summaryrefslogtreecommitdiff
path: root/arch/arm
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/Kconfig8
-rw-r--r--arch/arm/cpu/armv7/Makefile2
-rw-r--r--arch/arm/cpu/armv7/ls102xa/Kconfig87
-rw-r--r--arch/arm/cpu/armv7/ls102xa/soc.c4
-rw-r--r--arch/arm/cpu/armv8/fsl-layerscape/Kconfig129
-rw-r--r--arch/arm/cpu/armv8/fsl-layerscape/cpu.c24
-rw-r--r--arch/arm/cpu/armv8/fsl-layerscape/fdt.c20
-rw-r--r--arch/arm/cpu/armv8/fsl-layerscape/mp.c16
-rw-r--r--arch/arm/cpu/armv8/fsl-layerscape/soc.c21
-rw-r--r--arch/arm/dts/fsl-ls1043a.dtsi21
-rw-r--r--arch/arm/dts/fsl-ls2080a.dtsi14
-rw-r--r--arch/arm/include/asm/arch-fsl-layerscape/config.h29
-rw-r--r--arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h4
-rw-r--r--arch/arm/include/asm/arch-fsl-layerscape/mp.h1
-rw-r--r--arch/arm/include/asm/arch-fsl-layerscape/soc.h3
-rw-r--r--arch/arm/include/asm/arch-ls102xa/config.h13
16 files changed, 338 insertions, 58 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 2d3303bdae..ada221778c 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -656,6 +656,7 @@ config TARGET_VEXPRESS64_JUNO
config TARGET_LS2080A_EMU
bool "Support ls2080a_emu"
+ select ARCH_LS2080A
select ARM64
select ARMV8_MULTIENTRY
help
@@ -666,6 +667,7 @@ config TARGET_LS2080A_EMU
config TARGET_LS2080A_SIMU
bool "Support ls2080a_simu"
+ select ARCH_LS2080A
select ARM64
select ARMV8_MULTIENTRY
help
@@ -676,6 +678,7 @@ config TARGET_LS2080A_SIMU
config TARGET_LS2080AQDS
bool "Support ls2080aqds"
+ select ARCH_LS2080A
select ARM64
select ARMV8_MULTIENTRY
select SUPPORT_SPL
@@ -687,6 +690,7 @@ config TARGET_LS2080AQDS
config TARGET_LS2080ARDB
bool "Support ls2080ardb"
+ select ARCH_LS2080A
select ARM64
select ARMV8_MULTIENTRY
select SUPPORT_SPL
@@ -740,6 +744,8 @@ config TARGET_LS1012AFRDM
config TARGET_LS1021AQDS
bool "Support ls1021aqds"
select CPU_V7
+ select CPU_V7_HAS_NONSEC
+ select CPU_V7_HAS_VIRT
select SUPPORT_SPL
select ARCH_LS1021A
select ARCH_SUPPORT_PSCI
@@ -748,6 +754,8 @@ config TARGET_LS1021AQDS
config TARGET_LS1021ATWR
bool "Support ls1021atwr"
select CPU_V7
+ select CPU_V7_HAS_NONSEC
+ select CPU_V7_HAS_VIRT
select SUPPORT_SPL
select ARCH_LS1021A
select ARCH_SUPPORT_PSCI
diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile
index 0d4bfbc55b..c1eeefd5dd 100644
--- a/arch/arm/cpu/armv7/Makefile
+++ b/arch/arm/cpu/armv7/Makefile
@@ -12,7 +12,7 @@ obj-y += cache_v7.o cache_v7_asm.o
obj-y += cpu.o cp15.o
obj-y += syslib.o
