diff options
Diffstat (limited to 'doc/device-tree-bindings')
14 files changed, 30 insertions, 30 deletions
diff --git a/doc/device-tree-bindings/chosen.txt b/doc/device-tree-bindings/chosen.txt index e5ba6720ce..c8312540f5 100644 --- a/doc/device-tree-bindings/chosen.txt +++ b/doc/device-tree-bindings/chosen.txt @@ -129,7 +129,7 @@ Example }; fs_loader0: fs-loader@0 { - u-boot,dm-pre-reloc; + bootph-all; compatible = "u-boot,fs-loader"; phandlepart = <&mmc 1>; }; diff --git a/doc/device-tree-bindings/clock/rockchip,rk3368-dmc.txt b/doc/device-tree-bindings/clock/rockchip,rk3368-dmc.txt index 8e7357d53d..da474fbabd 100644 --- a/doc/device-tree-bindings/clock/rockchip,rk3368-dmc.txt +++ b/doc/device-tree-bindings/clock/rockchip,rk3368-dmc.txt @@ -54,7 +54,7 @@ Example (for DDR3-1600K and 800MHz) #include <dt-bindings/memory/rk3368-dmc.h> dmc: dmc@ff610000 { - u-boot,dm-pre-reloc; + bootph-all; compatible = "rockchip,rk3368-dmc"; reg = <0 0xff610000 0 0x400 0 0xff620000 0 0x400>; diff --git a/doc/device-tree-bindings/clock/rockchip,rk3399-dmc.txt b/doc/device-tree-bindings/clock/rockchip,rk3399-dmc.txt index a15dc5d1f8..4a56f78f55 100644 --- a/doc/device-tree-bindings/clock/rockchip,rk3399-dmc.txt +++ b/doc/device-tree-bindings/clock/rockchip,rk3399-dmc.txt @@ -16,7 +16,7 @@ Required properties: Example: dmc: dmc { - u-boot,dm-pre-reloc; + bootph-all; compatible = "rockchip,rk3399-dmc"; devfreq-events = <&dfi>; interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH 0>; diff --git a/doc/device-tree-bindings/clock/st,stm32mp1.txt b/doc/device-tree-bindings/clock/st,stm32mp1.txt index 4d4136d2fc..e638bcef7b 100644 --- a/doc/device-tree-bindings/clock/st,stm32mp1.txt +++ b/doc/device-tree-bindings/clock/st,stm32mp1.txt @@ -251,9 +251,9 @@ Example of clock tree initialization / { clocks { - u-boot,dm-pre-reloc; + bootph-all; clk_hse: clk-hse { - u-boot,dm-pre-reloc; + bootph-all; #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; @@ -261,28 +261,28 @@ Example of clock tree initialization }; clk_hsi: clk-hsi { - u-boot,dm-pre-reloc; + bootph-all; #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <64000000>; }; clk_lse: clk-lse { - u-boot,dm-pre-reloc; + bootph-all; #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; }; clk_lsi: clk-lsi { - u-boot,dm-pre-reloc; + bootph-all; #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32000>; }; clk_csi: clk-csi { - u-boot,dm-pre-reloc; + bootph-all; #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <4000000>; @@ -292,7 +292,7 @@ Example of clock tree initialization soc { rcc: rcc@50000000 { - u-boot,dm-pre-reloc; + bootph-all; compatible = "st,stm32mp1-rcc", "syscon"; reg = <0x50000000 0x1000>; #address-cells = <1>; @@ -371,7 +371,7 @@ Example of clock tree initialization reg = <0>; cfg = < 2 80 0 0 0 PQR(1,0,0) >; frac = < 0x800 >; - u-boot,dm-pre-reloc; + bootph-all; }; /* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), @@ -381,7 +381,7 @@ Example of clock tree initialization reg = <1>; cfg = < 2 65 1 0 0 PQR(1,1,1) >; frac = < 0x1400 >; - u-boot,dm-pre-reloc; + bootph-all; }; /* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */ @@ -390,7 +390,7 @@ Example of clock tree initialization reg = <2>; cfg = < 1 33 1 16 36 PQR(1,1,1) >; frac = < 0x1a04 >; - u-boot,dm-pre-reloc; + bootph-all; }; /* VCO = 594.0 MHz => P = 99, Q = 74, R = 74 */ @@ -398,7 +398,7 @@ Example of clock tree initialization compatible = "st,stm32mp1-pll"; reg = <3>; cfg = < 3 98 5 7 7 PQR(1,1,1) >; - u-boot,dm-pre-reloc; + bootph-all; }; }; }; diff --git a/doc/device-tree-bindings/device.txt b/doc/device-tree-bindings/device.txt index 73ce2a3b5b..ef4f219e91 100644 --- a/doc/device-tree-bindings/device.txt +++ b/doc/device-tree-bindings/device.txt @@ -54,7 +54,7 @@ pcie-a0@14,0 { }; p2sb: p2sb@d,0 { - u-boot,dm-pre-reloc; + bootph-all; reg = <0x02006810 0 0 0 0>; compatible = "intel,apl-p2sb"; early-regs = <IOMAP_P2SB_BAR 0x100000>; @@ -62,12 +62,12 @@ p2sb: p2sb@d,0 { n { compatible = "intel,apl-pinctrl"; - u-boot,dm-pre-reloc; + bootph-all; intel,p2sb-port-id = <PID_GPIO_N>; acpi,path = "\\_SB.GPO0"; gpio_n: gpio-n { compatible = "intel,gpio"; - u-boot,dm-pre-reloc; + bootph-all; gpio-controller; #gpio-cells = <2>; linux-name = "INT3452:00"; diff --git a/doc/device-tree-bindings/fsp/fsp2/apollolake/fsp-s.txt b/doc/device-tree-bindings/fsp/fsp2/apollolake/fsp-s.txt index dc8e3251a3..33386ebd38 100644 --- a/doc/device-tree-bindings/fsp/fsp2/apollolake/fsp-s.txt +++ b/doc/device-tree-bindings/fsp/fsp2/apollolake/fsp-s.txt @@ -474,7 +474,7 @@ Optional properties: Example: &fsp_s { - u-boot,dm-pre-proper; + bootph-some-ram; fsps,ish-enable = <0>; fsps,enable-sata = <0>; diff --git a/doc/device-tree-bindings/memory-controller/k3-j721e-ddrss.txt b/doc/device-tree-bindings/memory-controller/k3-j721e-ddrss.txt index 1ea0a70114..2e41096aa6 100644 --- a/doc/device-tree-bindings/memory-controller/k3-j721e-ddrss.txt +++ b/doc/device-tree-bindings/memory-controller/k3-j721e-ddrss.txt @@ -57,7 +57,7 @@ memorycontroller: memorycontroller@0298e000 { ti,ddr-freq2 = <DDRSS_PLL_FREQUENCY_2>; ti,ddr-fhs-cnt = <DDRSS_PLL_FHS_CNT>; - u-boot,dm-spl; + bootph-pre-ram; ti,ctl-data = < DDRSS_CTL_00_DATA diff --git a/doc/device-tree-bindings/memory-controllers/k3-am654-ddrss.txt b/doc/device-tree-bindings/memory-controllers/k3-am654-ddrss.txt index 1e11edf7b1..792560a323 100644 --- a/doc/device-tree-bindings/memory-controllers/k3-am654-ddrss.txt +++ b/doc/device-tree-bindings/memory-controllers/k3-am654-ddrss.txt @@ -42,5 +42,5 @@ Example (AM65x): reg-names = "ss", "ctl", "phy"; clocks = <&k3_clks 20 0>; power-domains = <&k3_pds 20>; - u-boot,dm-spl; + bootph-pre-ram; }; diff --git a/doc/device-tree-bindings/misc/fs_loader.txt b/doc/device-tree-bindings/misc/fs_loader.txt index 884fbf47c0..542be4b25a 100644 --- a/doc/device-tree-bindings/misc/fs_loader.txt +++ b/doc/device-tree-bindings/misc/fs_loader.txt @@ -20,28 +20,28 @@ ubi in device tree source as shown in below: sata and ubi as shown in below: Example for mmc: fs_loader0: fs-loader@0 { - u-boot,dm-pre-reloc; + bootph-all; compatible = "u-boot,fs-loader"; phandlepart = <&mmc_0 1>; }; Example