diff options
Diffstat (limited to 'arch/x86/lib')
| -rw-r--r-- | arch/x86/lib/Makefile | 12 | ||||
| -rw-r--r-- | arch/x86/lib/board.c | 15 | ||||
| -rw-r--r-- | arch/x86/lib/init_helpers.c | 83 | ||||
| -rw-r--r-- | arch/x86/lib/init_wrappers.c | 28 | ||||
| -rw-r--r-- | arch/x86/lib/pcat_timer.c | 2 | ||||
| -rw-r--r-- | arch/x86/lib/physmem.c | 228 | ||||
| -rw-r--r-- | arch/x86/lib/relocate.c | 4 | ||||
| -rw-r--r-- | arch/x86/lib/timer.c | 17 | ||||
| -rw-r--r-- | arch/x86/lib/video.c | 2 | ||||
| -rw-r--r-- | arch/x86/lib/zimage.c | 27 |
10 files changed, 362 insertions, 56 deletions
diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile index 51836dacca..0a52cc896c 100644 --- a/arch/x86/lib/Makefile +++ b/arch/x86/lib/Makefile @@ -25,11 +25,16 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(ARCH).o +ifeq ($(CONFIG_X86_NO_REAL_MODE),) SOBJS-$(CONFIG_SYS_PC_BIOS) += bios.o SOBJS-$(CONFIG_SYS_PCI_BIOS) += bios_pci.o -SOBJS-$(CONFIG_SYS_X86_REALMODE) += realmode_switch.o +COBJS-y += realmode.o +SOBJS-y += realmode_switch.o COBJS-$(CONFIG_SYS_PC_BIOS) += bios_setup.o +COBJS-$(CONFIG_VIDEO_VGA) += video_bios.o +endif + COBJS-y += board.o COBJS-y += bootm.o COBJS-y += cmd_boot.o @@ -41,12 +46,11 @@ COBJS-$(CONFIG_SYS_PCAT_INTERRUPTS) += pcat_interrupts.o COBJS-$(CONFIG_SYS_GENERIC_TIMER) += pcat_timer.o COBJS-$(CONFIG_PCI) += pci.o COBJS-$(CONFIG_PCI) += pci_type1.o -COBJS-$(CONFIG_SYS_X86_REALMODE) += realmode.o COBJS-y += relocate.o +COBJS-y += physmem.o COBJS-y += string.o COBJS-$(CONFIG_SYS_X86_ISR_TIMER) += timer.o -COBJS-$(CONFIG_VIDEO) += video_bios.o -COBJS-$(CONFIG_VIDEO) += video.o +COBJS-$(CONFIG_VIDEO_VGA) += video.o COBJS-$(CONFIG_CMD_ZBOOT) += zimage.o SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) diff --git a/arch/x86/lib/board.c b/arch/x86/lib/board.c index e5caf13561..22bc26dde9 100644 --- a/arch/x86/lib/board.c +++ b/arch/x86/lib/board.c @@ -36,6 +36,7 @@ #include <stdio_dev.h> #include <asm/u-boot-x86.h> #include <asm/relocate.h> +#include <asm/processor.h> #include <asm/init_helpers.h> #include <asm/init_wrappers.h> @@ -98,10 +99,17 @@ typedef int (init_fnc_t) (void); init_fnc_t *init_sequence_f[] = { cpu_init_f, board_early_init_f, +#ifdef CONFIG_OF_CONTROL + find_fdt, + fdtdec_check_fdt, +#endif env_init, init_baudrate_f, serial_init, console_init_f, +#ifdef CONFIG_OF_CONTROL + prepare_fdt, +#endif dram_init_f, calculate_relocation_address, @@ -121,7 +129,6 @@ init_fnc_t *init_sequence_f[] = { * initialise the CPU caches (to speed up the relocation process) */ init_fnc_t *init_sequence_f_r[] = { - copy_gd_to_ram_f_r, init_cache_f_r, copy_uboot_to_ram, clear_bss, @@ -154,6 +161,9 @@ init_fnc_t *init_sequence_r[] = { #ifndef CONFIG_SYS_NO_FLASH flash_init_r, #endif +#ifdef CONFIG_SPI + init_func_spi; +#endif env_relocate_r, #ifdef CONFIG_PCI pci_init_r, @@ -164,9 +174,6 @@ init_fnc_t *init_sequence_r[] = { #ifdef CONFIG_MISC_INIT_R misc_init_r, #endif -#if defined(CONFIG_CMD_PCMCIA) && !defined(CONFIG_CMD_IDE) - pci_init_r, -#endif #if defined(CONFIG_CMD_KGDB) kgdb_init_r, #endif diff --git a/arch/x86/lib/init_helpers.c b/arch/x86/lib/init_helpers.c index 9ec34ff992..3eec9a61d6 100644 --- a/arch/x86/lib/init_helpers.c +++ b/arch/x86/lib/init_helpers.c @@ -28,9 +28,11 @@ #include <net.h> #include <ide.h> #include <serial.h> +#include <spi.h> #include <status_led.h> #include <asm/processor.h> #include <asm/u-boot-x86.h> +#include <linux/compiler.h> #include <asm/init_helpers.h> @@ -71,7 +73,7 @@ int init_baudrate_f(void) return 0; } -int calculate_relocation_address(void) +__weak int calculate_relocation_address(void) { ulong text_start = (ulong)&__text_start; ulong bss_end = (ulong)&__bss_end; @@ -83,51 +85,17 @@ int calculate_relocation_address(void) * requirements */ - /* Global Data is at top of available memory */ + /* Stack is at top of available memory */ dest_addr = gd->ram_size; - dest_addr -= GENERATED_GBL_DATA_SIZE; - dest_addr &= ~15; - gd->new_gd_addr = dest_addr; - - /* GDT is below Global Data */ - dest_addr -= X86_GDT_SIZE; - dest_addr &= ~15; - gd->gdt_addr = dest_addr; - - /* Stack is below GDT */ - gd->start_addr_sp = dest_addr; - /* U-Boot is below the stack */ - dest_addr -= CONFIG_SYS_STACK_SIZE; + /* U-Boot is at the top */ dest_addr -= (bss_end - text_start); dest_addr &= ~15; gd->relocaddr = dest_addr; gd->reloc_off = (dest_addr - text_start); - return 0; -} - -int copy_gd_to_ram_f_r(void) -{ - gd_t *ram_gd; - - /* - * Global data is still in temporary memory (the CPU cache). - * calculate_relocation_address() has set gd->new_gd_addr to - * where the global data lives in RAM but getting it there - * safely is a bit tricky due to the 'F-Segment Hack' that - * we need to use for x86 - */ - ram_gd = (gd_t *)gd->new_gd_addr; - memcpy((void *)ram_gd, gd, sizeof(gd_t)); - - /* - * Reload the Global Descriptor Table so FS points to the - * in-RAM copy of Global Data (calculate_relocation_address() - * has already calculated the in-RAM location of the GDT) - */ - ram_gd->gd_addr = (ulong)ram_gd; - init_gd(ram_gd, (u64 *)gd->gdt_addr); + /* Stack is at the bottom, so it can grow down */ + gd->start_addr_sp = dest_addr - CONFIG_SYS_MALLOC_LEN; return 0; } @@ -195,3 +163,40 @@ int set_load_addr_r(void) return 0; } + +int init_func_spi(void) +{ + puts("SPI: "); + spi_init(); + puts("ready\n"); + return 0; +} + +#ifdef CONFIG_OF_CONTROL +int find_fdt(void) +{ +#ifdef CONFIG_OF_EMBED + /* Get a pointer to the FDT */ + gd->fdt_blob = _binary_dt_dtb_start; +#elif defined CONFIG_OF_SEPARATE + /* FDT is at end of image */ + gd->fdt_blob = (void *)(_end_ofs + _TEXT_BASE); +#endif + /* Allow the early environment to override the fdt address */ + gd->fdt_blob = (void *)getenv_ulong("fdtcontroladdr", 16, + (uintptr_t)gd->fdt_blob); + + return 0; +} + +int prepare_fdt(void) +{ + /* For now, put this check after the console is ready */ + if (fdtdec_prepare_fdt()) { + panic("** CONFIG_OF_CONTROL defined but no FDT - please see " + "doc/README.fdt-control"); + } + + return 0; +} +#endif diff --git a/arch/x86/lib/init_wrappers.c b/arch/x86/lib/init_wrappers.c index 71449fe6fa..cca018fa9b 100644 --- a/arch/x86/lib/init_wrappers.c +++ b/arch/x86/lib/init_wrappers.c @@ -21,6 +21,7 @@ * MA 02111-1307 USA */ #include <common.h> +#include <environment.h> #include <serial.h> #include <kgdb.h> #include <scsi.h> @@ -36,10 +37,35 @@ int serial_initialize_r(void) return 0; } +/* + * Tell if it's OK to load the environment early in boot. + * + * If CONFIG_OF_CONFIG is defined, we'll check with the FDT to see + * if this is OK (defaulting to saying it's not OK). + * + * NOTE: Loading the environment early can be a bad idea if security is + * important, since no verification is done on the environment. + * + * @return 0 if environment should not be loaded, !