-ifneq ($(CONFIG_AM43XX)$(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_MX7)$(CONFIG_TI81XX)$(CONFIG_AT91FAMILY)$(CONFIG_SUNXI)$(CONFIG_ARCH_SOCFPGA),)
+ifneq ($(CONFIG_AM43XX)$(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_MX7)$(CONFIG_TI81XX)$(CONFIG_AT91FAMILY)$(CONFIG_SUNXI)$(CONFIG_ARCH_SOCFPGA)$(CONFIG_LS102XA),)
ifneq ($(CONFIG_SKIP_LOWLEVEL_INIT),y)
obj-y += lowlevel_init.o
endif
diff --git a/arch/arm/cpu/armv7/ls102xa/Kconfig b/arch/arm/cpu/armv7/ls102xa/Kconfig
index 920eb4ad98..28bf778d9c 100644
--- a/arch/arm/cpu/armv7/ls102xa/Kconfig
+++ b/arch/arm/cpu/armv7/ls102xa/Kconfig
@@ -1,6 +1,89 @@
config ARCH_LS1021A
- bool "Freescale Layerscape LS1021A SoC"
+ bool
select SYS_FSL_ERRATUM_A010315
+ select SYS_FSL_SRDS_1
+ select SYS_HAS_SERDES
+ select SYS_FSL_DDR_BE
+ select SYS_FSL_DDR_VER_50
+
+menu "LS102xA architecture"
+ depends on ARCH_LS1021A
config LS1_DEEP_SLEEP
- bool "Freescale Layerscape 1 deep sleep"
+ bool "Deep sleep"
+ depends on ARCH_LS1021A
+
+config MAX_CPUS
+ int "Maximum number of CPUs permitted for LS102xA"
+ depends on ARCH_LS1021A
+ default 2
+ help
+ Set this number to the maximum number of possible CPUs in the SoC.
+ SoCs may have multiple clusters with each cluster may have multiple
+ ports. If some ports are reserved but higher ports are used for
+ cores, count the reserved ports. This will allocate enough memory
+ in spin table to properly handle all cores.
+
+config NUM_DDR_CONTROLLERS
+ int "Maximum DDR controllers"
+ default 1
+
+config SYS_FSL_ERRATUM_A010315
+ bool "Workaround for PCIe erratum A010315"
+
+config SYS_FSL_SRDS_1
+ bool
+
+config SYS_FSL_SRDS_2
+ bool
+
+config SYS_HAS_SERDES
+ bool
+
+config SYS_FSL_DDR
+ bool "Freescale DDR driver"
+ help
+ Select Freescale General DDR driver, shared between most Freescale
+ PowerPC- based SoCs (such as mpc83xx, mpc85xx, mpc86xx) and ARM-
+ based Layerscape SoCs (such as ls2080a).
+
+config SYS_FSL_DDR_BE
+ bool
+ default y
+ help
+ Access DDR registers in big-endian.
+
+config SYS_FSL_DDR_VER
+ int
+ default 50 if SYS_FSL_DDR_VER_50
+
+config SYS_FSL_DDR_VER_50
+ bool
+
+config SYS_FSL_DDRC_ARM_GEN3
+ bool
+
+config SYS_FSL_DDRC_GEN4
+ bool
+
+config SYS_FSL_DDR3
+ bool "Freescale DDR3 controller"
+ depends on !SYS_FSL_DDR4
+ select SYS_FSL_DDR
+ select SYS_FSL_DDRC_ARM_GEN3
+ help
+ Enable Freescale DDR3 controller on ARM-based SoCs.
+
+config SYS_FSL_DDR4
+ bool "Freescale DDR4 controller"
+ select SYS_FSL_DDR
+ select SYS_FSL_DDRC_GEN4
+ help
+ Enable Freescale DDR4 controller.
