diff options
30 files changed, 2 insertions, 2168 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 0bed390f0d..db31be9217 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -88,14 +88,6 @@ config TARGET_SCB9328 bool "Support scb9328" select CPU_ARM920T -config TARGET_CM4008 - bool "Support cm4008" - select CPU_ARM920T - -config TARGET_CM41XX - bool "Support cm41xx" - select CPU_ARM920T - config TARGET_VCMA9 bool "Support VCMA9" select CPU_ARM920T @@ -769,8 +761,6 @@ source "board/broadcom/bcm28155_ap/Kconfig" source "board/broadcom/bcmcygnus/Kconfig" source "board/broadcom/bcmnsp/Kconfig" source "board/cirrus/edb93xx/Kconfig" -source "board/cm4008/Kconfig" -source "board/cm41xx/Kconfig" source "board/compulab/cm_t335/Kconfig" source "board/compulab/cm_fx6/Kconfig" source "board/congatec/cgtqmx6eval/Kconfig" diff --git a/arch/arm/cpu/arm920t/Makefile b/arch/arm/cpu/arm920t/Makefile index a16838b479..29a350c9a6 100644 --- a/arch/arm/cpu/arm920t/Makefile +++ b/arch/arm/cpu/arm920t/Makefile @@ -13,5 +13,4 @@ obj-$(CONFIG_USE_IRQ) += interrupts.o obj-$(if $(filter a320,$(SOC)),y) += a320/ obj-$(CONFIG_EP93XX) += ep93xx/ obj-$(CONFIG_IMX) += imx/ -obj-$(CONFIG_KS8695) += ks8695/ obj-$(CONFIG_S3C24X0) += s3c24x0/ diff --git a/arch/arm/cpu/arm920t/ks8695/Makefile b/arch/arm/cpu/arm920t/ks8695/Makefile deleted file mode 100644 index 400aa89e99..0000000000 --- a/arch/arm/cpu/arm920t/ks8695/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = lowlevel_init.o -obj-y += timer.o diff --git a/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S b/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S deleted file mode 100644 index a2a07f2f23..0000000000 --- a/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S +++ /dev/null @@ -1,189 +0,0 @@ -/* - * lowlevel_init.S - basic hardware initialization for the KS8695 CPU - * - * Copyright (c) 2004-2005, Greg Ungerer <greg.ungerer@opengear.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> -#include <version.h> -#include <asm/arch/platform.h> - -#ifndef CONFIG_SKIP_LOWLEVEL_INIT - -/* - ************************************************************************* - * - * Handy dandy macros - * - ************************************************************************* - */ - -/* Delay a bit */ -.macro DELAY_FOR cycles, reg0 - ldr \reg0, =\cycles - subs \reg0, \reg0, #1 - subne pc, pc, #0xc -.endm - -/* - ************************************************************************* - * - * Some local storage. - * - ************************************************************************* - */ - -/* Should we boot with an interactive console or not */ -.globl serial_console - -/* - ************************************************************************* - * - * Raw hardware initialization code. The important thing is to get - * SDRAM setup and running. We do some other basic things here too, - * like getting the PLL set for high speed, and init the LEDs. - * - ************************************************************************* - */ - -.globl lowlevel_init -lowlevel_init: - -#if DEBUG - /* - * enable UART for early debug trace - */ - ldr r1, =(KS8695_IO_BASE+KS8695_UART_DIVISOR) - mov r2, #((25000000+CONFIG_BAUDRATE/2) / CONFIG_BAUDRATE) - str r2, [r1] - ldr r1, =(KS8695_IO_BASE+KS8695_UART_LINE_CTRL) - mov r2, #KS8695_UART_LINEC_WLEN8 - str r2, [r1] /* 8 data bits, no parity, 1 stop */ - ldr r1, =(KS8695_IO_BASE+KS8695_UART_TX_HOLDING) - mov r2, #0x41 - str r2, [r1] /* write 'A' */ -#endif -#if DEBUG - ldr r1, =(KS8695_IO_BASE+KS8695_UART_TX_HOLDING) - mov r2, #0x42 - str r2, [r1] -#endif - - /* - * remap the memory and flash regions. we want to end up with - * ram from address 0, and flash at 32MB. - */ - ldr r1, =(KS8695_IO_BASE+KS8695_MEM_CTRL0) - ldr r2, =0xbfc00040 - str r2, [r1] /* large flash map */ - ldr pc, =(highflash+0x02000000-0x00f00000) /* jump to high flash address */ -highflash: - ldr r2, =0x8fe00040 - str r2, [r1] /* remap flash range */ - - /* - * remap the second select region to the 4MB immediately after - * the first region. This way if you have a larger flash (say 8Mb) - * then you can have it all mapped nicely. Has no effect if you - * only have a 4Mb or smaller flash. - */ - ldr r1, =(KS8695_IO_BASE+KS8695_MEM_CTRL1) - ldr r2, =0x9fe40040 - str r2, [r1] /* remap flash2 region, contiguous */ - ldr r1, =(KS8695_IO_BASE+KS8695_MEM_GENERAL) - ldr r2, =0x30000005 - str r2, [r1] /* enable both flash selects */ - -#ifdef CONFIG_CM41xx - /* - * map the second flash chip, using the external IO lines. - */ - ldr r1, =(KS8695_IO_BASE+KS8695_IO_CTRL0) - ldr r2, =0xafe80b6d - str r2, [r1] /* remap io0 region, contiguous */ - ldr r1, =(KS8695_IO_BASE+KS8695_IO_CTRL1) - ldr r2, =0xbfec0b6d - str r2, [r1] /* remap io1 region, contiguous */ - ldr r1, =(KS8695_IO_BASE+KS8695_MEM_GENERAL) - ldr r2, =0x30050005 - str r2, [r1] /* enable second flash */ -#endif - - /* - * before relocating, we have to setup RAM timing - */ - ldr r1, =(KS8695_IO_BASE+KS8695_SDRAM_CTRL0) -#if (PHYS_SDRAM_1_SIZE == 0x02000000) - ldr r2, =0x7fc0000e /* 32MB */ -#else - ldr r2, =0x3fc0000e /* 16MB */ -#endif - str r2, [r1] /* configure sdram bank0 setup */ - ldr r1, =(KS8695_IO_BASE+KS8695_SDRAM_CTRL1) - mov r2, #0 - str r2, [r1] /* configure sdram bank1 setup */ - - ldr r1, =(KS8695_IO_BASE+KS8695_SDRAM_GENERAL) - ldr r2, =0x0000000a - str r2, [r1] /* set RAS/CAS timing */ - - ldr r1, =(KS8695_IO_BASE+KS8695_SDRAM_BUFFER) - ldr r2, =0x00030000 - str r2, [r1] /* send NOP command */ - DELAY_FOR 0x100, r0 - ldr r2, =0x00010000 - str r2, [r1] /* send PRECHARGE-ALL */ - DELAY_FOR 0x100, r0 - - ldr r1, =(KS8695_IO_BASE+KS8695_SDRAM_REFRESH) - ldr r2, =0x00000020 - str r2, [r1] /* set for fast refresh */ - DELAY_FOR 0x100, r0 - ldr r2, =0x00000190 - str r2, [r1] /* set normal refresh timing */ - - ldr r1, =(KS8695_IO_BASE+KS8695_SDRAM_BUFFER) - ldr r2, =0x00020033 - str r2, [r1] /* send mode command */ - DELAY_FOR 0x100, r0 - ldr r2, =0x01f00000 - str r2, [r1] /* enable sdram fifos */ - - /* - * set pll to top speed - */ - ldr r1, =(KS8695_IO_BASE+KS8695_SYSTEN_BUS_CLOCK) - mov r2, #0 - str r2, [r1] /* set pll clock to 166MHz */ - - ldr r1, =(KS8695_IO_BASE+KS8695_SWITCH_CTRL0) - ldr r2, [r1] /* Get switch ctrl0 register */ - and r2, r2, #0x0fc00000 /* Mask out LED control bits */ - orr r2, r2, #0x01800000 /* Set Link/activity/speed actions */ - str r2, [r1] - -#ifdef CONFIG_CM4008 - ldr r1, =(KS8695_IO_BASE+KS8695_GPIO_MODE) - ldr r2, =0x0000fe30 - str r2, [r1] /* enable LED's as outputs */ - ldr r1, =(KS8695_IO_BASE+KS8695_GPIO_DATA) - ldr r2, =0x0000fe20 - str r2, [r1] /* turn on power LED */ -#endif -#if defined(CONFIG_CM4008) || defined(CONFIG_CM41xx) - ldr r2, [r1] /* get current GPIO input data */ - tst r2, #0x8 /* check if "erase" depressed */ - beq nobutton - mov r2, #0 /* be quiet on boot, no console */ - ldr r1, =serial_console - str r2, [r1] -nobutton: -#endif - - add lr, lr, #0x02000000 /* flash is now mapped high */ - add ip, ip, #0x02000000 /* this is a hack */ - mov pc, lr /* all done, return */ - -#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ diff --git a/arch/arm/cpu/arm920t/ks8695/timer.c b/arch/arm/cpu/arm920t/ks8695/timer.c deleted file mode 100644 index 23db5572de..0000000000 --- a/arch/arm/cpu/arm920t/ks8695/timer.c +++ /dev/null @@ -1,77 +0,0 @@ -/* - * (C) Copyright 2004-2005, Greg Ungerer <greg.ungerer@opengear.