=0 if it is ok to load + */ +static int should_load_env(void) +{ +#ifdef CONFIG_OF_CONTROL + return fdtdec_get_config_int(gd->fdt_blob, "load-environment", 0); +#elif defined CONFIG_DELAY_ENVIRONMENT + return 0; +#else + return 1; +#endif +} + int env_relocate_r(void) { /* initialize environment */ - env_relocate(); + if (should_load_env()) + env_relocate(); + else + set_default_env(NULL); return 0; } diff --git a/arch/x86/lib/pcat_timer.c b/arch/x86/lib/pcat_timer.c index 6b3db69447..b0b6637f3a 100644 --- a/arch/x86/lib/pcat_timer.c +++ b/arch/x86/lib/pcat_timer.c @@ -39,7 +39,7 @@ int timer_init(void) * Timer 0 is used to increment system_tick 1000 times/sec * Timer 1 was used for DRAM refresh in early PC's * Timer 2 is used to drive the speaker - * (to stasrt a beep: write 3 to port 0x61, + * (to start a beep: write 3 to port 0x61, * to stop it again: write 0) */ outb(PIT_CMD_CTR0 | PIT_CMD_BOTH | PIT_CMD_MODE2, diff --git a/arch/x86/lib/physmem.c b/arch/x86/lib/physmem.c new file mode 100644 index 0000000000..18f0e62acd --- /dev/null +++ b/arch/x86/lib/physmem.c @@ -0,0 +1,228 @@ +/* + * Copyright (c) 2012 The Chromium OS Authors. All rights reserved. + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + */ + +#include <common.h> +#include <physmem.h> +#include <linux/compiler.h> + +/* Large pages are 2MB. */ +#define LARGE_PAGE_SIZE ((1 << 20) * 2) + +/* + * Paging data structures. + */ + +struct pdpe { + uint64_t p:1; + uint64_t mbz_0:2; + uint64_t pwt:1; + uint64_t pcd:1; + uint64_t mbz_1:4; + uint64_t avl:3; + uint64_t base:40; + uint64_t mbz_2:12; +}; + +typedef struct pdpe pdpt_t[512]; + +struct pde { + uint64_t p:1; /* present */ + uint64_t rw:1; /* read/write */ + uint64_t us:1; /* user/supervisor */ + uint64_t pwt:1; /* page-level writethrough */ + uint64_t pcd:1; /* page-level cache disable */ + uint64_t a:1; /* accessed */ + uint64_t d:1; /* dirty */ + uint64_t ps:1; /* page size */ + uint64_t g:1; /* global page */ + uint64_t avl:3; /* available to software */ + uint64_t pat:1; /* page-attribute table */ + uint64_t mbz_0:8; /* must be zero */ + uint64_t base:31; /* base address */ +}; + +typedef struct pde pdt_t[512]; + +static pdpt_t pdpt __aligned(4096); +static pdt_t pdts[4] __aligned(4096); + +/* + * Map a virtual address to a physical address and optionally invalidate any + * old mapping. + * + * @param virt The virtual address to use. + * @param phys The physical address to use. + * @param invlpg Whether to use invlpg to clear any old mappings. + */ +static void x86_phys_map_page(uintptr_t virt, phys_addr_t phys, int invlpg) +{ + /* Extract the two bit PDPT index and the 9 bit PDT index. */ + uintptr_t pdpt_idx = (virt >> 30) & 0x3; + uintptr_t pdt_idx = (virt >> 21) & 0x1ff; + + /* Set up a handy pointer to the appropriate PDE. */ + struct pde *pde = &(pdts[pdpt_idx][pdt_idx]); + + memset(pde, 0, sizeof(struct pde)); + pde->p = 1; + pde->rw = 1; + pde->us = 1; + pde->ps = 1; + pde->base = phys >> 21; + + if (invlpg) { + /* Flush any stale mapping out of the TLBs. */ + __asm__ __volatile__( + "invlpg %0\n\t" + : + : "m" (*(uint8_t *)virt) + ); + } +} + +/* Identity map the lower 4GB and turn on paging with PAE. */ +static void x86_phys_enter_paging(void) +{ + phys_addr_t page_addr; + unsigned i; + + /* Zero out the page tables. */ + memset(pdpt, 0, sizeof(pdpt)); + memset(pdts, 0, sizeof(pdts)); + + /* Set up the PDPT. */ + for (i = 0; i < ARRAY_SIZE(pdts); i++) { + pdpt[i].p = 1; + pdpt[i].base = ((uintptr_t)&pdts[i]) >> 