diff options
-rw-r--r-- | arch/arm/dts/Makefile | 3 | ||||
-rw-r--r-- | arch/arm/dts/r7s72100-gr-peach-u-boot.dts | 78 | ||||
-rw-r--r-- | arch/arm/dts/r7s72100-gr-peach.dts | 134 | ||||
-rw-r--r-- | arch/arm/mach-rmobile/Kconfig.rza1 | 7 | ||||
-rw-r--r-- | board/renesas/grpeach/Kconfig | 12 | ||||
-rw-r--r-- | board/renesas/grpeach/MAINTAINERS | 6 | ||||
-rw-r--r-- | board/renesas/grpeach/Makefile | 8 | ||||
-rw-r--r-- | board/renesas/grpeach/grpeach.c | 52 | ||||
-rw-r--r-- | board/renesas/grpeach/lowlevel_init.S | 107 | ||||
-rw-r--r-- | configs/grpeach_defconfig | 53 | ||||
-rw-r--r-- | include/configs/grpeach.h | 53 |
11 files changed, 513 insertions, 0 deletions
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 8e082f2840..a199f3f988 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -603,6 +603,9 @@ dtb-$(CONFIG_RCAR_GEN3) += \ r8a77990-ebisu-u-boot.dtb \ r8a77995-draak-u-boot.dtb +dtb-$(CONFIG_RZA1) += \ + r7s72100-gr-peach-u-boot.dtb + dtb-$(CONFIG_SOC_KEYSTONE) += keystone-k2hk-evm.dtb \ keystone-k2l-evm.dtb \ keystone-k2e-evm.dtb \ diff --git a/arch/arm/dts/r7s72100-gr-peach-u-boot.dts b/arch/arm/dts/r7s72100-gr-peach-u-boot.dts new file mode 100644 index 0000000000..28247d19d7 --- /dev/null +++ b/arch/arm/dts/r7s72100-gr-peach-u-boot.dts @@ -0,0 +1,78 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source extras for U-Boot for the GR Peach board + * + * Copyright (C) 2019 Marek Vasut <marek.vasut@gmail.com> + */ + +#include "r7s72100-gr-peach.dts" + +/ { + aliases { + spi0 = &rpc; + }; + + soc { + u-boot,dm-pre-reloc; + }; + + leds { + led1 { + label = "peach:bottom:red"; + }; + + led-red { + label = "peach:tri:red"; + gpios = <&port6 13 GPIO_ACTIVE_HIGH>; + }; + + led-green { + label = "peach:tri:green"; + gpios = <&port6 14 GPIO_ACTIVE_HIGH>; + }; + + led-blue { + label = "peach:tri:blue"; + gpios = <&port6 15 GPIO_ACTIVE_HIGH>; + }; + }; + + rpc: rpc@0xee200000 { + compatible = "renesas,rpc-r7s72100", "renesas,rpc"; + reg = <0x3fefa000 0x100>, <0x18000000 0x08000000>; + bank-width = <2>; + num-cs = <1>; + status = "okay"; + spi-max-frequency = <50000000>; + #address-cells = <1>; + #size-cells = <0>; + + flash0: spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <1>; + reg = <0>; + status = "okay"; + }; + }; +}; + +&ostm0 { + u-boot,dm-pre-reloc; +}; + +&pinctrl { + u-boot,dm-pre-reloc; +}; + +&scif2 { + u-boot,dm-pre-reloc; + clock = <66666666>; /* ToDo: Replace by DM clock driver */ +}; + +&scif2_pins { + u-boot,dm-pre-reloc; +}; diff --git a/arch/arm/dts/r7s72100-gr-peach.dts b/arch/arm/dts/r7s72100-gr-peach.dts new file mode 100644 index 0000000000..fe1a4aa4d7 --- /dev/null +++ b/arch/arm/dts/r7s72100-gr-peach.dts @@ -0,0 +1,134 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the GR-Peach board + * + * Copyright (C) 2017 Jacopo Mondi <jacopo+renesas@jmondi.org> + * Copyright (C) 2016 Renesas Electronics + */ + +/dts-v1/; +#include "r7s72100.