summaryrefslogtreecommitdiff
path: root/board/ti/am335x/board.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/ti/am335x/board.c')
-rw-r--r--board/ti/am335x/board.c115
1 files changed, 32 insertions, 83 deletions
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index f56d17ec58..4330be6499 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -31,6 +31,7 @@
#include <environment.h>
#include <watchdog.h>
#include <environment.h>
+#include "../common/board_detect.h"
#include "board.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -46,43 +47,9 @@ static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
/*
* Read header information from EEPROM into global structure.
*/
-static int read_eeprom(struct am335x_baseboard_id *header)
+static inline int __maybe_unused read_eeprom(void)
{
- /* Check if baseboard eeprom is available */
- if (i2c_probe(CONFIG_SYS_I2C_EEPROM_ADDR)) {
- puts("Could not probe the EEPROM; something fundamentally "
- "wrong on the I2C bus.\n");
- return -ENODEV;
- }
-
- /* read the eeprom using i2c */
- if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 2, (uchar *)header,
- sizeof(struct am335x_baseboard_id))) {
- puts("Could not read the EEPROM; something fundamentally"
- " wrong on the I2C bus.\n");
- return -EIO;
- }
-
- if (header->magic != 0xEE3355AA) {
- /*
- * read the eeprom using i2c again,
- * but use only a 1 byte address
- */
- if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 1, (uchar *)header,
- sizeof(struct am335x_baseboard_id))) {
- puts("Could not read the EEPROM; something "
- "fundamentally wrong on the I2C bus.\n");
- return -EIO;
- }
-
- if (header->magic != 0xEE3355AA) {
- printf("Incorrect magic number (0x%x) in EEPROM\n",
- header->magic);
- return -EINVAL;
- }
- }
-
- return 0;
+ return ti_i2c_eeprom_am_get(-1, CONFIG_SYS_I2C_EEPROM_ADDR);
}
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
@@ -223,16 +190,15 @@ const struct dpll_params dpll_ddr_bone_black = {
void am33xx_spl_board_init(void)
{
- struct am335x_baseboard_id header;
int mpu_vdd;
- if (read_eeprom(&header) < 0)
+ if (read_eeprom() < 0)
puts("Could not get board ID.\n");
/* Get the frequency */
dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev);
- if (board_is_bone(&header) || board_is_bone_lt(&header)) {
+ if (board_is_bone() || board_is_bone_lt()) {
/* BeagleBone PMIC Code */
int usb_cur_lim;
@@ -240,8 +206,7 @@ void am33xx_spl_board_init(void)
* Only perform PMIC configurations if board rev > A1
* on Beaglebone White
*/
- if (board_is_bone(&header) && !strncmp(header.version,
- "00A1", 4))
+ if (board_is_bone() && !strncmp(board_ti_get_rev(), "00A1", 4))
return;
if (i2c_probe(TPS65217_CHIP_PM))
@@ -251,7 +216,7 @@ void am33xx_spl_board_init(void)
* On Beaglebone White we need to ensure we have AC power
* before increasing the frequency.
*/
- if (board_is_bone(&header)) {
+ if (board_is_bone()) {
uchar pmic_status_reg;
if (tps65217_reg_read(TPS65217_STATUS,
&pmic_status_reg))
@@ -266,7 +231,7 @@ void am33xx_spl_board_init(void)
* Override what we have detected since we know if we have
* a Beaglebone Black it supports 1GHz.
*/
- if (board_is_bone_lt(&header))
+ if (board_is_bone_lt())
dpll_mpu_opp100.m = MPUPLL_M_1000;
/*
@@ -307,7 +272,7 @@ void am33xx_spl_board_init(void)
* Set LDO3, LDO4 output voltage to 3.3V for Beaglebone.
* Set LDO3 to 1.8V and LDO4 to 3.3V for Beaglebone Black.