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/arch/platform.h> - -/* - * Initial timer set constants. Nothing complicated, just set for a 1ms - * tick. - */ -#define TIMER_INTERVAL (TICKS_PER_uSEC * mSEC_1) -#define TIMER_COUNT (TIMER_INTERVAL / 2) -#define TIMER_PULSE TIMER_COUNT - -/* - * Handy KS8695 register access functions. - */ -#define ks8695_read(a) *((volatile ulong *) (KS8695_IO_BASE + (a))) -#define ks8695_write(a,v) *((volatile ulong *) (KS8695_IO_BASE + (a))) = (v) - -ulong timer_ticks; - -int timer_init (void) -{ - /* Set the hadware timer for 1ms */ - ks8695_write(KS8695_TIMER1, TIMER_COUNT); - ks8695_write(KS8695_TIMER1_PCOUNT, TIMER_PULSE); - ks8695_write(KS8695_TIMER_CTRL, 0x2); - timer_ticks = 0; - - return 0; -} - -ulong get_timer_masked(void) -{ - /* Check for timer wrap */ - if (ks8695_read(KS8695_INT_STATUS) & KS8695_INTMASK_TIMERINT1) { - /* Clear interrupt condition */ - ks8695_write(KS8695_INT_STATUS, KS8695_INTMASK_TIMERINT1); - timer_ticks++; - } - return timer_ticks; -} - -ulong get_timer(ulong base) -{ - return (get_timer_masked() - base); -} - -void __udelay(ulong usec) -{ - ulong start = get_timer_masked(); - ulong end; - - /* Only 1ms resolution :-( */ - end = usec / 1000; - while (get_timer(start) < end) - ; -} - -void reset_cpu (ulong ignored) -{ - ulong tc; - - /* Set timer0 to watchdog, and let it timeout */ - tc = ks8695_read(KS8695_TIMER_CTRL) & 0x2; - ks8695_write(KS8695_TIMER_CTRL, tc); - ks8695_write(KS8695_TIMER0, ((10 << 8) | 0xff)); - ks8695_write(KS8695_TIMER_CTRL, (tc | 0x1)); - - /* Should only wait here till watchdog resets */ - for (;;) - ; -} diff --git a/arch/arm/include/asm/arch-ks8695/platform.h b/arch/arm/include/asm/arch-ks8695/platform.h deleted file mode 100644 index 02f6049263..0000000000 --- a/arch/arm/include/asm/arch-ks8695/platform.h +++ /dev/null @@ -1,294 +0,0 @@ -/* - * SPDX-License-Identifier: GPL-2.0+ - */ -#ifndef __address_h -#define __address_h 1 - -#define KS8695_SDRAM_START 0x00000000 -#define KS8695_SDRAM_SIZE 0x01000000 -#define KS8695_MEM_SIZE KS8695_SDRAM_SIZE -#define KS8695_MEM_START KS8695_SDRAM_START - -#define KS8695_PCMCIA_IO_BASE 0x03800000 -#define KS8695_PCMCIA_IO_SIZE 0x00040000 - -#define KS8695_IO_BASE 0x03FF0000 -#define KS8695_IO_SIZE 0x00010000 - -#define KS8695_SYSTEN_CONFIG 0x00 -#define KS8695_SYSTEN_BUS_CLOCK 0x04 - -#define KS8695_FLASH_START 0x02800000 -#define KS8695_FLASH_SIZE 0x00400000 - -/*i/o control registers offset difinitions*/ -#define KS8695_IO_CTRL0 0x4000 -#define KS8695_IO_CTRL1 0x4004 -#define KS8695_IO_CTRL2 0x4008 -#define KS8695_IO_CTRL3 0x400C - -/*memory control registers offset difinitions*/ -#define KS8695_MEM_CTRL0 0x4010 -#define KS8695_MEM_CTRL1 0x4014 -#define KS8695_MEM_CTRL2 0x4018 -#define KS8695_MEM_CTRL3 0x401C -#define KS8695_MEM_GENERAL 0x4020 -#define KS8695_SDRAM_CTRL0 0x4030 -#define KS8695_SDRAM_CTRL1 0x4034 -#define KS8695_SDRAM_GENERAL 0x4038 -#define KS8695_SDRAM_BUFFER 0x403C -#define KS8695_SDRAM_REFRESH 0x4040 - -/*WAN control registers offset difinitions*/ -#define KS8695_WAN_DMA_TX 0x6000 -#define KS8695_WAN_DMA_RX 0x6004 -#define KS8695_WAN_DMA_TX_START 0x6008 -#define KS8695_WAN_DMA_RX_START 0x600C -#define KS8695_WAN_TX_LIST 0x6010 -#define KS8695_WAN_RX_LIST 0x6014 -#define KS8695_WAN_MAC_LOW 0x6018 -#define KS8695_WAN_MAC_HIGH 0x601C -#define KS8695_WAN_MAC_ELOW 0x6080 -#define KS8695_WAN_MAC_EHIGH 0x6084 - -/*LAN control registers offset difinitions*/ -#define KS8695_LAN_DMA_TX 0x8000 -#define KS8695_LAN_DMA_RX 0x8004 -#define KS8695_LAN_DMA_TX_START 0x8008 -#define KS8695_LAN_DMA_RX_START 0x800C -#define KS8695_LAN_TX_LIST 0x8010 -#define KS8695_LAN_RX_LIST 0x8014 -#define KS8695_LAN_MAC_LOW 0x8018 -#define KS8695_LAN_MAC_HIGH 0x801C -#define KS8695_LAN_MAC_ELOW 0X8080 -#define KS8695_LAN_MAC_EHIGH 0X8084 - -/*HPNA control registers offset difinitions*/ -#define KS8695_HPNA_DMA_TX 0xA000 -#define KS8695_HPNA_DMA_RX 0xA004 -#define KS8695_HPNA_DMA_TX_START 0xA008 -#define KS8695_HPNA_DMA_RX_START 0xA00C -#define KS8695_HPNA_TX_LIST 0xA010 -#define KS8695_HPNA_RX_LIST 0xA014 -#define KS8695_HPNA_MAC_LOW 0xA018 -#define KS8695_HPNA_MAC_HIGH 0xA01C -#define KS8695_HPNA_MAC_ELOW 0xA080 -#define KS8695_HPNA_MAC_EHIGH 0xA084 - -/*UART control registers offset difinitions*/ -#define KS8695_UART_RX_BUFFER 0xE000 -#define KS8695_UART_TX_HOLDING 0xE004 - -#define KS8695_UART_FIFO_CTRL 0xE008 -#define KS8695_UART_FIFO_TRIG01 0x00 -#define KS8695_UART_FIFO_TRIG04 0x80 -#define KS8695_UART_FIFO_TXRST 0x03 -#define KS8695_UART_FIFO_RXRST 0x02 -#define KS8695_UART_FIFO_FEN 0x01 - -#define KS8695_UART_LINE_CTRL 0xE00C -#define KS8695_UART_LINEC_BRK 0x40 -#define KS8695_UART_LINEC_EPS 0x10 -#define KS8695_UART_LINEC_PEN 0x08 -#define KS8695_UART_LINEC_STP2 0x04 -#define KS8695_UART_LINEC_WLEN8 0x03 -#define KS8695_UART_LINEC_WLEN7 0x02 -#define KS8695_UART_LINEC_WLEN6 0x01 -#define KS8695_UART_LINEC_WLEN5 0x00 - -#define KS8695_UART_MODEM_CTRL 0xE010 -#define KS8695_UART_MODEMC_RTS 0x02 -#define KS8695_UART_MODEMC_DTR 0x01 - -#define KS8695_UART_LINE_STATUS 0xE014 -#define KS8695_UART_LINES_TXFE 0x20 -#define KS8695_UART_LINES_BE 0x10 -#define KS8695_UART_LINES_FE 0x08 -#define KS8695_UART_LINES_PE 0x04 -#define KS8695_UART_LINES_OE 0x02 -#define KS8695_UART_LINES_RXFE 0x01 -#define KS8695_UART_LINES_ANY (KS8695_UART_LINES_OE|KS8695_UART_LINES_BE|KS8695_UART_LINES_PE|KS8695_UART_LINES_FE) - -#define KS8695_UART_MODEM_STATUS 0xE018 -#define KS8695_UART_MODEM_DCD 0x80 -#define KS8695_UART_MODEM_DSR 0x20 -#define KS8695_UART_MODEM_CTS 0x10 -#define KS8695_UART_MODEM_DDCD 0x08 -#define KS8695_UART_MODEM_DDSR 0x02 -#define KS8695_UART_MODEM_DCTS 0x01 -#define UART8695_MODEM_ANY 0xFF - -#define KS8695_UART_DIVISOR 0xE01C -#define KS8695_UART_STATUS 0xE020 - -/*Interrupt controlller registers offset difinitions*/ -#define KS8695_INT_CONTL 0xE200 -#define KS8695_INT_ENABLE 0xE204 -#define KS8695_INT_ENABLE_MODEM 0x0800 -#define KS8695_INT_ENABLE_ERR 0x0400 -#define KS8695_INT_ENABLE_RX 0x0200 -#define KS8695_INT_ENABLE_TX 0x0100 - -#define KS8695_INT_STATUS 0xE208 -#define KS8695_INT_WAN_PRIORITY 0xE20C -#define KS8695_INT_HPNA_PRIORITY 0xE210 -#define KS8695_INT_LAN_PRIORITY 0xE214 -#define KS8695_INT_TIMER_PRIORITY 0xE218 -#define KS8695_INT_UART_PRIORITY 0xE21C -#define KS8695_INT_EXT_PRIORITY 0xE220 -#define KS8695_INT_CHAN_PRIORITY 0xE224 -#define KS8695_INT_BUSERROR_PRO 0xE228 -#define KS8695_INT_MASK_STATUS 0xE22C -#define KS8695_FIQ_PEND_PRIORITY 0xE230 -#define KS8695_IRQ_PEND_PRIORITY 0xE234 - -/*timer registers offset difinitions*/ -#define KS8695_TIMER_CTRL 0xE400 -#define KS8695_TIMER1 0xE404 -#define KS8695_TIMER0 0xE408 -#define KS8695_TIMER1_PCOUNT 0xE40C -#define KS8695_TIMER0_PCOUNT 0xE410 - -/*GPIO registers offset difinitions*/ -#define KS8695_GPIO_MODE 0xE600 -#define KS8695_GPIO_CTRL 0xE604 -#define KS8695_GPIO_DATA 