+
+config SYS_FSL_IFC_BANK_COUNT
+ int "Maximum banks of Integrated flash controller"
+ depends on ARCH_LS1021A
+ default 8
+
+endmenu
diff --git a/arch/arm/cpu/armv7/ls102xa/soc.c b/arch/arm/cpu/armv7/ls102xa/soc.c
index 31f00cbd69..52fb6f8d51 100644
--- a/arch/arm/cpu/armv7/ls102xa/soc.c
+++ b/arch/arm/cpu/armv7/ls102xa/soc.c
@@ -60,6 +60,10 @@ unsigned int get_soc_major_rev(void)
return major;
}
+void s_init(void)
+{
+}
+
#ifdef CONFIG_SYS_FSL_ERRATUM_A010315
void erratum_a010315(void)
{
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index f8057baa03..94ec8d502b 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -1,17 +1,138 @@
config ARCH_LS1012A
- bool "Freescale Layerscape LS1012A SoC"
+ bool
+ select FSL_LSCH2
+ select SYS_FSL_DDR_BE
select SYS_FSL_MMDC
select SYS_FSL_ERRATUM_A010315
config ARCH_LS1043A
- bool "Freescale Layerscape LS1043A SoC"
+ bool
+ select FSL_LSCH2
+ select SYS_FSL_DDR_BE
+ select SYS_FSL_DDR_VER_50
select SYS_FSL_ERRATUM_A010315
+ select SYS_FSL_ERRATUM_A010539
config ARCH_LS1046A
- bool "Freescale Layerscape LS1046A SoC"
+ bool
+ select FSL_LSCH2
+ select SYS_FSL_DDR_BE
+ select SYS_FSL_DDR4
+ select SYS_FSL_DDR_VER_50
+ select SYS_FSL_ERRATUM_A010539
+ select SYS_FSL_SRDS_2
+
+config ARCH_LS2080A
+ bool
+ select FSL_LSCH3
+ select SYS_FSL_DDR4
+ select SYS_FSL_DDR_LE
+ select SYS_FSL_DDR_VER_50
+ select SYS_FSL_HAS_DP_DDR
+ select SYS_FSL_SRDS_2
+
+config FSL_LSCH2
+ bool
+ select SYS_FSL_SRDS_1
+ select SYS_HAS_SERDES
+
+config FSL_LSCH3
+ bool
+ select SYS_FSL_SRDS_1
+ select SYS_HAS_SERDES
+
+menu "Layerscape architecture"
+ depends on FSL_LSCH2 || FSL_LSCH3
config SYS_FSL_MMDC
- bool "Freescale Multi Mode DDR Controller"
+ bool
config SYS_FSL_ERRATUM_A010315
bool "Workaround for PCIe erratum A010315"
+
+config SYS_FSL_ERRATUM_A010539
+ bool "Workaround for PIN MUX erratum A010539"
+
+config MAX_CPUS
+ int "Maximum number of CPUs permitted for Layerscape"
+ default 4 if ARCH_LS1043A
+ default 4 if ARCH_LS1046A
+ default 16 if ARCH_LS2080A
+ default 1
+ help
+ Set this number to the maximum number of possible CPUs in the SoC.
+ SoCs may have multiple clusters with each cluster may have multiple
+ ports. If some ports are reserved but higher ports are used for
+ cores, count the reserved ports. This will allocate enough memory
+ in spin table to properly handle all cores.
+
+config NUM_DDR_CONTROLLERS
+ int "Maximum DDR controllers"
+ default 3 if ARCH_LS2080A
+ default 1
+
+config SYS_FSL_IFC_BANK_COUNT
+ int "Maximum banks of Integrated flash controller"
+ depends on ARCH_LS1043A || ARCH_LS1046A || ARCH_LS2080A
+ default 4 if ARCH_LS1043A
+ default 4 if ARCH_LS1046A
+ default 8 if ARCH_LS2080A
+
+config SYS_FSL_HAS_DP_DDR
+ bool
+
+config SYS_FSL_SRDS_1
+ bool
+
+config SYS_FSL_SRDS_2
+ bool
+
+config SYS_HAS_SERDES
+ bool
+
+config SYS_FSL_DDR
+ bool "Freescale DDR driver"
+ help
+ Select Freescale General DDR driver, shared between most Freescale
+ PowerPC- based SoCs (such as mpc83xx, mpc85xx, mpc86xx) and ARM-
+ based Layerscape SoCs (such as ls2080a).
+
+config SYS_FSL_DDR_BE
+ bool
+ help
+ Access DDR registers in big-endian.
+
+config SYS_FSL_DDR_LE
+ bool
+ help
+ Access DDR registers in little-endian.
+
+config SYS_FSL_DDR_VER
+ int
+ default 50 if SYS_FSL_DDR_VER_50
+
+config SYS_FSL_DDR_VER_50
+ bool
+
+config SYS_FSL_DDRC_ARM_GEN3
+ bool
+
+config SYS_FSL_DDRC_GEN4
+ bool
+
+config SYS_FSL_DDR3
+ bool "Freescale DDR3 controller"
+ depends on !SYS_FSL_DDR4
+ select SYS_FSL_DDR
+ select SYS_FSL_DDRC_ARM_GEN3
+ help
+ Enable Freescale DDR3 controller on ARM-based SoCs.