*/
- if (board_is_bone(&header)) {
+ if (board_is_bone()) {
if (tps65217_reg_write(TPS65217_PROT_LEVEL_2,
TPS65217_DEFLS1,
TPS65217_LDO_VOLTAGE_OUT_3_3,
@@ -367,18 +332,16 @@ void am33xx_spl_board_init(void)
const struct dpll_params *get_dpll_ddr_params(void)
{
- struct am335x_baseboard_id header;
-
enable_i2c0_pin_mux();
i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
- if (read_eeprom(&header) < 0)
+ if (read_eeprom() < 0)
puts("Could not get board ID.\n");
- if (board_is_evm_sk(&header))
+ if (board_is_evm_sk())
return &dpll_ddr_evm_sk;
- else if (board_is_bone_lt(&header))
+ else if (board_is_bone_lt())
return &dpll_ddr_bone_black;
- else if (board_is_evm_15_or_later(&header))
+ else if (board_is_evm_15_or_later())
return &dpll_ddr_evm_sk;
else
return &dpll_ddr;
@@ -403,12 +366,10 @@ void set_uart_mux_conf(void)
void set_mux_conf_regs(void)
{
- __maybe_unused struct am335x_baseboard_id header;
-
- if (read_eeprom(&header) < 0)
+ if (read_eeprom() < 0)
puts("Could not get board ID.\n");
- enable_board_pin_mux(&header);
+ enable_board_pin_mux();
}
const struct ctrl_ioregs ioregs_evmsk = {
@@ -445,12 +406,10 @@ const struct ctrl_ioregs ioregs = {
void sdram_init(void)
{
- __maybe_unused struct am335x_baseboard_id header;
-
- if (read_eeprom(&header) < 0)
+ if (read_eeprom() < 0)
puts("Could not get board ID.\n");
- if (board_is_evm_sk(&header)) {
+ if (board_is_evm_sk()) {
/*
* EVM SK 1.2A and later use gpio0_7 to enable DDR3.
* This is safe enough to do on older revs.
@@ -459,15 +418,15 @@ void sdram_init(void)
gpio_direction_output(GPIO_DDR_VTT_EN, 1);
}
- if (board_is_evm_sk(&header))
+ if (board_is_evm_sk())
config_ddr(303, &ioregs_evmsk, &ddr3_data,
&ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0);
- else if (board_is_bone_lt(&header))
+ else if (board_is_bone_lt())
config_ddr(400, &ioregs_bonelt,
&ddr3_beagleblack_data,
&ddr3_beagleblack_cmd_ctrl_data,
&ddr3_beagleblack_emif_reg_data, 0);
- else if (board_is_evm_15_or_later(&header))
+ else if (board_is_evm_15_or_later())
config_ddr(303, &ioregs_evm15, &ddr3_evm_data,
&ddr3_evm_cmd_ctrl_data, &ddr3_evm_emif_reg_data, 0);
else
@@ -496,26 +455,16 @@ int board_init(void)
int board_late_init(void)
{
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
- char safe_string[HDR_NAME_LEN + 1];
- struct am335x_baseboard_id header;
+ int rc;
+ char *name = NULL;
- if (read_eeprom(&header) < 0)
+ rc = read_eeprom();
+ if (rc)
puts("Could not get board ID.\n");
- /* Now set variables based on the header. */
- strncpy(safe_string, (char *)header.name, sizeof(header.name));
- safe_string[sizeof(header.name)] = 0;
- setenv("board_name", safe_string);
-
- /* BeagleBone Green eeprom, board_rev: 0x1a 0x00 0x00 0x00 */
- if ( (header.version[0] == 0x1a) && (header.version[1] == 0x00) &&
- (header.version[2] == 0x00) && (header.version[3] == 0x00) ) {
- setenv("board_rev", "BBG1");
- } else {
- strncpy(safe_string, (char *)header.version, sizeof(header.version));
- safe_string[sizeof(header.version)] = 0;
- setenv("board_rev", safe_string);
- }
+ if (board_is_bbg1())
+ name = "BBG1";
+ set_board_info_env(name);
#endif
return 0;
@@ -587,7 +536,7 @@ int board_eth_init(bd_t *bis)
int rv, n = 0;
uint8_t mac_addr[6];
uint32_t mac_hi, mac_lo;
- __maybe_unused struct am335x_baseboard_id header;
+ __maybe_unused struct ti_am_eeprom *header;
/* try reading mac address from efuse */
mac_lo = readl(&cdev->macid0l);
@@ -624,11 +573,11 @@ int board_eth_init(bd_t *bis)
eth_setenv_enetaddr("eth1addr", mac_addr);
}
- if (read_eeprom(&header) < 0)
+ if (read_eeprom() < 0)
puts("Could not get board ID.\n");
- if (board_is_bone(&header) || board_is_bone_lt(&header) ||
- board_is_idk(&header)) {
+ if (board_is_bone() || board_is_bone_lt() ||
+ board_is_idk()) {
writel(MII_MODE_ENABLE, &cdev->miisel);
cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if =
PHY_INTERFACE_MODE_MII;
@@ -657,7 +606,7 @@ int board_eth_init(bd_t *bis)
#define AR8051_DEBUG_RGMII_CLK_DLY_REG 0x5
#define AR8051_RGMII_TX_CLK_DLY 0x100
- if (board_is_evm_sk(&header) || board_is_gp_evm(&header)) {
+ if (board_is_evm_sk() || board_is_gp_evm()) {
const char *devname;
devname = miiphy_get_current_dev();
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-29 18:15:23 +0000