diff options
| -rw-r--r-- | drivers/firmware/ti_sci.c | 639 | ||||
| -rw-r--r-- | drivers/firmware/ti_sci.h | 289 | ||||
| -rw-r--r-- | include/linux/soc/ti/ti_sci_protocol.h | 78 |
3 files changed, 1006 insertions, 0 deletions
diff --git a/drivers/firmware/ti_sci.c b/drivers/firmware/ti_sci.c index 4d87cea7aa..7741fed416 100644 --- a/drivers/firmware/ti_sci.c +++ b/drivers/firmware/ti_sci.c @@ -774,6 +774,629 @@ static int ti_sci_cmd_get_device_resets(const struct ti_sci_handle *handle, NULL); } +/** + * ti_sci_set_clock_state() - Set clock state helper + * @handle: pointer to TI SCI handle + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. + * @flags: Header flags as needed + * @state: State to request for the clock. + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_set_clock_state(const struct ti_sci_handle *handle, + u32 dev_id, u8 clk_id, + u32 flags, u8 state) +{ + struct ti_sci_msg_req_set_clock_state req; + struct ti_sci_msg_hdr *resp; + struct ti_sci_info *info; + struct ti_sci_xfer *xfer; + int ret = 0; + + if (IS_ERR(handle)) + return PTR_ERR(handle); + if (!handle) + return -EINVAL; + + info = handle_to_ti_sci_info(handle); + + xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_SET_CLOCK_STATE, + flags | TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, + (u32 *)&req, sizeof(req), sizeof(*resp)); + if (IS_ERR(xfer)) { + ret = PTR_ERR(xfer); + dev_err(info->dev, "Message alloc failed(%d)\n", ret); + return ret; + } + req.dev_id = dev_id; + req.clk_id = clk_id; + req.request_state = state; + + ret = ti_sci_do_xfer(info, xfer); + if (ret) { + dev_err(info->dev, "Mbox send fail %d\n", ret); + return ret; + } + + resp = (struct ti_sci_msg_hdr *)xfer->tx_message.buf; + + if (!ti_sci_is_response_ack(resp)) + return -ENODEV; + + return ret; +} + +/** + * ti_sci_cmd_get_clock_state() - Get clock state helper + * @handle: pointer to TI SCI handle + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. + * @programmed_state: State requested for clock to move to + * @current_state: State that the clock is currently in + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_get_clock_state(const struct ti_sci_handle *handle, + u32 dev_id, u8 clk_id, + u8 *programmed_state, u8 *current_state) +{ + struct ti_sci_msg_resp_get_clock_state *resp; + struct ti_sci_msg_req_get_clock_state req; + struct ti_sci_info *info; + struct ti_sci_xfer *xfer; + int ret = 0; + + if (IS_ERR(handle)) + return PTR_ERR(handle); + if (!handle) + return -EINVAL; + + if (!programmed_state && !current_state) + return -EINVAL; + + info = handle_to_ti_sci_info(handle); + + xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_GET_CLOCK_STATE, + TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, + (u32 *)&req, sizeof(req), sizeof(*resp)); + if (IS_ERR(xfer)) { + ret = PTR_ERR(xfer); + dev_err(info->dev, "Message alloc failed(%d)\n", ret); + return ret; + } + req.dev_id = dev_id; + req.clk_id = clk_id; + + ret = ti_sci_do_xfer(info, xfer); + if (ret) { + dev_err(info->dev, "Mbox send fail %d\n", ret); + return ret; + } + + resp = (struct ti_sci_msg_resp_get_clock_state *)xfer->tx_message.buf; + + if (!ti_sci_is_response_ack(resp)) + return -ENODEV; + + if (programmed_state) + *programmed_state = resp->programmed_state; + if (current_state) + *current_state = resp->current_state; + + return ret; +} + +/** + * ti_sci_cmd_get_clock() - Get control of a clock from TI SCI + * @handle: pointer to TI SCI handle + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. + * @needs_ssc: 'true' if Spread Spectrum clock is desired, else 'false' + * @can_change_freq: 'true' if frequency change is