+
+config SYS_FSL_DDR4
+ bool "Freescale DDR4 controller"
+ select SYS_FSL_DDR
+ select SYS_FSL_DDRC_GEN4
+ help
+ Enable Freescale DDR4 controller.
+
+endmenu
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
index f865373df3..b7a2e0c946 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
@@ -44,6 +44,9 @@ void cpu_name(char *name)
if (IS_E_PROCESSOR(svr))
strcat(name, "E");
+
+ sprintf(name + strlen(name), " Rev%d.%d",
+ SVR_MAJ(svr), SVR_MIN(svr));
break;
}
@@ -200,6 +203,27 @@ static inline u32 initiator_type(u32 cluster, int init_id)
return 0;
}
+u32 cpu_pos_mask(void)
+{
+ struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+ int i = 0;
+ u32 cluster, type, mask = 0;
+
+ do {
+ int j;
+
+ cluster = gur_in32(&gur->tp_cluster[i].lower);
+ for (j = 0; j < TP_INIT_PER_CLUSTER; j++) {
+ type = initiator_type(cluster, j);
+ if (type && (TP_ITYP_TYPE(type) == TP_ITYP_TYPE_ARM))
+ mask |= 1 << (i * TP_INIT_PER_CLUSTER + j);
+ }
+ i++;
+ } while ((cluster & TP_CLUSTER_EOC) == 0x0);
+
+ return mask;
+}
+
u32 cpu_mask(void)
{
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
index 40d6a761e8..1a8321b0e4 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
@@ -108,6 +108,24 @@ remove_psci_node:
}
#endif
+void fsl_fdt_disable_usb(void *blob)
+{
+ int off;
+ /*
+ * SYSCLK is used as a reference clock for USB. When the USB
+ * controller is used, SYSCLK must meet the additional requirement
+ * of 100 MHz.
+ */
+ if (CONFIG_SYS_CLK_FREQ != 100000000) {
+ off = fdt_node_offset_by_compatible(blob, -1, "snps,dwc3");
+ while (off != -FDT_ERR_NOTFOUND) {
+ fdt_status_disabled(blob, off);
+ off = fdt_node_offset_by_compatible(blob, off,
+ "snps,dwc3");
+ }
+ }
+}
+
void ft_cpu_setup(void *blob, bd_t *bd)
{
#ifdef CONFIG_FSL_LSCH2
@@ -150,4 +168,6 @@ void ft_cpu_setup(void *blob, bd_t *bd)
#ifdef CONFIG_SYS_DPAA_FMAN
fdt_fixup_fman_firmware(blob);
#endif
+ fsl_fdt_disable_usb(blob);
+
}
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/mp.c b/arch/arm/cpu/armv8/fsl-layerscape/mp.c
index df7ffb88f6..f607c3900a 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/mp.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/mp.c
@@ -104,6 +104,11 @@ int is_core_valid(unsigned int core)
return !!((1 << core) & cpu_mask());
}
+static int is_pos_valid(unsigned int pos)
+{
+ return !!((1 << pos) & cpu_pos_mask());
+}
+
int is_core_online(u64 cpu_id)
{
u64 *table;
@@ -126,9 +131,9 @@ int cpu_disable(int nr)
return 0;
}
-int core_to_pos(int nr)
+static int core_to_pos(int nr)
{
- u32 cores = cpu_mask();
+ u32 cores = cpu_pos_mask();
int i, count = 0;
if (nr == 0) {
@@ -139,14 +144,17 @@ int core_to_pos(int nr)
}
for (i = 1; i < 32; i++) {
- if (is_core_valid(i)) {
+ if (is_pos_valid(i)) {
count++;
if (count == nr)
break;
}
}
- return count;
+ if (count != nr)
+ return -1;
+
+ return i;
}
int cpu_status(int nr)
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