0xE608 - -/*SWITCH registers offset difinitions*/ -#define KS8695_SWITCH_CTRL0 0xE800 -#define KS8695_SWITCH_CTRL1 0xE804 -#define KS8695_SWITCH_PORT1 0xE808 -#define KS8695_SWITCH_PORT2 0xE80C -#define KS8695_SWITCH_PORT3 0xE810 -#define KS8695_SWITCH_PORT4 0xE814 -#define KS8695_SWITCH_PORT5 0xE818 -#define KS8695_SWITCH_AUTO0 0xE81C -#define KS8695_SWITCH_AUTO1 0xE820 -#define KS8695_SWITCH_LUE_CTRL 0xE824 -#define KS8695_SWITCH_LUE_HIGH 0xE828 -#define KS8695_SWITCH_LUE_LOW 0xE82C -#define KS8695_SWITCH_ADVANCED 0xE830 - -#define KS8695_SWITCH_LPPM12 0xE874 -#define KS8695_SWITCH_LPPM34 0xE878 - -/*host communication registers difinitions*/ -#define KS8695_DSCP_HIGH 0xE834 -#define KS8695_DSCP_LOW 0xE838 -#define KS8695_SWITCH_MAC_HIGH 0xE83C -#define KS8695_SWITCH_MAC_LOW 0xE840 - -/*miscellaneours registers difinitions*/ -#define KS8695_MANAGE_COUNTER 0xE844 -#define KS8695_MANAGE_DATA 0xE848 -#define KS8695_LAN12_POWERMAGR 0xE84C -#define KS8695_LAN34_POWERMAGR 0xE850 - -#define KS8695_DEVICE_ID 0xEA00 -#define KS8695_REVISION_ID 0xEA04 - -#define KS8695_MISC_CONTROL 0xEA08 -#define KS8695_WAN_CONTROL 0xEA0C -#define KS8695_WAN_POWERMAGR 0xEA10 -#define KS8695_WAN_PHY_CONTROL 0xEA14 -#define KS8695_WAN_PHY_STATUS 0xEA18 - -/* bus clock definitions*/ -#define KS8695_BUS_CLOCK_125MHZ 0x0 -#define KS8695_BUS_CLOCK_100MHZ 0x1 -#define KS8695_BUS_CLOCK_62MHZ 0x2 -#define KS8695_BUS_CLOCK_50MHZ 0x3 -#define KS8695_BUS_CLOCK_41MHZ 0x4 -#define KS8695_BUS_CLOCK_33MHZ 0x5 -#define KS8695_BUS_CLOCK_31MHZ 0x6 -#define KS8695_BUS_CLOCK_25MHZ 0x7 - -/* ------------------------------------------------------------------------------- - * definations for IRQ - * -------------------------------------------------------------------------------*/ - -#define KS8695_INT_EXT_INT0 2 -#define KS8695_INT_EXT_INT1 3 -#define KS8695_INT_EXT_INT2 4 -#define KS8695_INT_EXT_INT3 5 -#define KS8695_INT_TIMERINT0 6 -#define KS8695_INT_TIMERINT1 7 -#define KS8695_INT_UART_TX 8 -#define KS8695_INT_UART_RX 9 -#define KS8695_INT_UART_LINE_ERR 10 -#define KS8695_INT_UART_MODEMS 11 -#define KS8695_INT_LAN_STOP_RX 12 -#define KS8695_INT_LAN_STOP_TX 13 -#define KS8695_INT_LAN_BUF_RX_STATUS 14 -#define KS8695_INT_LAN_BUF_TX_STATUS 15 -#define KS8695_INT_LAN_RX_STATUS 16 -#define KS8695_INT_LAN_TX_STATUS 17 -#define KS8695_INT_HPAN_STOP_RX 18 -#define KS8695_INT_HPNA_STOP_TX 19 -#define KS8695_INT_HPNA_BUF_RX_STATUS 20 -#define KS8695_INT_HPNA_BUF_TX_STATUS 21 -#define KS8695_INT_HPNA_RX_STATUS 22 -#define KS8695_INT_HPNA_TX_STATUS 23 -#define KS8695_INT_BUS_ERROR 24 -#define KS8695_INT_WAN_STOP_RX 25 -#define KS8695_INT_WAN_STOP_TX 26 -#define KS8695_INT_WAN_BUF_RX_STATUS 27 -#define KS8695_INT_WAN_BUF_TX_STATUS 28 -#define KS8695_INT_WAN_RX_STATUS 29 -#define KS8695_INT_WAN_TX_STATUS 30 - -#define KS8695_INT_UART KS8695_INT_UART_TX - -/* ------------------------------------------------------------------------------- - * Interrupt bit positions - * - * ------------------------------------------------------------------------------- - */ - -#define KS8695_INTMASK_EXT_INT0 ( 1 << KS8695_INT_EXT_INT0 ) -#define KS8695_INTMASK_EXT_INT1 ( 1 << KS8695_INT_EXT_INT1 ) -#define KS8695_INTMASK_EXT_INT2 ( 1 << KS8695_INT_EXT_INT2 ) -#define KS8695_INTMASK_EXT_INT3 ( 1 << KS8695_INT_EXT_INT3 ) -#define KS8695_INTMASK_TIMERINT0 ( 1 << KS8695_INT_TIMERINT0 ) -#define KS8695_INTMASK_TIMERINT1 ( 1 << KS8695_INT_TIMERINT1 ) -#define KS8695_INTMASK_UART_TX ( 1 << KS8695_INT_UART_TX ) -#define KS8695_INTMASK_UART_RX ( 1 << KS8695_INT_UART_RX ) -#define KS8695_INTMASK_UART_LINE_ERR ( 1 << KS8695_INT_UART_LINE_ERR ) -#define KS8695_INTMASK_UART_MODEMS ( 1 << KS8695_INT_UART_MODEMS ) -#define KS8695_INTMASK_LAN_STOP_RX ( 1 << KS8695_INT_LAN_STOP_RX ) -#define KS8695_INTMASK_LAN_STOP_TX ( 1 << KS8695_INT_LAN_STOP_TX ) -#define KS8695_INTMASK_LAN_BUF_RX_STATUS ( 1 << KS8695_INT_LAN_BUF_RX_STATUS ) -#define KS8695_INTMASK_LAN_BUF_TX_STATUS ( 1 << KS8695_INT_LAN_BUF_TX_STATUS ) -#define KS8695_INTMASK_LAN_RX_STATUS ( 1 << KS8695_INT_LAN_RX_STATUS ) -#define KS8695_INTMASK_LAN_TX_STATUS ( 1 << KS8695_INT_LAN_RX_STATUS ) -#define KS8695_INTMASK_HPAN_STOP_RX ( 1 << KS8695_INT_HPAN_STOP_RX ) -#define KS8695_INTMASK_HPNA_STOP_TX ( 1 << KS8695_INT_HPNA_STOP_TX ) -#define KS8695_INTMASK_HPNA_BUF_RX_STATUS ( 1 << KS8695_INT_HPNA_BUF_RX_STATUS ) -#define KS8695_INTMAKS_HPNA_BUF_TX_STATUS ( 1 << KS8695_INT_HPNA_BUF_TX_STATUS -#define KS8695_INTMASK_HPNA_RX_STATUS ( 1 << KS8695_INT_HPNA_RX_STATUS ) -#define KS8695_INTMASK_HPNA_TX_STATUS ( 1 << KS8695_INT_HPNA_TX_STATUS ) -#define KS8695_INTMASK_BUS_ERROR ( 1 << KS8695_INT_BUS_ERROR ) -#define KS8695_INTMASK_WAN_STOP_RX ( 1 << KS8695_INT_WAN_STOP_RX ) -#define KS8695_INTMASK_WAN_STOP_TX ( 1 << KS8695_INT_WAN_STOP_TX ) -#define KS8695_INTMASK_WAN_BUF_RX_STATUS ( 1 << KS8695_INT_WAN_BUF_RX_STATUS ) -#define KS8695_INTMASK_WAN_BUF_TX_STATUS ( 1 << KS8695_INT_WAN_BUF_TX_STATUS ) -#define KS8695_INTMASK_WAN_RX_STATUS ( 1 << KS8695_INT_WAN_RX_STATUS ) -#define KS8695_INTMASK_WAN_TX_STATUS ( 1 << KS8695_INT_WAN_TX_STATUS ) - -#define KS8695_SC_VALID_INT 0xFFFFFFFF -#define MAXIRQNUM 31 - -/* - * Timer definitions - * - * Use timer 1 & 2 - * (both run at 25MHz). - * - */ -#define TICKS_PER_uSEC 25 -#define mSEC_1 1000 -#define mSEC_10 (mSEC_1 * 10) - -#endif - -/* END */ diff --git a/board/cm4008/Kconfig b/board/cm4008/Kconfig deleted file mode 100644 index de87d5bc12..0000000000 --- a/board/cm4008/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_CM4008 - -config SYS_BOARD - default "cm4008" - -config SYS_SOC - default "ks8695" - -config SYS_CONFIG_NAME - default "cm4008" - -endif diff --git a/board/cm4008/MAINTAINERS b/board/cm4008/MAINTAINERS deleted file mode 100644 index 5f08bc3b5c..0000000000 --- a/board/cm4008/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -CM4008 BOARD -M: Greg Ungerer <greg.ungerer@opengear.com> -S: Maintained -F: board/cm4008/ -F: include/configs/cm4008.h -F: configs/cm4008_defconfig diff --git a/board/cm4008/Makefile b/board/cm4008/Makefile deleted file mode 100644 index 04b152917b..0000000000 --- a/board/cm4008/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := cm4008.o flash.o diff --git a/board/cm4008/cm4008.c b/board/cm4008/cm4008.c deleted file mode 100644 index 740e16443e..0000000000 --- a/board/cm4008/cm4008.c +++ /dev/null @@ -1,88 +0,0 @@ -/* - * (C) Copyright 2005 - * Greg Ungerer, OpenGear Inc, <greg.ungerer@opengear.com> - * - * (C) Copyright 2002 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/arch/platform.h> -#include <netdev.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* ------------------------------------------------------------------------- */ - -#define ks8695_read(a) *((volatile unsigned int *) (KS8695_IO_BASE+(a))) -#define ks8695_write(a,b) *((volatile unsigned int *) (KS8695_IO_BASE+(a))) = (b) - -/* ------------------------------------------------------------------------- */ - - -/* - * Miscelaneous platform dependent initialisations - */ -int env_flash_cmdline (void) -{ - char *sp = (char *) 0x0201c020; - char *ep; - int len; - - /* Check if "erase" push button is depressed */ - if ((ks8695_read(KS8695_GPIO_DATA) & 0x8) == 0) { - printf("### Entering network recovery mode...