desired, else 'false' + * @enable_input_term: 'true' if input termination is desired, else 'false' + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_get_clock(const struct ti_sci_handle *handle, u32 dev_id, + u8 clk_id, bool needs_ssc, bool can_change_freq, + bool enable_input_term) +{ + u32 flags = 0; + + flags |= needs_ssc ? MSG_FLAG_CLOCK_ALLOW_SSC : 0; + flags |= can_change_freq ? MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE : 0; + flags |= enable_input_term ? MSG_FLAG_CLOCK_INPUT_TERM : 0; + + return ti_sci_set_clock_state(handle, dev_id, clk_id, flags, + MSG_CLOCK_SW_STATE_REQ); +} + +/** + * ti_sci_cmd_idle_clock() - Idle a clock which is in our control + * @handle: pointer to TI SCI handle + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. + * + * NOTE: This clock must have been requested by get_clock previously. + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_idle_clock(const struct ti_sci_handle *handle, + u32 dev_id, u8 clk_id) +{ + return ti_sci_set_clock_state(handle, dev_id, clk_id, 0, + MSG_CLOCK_SW_STATE_UNREQ); +} + +/** + * ti_sci_cmd_put_clock() - Release a clock from our control back to TISCI + * @handle: pointer to TI SCI handle + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. + * + * NOTE: This clock must have been requested by get_clock previously. + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_put_clock(const struct ti_sci_handle *handle, + u32 dev_id, u8 clk_id) +{ + return ti_sci_set_clock_state(handle, dev_id, clk_id, 0, + MSG_CLOCK_SW_STATE_AUTO); +} + +/** + * ti_sci_cmd_clk_is_auto() - Is the clock being auto managed + * @handle: pointer to TI SCI handle + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. + * @req_state: state indicating if the clock is auto managed + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_clk_is_auto(const struct ti_sci_handle *handle, + u32 dev_id, u8 clk_id, bool *req_state) +{ + u8 state = 0; + int ret; + + if (!req_state) + return -EINVAL; + + ret = ti_sci_cmd_get_clock_state(handle, dev_id, clk_id, &state, NULL); + if (ret) + return ret; + + *req_state = (state == MSG_CLOCK_SW_STATE_AUTO); + return 0; +} + +/** + * ti_sci_cmd_clk_is_on() - Is the clock ON + * @handle: pointer to TI SCI handle + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. + * @req_state: state indicating if the clock is managed by us and enabled + * @curr_state: state indicating if the clock is ready for operation + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_clk_is_on(const struct ti_sci_handle *handle, u32 dev_id, + u8 clk_id, bool *req_state, bool *curr_state) +{ + u8 c_state = 0, r_state = 0; + int ret; + + if (!req_state && !curr_state) + return -EINVAL; + + ret = ti_sci_cmd_get_clock_state(handle, dev_id, clk_id, + &r_state, &c_state); + if (ret) + return ret; + + if (req_state) + *req_state = (r_state == MSG_CLOCK_SW_STATE_REQ); + if (curr_state) + *curr_state = (c_state == MSG_CLOCK_HW_STATE_READY); + return 0; +} + +/** + * ti_sci_cmd_clk_is_off() - Is the clock OFF + * @handle: pointer to TI SCI handle + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. + * @req_state: state indicating if the clock is managed by us and disabled + * @curr_state: state indicating if the clock is NOT ready for operation + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_clk_is_off(const struct ti_sci_handle *handle, u32 dev_id, + u8 clk_id, bool *req_state, bool *curr_state) +{ + u8 c_state = 0, r_state = 0; + int ret; + + if (!req_state && !curr_state) + return -EINVAL; + + ret = ti_sci_cmd_get_clock_state(handle, dev_id, clk_id, + &r_state, &c_state); + if (ret) + return