index 463d1e30d2..d68eeba349 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
@@ -233,9 +233,8 @@ int sata_init(void)
out_le32((void *)CONFIG_SYS_DCSR_DCFG_ADDR + 0x520, 0x80000000);
#endif
out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG);
- out_le32(&ccsr_ahci->pp2c, AHCI_PORT_PHY_2_CFG);
- out_le32(&ccsr_ahci->pp3c, AHCI_PORT_PHY_3_CFG);
out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG);
+ out_le32(&ccsr_ahci->axicc, AHCI_PORT_AXICC_CFG);
ahci_init((void __iomem *)CONFIG_SYS_SATA);
scsi_scan(0);
@@ -321,6 +320,19 @@ void erratum_a010315(void)
}
#endif
+static void erratum_a010539(void)
+{
+#if defined(CONFIG_SYS_FSL_ERRATUM_A010539) && defined(CONFIG_QSPI_BOOT)
+ struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+ u32 porsr1;
+
+ porsr1 = in_be32(&gur->porsr1);
+ porsr1 &= ~FSL_CHASSIS2_CCSR_PORSR1_RCW_MASK;
+ out_be32((void *)(CONFIG_SYS_DCSR_DCFG_ADDR + DCFG_DCSR_PORCR1),
+ porsr1);
+#endif
+}
+
void fsl_lsch2_early_init_f(void)
{
struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
@@ -339,7 +351,9 @@ void fsl_lsch2_early_init_f(void)
#endif
/* Make SEC reads and writes snoopable */
setbits_be32(&scfg->snpcnfgcr, SCFG_SNPCNFGCR_SECRDSNP |
- SCFG_SNPCNFGCR_SECWRSNP);
+ SCFG_SNPCNFGCR_SECWRSNP |
+ SCFG_SNPCNFGCR_SATARDSNP |
+ SCFG_SNPCNFGCR_SATAWRSNP);
/*
* Enable snoop requests and DVM message requests for
@@ -352,6 +366,7 @@ void fsl_lsch2_early_init_f(void)
erratum_a008850_early(); /* part 1 of 2 */
erratum_a009929();
erratum_a009660();
+ erratum_a010539();
}
#endif
diff --git a/arch/arm/dts/fsl-ls1043a.dtsi b/arch/arm/dts/fsl-ls1043a.dtsi
index a8bffbafa7..f038f96171 100644
--- a/arch/arm/dts/fsl-ls1043a.dtsi
+++ b/arch/arm/dts/fsl-ls1043a.dtsi
@@ -215,5 +215,26 @@
big-endian;
status = "disabled";
};
+
+ usb0: usb3@2f00000 {
+ compatible = "fsl,layerscape-dwc3";
+ reg = <0x0 0x2f00000 0x0 0x10000>;
+ interrupts = <0 60 0x4>;
+ dr_mode = "host";
+ };
+
+ usb1: usb3@3000000 {
+ compatible = "fsl,layerscape-dwc3";
+ reg = <0x0 0x3000000 0x0 0x10000>;
+ interrupts = <0 61 0x4>;
+ dr_mode = "host";
+ };
+
+ usb2: usb3@3100000 {
+ compatible = "fsl,layerscape-dwc3";
+ reg = <0x0 0x3100000 0x0 0x10000>;
+ interrupts = <0 63 0x4>;
+ dr_mode = "host";
+ };
};
};
diff --git a/arch/arm/dts/fsl-ls2080a.dtsi b/arch/arm/dts/fsl-ls2080a.dtsi
index b308c8b982..f76e981c54 100644
--- a/arch/arm/dts/fsl-ls2080a.dtsi
+++ b/arch/arm/dts/fsl-ls2080a.dtsi
@@ -75,4 +75,18 @@
reg-names = "QuadSPI", "QuadSPI-memory";
num-cs = <4>;
};
+
+ usb0: usb3@3100000 {
+ compatible = "fsl,layerscape-dwc3";
+ reg = <0x0 0x3100000 0x0 0x10000>;
+ interrupts = <0 80 0x4>; /* Level high type */
+ dr_mode = "host";
+ };
+
+ usb1: usb3@3110000 {
+ compatible = "fsl,layerscape-dwc3";
+ reg = <0x0 0x3110000 0x0 0x10000>;
+ interrupts = <0 81 0x4>; /* Level high type */
+ dr_mode = "host";
+ };
};