\n"); - setenv("bootargs", "console=ttyAM0,115200 mem=16M initrd=0x400000,6M root=/dev/ram0"); - setenv("bootcmd", "bootp 0x400000; gofsk 0x400000"); - setenv("bootdelay", "2"); - return 0; - } - - /* Check for flash based kernel boot args to use as default */ - for (ep = sp, len = 0; ((len < 1024) && (*ep != 0)); ep++, len++) - ; - - if ((len > 0) && (len <1024)) - setenv("bootargs", sp); - - return 0; -} - -int board_late_init (void) -{ - return 0; -} - -int board_eth_init(bd_t *bis) -{ - return ks8695_eth_initialize(); -} - -int board_init (void) -{ - /* arch number of CM4008 */ - gd->bd->bi_arch_number = 624; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0x00000100; - - /* power down all but port 0 on the switch */ - ks8695_write(KS8695_SWITCH_LPPM12, 0x00000005); - ks8695_write(KS8695_SWITCH_LPPM34, 0x00050005); - - return 0; -} - -int dram_init (void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - - return (0); -} diff --git a/board/cm4008/config.mk b/board/cm4008/config.mk deleted file mode 100644 index 0d5923b941..0000000000 --- a/board/cm4008/config.mk +++ /dev/null @@ -1 +0,0 @@ -CONFIG_SYS_TEXT_BASE = 0x00f00000 diff --git a/board/cm4008/flash.c b/board/cm4008/flash.c deleted file mode 100644 index 8315a57ed9..0000000000 --- a/board/cm4008/flash.c +++ /dev/null @@ -1,395 +0,0 @@ -/* - * (C) Copyright 2005 - * Greg Ungerer, OpenGear Inc, greg.ungerer@opengear.com - * - * (C) Copyright 2001 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <linux/byteorder/swab.h> -#include <asm/sections.h> - - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -#define mb() __asm__ __volatile__ ("" : : : "memory") - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size (unsigned char * addr, flash_info_t * info); -static int write_data (flash_info_t * info, ulong dest, unsigned char data); -static void flash_get_offsets (ulong base, flash_info_t * info); -void inline spin_wheel (void); - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init (void) -{ - int i; - ulong size = 0; - - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { - switch (i) { - case 0: - flash_get_size ((unsigned char *) PHYS_FLASH_1, &flash_info[i]); - flash_get_offsets (PHYS_FLASH_1, &flash_info[i]); - break; - case 1: - /* ignore for now */ - flash_info[i].flash_id = FLASH_UNKNOWN; - break; - default: - panic ("configured too many flash banks!\n"); - break; - } - size += flash_info[i].size; - } - - /* Protect monitor and environment sectors - */ - flash_protect (FLAG_PROTECT_SET, - CONFIG_SYS_FLASH_BASE, - CONFIG_SYS_FLASH_BASE + (__bss_end - __bss_start), - &flash_info[0]); - - return size; -} - -/*----------------------------------------------------------------------- - */ -static void flash_get_offsets (ulong base, flash_info_t * info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) - return; - - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) { - for (i = 0; i < info->sector_count; i++) { - info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE); - info->protect[i] = 0; - } - } -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t * info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_INTEL: - printf ("INTEL "); - break; - default: - printf ("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_28F128J3A: - printf ("28F128J3A\n"); - break; - default: - printf ("Unknown Chip Type\n"); - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; ++i) { - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s", - info->start[i], info->protect[i] ? " (RO)" : " "); - } - printf ("\n"); - return; -} - -/* - * The following code cannot be run from FLASH! - */ -static ulong flash_get_size (unsigned char * addr, flash_info_t * info) -{ - volatile unsigned char value; - - /* Write auto select command: read Manufacturer ID */ - addr[0x5555] = 0xAA; - addr[0x2AAA] = 0x55; - addr[0x5555] = 0x90; - - mb (); - value = addr[0]; - - switch (value) { - - case (unsigned char)INTEL_MANUFACT: - info->flash_id = FLASH_MAN_INTEL; - break; - - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - addr[0] = 0xFF; /* restore read mode */ - return (0); /* no or unknown flash */ - } - - mb (); - value = addr[2]; /* device ID */ - - switch (value) { - - case (unsigned char)INTEL_ID_28F640J3A: - info->flash_id += FLASH_28F640J3A; - info->sector_count = 64; - info->size = 0x00800000; - break; /* => 8 MB */ - - case (unsigned char)INTEL_ID_28F128J3A: - info->flash_id += FLASH_28F128J3A; - info->sector_count = 128; - info->size = 0x01000000; - break; /* => 16 MB */ - - default: - info->flash_id = FLASH_UNKNOWN; - break; - } - - if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) { - printf ("** ERROR: sector count %d > max (%d) **\n", - info->sector_count, CONFIG_SYS_MAX_FLASH_SECT); - info->sector_count = CONFIG_SYS_MAX_FLASH_SECT; - } - - addr[0] = 0xFF; /* restore read mode */ - - return (info->size); -} - - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t * info, int s_first, int s_last) -{ - int prot, sect; - ulong type; - int rcode = 0; - ulong start; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - type = (info->flash_id & FLASH_VENDMASK); - if ((type != FLASH_MAN_INTEL)) { - printf ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) - printf ("- Warning: %d protected sectors will not be erased!\n", prot); - else - printf ("\n"); - - /* Disable interrupts which might cause a timeout here */ - disable_interrupts(); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - volatile unsigned char *addr; - unsigned char status; - - printf ("Erasing sector %2d ... ", sect); - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - addr = (volatile unsigned char *) (info->start[sect]); - *addr = 0x50; /* clear status register */ - *addr = 0x20; /* erase setup */ - *addr = 0xD0; /* erase confirm */ - - while (((status = *addr) & 0x80) != 0x80) { - if (get_timer(start) > - CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - *addr = 0xB0; /* suspend erase */ - *addr = 0xFF; /* reset to read mode */ - rcode = 1; - break; - } - } - - *addr = 0x50; /* clear status register cmd */ - *addr = 0xFF; /* resest to read mode */ - - printf (" done\n"); - } - } - return rcode; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - * 4 - Flash not identified - */ - -int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - ulong cp, wp; - unsigned char data; - int count, i, l, rc, port_width; - - if (info->flash_id == FLASH_UNKNOWN) - return 4; - - wp = addr; - port_width = 1; - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i = 0, cp = wp; i < l; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - for (; i < port_width && cnt > 0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt == 0 && i < port_width; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - - if ((rc = write_data (info, wp, data)) != 0) { - return (rc); - } - wp += port_width; - } - - /* - * handle word aligned part - */ - count = 0; - while (cnt >= port_width) { - data = 0; - for (i = 0; i < port_width; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_data (info, wp, data)) != 0) { - return (rc); - } - wp += port_width; - cnt -= port_width; - if (count++ > 0x800) { - spin_wheel (); - count = 0; - } - } - - if (cnt == 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i < port_width; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - - return (write_data (info, wp, data)); -} - -/*----------------------------------------------------------------------- - * Write a word or halfword to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_data (flash_info_t * info, ulong dest, unsigned char data) -{ - volatile unsigned char *addr = (volatile unsigned char *) dest; - ulong status; - ulong start; - - /* Check if Flash is (sufficiently) erased */ - if ((*addr & data) != data) { - printf ("not erased at %08lx (%lx)\n", (ulong) addr, - (ulong) * addr); - return (2); - } - /* Disable interrupts which might cause a timeout here */ - disable_interrupts(); - - *addr = 0x40; /* write setup */ - *addr = data; - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - /* wait while polling the status register */ - while (((status = *addr) & 0x80) != 0x80) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - *addr = 0xFF; /* restore read mode */ - return (1); - } - } - - *addr = 0xFF; /* restore read mode */ - - return (0); -} - -void inline spin_wheel (void) -{ - static int p = 0; - static char w[] = "\\/-"; - - printf ("\010%c", w[p]); - (++p == 3) ? (p = 0) : 0; -} diff --git a/board/cm41xx/Kconfig b/board/cm41xx/Kconfig deleted file mode 100644 index 99e675b12d..0000000000 --- a/board/cm41xx/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_CM41XX - -config SYS_BOARD - default "cm41xx" - -config SYS_SOC - default "ks8695" - -config SYS_CONFIG_NAME - default "cm41xx" - -endif diff --git a/board/cm41xx/MAINTAINERS b/board/cm41xx/MAINTAINERS deleted file mode 100644 index f10eeb58f3..0000000000 --- a/board/cm41xx/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -CM41XX BOARD -#M: - -S: Maintained -F: board/cm41xx/ -F: include/configs/cm41xx.h -F: configs/cm41xx_defconfig diff --git a/board/cm41xx/Makefile b/board/cm41xx/Makefile deleted file mode 100644 index b71ea05566..0000000000 --- a/board/cm41xx/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := cm41xx.o flash.o diff --git a/board/cm41xx/cm41xx.c b/board/cm41xx/cm41xx.c deleted file mode 100644 index eabad48a3c..0000000000 --- a/board/cm41xx/cm41xx.c +++ /dev/null @@ -1,88 +0,0 @@ -/* - * (C) Copyright 2005 - * Greg Ungerer, OpenGear Inc, <greg.ungerer@opengear.com> - * - * (C) Copyright 2002 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/arch/platform.h> -#include <netdev.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* ------------------------------------------------------------------------- */ - -#define ks8695_read(a) *((volatile unsigned int *) (KS8695_IO_BASE+(a))) -#define ks8695_write(a,b) *((volatile unsigned int *) (KS8695_IO_BASE+(a))) = (b) - -/* ------------------------------------------------------------------------- */ - - -/* - * Miscelaneous platform dependent initialisations - */ -int env_flash_cmdline (void) -{ - char *sp = (char *) 0x0201c020; - char *ep; - int len; - - /* Check if "erase" push button is depressed */ - if ((ks8695_read(KS8695_GPIO_DATA) & 0x8) == 0) { - printf("### Entering network recovery mode...\n"); - setenv("bootargs", "console=ttyAM0,115200 mem=32M initrd=0x400000,8M root=/dev/ram0"); - setenv("bootcmd", "bootp 0x400000; gofsk 0x400000"); - setenv("bootdelay", "2"); - return 0; - } - - /* Check for flash based kernel boot args to use as default */ - for (ep = sp, len = 0; ((len < 1024) && (*ep != 0)); ep++, len++) - ; - - if ((len > 0) && (len <1024)) - setenv("bootargs", sp); - - return 0; -} - -int board_late_init (void) -{ - return 0; -} - -int board_eth_init(bd_t *bis) -{ - return ks8695_eth_initialize(); -} - -int board_init (void) -{ - /* arch number of CM41xx */ - gd->bd->bi_arch_number = 672; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0x00000100; - - /* power down all but port 0 on the switch */ - ks8695_write(KS8695_SWITCH_LPPM12, 0x00000005); - ks8695_write(KS8695_SWITCH_LPPM34, 0x00050005); - - return 0; -} - -int dram_init (void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - - return (0); -} diff --git a/board/cm41xx/config.mk b/board/cm41xx/config.mk deleted file mode 100644 index 0d5923b941..0000000000 --- a/board/cm41xx/config.mk +++ /dev/null @@ -1 +0,0 @@ -CONFIG_SYS_TEXT_BASE = 0x00f00000 diff --git a/board/cm41xx/flash.c b/board/cm41xx/flash.c deleted file mode 100644 index 8315a57ed9..0000000000 --- a/board/cm41xx/flash.c +++ /dev/null @@ -1,395 +0,0 @@ -/* - * (C) Copyright 2005 - * Greg Ungerer, OpenGear Inc, greg.ungerer@opengear.com - * - * (C) Copyright 2001 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <linux/byteorder/swab.h> -#include <asm/sections.h> - - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -#define mb() __asm__ __volatile__ ("" : : : "memory") - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size (unsigned char * addr, flash_info_t * info); -static int write_data (flash_info_t * info, ulong dest, unsigned char data); -static void flash_get_offsets (ulong base, flash_info_t * info); -void inline spin_wheel (void); - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init (void) -{ - int i; - ulong size = 0; - - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { - switch (i) { - case 0: - flash_get_size ((unsigned char *) PHYS_FLASH_1, &flash_info[i]); - flash_get_offsets (PHYS_FLASH_1, &flash_info[i]); - break; - case 1: - /* ignore for now */ - flash_info[i].flash_id = FLASH_UNKNOWN; - break; - default: - panic ("configured too many flash banks!\n"); - break; - } - size += flash_info[i].size; - } - - /* Protect monitor and environment sectors - */ - flash_protect (FLAG_PROTECT_SET, - CONFIG_SYS_FLASH_BASE, - CONFIG_SYS_FLASH_BASE + (__bss_end - __bss_start), - &flash_info[0]); - - return size; -} - -/*----------------------------------------------------------------------- - */ -static void flash_get_offsets (ulong base, flash_info_t * info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) - return; - - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) { - for (i = 0; i < info->sector_count; i++) { - info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE); - info->protect[i] = 0; - } - } -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t * info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_INTEL: - printf ("INTEL "); - break; - default: - printf ("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_28F128J3A: - printf ("28F128J3A\n"); - break; - default: - printf ("Unknown Chip Type\n"); - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; ++i) { - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s", - info->start[i], info->protect[i] ? " (RO)" : " "); - } - printf ("\n"); - return; -} - -/* - * The following code cannot be run from FLASH! - */ -static ulong flash_get_size (unsigned char * addr, flash_info_t * info) -{ - volatile unsigned char value; - - /* Write auto select command: read Manufacturer ID */ - addr[0x5555] = 0xAA; - addr[0x2AAA] = 