ret; + + if (req_state) + *req_state = (r_state == MSG_CLOCK_SW_STATE_UNREQ); + if (curr_state) + *curr_state = (c_state == MSG_CLOCK_HW_STATE_NOT_READY); + return 0; +} + +/** + * ti_sci_cmd_clk_set_parent() - Set the clock source of a specific device clock + * @handle: pointer to TI SCI handle + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. + * @parent_id: Parent clock identifier to set + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_clk_set_parent(const struct ti_sci_handle *handle, + u32 dev_id, u8 clk_id, u8 parent_id) +{ + struct ti_sci_msg_req_set_clock_parent req; + struct ti_sci_msg_hdr *resp; + struct ti_sci_info *info; + struct ti_sci_xfer *xfer; + int ret = 0; + + if (IS_ERR(handle)) + return PTR_ERR(handle); + if (!handle) + return -EINVAL; + + info = handle_to_ti_sci_info(handle); + + xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_SET_CLOCK_PARENT, + TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, + (u32 *)&req, sizeof(req), sizeof(*resp)); + if (IS_ERR(xfer)) { + ret = PTR_ERR(xfer); + dev_err(info->dev, "Message alloc failed(%d)\n", ret); + return ret; + } + req.dev_id = dev_id; + req.clk_id = clk_id; + req.parent_id = parent_id; + + ret = ti_sci_do_xfer(info, xfer); + if (ret) { + dev_err(info->dev, "Mbox send fail %d\n", ret); + return ret; + } + + resp = (struct ti_sci_msg_hdr *)xfer->tx_message.buf; + + if (!ti_sci_is_response_ack(resp)) + return -ENODEV; + + return ret; +} + +/** + * ti_sci_cmd_clk_get_parent() - Get current parent clock source + * @handle: pointer to TI SCI handle + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. + * @parent_id: Current clock parent + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_clk_get_parent(const struct ti_sci_handle *handle, + u32 dev_id, u8 clk_id, u8 *parent_id) +{ + struct ti_sci_msg_resp_get_clock_parent *resp; + struct ti_sci_msg_req_get_clock_parent req; + struct ti_sci_info *info; + struct ti_sci_xfer *xfer; + int ret = 0; + + if (IS_ERR(handle)) + return PTR_ERR(handle); + if (!handle || !parent_id) + return -EINVAL; + + info = handle_to_ti_sci_info(handle); + + xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_GET_CLOCK_PARENT, + TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, + (u32 *)&req, sizeof(req), sizeof(*resp)); + if (IS_ERR(xfer)) { + ret = PTR_ERR(xfer); + dev_err(info->dev, "Message alloc failed(%d)\n", ret); + return ret; + } + req.dev_id = dev_id; + req.clk_id = clk_id; + + ret = ti_sci_do_xfer(info, xfer); + if (ret) { + dev_err(info->dev, "Mbox send fail %d\n", ret); + return ret; + } + + resp = (struct ti_sci_msg_resp_get_clock_parent *)xfer->tx_message.buf; + + if (!ti_sci_is_response_ack(resp)) + ret = -ENODEV; + else + *parent_id = resp->parent_id; + + return ret; +} + +/** + * ti_sci_cmd_clk_get_num_parents() - Get num parents of the current clk source + * @handle: pointer to TI SCI handle + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. + * @num_parents: Returns he number of parents to the current clock. + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_clk_get_num_parents(const struct ti_sci_handle *handle, + u32 dev_id, u8 clk_id, + u8 *num_parents) +{ + struct ti_sci_msg_resp_get_clock_num_parents *resp; + struct ti_sci_msg_req_get_clock_num_parents req; + struct ti_sci_info *info; + struct ti_sci_xfer *xfer; + int ret = 0; + + if (IS_ERR(handle)) + return PTR_ERR(handle); + if (!handle || !num_parents) + return -EINVAL; + + info = handle_to_ti_sci_info(handle); + + xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_GET_NUM_CLOCK_PARENTS, + TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, + (u32 *)&req, sizeof(req), sizeof(*resp)); + if (IS_ERR(xfer)) { + ret = PTR_ERR(xfer); + dev_err(info->dev, "Message alloc failed(%d)\n", ret); + return ret; + } + req.dev_id = dev_id; + req.clk_id = clk_id; + + ret = ti_sci_do_xfer(info, xfer); + if (ret) { + dev_err(info->dev, "Mbox send fail %d\n", ret); + return ret; + } + + resp = (struct ti_sci_msg_resp_get_clock_num_parents *) + xfer->tx_message.buf; + + if (!ti_sci_is_response_ack(resp)) + ret = -ENODEV; + else + *num_parents = resp->num_parents; + + return ret; +} + +/** + * ti_sci_cmd_clk_get_match_freq() - Find a good match for frequency + * @handle: pointer to TI SCI handle + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. + * @min_freq: The minimum allowable frequency in Hz. This is the minimum + * allowable programmed frequency and does not account for clock + * tolerances and jitter. + * @target_freq: The target clock frequency in Hz. A frequency will be + * processed as close to this target frequency as possible. + * @max_freq: The maximum allowable frequency in Hz. This is the maximum + * allowable programmed frequency and does not account for clock + * tolerances and jitter. + * @match_freq: Frequency match in Hz response. + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_clk_get_match_freq(const struct ti_sci_handle *handle, + u32 dev_id, u8 clk_id, u64 min_freq, + u64 target_freq, u64 max_freq, + u64 *match_freq) +{ + struct ti_sci_msg_resp_query_clock_freq *resp; + struct ti_sci_msg_req_query_clock_freq req; + struct ti_sci_info *info; + struct ti_sci_xfer *xfer; + int ret = 0; + + if (IS_ERR(handle)) + return PTR_ERR(handle); + if (!handle || !match_freq) + return -EINVAL; + + info = handle_to_ti_sci_info(handle); + + xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_QUERY_CLOCK_FREQ, + TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, + (u32 *)&req, sizeof(req), sizeof(*resp)); + if (IS_ERR(xfer)) { + ret = PTR_ERR(xfer); + dev_err(info->dev, "Message alloc failed(%d)\n", ret); + return ret; + } + req.dev_id = dev_id; + req.clk_id = clk_id; + req.min_freq_hz = min_freq; + req.target_freq_hz = target_freq; + req.max_freq_hz = max_freq; + + ret = ti_sci_do_xfer(info, xfer); + if (ret) { + dev_err(info->dev, "Mbox send fail %d\n", ret); + return ret; + } + + resp = (struct ti_sci_msg_resp_query_clock_freq *)xfer->tx_message.buf; + + if (!ti_sci_is_response_ack(resp)) + ret = -ENODEV; + else + *match_freq = resp->freq_hz; + + return ret; +} + +/** + * ti_sci_cmd_clk_set_freq() - Set a frequency for clock + * @handle: pointer to TI SCI handle + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. + * @min_freq: The minimum allowable frequency in Hz. This is the minimum + * allowable programmed frequency and does not account for clock + * tolerances and jitter. + * @target_freq: The target clock frequency in Hz. A frequency will be + * processed as close to this target frequency as possible. + * @max_freq: The maximum allowable frequency in Hz. This is the maximum + * allowable programmed frequency and does not account for clock + * tolerances and jitter. + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_clk_set_freq(const struct ti_sci_handle *handle, + u32 dev_id, u8 clk_id, u64 min_freq, + u64 target_freq, u64 max_freq) +{ + struct ti_sci_msg_req_set_clock_freq req; + struct ti_sci_msg_hdr *resp; + struct ti_sci_info *info; + struct ti_sci_xfer *xfer; + int ret = 0; + + if (IS_ERR(handle)) + return PTR_ERR(handle); + if (!handle) + return -EINVAL; + + info = handle_to_ti_sci_info(handle); + + xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_SET_CLOCK_FREQ, + TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, + (u32 *)&req, sizeof(req), sizeof(*resp)); + if (IS_ERR(xfer)) { + ret = PTR_ERR(xfer); + dev_err(info->dev, "Message alloc failed(%d)\n", ret); + return ret; + } + req.dev_id = dev_id; + req.clk_id = clk_id; + req.min_freq_hz = min_freq; + req.target_freq_hz = target_freq; + req.max_freq_hz = max_freq; + + ret = ti_sci_do_xfer(info, xfer); + if (ret) { + dev_err(info->dev, "Mbox send fail %d\n", ret); + return ret; + } + + resp = (struct ti_sci_msg_hdr *)xfer->tx_message.buf; + + if (!ti_sci_is_response_ack(resp)) + return -ENODEV; + + return ret; +} + +/** + * ti_sci_cmd_clk_get_freq() - Get current frequency + * @handle: pointer to TI SCI handle + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. + * @freq: Currently frequency in Hz + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_clk_get_freq(const struct ti_sci_handle *handle, + u32 dev_id, u8 clk_id, u64 *freq) +{ + struct ti_sci_msg_resp_get_clock_freq *resp; + struct ti_sci_msg_req_get_clock_freq req; + struct ti_sci_info *info; + struct ti_sci_xfer *xfer; + int ret = 0; + + if (IS_ERR(handle)) + return PTR_ERR(handle); + if (!handle || !freq) + return -EINVAL; + + info = handle_to_ti_sci_info(handle); + + xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_GET_CLOCK_FREQ, + TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, + (u32 *)&req, sizeof(req), sizeof(*resp)); + if (IS_ERR(xfer)) { + ret = PTR_ERR(xfer); + dev_err(info->dev, "Message alloc failed(%d)\n", ret); + return ret; + } + req.dev_id = dev_id; + req.clk_id = clk_id; + + ret = ti_sci_do_xfer(info, xfer); + if (ret) { + dev_err(info->dev, "Mbox send fail %d\n", ret); + return ret; + } + + resp = (struct ti_sci_msg_resp_get_clock_freq *)xfer->tx_message.buf; + + if (!ti_sci_is_response_ack(resp)) + ret = -ENODEV; + else + *freq = resp->freq_hz; + + return ret; +} + /* * ti_sci_setup_ops() - Setup the operations structures * @info: pointer to TISCI pointer @@ -783,6 +1406,7 @@ static void ti_sci_setup_ops(struct ti_sci_info *info) struct ti_sci_ops *ops = &info->handle.ops; struct ti_sci_board_ops *bops = &ops->board_ops; struct ti_sci_dev_ops *dops = &ops->dev_ops; + struct ti_sci_clk_ops *cops = &ops->clk_ops; bops->board_config = ti_sci_cmd_set_board_config; bops->board_config_rm = ti_sci_cmd_set_board_config_rm; @@ -800,6 +1424,21 @@ static void ti_sci_setup_ops(struct ti_sci_info *info) dops->is_transitioning = ti_sci_cmd_dev_is_trans; dops->set_device_resets = ti_sci_cmd_set_device_resets; dops->get_device_resets = ti_sci_cmd_get_device_resets; + + cops->get_clock = ti_sci_cmd_get_clock; + cops->idle_clock = ti_sci_cmd_idle_clock; + cops->put_clock = ti_sci_cmd_put_clock; + cops->is_auto = ti_sci_cmd_clk_is_auto; + cops->is_on = ti_sci_cmd_clk_is_on; + cops->is_off = ti_sci_cmd_clk_is_off; + + cops->set_parent = ti_sci_cmd_clk_set_parent; + cops->get_parent = ti_sci_cmd_clk_get_parent; + cops->get_num_parents = ti_sci_cmd_clk_get_num_parents; + + cops->get_best_match_freq = ti_sci_cmd_clk_get_match_freq; + cops->set_freq = ti_sci_cmd_clk_set_freq; + cops->get_freq = ti_sci_cmd_clk_get_freq; } /** diff --git a/drivers/firmware/ti_sci.h b/drivers/firmware/ti_sci.h index 96d8946a0a..83431a884d 100644 --- a/drivers/firmware/ti_sci.h +++ b/drivers/firmware/ti_sci.h @@ -31,6 +31,16 @@ #define TI_SCI_MSG_GET_DEVICE_STATE 0x0201 #define TI_SCI_MSG_SET_DEVICE_RESETS 0x0202 +/* Clock requests */ +#define TI_SCI_MSG_SET_CLOCK_STATE 0x0100 +#define TI_SCI_MSG_GET_CLOCK_STATE 0x0101 +#define TI_SCI_MSG_SET_CLOCK_PARENT 0x0102 +#define TI_SCI_MSG_GET_CLOCK_PARENT 0x0103 +#define TI_SCI_MSG_GET_NUM_CLOCK_PARENTS 0x0104 +#define TI_SCI_MSG_SET_CLOCK_FREQ 0x010c +#define TI_SCI_MSG_QUERY_CLOCK_FREQ 0x010d +#define TI_SCI_MSG_GET_CLOCK_FREQ 0x010e + /** * struct ti_sci_msg_hdr - Generic Message Header for All messages and responses * @type: Type of messages: One of TI_SCI_MSG* values @@ -196,4 +206,283 @@ struct ti_sci_msg_req_set_device_resets { u32 resets; } __packed; +/** + * struct ti_sci_msg_req_set_clock_state - Request to setup a Clock state + * @hdr: Generic Header, Certain flags can be set specific to the clocks: + * MSG_FLAG_CLOCK_ALLOW_SSC: Allow this clock to be modified + * via spread spectrum clocking. + * MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE: Allow this clock's + * frequency to be changed while it is running so long as it + * is within the min/max limits. + * MSG_FLAG_CLOCK_INPUT_TERM: Enable input termination, this + * is only applicable to clock inputs on the SoC pseudo-device. + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. + * @request_state: Request the state for the clock to be set to. + * MSG_CLOCK_SW_STATE_UNREQ: The IP does not require this clock, + * it can be disabled, regardless of the state of the device + * MSG_CLOCK_SW_STATE_AUTO: Allow the System Controller to + * automatically manage the state of this clock. If the device + * is enabled, then the clock is enabled. If the device is set + * to off or retention, then the clock is internally set as not + * being required by the device.(default) + * MSG_CLOCK_SW_STATE_REQ: Configure the clock to be enabled, + * regardless of the state of the device. + * + * Normally, all required clocks are managed by TISCI entity, this is used + * only for specific control *IF* required. Auto managed state is + * MSG_CLOCK_SW_STATE_AUTO, in other states, TISCI entity assume remote + * will explicitly control. + * + * Request type is TI_SCI_MSG_SET_CLOCK_STATE, response is a generic + * ACK or NACK message. + */ +struct ti_sci_msg_req_set_clock_state { + /* Additional hdr->flags options */ +#define MSG_FLAG_CLOCK_ALLOW_SSC TI_SCI_MSG_FLAG(8) +#define MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE TI_SCI_MSG_FLAG(9) +#define MSG_FLAG_CLOCK_INPUT_TERM TI_SCI_MSG_FLAG(10) + struct ti_sci_msg_hdr hdr; + u32 dev_id; + u8 clk_id; +#define MSG_CLOCK_SW_STATE_UNREQ 0 +#define MSG_CLOCK_SW_STATE_AUTO 1 +#define MSG_CLOCK_SW_STATE_REQ 2 + u8 request_state; +} __packed; + +/** + * struct ti_sci_msg_req_get_clock_state - Request for clock state + * @hdr: Generic Header + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to get state of. + * + * Request type is TI_SCI_MSG_GET_CLOCK_STATE, response is state + * of the clock + */ +struct ti_sci_msg_req_get_clock_state { + struct ti_sci_msg_hdr hdr; + u32 dev_id; + u8 clk_id; +} __packed; + +/** + * struct ti_sci_msg_resp_get_clock_state - Response to get clock state + * @hdr: Generic Header + * @programmed_state: Any programmed state of the clock. This is one of + * MSG_CLOCK_SW_STATE* values. + * @current_state: Current state of the clock. This is one of: + * MSG_CLOCK_HW_STATE_NOT_READY: Clock is not ready + * MSG_CLOCK_HW_STATE_READY: Clock is ready + * + * Response to TI_SCI_MSG_GET_CLOCK_STATE. + */ +struct ti_sci_msg_resp_get_clock_state { + struct ti_sci_msg_hdr hdr; + u8 programmed_state; +#define MSG_CLOCK_HW_STATE_NOT_READY 0 +#define MSG_CLOCK_HW_STATE_READY 1 + u8 current_state; +} __packed; + +/** + * struct ti_sci_msg_req_set_clock_parent - Set the clock parent + * @hdr: Generic Header + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. + * @parent_id: The new clock parent is selectable by an index via this + * parameter. + * + * Request