diff options
Diffstat (limited to 'board')
| -rw-r--r-- | board/ti/j721e/README | 227 |
1 files changed, 227 insertions, 0 deletions
diff --git a/board/ti/j721e/README b/board/ti/j721e/README new file mode 100644 index 0000000000..5be7d099db --- /dev/null +++ b/board/ti/j721e/README @@ -0,0 +1,227 @@ +Introduction: +------------- +The J721e family of SoCs are part of K3 Multicore SoC architecture platform +targeting automotive applications. They are designed as a low power, high +performance and highly integrated device architecture, adding significant +enhancement on processing power, graphics capability, video and imaging +processing, virtualization and coherent memory support. + +The device is partitioned into three functional domains, each containing +specific processing cores and peripherals: +1. Wake-up (WKUP) domain: + - Device Management and Security Controller (DMSC) +2. Microcontroller (MCU) domain: + - Dual Core ARM Cortex-R5F processor +3. MAIN domain: + - Dual core 64-bit ARM Cortex-A72 + - 2 x Dual cortex ARM Cortex-R5 subsystem + - 2 x C66x Digital signal processor sub system + - C71x Digital signal processor sub-system with MMA. + +More info can be found in TRM: http://www.ti.com/lit/pdf/spruil1 + +Boot Flow: +---------- +Boot flow is similar to that of AM65x SoC and extending it with remoteproc +support. Below is the pictorial representation of boot flow: + ++------------------------------------------------------------------------+-----------------------+ +| DMSC | MCU R5 | A72 | MAIN R5/C66x/C7x | ++------------------------------------------------------------------------+-----------------------+ +| +--------+ | | | | +| | Reset | | | | | +| +--------+ | | | | +| : | | | | +| +--------+ | +-----------+ | | | +| | *ROM* |----------|-->| Reset rls | | | | +| +--------+ | +-----------+ | | | +| | | | : | | | +| | ROM | | : | | | +| |services| | : | | | +| | | | +-------------+ | | | +| | | | | *R5 ROM* | | | | +| | | | +-------------+ | | | +| | |<---------|---|Load and auth| | | | +| | | | | tiboot3.bin | | | | +| | | | +-------------+ | | | +| | | | : | | | +| | | | : | | | +| | | | : | | | +| | | | +-------------+ | | | +| | | | | *R5 SPL* | | | | +| | | | +-------------+ | | | +| | | | | Load | | | | +| | | | | sysfw.itb | | | | +| | Start | | +-------------+ | | | +| | System |<---------|---| Start | | | | +| |Firmware| | | SYSFW | | | | +| +--------+ | +-------------+ | | | +| : | | | | | | +| +---------+ | | Load | | | | +| | *SYSFW* | | | system | | | | +| +---------+ | | Config data | | | | +| | |<--------|---| | | | | +| | | | +-------------+ | | | +| | | | | DDR | | | | +| | | | | config | | | | +| | | | +-------------+ | | | +| | | | | Load | | | | +| | | | | tispl.bin | | | | +| | | | +-------------+ | | | +| | | | | Load R5 | | | | +| | | | | firmware | | | | +| | | | +-------------+ | | | +| | |<--------|---| Start A72 | | | | +| | | | | and jump to | | | | +| | | | | next image | | | | +| | | | +-------------+ | | | +| | | | | +-----------+ | | +| | |---------|-----------------------|---->| Reset rls | | | +| | | | | +-----------+ | | +| | DMSC | | | : | | +| |Services | | | +-----------+ | | +| | |<--------|-----------------------|---->|*ATF/OPTEE*| | | +| | | | | +-----------+ | | +| | | | | : | | +| | | | | +-----------+ | | +| | |<--------|-----------------------|---->| *A72 SPL* | | | +| | | | | +-----------+ | | +| | | | | | Load | | | +| | | | | | u-boot.img| | | +| | | | | +-----------+ | | +| | | | | : | | +| | | | | +-----------+ | | +| | |<--------|-----------------------|---->| *U-Boot* | | | +| | | | | +-----------+ | | +| | | | | | prompt | | | +| | | | | +-----------+ | | +| | | | | | Load R5 | | | +| | | | | | Firmware | | | +| | | | | +-----------+ | | +| | |<--------|-----------------------|-----| Start R5 | | +-----------+ | +| | |---------|-----------------------|-----+-----------+-----|----->| R5 starts | | +| | | | | | Load C6 | | +-----------+ | +| | | | | | Firmware | | | +| | | | | +-----------+ | | +| | |<--------|-----------------------|-----| Start C6 | | +-----------+ | +| | |---------|-----------------------|-----+-----------+-----|----->| C6 starts | | +| | | | | | Load C7 | | +-----------+ | +| | | | | | Firmware | | | +| | | | | +-----------+ | | +| | |<--------|-----------------------|-----| Start C7 | | +-----------+ | +| | |---------|-----------------------|-----+-----------+-----|----->| C7 starts | | +| +---------+ | | | +-----------+ | +| | | | | ++------------------------------------------------------------------------+-----------------------+ + +- Here DMSC acts as master and provides all the critical services. R5/A72 +requests DMSC to get these services done as shown in the above diagram. + +Sources: +-------- +1. SYSFW: + Tree: git://git.ti.com/processor-firmware/system-firmware-image-gen.git + Branch: master + +2. ATF: + Tree: https://github.com/ARM-software/arm-trusted-firmware.git + Branch: master + +3. OPTEE: + Tree: https://github.com/OP-TEE/optee_os.git + Branch: master + +4. U-Boot: + Tree: https://gitlab.denx.de/u-boot/u-boot + Branch: master + +Build procedure: +---------------- +1. SYSFW: +$ make CROSS_COMPILE=arm-linux-gnueabihf- + +2. ATF: +$ make CROSS_COMPILE=aarch64-linux-gnu- ARCH=aarch64 PLAT=k3 TARGET_BOARD=generic SPD=opteed + +3. OPTEE: +$ make PLATFORM=k3-j721e CFG_ARM64_core=y + +4. U-Boot: + +4.1. R5: +$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- j721e_evm_r5_defconfig O=/tmp/r5 +$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- O=/tmp/r5 + +4.2. A72: +$ make ARCH=arm CROSS_COMPILE=aarch64-linux-gnu- j721e_evm_a72_defconfig O=/tmp/a72 +$ make ARCH=arm CROSS_COMPILE=aarch64-linux-gnu- ATF=<path to ATF dir>/build/k3/generic/release/bl31.bin TEE=<path to OPTEE OS dir>/out/arm-plat-k3/core/tee-pager.bin O=/tmp/a72 + +Target Images +-------------- +Copy the below images to an SD card and boot: +- sysfw.itb from step 1 +- tiboot3.bin from step 4.1 +- tispl.bin, u-boot.img from 4.2 + +Image formats: +-------------- + +- tiboot3.bin: + +-----------------------+ + | X.509 | + | Certificate | + | +-------------------+ | + | | | | + | | R5 | | + | | u-boot-spl.bin | | + | | | | + | +-------------------+ | + | | | | + | | FIT header | | + | | +---------------+ | | + | | | | | | + | | | DTB 1...N | | | + | | +---------------+ | | + | +-------------------+ | + +-----------------------+ + +- tispl.bin + +-----------------------+ + | | + | FIT HEADER | + | +-------------------+ | + | | | | + | | A72 ATF | | + | +-------------------+ | + | | | | + | | A72 OPTEE | | + | +-------------------+ | + | | | | + | | A72 SPL | | + | +-------------------+ | + | | | | + | | SPL DTB 1...N | | + | +-------------------+ | + +-----------------------+ + +- sysfw.itb + +-----------------------+ + | | + | FIT HEADER | + | +-------------------+ | + | | | | + | | sysfw.bin | | + | +-------------------+ | + | | | | + | | board config | | + | +-------------------+ | + | | | | + | | PM config | | + | +-------------------+ | + | | | | + | | RM config | | + | +-------------------+ | + | | | | + | | Secure config | | + | +-------------------+ | + +-----------------------+ |