12; + } + + /* Identity map everything up to 4GB. */ + for (page_addr = 0; page_addr < (1ULL << 32); + page_addr += LARGE_PAGE_SIZE) { + /* There's no reason to invalidate the TLB with paging off. */ + x86_phys_map_page(page_addr, page_addr, 0); + } + + /* Turn on paging */ + __asm__ __volatile__( + /* Load the page table address */ + "movl %0, %%cr3\n\t" + /* Enable pae */ + "movl %%cr4, %%eax\n\t" + "orl $0x00000020, %%eax\n\t" + "movl %%eax, %%cr4\n\t" + /* Enable paging */ + "movl %%cr0, %%eax\n\t" + "orl $0x80000000, %%eax\n\t" + "movl %%eax, %%cr0\n\t" + : + : "r" (pdpt) + : "eax" + ); +} + +/* Disable paging and PAE mode. */ +static void x86_phys_exit_paging(void) +{ + /* Turn off paging */ + __asm__ __volatile__ ( + /* Disable paging */ + "movl %%cr0, %%eax\n\t" + "andl $0x7fffffff, %%eax\n\t" + "movl %%eax, %%cr0\n\t" + /* Disable pae */ + "movl %%cr4, %%eax\n\t" + "andl $0xffffffdf, %%eax\n\t" + "movl %%eax, %%cr4\n\t" + : + : + : "eax" + ); +} + +/* + * Set physical memory to a particular value when the whole region fits on one + * page. + * + * @param map_addr The address that starts the physical page. + * @param offset How far into that page to start setting a value. + * @param c The value to set memory to. + * @param size The size in bytes of the area to set. + */ +static void x86_phys_memset_page(phys_addr_t map_addr, uintptr_t offset, int c, + unsigned size) +{ + /* + * U-Boot should be far away from the beginning of memory, so that's a + * good place to map our window on top of. + */ + const uintptr_t window = LARGE_PAGE_SIZE; + + /* Make sure the window is below U-Boot. */ + assert(window + LARGE_PAGE_SIZE < + gd->relocaddr - CONFIG_SYS_MALLOC_LEN - CONFIG_SYS_STACK_SIZE); + /* Map the page into the window and then memset the appropriate part. */ + x86_phys_map_page(window, map_addr, 1); + memset((void *)(window + offset), c, size); +} + +/* + * A physical memory anologue to memset with matching parameters and return + * value. + */ +phys_addr_t arch_phys_memset(phys_addr_t start, int c, phys_size_t size) +{ + const phys_addr_t max_addr = (phys_addr_t)~(uintptr_t)0; + const phys_addr_t orig_start = start; + + if (!size) + return orig_start; + + /* Handle memory below 4GB. */ + if (start <= max_addr) { + phys_size_t low_size = MIN(max_addr + 1 - start, size); + void *start_ptr = (void *)(uintptr_t)start; + + assert(((phys_addr_t)(uintptr_t)start) == start); + memset(start_ptr, c, low_size); + start += low_size; + size -= low_size; + } + + /* Use paging and PAE to handle memory above 4GB up to 64GB. */ + if (size) { + phys_addr_t map_addr = start & ~(LARGE_PAGE_SIZE - 1); + phys_addr_t offset = start - map_addr; + + x86_phys_enter_paging(); + + /* Handle the first partial page. */ + if (offset) { + phys_addr_t end = + MIN(map_addr + LARGE_PAGE_SIZE, start + size); + phys_size_t cur_size = end - start; + x86_phys_memset_page(map_addr, offset, c, cur_size); + size -= cur_size; + map_addr += LARGE_PAGE_SIZE; + } + /* Handle the complete pages. */ + while (size > LARGE_PAGE_SIZE) { + x86_phys_memset_page(map_addr, 0, c, LARGE_PAGE_SIZE); + size -= LARGE_PAGE_SIZE; + map_addr += LARGE_PAGE_SIZE; + } + /* Handle the last partial page. */ + if (size) + x86_phys_memset_page(map_addr, 0, c, size); + + x86_phys_exit_paging(); + } + return orig_start; +} diff --git a/arch/x86/lib/relocate.c b/arch/x86/lib/relocate.c index 200baaba6a..23edca9526 100644 --- a/arch/x86/lib/relocate.c +++ b/arch/x86/lib/relocate.c @@ -80,12 +80,12 @@ int do_elf_reloc_fixups(void) /* Check that the target points into .text */ if (*offset_ptr_ram >= CONFIG_SYS_TEXT_BASE && - *offset_ptr_ram < + *offset_ptr_ram <= (CONFIG_SYS_TEXT_BASE + size)) { *offset_ptr_ram += gd->reloc_off; } } - } while (re_src++ < re_end); + } while (++re_src < re_end); return 0; } diff --git a/arch/x86/lib/timer.c b/arch/x86/lib/timer.c index fd7032e92c..a13424b3e3 100644 --- a/arch/x86/lib/timer.c +++ b/arch/x86/lib/timer.c @@ -37,6 +37,7 @@ struct timer_isr_function { static struct timer_isr_function *first_timer_isr; static unsigned long system_ticks; +static uint64_t base_value; /* * register_timer_isr() allows multiple architecture and board specific @@ -98,3 +99,19 @@ ulong get_timer(ulong base) { return system_ticks - base; } + +void timer_set_tsc_base(uint64_t new_base) +{ + base_value = new_base; +} + +uint64_t timer_get_tsc(void) +{ + uint64_t time_now; + + time_now = rdtsc(); + if (!base_value) + base_value = time_now; + + return time_now - base_value; +} diff --git a/arch/x86/lib/video.c b/arch/x86/lib/video.c index 3d6b24d620..20e2416ae1 100644 --- a/arch/x86/lib/video.c +++ b/arch/x86/lib/video.c @@ -222,8 +222,10 @@ int video_init(void) int drv_video_init(void) { +#ifndef CONFIG_X86_NO_REAL_MODE if (video_bios_init()) return 1; +#endif return video_init(); } diff --git a/arch/x86/lib/zimage.c b/arch/x86/lib/zimage.c index 22142864c2..46af391f29 100644 --- a/arch/x86/lib/zimage.c +++ b/arch/x86/lib/zimage.c @@ -36,6 +36,10 @@ #include <asm/realmode.h> #include <asm/byteorder.h> #include <asm/bootparam.h> +#ifdef CONFIG_SYS_COREBOOT +#include <asm/arch/timestamp.h> +#endif +#include <linux/compiler.h> /* * Memory lay-out: @@ -171,7 +175,7 @@ struct boot_params *load_zimage(char *image, unsigned long kernel_size, else *load_address = (void *)ZIMAGE_LOAD_ADDR; -#if defined CONFIG_ZBOOT_32 +#if (defined CONFIG_ZBOOT_32 || defined CONFIG_X86_NO_REAL_MODE) printf("Building boot_params at 0x%8.8lx\n", (ulong)setup_base); memset(setup_base, 0, sizeof(*setup_base)); setup_base->hdr = params->hdr; @@ -237,7 +241,7 @@ int setup_zimage(struct boot_params *setup_base, char *cmd_line, int auto_boot, struct setup_header *hdr = &setup_base->hdr; int bootproto = get_boot_protocol(hdr); -#if defined CONFIG_ZBOOT_32 +#if (defined CONFIG_ZBOOT_32 || defined CONFIG_X86_NO_REAL_MODE) setup_base->e820_entries = install_e820_map( ARRAY_SIZE(setup_base->e820_map), setup_base->e820_map); #endif @@ -279,10 +283,23 @@ int setup_zimage(struct boot_params *setup_base, char *cmd_line, int auto_boot, return 0; } +/* + * Implement a weak default function for boards that optionally + * need to clean up the system before jumping to the kernel. + */ +__weak void board_final_cleanup(void) +{ +} + void boot_zimage(void *setup_base, void *load_address) { + board_final_cleanup(); + printf("\nStarting kernel ...\n\n"); +#ifdef CONFIG_SYS_COREBOOT + timestamp_add_now(TS_U_BOOT_START_KERNEL); +#endif #if defined CONFIG_ZBOOT_32 /* * Set %ebx, %ebp, and %edi to 0, %esi to point to the boot_params @@ -292,9 +309,9 @@ void boot_zimage(void *setup_base, void *load_address) * itself in arch/i386/cpu/cpu.c. */ __asm__ __volatile__ ( - "movl $0, %%ebp \n" - "cli \n" - "jmp %[kernel_entry] \n" + "movl $0, %%ebp\n" + "cli\n" + "jmp *%[kernel_entry]\n" :: [kernel_entry]"a"(load_address), [boot_params] "S"(setup_base), "b"(0), "D"(0) |