diff options
Diffstat (limited to 'board/r360mpi')
-rw-r--r-- | board/r360mpi/flash.c | 32 | ||||
-rw-r--r-- | board/r360mpi/pcmcia.c | 16 | ||||
-rw-r--r-- | board/r360mpi/r360mpi.c | 40 |
3 files changed, 44 insertions, 44 deletions
diff --git a/board/r360mpi/flash.c b/board/r360mpi/flash.c index 8145437b1a..45cccf712b 100644 --- a/board/r360mpi/flash.c +++ b/board/r360mpi/flash.c @@ -29,11 +29,11 @@ #include <common.h> #include <mpc8xx.h> -flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ +flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ #if defined(CONFIG_ENV_IS_IN_FLASH) # ifndef CONFIG_ENV_ADDR -# define CONFIG_ENV_ADDR (CFG_FLASH_BASE + CONFIG_ENV_OFFSET) +# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) # endif # ifndef CONFIG_ENV_SIZE # define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE @@ -76,13 +76,13 @@ static void flash_get_offsets (ulong base, flash_info_t * info); unsigned long flash_init (void) { - volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; unsigned long size_b0; int i; /* Init: no FLASHes known */ - for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) { + for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) { flash_info[i].flash_id = FLASH_UNKNOWN; } @@ -95,19 +95,19 @@ unsigned long flash_init (void) } /* Remap FLASH according to real size */ - memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000); - memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_PS_16 | BR_MS_GPCM | BR_V; + memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000); + memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_PS_16 | BR_MS_GPCM | BR_V; /* Re-do sizing to get full correct info */ - size_b0 = flash_get_size ((FPW *) CFG_FLASH_BASE, &flash_info[0]); + size_b0 = flash_get_size ((FPW *) CONFIG_SYS_FLASH_BASE, &flash_info[0]); - flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]); + flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]); -#if CFG_MONITOR_BASE >= CFG_FLASH_BASE +#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE /* monitor protection ON by default */ (void) flash_protect (FLAG_PROTECT_SET, - CFG_FLASH_BASE, - CFG_FLASH_BASE + monitor_flash_len - 1, + CONFIG_SYS_FLASH_BASE, + CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, &flash_info[0]); #endif @@ -261,10 +261,10 @@ static ulong flash_get_size (FPW * addr, flash_info_t * info) break; } - if (info->sector_count > CFG_MAX_FLASH_SECT) { + if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) { printf ("** ERROR: sector count %d > max (%d) **\n", - info->sector_count, CFG_MAX_FLASH_SECT); - info->sector_count = CFG_MAX_FLASH_SECT; + info->sector_count, CONFIG_SYS_MAX_FLASH_SECT); + info->sector_count = CONFIG_SYS_MAX_FLASH_SECT; } addr[0] = (FPW) 0x00FF00FF; /* restore read mode */ @@ -335,7 +335,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) udelay (1000); while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) { + if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { printf ("Timeout\n"); *addr = (FPW) 0x00B000B0; /* suspend erase */ *addr = (FPW) 0x00FF00FF; /* reset to read mode */ @@ -472,7 +472,7 @@ static int write_data (flash_info_t * info, ulong dest, FPW data) start = get_timer (0); while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer (start) > CFG_FLASH_WRITE_TOUT) { + if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) { *addr = (FPW) 0x00FF00FF; /* restore read mode */ return (1); } diff --git a/board/r360mpi/pcmcia.c b/board/r360mpi/pcmcia.c index 4fd9d1298b..85da41bd22 100644 --- a/board/r360mpi/pcmcia.c +++ b/board/r360mpi/pcmcia.c @@ -28,10 +28,10 @@ int pcmcia_hardware_enable(int slot) udelay(10000); - immap = (immap_t *)CFG_IMMR; - sysp = (sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf)); - pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia)); - cp = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm)); + immap = (immap_t *)CONFIG_SYS_IMMR; + sysp = (sysconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_siu_conf)); + pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia)); + cp = (cpm8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_cpm)); /* * Configure SIUMCR to enable PCMCIA port B @@ -132,8 +132,8 @@ int pcmcia_hardware_disable(int slot) debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot); - immap = (immap_t *)CFG_IMMR; - pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia)); + immap = (immap_t *)CONFIG_SYS_IMMR; + pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia)); /* remove all power */ immap->im_ioport.iop_pcdat |= 0x0400; @@ -164,8 +164,8 @@ int pcmcia_voltage_set(int slot, int vcc, int vpp) " Slot %c, Vcc=%d.%d, Vpp=%d.