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h
index a5c6c4cd26..4201e0fbec 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/config.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h
@@ -12,17 +12,6 @@
#define CONFIG_STANDALONE_LOAD_ADDR 0x80300000
-#ifdef CONFIG_SYS_FSL_DDR4
-#define CONFIG_SYS_FSL_DDRC_GEN4
-#else
-#define CONFIG_SYS_FSL_DDRC_ARM_GEN3 /* Enable Freescale ARM DDR3 driver */
-#endif
-
-#ifndef CONFIG_ARCH_LS1012A
-#define CONFIG_SYS_FSL_DDR /* Freescale DDR driver */
-#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_5_0
-#endif
-
/*
* Reserve secure memory
* To be aligned with MMU block size
@@ -30,14 +19,8 @@
#define CONFIG_SYS_MEM_RESERVE_SECURE (2048 * 1024) /* 2MB */
#ifdef CONFIG_LS2080A
-#define CONFIG_MAX_CPUS 16
-#define CONFIG_SYS_FSL_IFC_BANK_COUNT 8
-#define CONFIG_NUM_DDR_CONTROLLERS 3
-#define CONFIG_SYS_FSL_HAS_DP_DDR /* Runtime check to confirm */
#define CONFIG_SYS_FSL_CLUSTER_CLOCKS { 1, 1, 4, 4 }
#define SRDS_MAX_LANES 8
-#define CONFIG_SYS_FSL_SRDS_1
-#define CONFIG_SYS_FSL_SRDS_2
#define CONFIG_SYS_PAGE_SIZE 0x10000
#ifndef L1_CACHE_BYTES
#define L1_CACHE_SHIFT 6
@@ -48,7 +31,6 @@
#define CONFIG_SYS_FSL_OCRAM_SIZE 0x00200000 /* 2M */
/* DDR */
-#define CONFIG_SYS_FSL_DDR_LE
#define CONFIG_SYS_LS2_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30)
#define CONFIG_MAX_MEM_MAPPED CONFIG_SYS_LS2_DDR_BLOCK1_SIZE
@@ -152,7 +134,6 @@
#define CONFIG_SYS_FSL_MAX_NUM_OF_SEC 1
#elif defined(CONFIG_FSL_LSCH2)
-#define CONFIG_NUM_DDR_CONTROLLERS 1
#define CONFIG_SYS_FSL_SEC_COMPAT 5
#define CONFIG_SYS_FSL_OCRAM_BASE 0x10000000 /* initial RAM */
#define CONFIG_SYS_FSL_OCRAM_SIZE 0x00200000 /* 2M */
@@ -167,17 +148,12 @@
#define CONFIG_SYS_FSL_PEX_LUT_BE
#define CONFIG_SYS_FSL_SEC_BE
-#define CONFIG_SYS_FSL_SRDS_1
-
/* SoC related */
#ifdef CONFIG_LS1043A
-#define CONFIG_MAX_CPUS 4
#define CONFIG_SYS_FMAN_V3
#define CONFIG_SYS_NUM_FMAN 1
#define CONFIG_SYS_NUM_FM1_DTSEC 7
#define CONFIG_SYS_NUM_FM1_10GEC 1
-#define CONFIG_SYS_FSL_IFC_BANK_COUNT 4
-#define CONFIG_SYS_FSL_DDR_BE
#define CONFIG_SYS_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30)
#define CONFIG_MAX_MEM_MAPPED CONFIG_SYS_DDR_BLOCK1_SIZE
@@ -206,23 +182,18 @@
#define CONFIG_SYS_FSL_ERRATUM_A009660
#define CONFIG_SYS_FSL_MAX_NUM_OF_SEC 1
#elif defined(CONFIG_ARCH_LS1012A)
-#define CONFIG_MAX_CPUS 1
#undef CONFIG_SYS_FSL_DDRC_ARM_GEN3
#define GICD_BASE 0x01401000
#define GICC_BASE 0x01402000
#elif defined(CONFIG_ARCH_LS1046A)
-#define CONFIG_MAX_CPUS 4
#define CONFIG_SYS_FMAN_V3
#define CONFIG_SYS_NUM_FMAN 1
#define CONFIG_SYS_NUM_FM1_DTSEC 8
#define CONFIG_SYS_NUM_FM1_10GEC 2
-#define CONFIG_SYS_FSL_IFC_BANK_COUNT 4
-#define CONFIG_SYS_FSL_DDR_BE
#define CONFIG_SYS_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30)
#define CONFIG_MAX_MEM_MAPPED CONFIG_SYS_DDR_BLOCK1_SIZE
-#define CONFIG_SYS_FSL_SRDS_2
#define CONFIG_SYS_FSL_IFC_BE