0x55; - addr[0x5555] = 0x90; - - mb (); - value = addr[0]; - - switch (value) { - - case (unsigned char)INTEL_MANUFACT: - info->flash_id = FLASH_MAN_INTEL; - break; - - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - addr[0] = 0xFF; /* restore read mode */ - return (0); /* no or unknown flash */ - } - - mb (); - value = addr[2]; /* device ID */ - - switch (value) { - - case (unsigned char)INTEL_ID_28F640J3A: - info->flash_id += FLASH_28F640J3A; - info->sector_count = 64; - info->size = 0x00800000; - break; /* => 8 MB */ - - case (unsigned char)INTEL_ID_28F128J3A: - info->flash_id += FLASH_28F128J3A; - info->sector_count = 128; - info->size = 0x01000000; - break; /* => 16 MB */ - - default: - info->flash_id = FLASH_UNKNOWN; - break; - } - - if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) { - printf ("** ERROR: sector count %d > max (%d) **\n", - info->sector_count, CONFIG_SYS_MAX_FLASH_SECT); - info->sector_count = CONFIG_SYS_MAX_FLASH_SECT; - } - - addr[0] = 0xFF; /* restore read mode */ - - return (info->size); -} - - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t * info, int s_first, int s_last) -{ - int prot, sect; - ulong type; - int rcode = 0; - ulong start; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - type = (info->flash_id & FLASH_VENDMASK); - if ((type != FLASH_MAN_INTEL)) { - printf ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) - printf ("- Warning: %d protected sectors will not be erased!\n", prot); - else - printf ("\n"); - - /* Disable interrupts which might cause a timeout here */ - disable_interrupts(); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - volatile unsigned char *addr; - unsigned char status; - - printf ("Erasing sector %2d ... ", sect); - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - addr = (volatile unsigned char *) (info->start[sect]); - *addr = 0x50; /* clear status register */ - *addr = 0x20; /* erase setup */ - *addr = 0xD0; /* erase confirm */ - - while (((status = *addr) & 0x80) != 0x80) { - if (get_timer(start) > - CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - *addr = 0xB0; /* suspend erase */ - *addr = 0xFF; /* reset to read mode */ - rcode = 1; - break; - } - } - - *addr = 0x50; /* clear status register cmd */ - *addr = 0xFF; /* resest to read mode */ - - printf (" done\n"); - } - } - return rcode; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - * 4 - Flash not identified - */ - -int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - ulong cp, wp; - unsigned char data; - int count, i, l, rc, port_width; - - if (info->flash_id == FLASH_UNKNOWN) - return 4; - - wp = addr; - port_width = 1; - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i = 0, cp = wp; i < l; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - for (; i < port_width && cnt > 0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt == 0 && i < port_width; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - - if ((rc = write_data (info, wp, data)) != 0) { - return (rc); - } - wp += port_width; - } - - /* - * handle word aligned part - */ - count = 0; - while (cnt >= port_width) { - data = 0; - for (i = 0; i < port_width; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_data (info, wp, data)) != 0) { - return (rc); - } - wp += port_width; - cnt -= port_width; - if (count++ > 0x800) { - spin_wheel (); - count = 0; - } - } - - if (cnt == 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i < port_width; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - - return (write_data (info, wp, data)); -} - -/*----------------------------------------------------------------------- - * Write a word or halfword to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_data (flash_info_t * info, ulong dest, unsigned char data) -{ - volatile unsigned char *addr = (volatile unsigned char *) dest; - ulong status; - ulong start; - - /* Check if Flash is (sufficiently) erased */ - if ((*addr & data) != data) { - printf ("not erased at %08lx (%lx)\n", (ulong) addr, - (ulong) * addr); - return (2); - } - /* Disable interrupts which might cause a timeout here */ - disable_interrupts(); - - *addr = 0x40; /* write setup */ - *addr = data; - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - /* wait while polling the status register */ - while (((status = *addr) & 0x80) != 0x80) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - *addr = 0xFF; /* restore read mode */ - return (1); - } - } - - *addr = 0xFF; /* restore read mode */ - - return (0); -} - -void inline spin_wheel (void) -{ - static int p = 0; - static char w[] = "\\/-"; - - printf ("\010%c", w[p]); - (++p == 3) ? (p = 0) : 0; -} diff --git a/configs/cm4008_defconfig b/configs/cm4008_defconfig deleted file mode 100644 index 487589d4a3..0000000000 --- a/configs/cm4008_defconfig +++ /dev/null @@ -1,2 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_CM4008=y diff --git a/configs/cm41xx_defconfig b/configs/cm41xx_defconfig deleted file mode 100644 index 15e9362397..0000000000 --- a/configs/cm41xx_defconfig +++ /dev/null @@ -1,2 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_CM41XX=y diff --git a/doc/README.scrapyard b/doc/README.scrapyard index d206251d7f..aa9ed41db5 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -12,6 +12,8 @@ The list should be sorted in reverse chronological order. Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +cm4008 arm arm920t - - Greg Ungerer <greg.ungerer@opengear.com> +cm41xx arm arm920t - - dkb arm arm926ejs - - Lei Wen <leiwen@marvell.com> jadecpu arm arm926ejs - - Matthias Weisser <weisserm@arcor.de> icecube_5200 powerpc mpc5xxx 37b608a5 2015-01-23 Wolfgang Denk <wd@denx.de> diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 46c4ac697d..da5e2bc3ab 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -33,7 +33,6 @@ obj-$(CONFIG_FTMAC110) += ftmac110.o obj-$(CONFIG_FTMAC100) += ftmac100.o obj-$(CONFIG_GRETH) += greth.o obj-$(CONFIG_DRIVER_TI_KEYSTONE_NET) += keystone_net.o -obj-$(CONFIG_DRIVER_KS8695ETH) += ks8695eth.o obj-$(CONFIG_KS8851_MLL) += ks8851_mll.o obj-$(CONFIG_LAN91C96) += lan91c96.o obj-$(CONFIG_MACB) += macb.o diff --git a/drivers/net/ks8695eth.c b/drivers/net/ks8695eth.c deleted file mode 100644 index b4822e9504..0000000000 --- a/drivers/net/ks8695eth.c +++ /dev/null @@ -1,229 +0,0 @@ -/* - * ks8695eth.c -- KS8695 ethernet driver - * - * (C) Copyright 2004-2005, Greg Ungerer <greg.ungerer@opengear.