diff options
Diffstat (limited to 'common/usb.c')
| -rw-r--r-- | common/usb.c | 26 |
1 files changed, 4 insertions, 22 deletions
diff --git a/common/usb.c b/common/usb.c index 4f3713d92f..df4e172ff8 100644 --- a/common/usb.c +++ b/common/usb.c @@ -905,26 +905,8 @@ int usb_new_device(struct usb_device *dev) addr = dev->devnum; dev->devnum = 0; -#ifdef CONFIG_LEGACY_USB_INIT_SEQ - /* this is the old and known way of initializing devices, it is - * different than what Windows and Linux are doing. Windows and Linux - * both retrieve 64 bytes while reading the device descriptor - * Several USB stick devices report ERR: CTL_TIMEOUT, caused by an - * invalid header while reading 8 bytes as device descriptor. */ - dev->descriptor.bMaxPacketSize0 = 8; /* Start off at 8 bytes */ - dev->maxpacketsize = PACKET_SIZE_8; - dev->epmaxpacketin[0] = 8; - dev->epmaxpacketout[0] = 8; - - err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, tmpbuf, 8); - if (err < 8) { - printf("\n USB device not responding, " \ - "giving up (status=%lX)\n", dev->status); - return -EIO; - } - memcpy(&dev->descriptor, tmpbuf, 8); -#else - /* This is a Windows scheme of initialization sequence, with double + /* + * This is a Windows scheme of initialization sequence, with double * reset of the device (Linux uses the same sequence) * Some equipment is said to work only with such init sequence; this * patch is based on the work by Alan Stern: @@ -935,7 +917,8 @@ int usb_new_device(struct usb_device *dev) struct usb_device *parent = dev->parent; unsigned short portstatus; - /* send 64-byte GET-DEVICE-DESCRIPTOR request. Since the descriptor is + /* + * send 64-byte GET-DEVICE-DESCRIPTOR request. Since the descriptor is * only 18 bytes long, this will terminate with a short packet. But if * the maxpacket size is 8 or 16 the device may be waiting to transmit * some more, or keeps on retransmitting the 8 byte header. */ @@ -993,7 +976,6 @@ int usb_new_device(struct usb_device *dev) } else { usb_reset_root_port(); } -#endif dev->epmaxpacketin[0] = dev->descriptor.bMaxPacketSize0; dev->epmaxpacketout[0] = dev->descriptor.bMaxPacketSize0; |