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/r7s72100-pinctrl.h> + +/ { + model = "GR-Peach"; + compatible = "renesas,gr-peach", "renesas,r7s72100"; + + aliases { + serial0 = &scif2; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/mtdblock0"; + stdout-path = "serial0:115200n8"; + }; + + memory@20000000 { + device_type = "memory"; + reg = <0x20000000 0x00a00000>; + }; + + lbsc { + #address-cells = <1>; + #size-cells = <1>; + }; + + flash@18000000 { + compatible = "mtd-rom"; + probe-type = "map_rom"; + reg = <0x18000000 0x00800000>; + bank-width = <4>; + device-width = <1>; + + #address-cells = <1>; + #size-cells = <1>; + + rootfs@600000 { + label = "rootfs"; + reg = <0x00600000 0x00200000>; + }; + }; + + leds { + status = "okay"; + compatible = "gpio-leds"; + + led1 { + gpios = <&port6 12 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&pinctrl { + scif2_pins: serial2 { + /* P6_2 as RxD2; P6_3 as TxD2 */ + pinmux = <RZA1_PINMUX(6, 2, 7)>, <RZA1_PINMUX(6, 3, 7)>; + }; + + ether_pins: ether { + /* Ethernet on Ports 1,3,5,10 */ + pinmux = <RZA1_PINMUX(1, 14, 4)>, /* P1_14 = ET_COL */ + <RZA1_PINMUX(3, 0, 2)>, /* P3_0 = ET_TXCLK */ + <RZA1_PINMUX(3, 3, 2)>, /* P3_3 = ET_MDIO */ + <RZA1_PINMUX(3, 4, 2)>, /* P3_4 = ET_RXCLK */ + <RZA1_PINMUX(3, 5, 2)>, /* P3_5 = ET_RXER */ + <RZA1_PINMUX(3, 6, 2)>, /* P3_6 = ET_RXDV */ + <RZA1_PINMUX(5, 9, 2)>, /* P5_9 = ET_MDC */ + <RZA1_PINMUX(10, 1, 4)>, /* P10_1 = ET_TXER */ + <RZA1_PINMUX(10, 2, 4)>, /* P10_2 = ET_TXEN */ + <RZA1_PINMUX(10, 3, 4)>, /* P10_3 = ET_CRS */ + <RZA1_PINMUX(10, 4, 4)>, /* P10_4 = ET_TXD0 */ + <RZA1_PINMUX(10, 5, 4)>, /* P10_5 = ET_TXD1 */ + <RZA1_PINMUX(10, 6, 4)>, /* P10_6 = ET_TXD2 */ + <RZA1_PINMUX(10, 7, 4)>, /* P10_7 = ET_TXD3 */ + <RZA1_PINMUX(10, 8, 4)>, /* P10_8 = ET_RXD0 */ + <RZA1_PINMUX(10, 9, 4)>, /* P10_9 = ET_RXD1 */ + <RZA1_PINMUX(10, 10, 4)>,/* P10_10 = ET_RXD2 */ + <RZA1_PINMUX(10, 11, 4)>;/* P10_11 = ET_RXD3 */ + }; +}; + +&extal_clk { + clock-frequency = <13333000>; +}; + +&usb_x1_clk { + clock-frequency = <48000000>; +}; + +&mtu2 { + status = "okay"; +}; + +&ostm0 { + status = "okay"; +}; + +&ostm1 { + status = "okay"; +}; + +&scif2 { + pinctrl-names = "default"; + pinctrl-0 = <&scif2_pins>; + + status = "okay"; +}; + +ðer { + pinctrl-names = "default"; + pinctrl-0 = <ðer_pins>; + + status = "okay"; + + renesas,no-ether-link; + phy-handle = <&phy0>; + + phy0: ethernet-phy@0 { + reg = <0>; + + reset-gpios = <&port4 2 GPIO_ACTIVE_LOW>; + reset-delay-us = <5>; + }; +}; diff --git a/arch/arm/mach-rmobile/Kconfig.rza1 b/arch/arm/mach-rmobile/Kconfig.rza1 index efb703b92b..8cf033fb13 100644 --- a/arch/arm/mach-rmobile/Kconfig.rza1 +++ b/arch/arm/mach-rmobile/Kconfig.rza1 @@ -13,9 +13,16 @@ config CPU_RZA1 choice prompt "Renesas RZ/A1 board select" +# Renesas Supported Boards +config TARGET_GRPEACH + bool "GR-PEACH board" + endchoice config SYS_SOC default "rmobile" +# Renesas Supported Boards +source "board/renesas/grpeach/Kconfig" + endif diff --git a/board/renesas/grpeach/Kconfig b/board/renesas/grpeach/Kconfig new file mode 100644 index 0000000000..00dc496b86 --- /dev/null +++ b/board/renesas/grpeach/Kconfig @@ -0,0 +1,12 @@ +if TARGET_GRPEACH + +config SYS_BOARD + default "grpeach" + +config SYS_VENDOR + default "renesas" + +config SYS_CONFIG_NAME + default "grpeach" + +endif diff --git a/board/renesas/grpeach/MAINTAINERS b/board/renesas/grpeach/MAINTAINERS new file mode 100644 index 0000000000..4ab7773b0a --- /dev/null +++ b/board/renesas/grpeach/MAINTAINERS @@ -0,0 +1,6 @@ +GRPEACH BOARD +M: Marek Vasut <marek.vasut@gmail.com> +S: Maintained +F: board/renesas/grpeach/ +F: include/configs/grpeach.h +F: configs/grpeach_defconfig diff --git a/board/renesas/grpeach/Makefile b/board/renesas/grpeach/Makefile new file mode 100644 index 0000000000..48e185ce3e --- /dev/null +++ b/board/renesas/grpeach/Makefile @@ -0,0 +1,8 @@ +# +# Copyright (C) 2017 Renesas Electronics +# Copyright (C) 2017 Chris Brandt +# +# SPDX-License-Identifier: GPL-2.0+ + +obj-y := grpeach.o +obj-y += lowlevel_init.o diff --git a/board/renesas/grpeach/grpeach.c b/board/renesas/grpeach/grpeach.c new file mode 100644 index 0000000000..4f901eea71 --- /dev/null +++ b/board/renesas/grpeach/grpeach.c @@ -0,0 +1,52 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2017 Renesas Electronics + * Copyright (C) Chris Brandt + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/sys_proto.h> + +#define RZA1_WDT_BASE 0xfcfe0000 +#define WTCSR 0x00 +#define WTCNT 0x02 +#define WRCSR 0x04 + +DECLARE_GLOBAL_DATA_PTR; + +int board_init(void) +{ + gd->bd->bi_boot_params = (CONFIG_SYS_SDRAM_BASE + 0x100); + + return 0; +} + +int dram_init(void) +{ + if (fdtdec_setup_mem_size_base() != 0) + return -EINVAL; + + return 0; +} + +int dram_init_banksize(void) +{ + fdtdec_setup_memory_banksize(); + + return 0; +} + +void reset_cpu(ulong addr) +{ + /* Dummy read (must read WRCSR:WOVF at least once before clearing) */ + readb(RZA1_WDT_BASE + WRCSR); + + writew(0xa500, RZA1_WDT_BASE + WRCSR); + writew(0x5a5f, RZA1_WDT_BASE + WRCSR); + writew(0x5a00, RZA1_WDT_BASE + WTCNT); + writew(0xa578, RZA1_WDT_BASE + WTCSR); + + for (;;) + asm volatile("wfi"); +} diff --git a/board/renesas/grpeach/lowlevel_init.S b/board/renesas/grpeach/lowlevel_init.S new file mode 100644 index 0000000000..9a66dfa6c6 --- /dev/null +++ b/board/renesas/grpeach/lowlevel_init.S @@ -0,0 +1,107 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2017 Renesas Electronics + * Copyright (C) 2017 Chris Brandt + */ +#include <config.h> +#include <version.h> +#include <asm/macro.h> + +/* Watchdog Registers */ +#define RZA1_WDT_BASE 0xFCFE0000 +#define WTCSR (RZA1_WDT_BASE + 0x00) /* Watchdog Timer Control Register */ +#define WTCNT (RZA1_WDT_BASE + 0x02) /* Watchdog Timer Counter Register */ +#define WRCSR (RZA1_WDT_BASE + 0x04) /* Watchdog Reset Control Register */ + +/* Standby controller registers (chapter 55) */ +#define RZA1_STBCR_BASE 0xFCFE0020 +#define STBCR1 (RZA1_STBCR_BASE + 0x00) +#define STBCR2 (RZA1_STBCR_BASE + 0x04) +#define STBCR3 (RZA1_STBCR_BASE + 0x400) +#define STBCR4 (RZA1_STBCR_BASE + 0x404) +#define STBCR5 (RZA1_STBCR_BASE + 0x408) +#define STBCR6 (RZA1_STBCR_BASE + 0x40c) +#define STBCR7 (RZA1_STBCR_BASE + 0x410) +#define STBCR8 (RZA1_STBCR_BASE + 0x414) +#define STBCR9 (RZA1_STBCR_BASE + 0x418) +#define STBCR10 (RZA1_STBCR_BASE + 0x41c) +#define STBCR11 (RZA1_STBCR_BASE + 0x420) +#define STBCR12 (RZA1_STBCR_BASE + 0x424) +#define STBCR13 (RZA1_STBCR_BASE + 0x450) + +/* Clock Registers */ +#define RZA1_FRQCR_BASE 0xFCFE0010 +#define FRQCR (RZA1_FRQCR_BASE + 0x00) +#define FRQCR2 (RZA1_FRQCR_BASE + 0x04) + +#define SYSCR1 0xFCFE0400 /* System control register 1 */ +#define SYSCR2 0xFCFE0404 /* System control register 2 */ +#define SYSCR3 0xFCFE0408 /* System control register 3 */ + +/* Disable WDT */ +#define WTCSR_D 0xA518 +#define WTCNT_D 0x5A00 + +/* Enable all peripheral clocks */ +#define STBCR3_D 0x00000000 +#define STBCR4_D 0x00000000 +#define STBCR5_D 0x00000000 +#define STBCR6_D 0x00000000 +#define STBCR7_D 0x00000024 +#define STBCR8_D 0x00000005 +#define STBCR9_D 0x00000000 +#define STBCR10_D 0x00000000 +#define STBCR11_D 0x000000c0 +#define STBCR12_D 0x000000f0 + +/* + * Set all system clocks to full speed. + * On reset, the CPU will be running at 1/2 speed. + * In the Hardware Manual, see Table 6.3 Settable Frequency Ranges + */ +#define FRQCR_D 0x0035 +#define FRQCR2_D 0x0001 + + .global lowlevel_init + + .text + .align 2 + +lowlevel_init: + /* PL310 init */ + write32 0x3fffff80, 0x00000001 + + /* Disable WDT */ + write16 WTCSR, WTCSR_D + write16 WTCNT, WTCNT_D + + /* Set clocks */ + write16 FRQCR, FRQCR_D + write16 FRQCR2, FRQCR2_D + + /* Enable all peripherals(Standby Control) */ + write8 STBCR3, STBCR3_D + write8 STBCR4, STBCR4_D + write8 STBCR5, STBCR5_D + write8 STBCR6, STBCR6_D + write8 STBCR7, STBCR7_D + write8 STBCR8, STBCR8_D + write8 STBCR9, STBCR9_D + write8 STBCR10, STBCR10_D + write8 STBCR11, STBCR11_D + write8 STBCR12, STBCR12_D + + /* For serial booting, enable read ahead caching to speed things up */ +#define DRCR_0 0x3FEFA00C + write32 DRCR_0, 0x00010100 /* Read Burst ON, Length=2 */ + + /* Enable all internal RAM */ + write8 SYSCR1, 0xFF + write8 SYSCR2, 0xFF + write8 SYSCR3, 0xFF + + nop + /* back to arch calling code */ + mov pc, lr + + .align 4 diff --git a/configs/grpeach_defconfig b/configs/grpeach_defconfig new file mode 100644 index 0000000000..32254b3b0e --- /dev/null +++ b/configs/grpeach_defconfig @@ -0,0 +1,53 @@ +CONFIG_ARM=y +# CONFIG_SPL_SYS_THUMB_BUILD is not set +CONFIG_ARCH_RMOBILE=y +CONFIG_SYS_TEXT_BASE=0x18000000 +CONFIG_RZA1=y +CONFIG_NR_DRAM_BANKS=1 +CONFIG_BOOTDELAY=3 +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_HUSH_PARSER=y +# CONFIG_CMD_ELF is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_SF=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_SNTP=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_MAC_PARTITION=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="r7s72100-gr-peach-u-boot" +CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_USE_ENV_SPI_BUS=y +CONFIG_ENV_SPI_BUS=0 +CONFIG_USE_ENV_SPI_CS=y +CONFIG_ENV_SPI_CS=0 +CONFIG_USE_ENV_SPI_MAX_HZ=y +CONFIG_ENV_SPI_MAX_HZ=50000000 +CONFIG_USE_ENV_SPI_MODE=y +CONFIG_ENV_SPI_MODE=0x0 +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_HAVE_BLOCK_DEVICE=y +CONFIG_DM_GPIO=y +CONFIG_RZA1_GPIO=y +CONFIG_LED=y +CONFIG_LED_GPIO=y +# CONFIG_MMC is not set +CONFIG_DM_SPI_FLASH=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_MACRONIX=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +CONFIG_DM_ETH=y +CONFIG_SH_ETHER=y +CONFIG_PINCTRL=y +CONFIG_SCIF_CONSOLE=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_RENESAS_RPC_SPI=y +CONFIG_TIMER=y +CONFIG_RENESAS_OSTM_TIMER=y +CONFIG_OF_LIBFDT_OVERLAY=y +# CONFIG_EFI_LOADER is not set diff --git a/include/configs/grpeach.h b/include/configs/grpeach.h new file mode 100644 index 0000000000..01704d84c2 --- /dev/null +++ b/include/configs/grpeach.h @@ -0,0 +1,53 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Configuration settings for the Renesas GRPEACH board + * + * Copyright (C) 2017-2019 Renesas Electronics + */ + +#ifndef __GRPEACH_H +#define __GRPEACH_H + +/* Board Clock , P1 clock frequency (XTAL=13.33MHz) */ +#define CONFIG_SYS_CLK_FREQ 66666666 + +/* Serial Console */ +#define CONFIG_BAUDRATE 115200 + +/* Miscellaneous */ +#define CONFIG_SYS_PBSIZE 256 +#define CONFIG_SYS_ARM_CACHE_WRITETHROUGH +#define CONFIG_CMDLINE_TAG +#define CONFIG_ARCH_CPU_INIT + +/* Internal RAM Size (RZ/A1=3M, RZ/A1M=5M, RZ/A1H=10M) */ +#define CONFIG_SYS_SDRAM_BASE 0x20000000 +#define CONFIG_SYS_SDRAM_SIZE (10 * 1024 * 1024) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE - 1024 * 1024) +#define CONFIG_SYS_LOAD_ADDR \ + (CONFIG_SYS_SDRAM_BASE + 4 * 1024 * 1024) + +#define CONFIG_ENV_OVERWRITE 1 +#define CONFIG_ENV_SECT_SIZE (64 * 1024) +#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_OFFSET 0xc0000 + +/* Malloc */ +#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) + +/* Kernel Boot */ +#define CONFIG_BOOTARGS "ignore_loglevel" + +/* Network interface */ +#define CONFIG_SH_ETHER_USE_PORT 0 +#define CONFIG_SH_ETHER_PHY_ADDR 0 +#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_MII +#define CONFIG_SH_ETHER_CACHE_WRITEBACK +#define CONFIG_SH_ETHER_CACHE_INVALIDATE +#define CONFIG_SH_ETHER_ALIGNE_SIZE 64 +#define CONFIG_BITBANGMII +#define CONFIG_BITBANGMII_MULTI + +#endif /* __GRPEACH_H */ |