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/****************************************************************************/ - -#include <common.h> -#include <malloc.h> -#include <net.h> -#include <asm/io.h> -#include <asm/arch/platform.h> - -/****************************************************************************/ - -/* - * Hardware register access to the KS8695 LAN ethernet port - * (well, it is the 4 port switch really). - */ -#define ks8695_read(a) *((volatile unsigned long *) (KS8695_IO_BASE + (a))) -#define ks8695_write(a,v) *((volatile unsigned long *) (KS8695_IO_BASE + (a))) = (v) - -/****************************************************************************/ - -/* - * Define the descriptor in-memory data structures. - */ -struct ks8695_txdesc { - uint32_t owner; - uint32_t ctrl; - uint32_t addr; - uint32_t next; -}; - -struct ks8695_rxdesc { - uint32_t status; - uint32_t ctrl; - uint32_t addr; - uint32_t next; -}; - -/****************************************************************************/ - -/* - * Allocate local data structures to use for receiving and sending - * packets. Just to keep it all nice and simple. - */ - -#define TXDESCS 4 -#define RXDESCS 4 -#define BUFSIZE 2048 - -volatile struct ks8695_txdesc ks8695_tx[TXDESCS] __attribute__((aligned(256))); -volatile struct ks8695_rxdesc ks8695_rx[RXDESCS] __attribute__((aligned(256))); -volatile uint8_t ks8695_bufs[BUFSIZE*(TXDESCS+RXDESCS)] __attribute__((aligned(2048)));; - -/****************************************************************************/ - -/* - * Ideally we want to use the MAC address stored in flash. - * But we do some sanity checks in case they are not present - * first. - */ -unsigned char eth_mac[] = { - 0x00, 0x13, 0xc6, 0x00, 0x00, 0x00 -}; - -void ks8695_getmac(void) -{ - unsigned char *fp; - int i; - - /* Check if flash MAC is valid */ - fp = (unsigned char *) 0x0201c000; - for (i = 0; (i < 6); i++) { - if ((fp[i] != 0) && (fp[i] != 0xff)) - break; - } - - /* If we found a valid looking MAC address then use it */ - if (i < 6) - memcpy(ð_mac[0], fp, 6); -} - -/****************************************************************************/ - -static int ks8695_eth_init(struct eth_device *dev, bd_t *bd) -{ - int i; - - debug ("%s(%d): eth_reset()\n", __FILE__, __LINE__); - - /* Reset the ethernet engines first */ - ks8695_write(KS8695_LAN_DMA_TX, 0x80000000); - ks8695_write(KS8695_LAN_DMA_RX, 0x80000000); - - ks8695_getmac(); - - /* Set MAC address */ - ks8695_write(KS8695_LAN_MAC_LOW, (eth_mac[5] | (eth_mac[4] << 8) | - (eth_mac[3] << 16) | (eth_mac[2] << 24))); - ks8695_write(KS8695_LAN_MAC_HIGH, (eth_mac[1] | (eth_mac[0] << 8))); - - /* Turn the 4 port switch on */ - i = ks8695_read(KS8695_SWITCH_CTRL0); - ks8695_write(KS8695_SWITCH_CTRL0, (i | 0x1)); - /* ks8695_write(KS8695_WAN_CONTROL, 0x3f000066); */ - - /* Initialize descriptor rings */ - for (i = 0; (i < TXDESCS); i++) { - ks8695_tx[i].owner = 0; - ks8695_tx[i].ctrl = 0; - ks8695_tx[i].addr = (uint32_t) &ks8695_bufs[i*BUFSIZE]; - ks8695_tx[i].next = (uint32_t) &ks8695_tx[i+1]; - } - ks8695_tx[TXDESCS-1].ctrl = 0x02000000; - ks8695_tx[TXDESCS-1].next = (uint32_t) &ks8695_tx[0]; - - for (i = 0; (i < RXDESCS); i++) { - ks8695_rx[i].status = 0x80000000; - ks8695_rx[i].ctrl = BUFSIZE - 4; - ks8695_rx[i].addr = (uint32_t) &ks8695_bufs[(i+TXDESCS)*BUFSIZE]; - ks8695_rx[i].next = (uint32_t) &ks8695_rx[i+1]; - } - ks8695_rx[RXDESCS-1].ctrl |= 0x00080000; - ks8695_rx[RXDESCS-1].next = (uint32_t) &ks8695_rx[0]; - - /* The KS8695 is pretty slow reseting the ethernets... */ - udelay(2000000); - - /* Enable the ethernet engine */ - ks8695_write(KS8695_LAN_TX_LIST, (uint32_t) &ks8695_tx[0]); - ks8695_write(KS8695_LAN_RX_LIST, (uint32_t) &ks8695_rx[0]); - ks8695_write(KS8695_LAN_DMA_TX, 0x3); - ks8695_write(KS8695_LAN_DMA_RX, 0x71); - ks8695_write(KS8695_LAN_DMA_RX_START, 0x1); - - printf("KS8695 ETHERNET: %pM\n", eth_mac); - return 0; -} - -/****************************************************************************/ - -static void ks8695_eth_halt(struct eth_device *dev) -{ - debug ("%s(%d): eth_halt()\n", __FILE__, __LINE__); - - /* Reset the ethernet engines */ - ks8695_write(KS8695_LAN_DMA_TX, 0x80000000); - ks8695_write(KS8695_LAN_DMA_RX, 0x80000000); -} - -/****************************************************************************/ - -static int ks8695_eth_recv(struct eth_device *dev) -{ - volatile struct ks8695_rxdesc *dp; - int i, len = 0; - - debug ("%s(%d): eth_rx()\n", __FILE__, __LINE__); - - for (i = 0; (i < RXDESCS); i++) { - dp= &ks8695_rx[i]; - if ((dp->status & 0x80000000) == 0) { - len = (dp->status & 0x7ff) - 4; - NetReceive((void *) dp->addr, len); - dp->status = 0x80000000; - ks8695_write(KS8695_LAN_DMA_RX_START, 0x1); - break; - } - } - - return len; -} - -/****************************************************************************/ - -static int ks8695_eth_send(struct eth_device *dev, void *packet, int len) -{ - volatile struct ks8695_txdesc *dp; - static int next = 0; - - debug ("%s(%d): eth_send(packet=%p,len=%d)\n", __FILE__, __LINE__, - packet, len); - - dp = &ks8695_tx[next]; - memcpy((void *) dp->addr, (void *) packet, len); - - if (len < 64) { - memset((void *) (dp->addr + len), 0, 64-len); - len = 64; - } - - dp->ctrl = len | 0xe0000000; - dp->owner = 0x80000000; - - ks8695_write(KS8695_LAN_DMA_TX, 0x3); - ks8695_write(KS8695_LAN_DMA_TX_START, 0x1); - - if (++next >= TXDESCS) - next = 0; - - return 0; -} - -/****************************************************************************/ - -int ks8695_eth_initialize(void) -{ - struct eth_device *dev; - - dev = malloc(sizeof(*dev)); - if (dev == NULL) - return -1; - memset(dev, 0, sizeof(*dev)); - - dev->iobase = KS8695_IO_BASE + KS8695_LAN_DMA_TX; - dev->init = ks8695_eth_init; - dev->halt = ks8695_eth_halt; - dev->send = ks8695_eth_send; - dev->recv = ks8695_eth_recv; - strcpy(dev->name, "ks8695eth"); - - eth_register(dev); - return 0; -} diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 63b0cbf5da..b385852eee 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -27,7 +27,6 @@ obj-$(CONFIG_OPENCORES_YANU) += opencores_yanu.o obj-$(CONFIG_SYS_NS16550) += ns16550.o obj-$(CONFIG_S5P) += serial_s5p.o obj-$(CONFIG_IMX_SERIAL) += serial_imx.o -obj-$(CONFIG_KS8695_SERIAL) += serial_ks8695.o obj-$(CONFIG_MAX3100_SERIAL) += serial_max3100.o obj-$(CONFIG_MXC_UART) += serial_mxc.o obj-$(CONFIG_PXA_SERIAL) += serial_pxa.o diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c index 95c992a5a3..9f78492298 100644 --- a/drivers/serial/serial.c +++ b/drivers/serial/serial.c @@ -127,7 +127,6 @@ serial_initfunc(evb64260_serial_initialize); serial_initfunc(imx_serial_initialize); serial_initfunc(iop480_serial_initialize); serial_initfunc(jz_serial_initialize); -serial_initfunc(ks8695_serial_initialize); serial_initfunc(leon2_serial_initialize); serial_initfunc(leon3_serial_initialize); serial_initfunc(lh7a40x_serial_initialize); @@ -220,7 +219,6 @@ void serial_initialize(void) imx_serial_initialize(); iop480_serial_initialize(); jz_serial_initialize(); - ks8695_serial_initialize(); leon2_serial_initialize(); leon3_serial_initialize(); lh7a40x_serial_initialize(); diff --git a/drivers/serial/serial_ks8695.c b/drivers/serial/serial_ks8695.c deleted file mode 100644 index 13adabd112..0000000000 --- a/drivers/serial/serial_ks8695.c +++ /dev/null @@ -1,121 +0,0 @@ -/* - * serial.c -- KS8695 serial driver - * - * (C) Copyright 2004, Greg Ungerer <greg.ungerer@opengear.