#define CONFIG_SYS_FSL_SFP_VER_3_2
#define CONFIG_SYS_FSL_SNVS_LE
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
index df5187195d..d88543d063 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
@@ -168,6 +168,8 @@ struct sys_info {
(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_JR0_OFFSET)
/* Device Configuration and Pin Control */
+#define DCFG_DCSR_PORCR1 0x0
+
struct ccsr_gur {
u32 porsr1; /* POR status 1 */
#define FSL_CHASSIS2_CCSR_PORSR1_RCW_MASK 0xFF800000
@@ -335,6 +337,8 @@ struct ccsr_gur {
#define SCFG_SNPCNFGCR_SECRDSNP 0x80000000
#define SCFG_SNPCNFGCR_SECWRSNP 0x40000000
+#define SCFG_SNPCNFGCR_SATARDSNP 0x00800000
+#define SCFG_SNPCNFGCR_SATAWRSNP 0x00400000
/* Supplemental Configuration Unit */
struct ccsr_scfg {
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/mp.h b/arch/arm/include/asm/arch-fsl-layerscape/mp.h
index e46e076f16..f7306ff266 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/mp.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/mp.h
@@ -34,5 +34,6 @@ void *get_spin_tbl_addr(void);
phys_addr_t determine_mp_bootpg(void);
void secondary_boot_func(void);
int is_core_online(u64 cpu_id);
+u32 cpu_pos_mask(void);
#endif
#endif /* _FSL_LAYERSCAPE_MP_H */
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/soc.h b/arch/arm/include/asm/arch-fsl-layerscape/soc.h
index 4512732f79..58e90d8d88 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/soc.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/soc.h
@@ -60,9 +60,8 @@ struct cpu_type {
/* ahci port register default value */
#define AHCI_PORT_PHY_1_CFG 0xa003fffe
-#define AHCI_PORT_PHY_2_CFG 0x28184d1f
-#define AHCI_PORT_PHY_3_CFG 0x0e081509
#define AHCI_PORT_TRANS_CFG 0x08000029
+#define AHCI_PORT_AXICC_CFG 0x3fffffff
/* AHCI (sata) register map */
struct ccsr_ahci {
diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h
index fab8774028..ec65cc0bb2 100644
--- a/arch/arm/include/asm/arch-ls102xa/config.h
+++ b/arch/arm/include/asm/arch-ls102xa/config.h
@@ -94,14 +94,7 @@
#define CONFIG_SYS_FSL_ERRATUM_A008407
#ifdef CONFIG_DDR_SPD
-#define CONFIG_SYS_FSL_DDR_BE
#define CONFIG_VERY_BIG_RAM
-#ifdef CONFIG_SYS_FSL_DDR4
-#define CONFIG_SYS_FSL_DDRC_GEN4
-#else
-#define CONFIG_SYS_FSL_DDRC_ARM_GEN3
-#endif
-#define CONFIG_SYS_FSL_DDR
#define CONFIG_SYS_LS1_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30)
#define CONFIG_MAX_MEM_MAPPED CONFIG_SYS_LS1_DDR_BLOCK1_SIZE
#endif
@@ -120,13 +113,7 @@
#define DCU_LAYER_MAX_NUM 16
-#define CONFIG_SYS_FSL_SRDS_1
-
#ifdef CONFIG_LS102XA
-#define CONFIG_MAX_CPUS 2
-#define CONFIG_SYS_FSL_IFC_BANK_COUNT 8
-#define CONFIG_NUM_DDR_CONTROLLERS 1
-#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_5_0
#define CONFIG_SYS_FSL_SEC_COMPAT 5
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
#define CONFIG_SYS_FSL_ERRATUM_A008378
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-28 13:12:28 +0000