%d\n", 'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10); - immap = (immap_t *)CFG_IMMR; - pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia)); + immap = (immap_t *)CONFIG_SYS_IMMR; + pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia)); /* * Disable PCMCIA buffers (isolate the interface) * and assert RESET signal diff --git a/board/r360mpi/r360mpi.c b/board/r360mpi/r360mpi.c index c51e412f46..b502e4d78c 100644 --- a/board/r360mpi/r360mpi.c +++ b/board/r360mpi/r360mpi.c @@ -105,7 +105,7 @@ static long int dram_size (long int, long int *, long int); phys_size_t initdram (int board_type) { - volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; long int size8, size9; long int size_b0 = 0; @@ -120,7 +120,7 @@ phys_size_t initdram (int board_type) * with two SDRAM banks or four cycles every 31.2 us with one * bank. It will be adjusted after memory sizing. */ - memctl->memc_mptpr = CFG_MPTPR_2BK_8K; + memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_8K; memctl->memc_mar = 0x00000088; @@ -129,10 +129,10 @@ phys_size_t initdram (int board_type) * preliminary address - these have to be modified after the * SDRAM size has been determined. */ - memctl->memc_or2 = CFG_OR2_PRELIM; - memctl->memc_br2 = CFG_BR2_PRELIM; + memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM; + memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM; - memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */ + memctl->memc_mamr = CONFIG_SYS_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */ udelay (200); @@ -152,7 +152,7 @@ phys_size_t initdram (int board_type) * * try 8 column mode */ - size8 = dram_size (CFG_MAMR_8COL, (long *) SDRAM_BASE2_PRELIM, + size8 = dram_size (CONFIG_SYS_MAMR_8COL, (long *) SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE); udelay (1000); @@ -160,7 +160,7 @@ phys_size_t initdram (int board_type) /* * try 9 column mode */ - size9 = dram_size (CFG_MAMR_9COL, (long *) SDRAM_BASE2_PRELIM, + size9 = dram_size (CONFIG_SYS_MAMR_9COL, (long *) SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE); if (size8 < size9) { /* leave configuration at 9 columns */ @@ -168,7 +168,7 @@ phys_size_t initdram (int board_type) /* debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20); */ } else { /* back to 8 columns */ size_b0 = size8; - memctl->memc_mamr = CFG_MAMR_8COL; + memctl->memc_mamr = CONFIG_SYS_MAMR_8COL; udelay (500); /* debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20); */ } @@ -181,7 +181,7 @@ phys_size_t initdram (int board_type) */ if ((size_b0 < 0x02000000)) { /* reduce to 15.6 us (62.4 us / quad) */ - memctl->memc_mptpr = CFG_MPTPR_2BK_4K; + memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K; udelay (1000); } @@ -189,20 +189,20 @@ phys_size_t initdram (int board_type) * Final mapping */ - memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM; - memctl->memc_br1 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V; + memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM; + memctl->memc_br1 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V; /* adjust refresh rate depending on SDRAM type, one bank */ reg = memctl->memc_mptpr; - reg >>= 1; /* reduce to CFG_MPTPR_1BK_8K / _4K */ + reg >>= 1; /* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */ memctl->memc_mptpr = reg; udelay (10000); #ifdef CONFIG_CAN_DRIVER /* Initialize OR3 / BR3 */ - memctl->memc_or3 = CFG_OR3_CAN; /* switch GPLB_5 to GPLA_5 */ - memctl->memc_br3 = CFG_BR3_CAN; + memctl->memc_or3 = CONFIG_SYS_OR3_CAN; /* switch GPLB_5 to GPLA_5 */ + memctl->memc_br3 = CONFIG_SYS_BR3_CAN; /* Initialize MBMR */ memctl->memc_mbmr = MBMR_GPL_B4DIS; /* GPL_B4 works as UPWAITB */ @@ -256,7 +256,7 @@ phys_size_t initdram (int board_type) static long int dram_size (long int mamr_value, long int *base, long int maxsize) { - volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; memctl->memc_mamr = mamr_value; @@ -268,7 +268,7 @@ static long int dram_size (long int mamr_value, void r360_i2c_lcd_write (uchar data0, uchar data1) { - if (i2c_write (CFG_I2C_LCD_ADDR, data0, 1, &data1, 1)) { + if (i2c_write (CONFIG_SYS_I2C_LCD_ADDR, data0, 1, &data1, 1)) { printf("Can't write lcd data 0x%02X 0x%02X.\n", data0, data1); } } @@ -292,9 +292,9 @@ int misc_init_r (void) char *str; int i; - i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE); + i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); - i2c_read (CFG_I2C_KEY_ADDR, 0, 0, (uchar *)kbd_data, KEYBD_DATALEN); + i2c_read (CONFIG_SYS_I2C_KEY_ADDR, 0, 0, (uchar *)kbd_data, KEYBD_DATALEN); for (i = 0; i < KEYBD_DATALEN; ++i) { sprintf (keybd_env + i + i, "%02X", kbd_data[i]); @@ -397,10 +397,10 @@ int do_kbd (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) uchar keybd_env[2 * KEYBD_DATALEN + 1]; int i; - i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE); + i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); /* Read keys */ - i2c_read (CFG_I2C_KEY_ADDR, 0, 0, kbd_data, KEYBD_DATALEN); + i2c_read (CONFIG_SYS_I2C_KEY_ADDR, 0, 0, kbd_data, KEYBD_DATALEN); puts ("Keys:"); for (i = 0; i < KEYBD_DATALEN; ++i) { |