for usb: fs_loader1: fs-loader@1 { - u-boot,dm-pre-reloc; + bootph-all; compatible = "u-boot,fs-loader"; phandlepart = <&usb0 1>; }; Example for sata: fs_loader2: fs-loader@2 { - u-boot,dm-pre-reloc; + bootph-all; compatible = "u-boot,fs-loader"; phandlepart = <&sata0 1>; }; Example for ubi: fs_loader3: fs-loader@3 { - u-boot,dm-pre-reloc; + bootph-all; compatible = "u-boot,fs-loader"; mtdpart = "UBI", ubivol = "ubi0"; diff --git a/doc/device-tree-bindings/net/mdio-mux-reg.txt b/doc/device-tree-bindings/net/mdio-mux-reg.txt index 0ac34dc423..0f7c295687 100644 --- a/doc/device-tree-bindings/net/mdio-mux-reg.txt +++ b/doc/device-tree-bindings/net/mdio-mux-reg.txt @@ -16,7 +16,7 @@ Example structure, used on Freescale LS1028A QDS board: &i2c0 { status = "okay"; - u-boot,dm-pre-reloc; + bootph-all; fpga@66 { #address-cells = <1>; diff --git a/doc/device-tree-bindings/pci/x86-pci.txt b/doc/device-tree-bindings/pci/x86-pci.txt index cf4e5ed595..e6d4b37535 100644 --- a/doc/device-tree-bindings/pci/x86-pci.txt +++ b/doc/device-tree-bindings/pci/x86-pci.txt @@ -31,7 +31,7 @@ pci { compatible = "pci-x86"; #address-cells = <3>; #size-cells = <2>; - u-boot,dm-pre-reloc; + bootph-all; ranges = <0x02000000 0x0 0xc0000000 0xc0000000 0 0x10000000 0x42000000 0x0 0xb0000000 0xb0000000 0 0x10000000 0x01000000 0x0 0x1000 0x1000 0 0xefff>; @@ -41,7 +41,7 @@ pci { serial: serial@18,2 { reg = <0x0200c210 0 0 0 0>; - u-boot,dm-pre-reloc; + bootph-all; compatible = "intel,apl-ns16550"; early-regs = <0xde000000 0x20>; reg-shift = <2>; diff --git a/doc/device-tree-bindings/pinctrl/nexell,s5pxx18-pinctrl.txt b/doc/device-tree-bindings/pinctrl/nexell,s5pxx18-pinctrl.txt index 115ab53a4c..38e322db81 100644 --- a/doc/device-tree-bindings/pinctrl/nexell,s5pxx18-pinctrl.txt +++ b/doc/device-tree-bindings/pinctrl/nexell,s5pxx18-pinctrl.txt @@ -20,7 +20,7 @@ Example: pinctrl_0: pinctrl@c0010000 { compatible = "nexell,s5pxx18-pinctrl"; reg = <0xc0010000 0xf000>; - u-boot,dm-pre-reloc; + bootph-all; }; Nexell's pin configuration nodes act as a container for an arbitrary number of diff --git a/doc/device-tree-bindings/ram/fsl,mpc83xx-mem-controller.txt b/doc/device-tree-bindings/ram/fsl,mpc83xx-mem-controller.txt index da01fe908d..de498aca78 100644 --- a/doc/device-tree-bindings/ram/fsl,mpc83xx-mem-controller.txt +++ b/doc/device-tree-bindings/ram/fsl,mpc83xx-mem-controller.txt @@ -249,7 +249,7 @@ memory@2000 { compatible = "fsl,mpc83xx-mem-controller"; reg = <0x2000 0x1000>; device_type = "memory"; - u-boot,dm-pre-reloc; + bootph-all; driver_software_override = <DSO_ENABLE>; p_impedance_override = <DSO_P_IMPEDANCE_NOMINAL>; diff --git a/doc/device-tree-bindings/video/atmel-hlcdc.txt b/doc/device-tree-bindings/video/atmel-hlcdc.txt index b378cbf9de..7c9441ae8b 100644 --- a/doc/device-tree-bindings/video/atmel-hlcdc.txt +++ b/doc/device-tree-bindings/video/atmel-hlcdc.txt @@ -15,7 +15,7 @@ Required properties: Example: hlcdc: hlcdc@f0000000 { - u-boot,dm-pre-reloc; + bootph-all; compatible = "atmel,sama5d2-hlcdc"; reg = <0xf0000000 0x2000>; clocks = <&lcdc_clk>; |