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/arch/platform.h> -#include <serial.h> -#include <linux/compiler.h> - -#ifndef CONFIG_SERIAL1 -#error "Bad: you didn't configure serial ..." -#endif - -DECLARE_GLOBAL_DATA_PTR; - -/* - * Define the UART hardware register access structure. - */ -struct ks8695uart { - unsigned int RX; /* 0x00 - Receive data (r) */ - unsigned int TX; /* 0x04 - Transmit data (w) */ - unsigned int FCR; /* 0x08 - Fifo Control (r/w) */ - unsigned int LCR; /* 0x0c - Line Control (r/w) */ - unsigned int MCR; /* 0x10 - Modem Control (r/w) */ - unsigned int LSR; /* 0x14 - Line Status (r/w) */ - unsigned int MSR; /* 0x18 - Modem Status (r/w) */ - unsigned int BD; /* 0x1c - Baud Rate (r/w) */ - unsigned int SR; /* 0x20 - Status (r/w) */ -}; - -#define KS8695_UART_ADDR ((void *) (KS8695_IO_BASE + KS8695_UART_RX_BUFFER)) -#define KS8695_UART_CLK 25000000 - - -/* - * Under some circumstances we want to be "quiet" and not issue any - * serial output - though we want u-boot to otherwise work and behave - * the same. By default be noisy. - */ -int serial_console = 1; - - -static void ks8695_serial_setbrg(void) -{ - volatile struct ks8695uart *uartp = KS8695_UART_ADDR; - - /* Set to global baud rate and 8 data bits, no parity, 1 stop bit*/ - uartp->BD = KS8695_UART_CLK / gd->baudrate; - uartp->LCR = KS8695_UART_LINEC_WLEN8; -} - -static int ks8695_serial_init(void) -{ - serial_console = 1; - serial_setbrg(); - return 0; -} - -static void ks8695_serial_raw_putc(const char c) -{ - volatile struct ks8695uart *uartp = KS8695_UART_ADDR; - int i; - - for (i = 0; (i < 0x100000); i++) { - if (uartp->LSR & KS8695_UART_LINES_TXFE) - break; - } - - uartp->TX = c; -} - -static void ks8695_serial_putc(const char c) -{ - if (serial_console) { - ks8695_serial_raw_putc(c); - if (c == '\n') - ks8695_serial_raw_putc('\r'); - } -} - -static int ks8695_serial_tstc(void) -{ - volatile struct ks8695uart *uartp = KS8695_UART_ADDR; - if (serial_console) - return ((uartp->LSR & KS8695_UART_LINES_RXFE) ? 1 : 0); - return 0; -} - -static int ks8695_serial_getc(void) -{ - volatile struct ks8695uart *uartp = KS8695_UART_ADDR; - - while ((uartp->LSR & KS8695_UART_LINES_RXFE) == 0) - ; - return (uartp->RX); -} - -static struct serial_device ks8695_serial_drv = { - .name = "ks8695_serial", - .start = ks8695_serial_init, - .stop = NULL, - .setbrg = ks8695_serial_setbrg, - .putc = ks8695_serial_putc, - .puts = default_serial_puts, - .getc = ks8695_serial_getc, - .tstc = ks8695_serial_tstc, -}; - -void ks8695_serial_initialize(void) -{ - serial_register(&ks8695_serial_drv); -} - -__weak struct serial_device *default_serial_console(void) -{ - return &ks8695_serial_drv; -} diff --git a/include/configs/cm4008.h b/include/configs/cm4008.h deleted file mode 100644 index 1cb54b3225..0000000000 --- a/include/configs/cm4008.h +++ /dev/null @@ -1,104 +0,0 @@ -/* - * (C) Copyright 2004 - * Greg Ungerer <greg.ungerer@opengear.com>. - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_KS8695 1 /* it is a KS8695 CPU */ -#define CONFIG_CM4008 1 /* it is an OpenGear CM4008 boad */ - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -#define CONFIG_DRIVER_KS8695ETH /* use KS8695 ethernet driver */ - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -/* - * Hardware drivers - */ - -/* - * select serial console configuration - */ -#define CONFIG_ENV_IS_NOWHERE -#define CONFIG_KS8695_SERIAL -#define CONFIG_SERIAL1 -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#undef CONFIG_CMD_SAVEENV - - -#define CONFIG_BOOTDELAY 0 -#define CONFIG_BOOTARGS "mem=16M console=ttyAM0,115200" -#define CONFIG_BOOTCOMMAND "gofsk 0x02200000" - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "boot > " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00800000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x01000000 /* 16 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x00008000 /* default load address */ - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x01000000 /* 16 MB */ -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 - -#define CONFIG_SYS_INIT_SP_ADDR 0x00020000 /* lowest 128k of RAM */ - -#define PHYS_FLASH_1 0x02000000 /* Flash Bank #1 */ -#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 128 KB sectors (x1) */ -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ -#define CONFIG_SYS_MAX_FLASH_SECT (128) /* max number of sectors on one chip */ - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (20*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (20*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -#define CONFIG_ENV_SIZE 0x20000 /* Total Size of Environment */ - -#endif /* __CONFIG_H */ diff --git a/include/configs/cm41xx.h b/include/configs/cm41xx.h deleted file mode 100644 index adebd4b7b0..0000000000 --- a/include/configs/cm41xx.h +++ /dev/null @@ -1,104 +0,0 @@ -/* - * (C) Copyright 2005 - * Greg Ungerer <greg.ungerer@opengear.com>. - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_KS8695 1 /* it is a KS8695 CPU */ -#define CONFIG_CM41xx 1 /* it is an OpenGear CM41xx boad */ - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -#define CONFIG_DRIVER_KS8695ETH /* use KS8695 ethernet driver */ - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -/* - * Hardware drivers - */ - -/* - * select serial console configuration - */ -#define CONFIG_ENV_IS_NOWHERE -#define CONFIG_KS8695_SERIAL -#define CONFIG_SERIAL1 -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#undef CONFIG_CMD_SAVEENV - - -#define CONFIG_BOOTDELAY 0 -#define CONFIG_BOOTARGS "mem=32M console=ttyAM0,115200" -#define CONFIG_BOOTCOMMAND "gofsk 0x02200000" - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "boot > " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00800000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x01000000 /* 16 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x00008000 /* default load address */ - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 - -#define CONFIG_SYS_INIT_SP_ADDR 0x00020000 /* lowest 128k of RAM */ - -#define PHYS_FLASH_1 0x02000000 /* Flash Bank #1 */ -#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 128 KB sectors (x1) */ -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ -#define CONFIG_SYS_MAX_FLASH_SECT (128) /* max number of sectors on one chip */ - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (20*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (20*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -#define CONFIG_ENV_SIZE 0x20000 /* Total Size of Environment */ - -#endif /* __CONFIG_H */ diff --git a/include/netdev.h b/include/netdev.h index daffc1222d..90140bd9bb 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -55,7 +55,6 @@ int ftmac100_initialize(bd_t *bits); int ftmac110_initialize(bd_t *bits); int greth_initialize(bd_t *bis); void gt6426x_eth_initialize(bd_t *bis); -int ks8695_eth_initialize(void); int ks8851_mll_initialize(u8 dev_num, int base_addr); int lan91c96_initialize(u8 dev_num, int base_addr); int macb_eth_initialize(int id, void *regs, unsigned int phy_addr); diff --git a/include/serial.h b/include/serial.h index 3d2e5697f4..de40e9406f 100644 --- a/include/serial.h +++ b/include/serial.h @@ -182,7 +182,6 @@ void evb64260_serial_initialize(void); void imx_serial_initialize(void); void iop480_serial_initialize(void); void jz_serial_initialize(void); -void ks8695_serial_initialize(void); void leon2_serial_initialize(void); void leon3_serial_initialize(void); void lh7a40x_serial_initialize(void); |