pmic_tps65910.c index fcd0a654a8..e3de730821 100644 --- a/drivers/power/pmic/pmic_tps65910.c +++ b/drivers/power/pmic/pmic_tps65910.c @@ -51,7 +51,7 @@ int power_tps65910_init(unsigned char bus) /* * tps65910_set_i2c_control() - Set the TPS65910 to be controlled via the I2C - * interface. + * interface. * @return: 0 on success, not 0 on failure */ int tps65910_set_i2c_control(void) diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c index 03eeacc286..2311910a63 100644 --- a/drivers/pwm/pwm-meson.c +++ b/drivers/pwm/pwm-meson.c @@ -401,7 +401,7 @@ static const struct pwm_ops meson_pwm_ops = { .set_invert = meson_pwm_set_invert, }; -#define XTAL -1 +#define XTAL -1 /* Local clock ids aliases to avoid define conflicts */ #define GXBB_CLKID_HDMI_PLL 2 diff --git a/drivers/ram/k3-ddrss/k3-ddrss.c b/drivers/ram/k3-ddrss/k3-ddrss.c index cb8edcbc15..95b5cf9128 100644 --- a/drivers/ram/k3-ddrss/k3-ddrss.c +++ b/drivers/ram/k3-ddrss/k3-ddrss.c @@ -27,8 +27,8 @@ #define CTRLMMR_DDR4_FSP_CLKCHNG_REQ_OFFS 0x80 #define CTRLMMR_DDR4_FSP_CLKCHNG_ACK_OFFS 0xc0 -#define DDRSS_V2A_R1_MAT_REG 0x0020 -#define DDRSS_ECC_CTRL_REG 0x0120 +#define DDRSS_V2A_R1_MAT_REG 0x0020 +#define DDRSS_ECC_CTRL_REG 0x0120 struct k3_ddrss_desc { struct udevice *dev; diff --git a/drivers/spi/atcspi200_spi.c b/drivers/spi/atcspi200_spi.c index 775b9ffc25..de9c14837c 100644 --- a/drivers/spi/atcspi200_spi.c +++ b/drivers/spi/atcspi200_spi.c @@ -81,7 +81,7 @@ struct nds_spi_slave { unsigned int freq; ulong clock; unsigned int mode; - u8 num_cs; + u8 num_cs; unsigned int mtiming; size_t cmd_len; u8 cmd_buf[16]; diff --git a/drivers/thermal/imx_tmu.c b/drivers/thermal/imx_tmu.c index 07766baf45..ca45abbb8e 100644 --- a/drivers/thermal/imx_tmu.c +++ b/drivers/thermal/imx_tmu.c @@ -22,8 +22,8 @@ DECLARE_GLOBAL_DATA_PTR; #define SITES_MAX 16 -#define FLAGS_VER2 0x1 -#define FLAGS_VER3 0x2 +#define FLAGS_VER2 0x1 +#define FLAGS_VER3 0x2 #define TMR_DISABLE 0x0 #define TMR_ME 0x80000000 diff --git a/drivers/timer/atmel_pit_timer.c b/drivers/timer/atmel_pit_timer.c index 3178e58884..5cf46f224a 100644 --- a/drivers/timer/atmel_pit_timer.c +++ b/drivers/timer/atmel_pit_timer.c @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0+ /* * Copyright (C) 2017 Microchip Corporation - * Wenyou.Yang <wenyou.yang@microchip.com> + * Wenyou.Yang <wenyou.yang@microchip.com> */ #include <common.h> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 44533fd7fe..1502cb859a 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -691,8 +691,8 @@ struct dwc3_scratchpad_array { * @has_lpm_erratum: true when core was configured with LPM Erratum. Note that * there's now way for software to detect this in runtime. * @is_utmi_l1_suspend: the core asserts output signal - * 0 - utmi_sleep_n - * 1 - utmi_l1_suspend_n + * 0 - utmi_sleep_n + * 1 - utmi_l1_suspend_n * @is_selfpowered: true when we are selfpowered * @is_fpga: true when we are using the FPGA board * @needs_fifo_resize: not all users might want fifo resizing, flag it @@ -713,10 +713,10 @@ struct dwc3_scratchpad_array { * @dis_u2_susphy_quirk: set if we disable usb2 suspend phy * @tx_de_emphasis_quirk: set if we enable Tx de-emphasis quirk * @tx_de_emphasis: Tx de-emphasis value - * 0 - -6dB de-emphasis - * 1 - -3.5dB de-emphasis - * 2 - No de-emphasis - * 3 - Reserved + * 0 - -6dB de-emphasis + * 1 - -3.5dB de-emphasis + * 2 - No de-emphasis + * 3 - Reserved * @index: index of _this_ controller * @list: to maintain the list of dwc3 controllers */ diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 4e68fb0a82..eb416b832a 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2209,7 +2209,7 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc) * BESL value in the LPM token is less than or equal to LPM * NYET threshold. */ - if (dwc->revision < DWC3_REVISION_240A && dwc->has_lpm_erratum) + if (dwc->revision < DWC3_REVISION_240A && dwc->has_lpm_erratum) WARN(true, "LPM Erratum not available on dwc3 revisisions < 2.40a\n"); if (dwc->has_lpm_erratum && dwc->revision >= DWC3_REVISION_240A) diff --git a/drivers/usb/gadget/at91_udc.h b/drivers/usb/gadget/at91_udc.h index 96a521ee08..e18de0e2f0 100644 --- a/drivers/usb/gadget/at91_udc.h +++ b/drivers/usb/gadget/at91_udc.h @@ -35,7 +35,7 @@ #define AT91_UDP_ISR 0x1c /* Interrupt Status Register */ #define AT91_UDP_EP(n) (1 << (n)) /* Endpoint Interrupt Status */ -#define AT91_UDP_RXSUSP (1 << 8) /* USB Suspend Interrupt Status */ +#define AT91_UDP_RXSUSP (1 << 8) /* USB Suspend Interrupt Status */ #define AT91_UDP_RXRSM (1 << 9) /* USB Resume Interrupt Status */ #define AT91_UDP_EXTRSM (1 << 10) /* External Resume Interrupt Status [AT91RM9200 only] */ #define AT91_UDP_SOFINT (1 << 11) /* Start of Frame Interrupt Status */ diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c index ba362b8f25..583ceb4d55 100644 --- a/drivers/usb/gadget/pxa27x_udc.c +++ b/drivers/usb/gadget/pxa27x_udc.c @@ -472,7 +472,7 @@ void udc_irq(void) * so using '|=' isn't safe as it may ack an interrupt. */ #define UDCCR_OEN (1 << 31) /* On-the-Go Enable */ -#define UDCCR_MASK_BITS (UDCCR_OEN | UDCCR_UDE) +#define UDCCR_MASK_BITS (UDCCR_OEN | UDCCR_UDE) static inline void udc_set_mask_UDCCR(int mask) { diff --git a/drivers/usb/host/xhci-rcar-r8a779x_usb3_v3.h b/drivers/usb/host/xhci-rcar-r8a779x_usb3_v3.h index f0f48a3354..8db88f0dcf 100644 --- a/drivers/usb/host/xhci-rcar-r8a779x_usb3_v3.h +++ b/drivers/usb/host/xhci-rcar-r8a779x_usb3_v3.h @@ -40,7 +40,7 @@ * * To generate the content of the array below, use ie. the following command: * $ hexdump -v -e '/4 "0x%08x, "' r8a779x_usb3_v3.dlmem | \ - * sed "s@\(.\{47\}\) @\1\n@g" + * sed "s@\(.\{47\}\) @\1\n@g" * * [1] git://git.kernel.org/pub/scm/linux/kernel/git/dwmw2/linux-firmware.git */ diff --git a/drivers/usb/musb-new/musb_gadget.c b/drivers/usb/musb-new/musb_gadget.c index 5b149dac6d..1fef00b292 100644 --- a/drivers/usb/musb-new/musb_gadget.c +++ b/drivers/usb/musb-new/musb_gadget.c @@ -995,8 +995,8 @@ void musb_g_rx(struct musb *musb, u8 epnum) && (musb_ep->dma->actual_len == musb_ep->packet_sz)) { /* In double buffer case, continue to unload fifo if - * there is Rx packet in FIFO. - **/ + * there is Rx packet in FIFO. + **/ csr = musb_readw(epio, MUSB_RXCSR); if ((csr & MUSB_RXCSR_RXPKTRDY) && hw_ep->rx_double_buffered) diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index e5d8ac7028..47b839c083 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -207,14 +207,14 @@ struct musb_regs { /* TxType/RxType */ #define MUSB_TYPE_SPEED 0xc0 #define MUSB_TYPE_SPEED_SHIFT 6 -#define MUSB_TYPE_SPEED_HIGH 1 -#define MUSB_TYPE_SPEED_FULL 2 +#define MUSB_TYPE_SPEED_HIGH 1 +#define MUSB_TYPE_SPEED_FULL 2 #define MUSB_TYPE_SPEED_LOW 3 #define MUSB_TYPE_PROTO 0x30 /* Implicitly zero for ep0 */ #define MUSB_TYPE_PROTO_SHIFT 4 #define MUSB_TYPE_REMOTE_END 0xf /* Implicitly zero for ep0 */ -#define MUSB_TYPE_PROTO_BULK 2 -#define MUSB_TYPE_PROTO_INTR 3 +#define MUSB_TYPE_PROTO_BULK 2 +#define MUSB_TYPE_PROTO_INTR 3 /* CONFIGDATA */ #define MUSB_CONFIGDATA_MPRXE 0x80 /* Auto bulk pkt combining */ @@ -304,7 +304,7 @@ struct musb_regs { * values are not supported */ struct musb_epinfo { - u8 epnum; /* endpoint number */ + u8 epnum; /* endpoint number */ u8 epdir; /* endpoint direction */ u16 epsize; /* endpoint FIFO size */ }; diff --git a/drivers/usb/musb/musb_hcd.c b/drivers/usb/musb/musb_hcd.c index ffed3b82be..17901704f5 100644 --- a/drivers/usb/musb/musb_hcd.c +++ b/drivers/usb/musb/musb_hcd.c @@ -14,7 +14,7 @@ #include "musb_hcd.h" /* MSC control transfers */ -#define USB_MSC_BBB_RESET 0xFF +#define USB_MSC_BBB_RESET 0xFF #define USB_MSC_BBB_GET_MAX_LUN 0xFE /* Endpoint configuration information */ diff --git a/drivers/video/bus_vcxk.c b/drivers/video/bus_vcxk.c index 2a72d23eb8..3863662d9f 100644 --- a/drivers/video/bus_vcxk.c +++ b/drivers/video/bus_vcxk.c @@ -63,8 +63,8 @@ at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE; #ifndef CONFIG_SYS_VCXK_DOUBLEBUFFERED #define VCXK_BWS(x, data) vcxk_bws[x] = data; - #define VCXK_BWS_WORD_SET(x, mask) vcxk_bws_word[x] |= mask; - #define VCXK_BWS_WORD_CLEAR(x, mask) vcxk_bws_word[x] &= ~mask; + #define VCXK_BWS_WORD_SET(x, mask) vcxk_bws_word[x] |= mask; + #define VCXK_BWS_WORD_CLEAR(x, mask) vcxk_bws_word[x] &= ~mask; #define VCXK_BWS_LONG(x, data) vcxk_bws_long[x] = data; #else u_char double_bws[16384]; @@ -83,7 +83,7 @@ at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE; #endif #define VC4K16_Bright1 vcxk_bws_word[0x20004 / 2] -#define VC4K16_Bright2 vcxk_bws_word[0x20006 / 2] +#define VC4K16_Bright2 vcxk_bws_word[0x20006 / 2] #define VC2K_Bright vcxk_bws[0x8000] #define VC8K_BrightH vcxk_bws[0xC000] #define VC8K_BrightL vcxk_bws[0xC001] @@ -263,7 +263,7 @@ void vcxk_clear(void) * set the display brightness * PARAMETER * side 1 set front side brightness - * 2 set back side brightness + * 2 set back side brightness * 3 set brightness for both sides * brightness 0..1000 *** @@ -276,7 +276,7 @@ void vcxk_setbrightness(unsigned int side, short brightness) VC4K16_Bright1 = brightness + 23; if ((side == 0) || (side & 0x2)) VC4K16_Bright2 = brightness + 23; - } else { + } else { VC2K_Bright = (brightness >> 4) + 2; VC8K_BrightH = (brightness + 23) >> 8; VC8K_BrightL = (brightness + 23) & 0xFF; diff --git a/drivers/video/mxsfb.c b/drivers/video/mxsfb.c index 523d8a8d98..98d2965711 100644 --- a/drivers/video/mxsfb.c +++ b/drivers/video/mxsfb.c @@ -54,7 +54,7 @@ __weak void mxsfb_system_setup(void) * Freescale mx23evk/mx28evk with a Seiko 4.3'' WVGA panel: * setenv videomode * video=ctfb:x:800,y:480,depth:24,mode:0,pclk:29851, - * le:89,ri:164,up:23,lo:10,hs:10,vs:10,sync:0,vmode:0 + * le:89,ri:164,up:23,lo:10,hs:10,vs:10,sync:0,vmode:0 */ static void mxs_lcd_init(struct udevice *dev, u32 fb_addr, diff --git a/drivers/watchdog/orion_wdt.c b/drivers/watchdog/orion_wdt.c index cebea426fb..c30ed82217 100644 --- a/drivers/watchdog/orion_wdt.c +++ b/drivers/watchdog/orion_wdt.c @@ -4,8 +4,8 @@ * Watchdog driver for Orion/Kirkwood processors * * Authors: Tomas Hlavacek <tmshlvck@gmail.com> - * Sylver Bruneau <sylver.bruneau@googlemail.com> - * Marek Behun <marek.behun@nic.cz> + * Sylver Bruneau <sylver.bruneau@googlemail.com> + * Marek Behun <marek.behun@nic.cz> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any |