type is TI_SCI_MSG_SET_CLOCK_PARENT, response is generic + * ACK / NACK message. + */ +struct ti_sci_msg_req_set_clock_parent { + struct ti_sci_msg_hdr hdr; + u32 dev_id; + u8 clk_id; + u8 parent_id; +} __packed; + +/** + * struct ti_sci_msg_req_get_clock_parent - Get the clock parent + * @hdr: Generic Header + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to get the parent for. + * + * Request type is TI_SCI_MSG_GET_CLOCK_PARENT, response is parent information + */ +struct ti_sci_msg_req_get_clock_parent { + struct ti_sci_msg_hdr hdr; + u32 dev_id; + u8 clk_id; +} __packed; + +/** + * struct ti_sci_msg_resp_get_clock_parent - Response with clock parent + * @hdr: Generic Header + * @parent_id: The current clock parent + * + * Response to TI_SCI_MSG_GET_CLOCK_PARENT. + */ +struct ti_sci_msg_resp_get_clock_parent { + struct ti_sci_msg_hdr hdr; + u8 parent_id; +} __packed; + +/** + * struct ti_sci_msg_req_get_clock_num_parents - Request to get clock parents + * @hdr: Generic header + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * + * This request provides information about how many clock parent options + * are available for a given clock to a device. This is typically used + * for input clocks. + * + * Request type is TI_SCI_MSG_GET_NUM_CLOCK_PARENTS, response is appropriate + * message, or NACK in case of inability to satisfy request. + */ +struct ti_sci_msg_req_get_clock_num_parents { + struct ti_sci_msg_hdr hdr; + u32 dev_id; + u8 clk_id; +} __packed; + +/** + * struct ti_sci_msg_resp_get_clock_num_parents - Response for get clk parents + * @hdr: Generic header + * @num_parents: Number of clock parents + * + * Response to TI_SCI_MSG_GET_NUM_CLOCK_PARENTS + */ +struct ti_sci_msg_resp_get_clock_num_parents { + struct ti_sci_msg_hdr hdr; + u8 num_parents; +} __packed; + +/** + * struct ti_sci_msg_req_query_clock_freq - Request to query a frequency + * @hdr: Generic Header + * @dev_id: Device identifier this request is for + * @min_freq_hz: The minimum allowable frequency in Hz. This is the minimum + * allowable programmed frequency and does not account for clock + * tolerances and jitter. + * @target_freq_hz: The target clock frequency. A frequency will be found + * as close to this target frequency as possible. + * @max_freq_hz: The maximum allowable frequency in Hz. This is the maximum + * allowable programmed frequency and does not account for clock + * tolerances and jitter. + * @clk_id: Clock identifier for the device for this request. + * + * NOTE: Normally clock frequency management is automatically done by TISCI + * entity. In case of specific requests, TISCI evaluates capability to achieve + * requested frequency within provided range and responds with + * result message. + * + * Request type is TI_SCI_MSG_QUERY_CLOCK_FREQ, response is appropriate message, + * or NACK in case of inability to satisfy request. + */ +struct ti_sci_msg_req_query_clock_freq { + struct ti_sci_msg_hdr hdr; + u32 dev_id; + u64 min_freq_hz; + u64 target_freq_hz; + u64 max_freq_hz; + u8 clk_id; +} __packed; + +/** + * struct ti_sci_msg_resp_query_clock_freq - Response to a clock frequency query + * @hdr: Generic Header + * @freq_hz: Frequency that is the best match in Hz. + * + * Response to request type TI_SCI_MSG_QUERY_CLOCK_FREQ. NOTE: if the request + * cannot be satisfied, the message will be of type NACK. + */ +struct ti_sci_msg_resp_query_clock_freq { + struct ti_sci_msg_hdr hdr; + u64 freq_hz; +} __packed; + +/** + * struct ti_sci_msg_req_set_clock_freq - Request to setup a clock frequency + * @hdr: Generic Header + * @dev_id: Device identifier this request is for + * @min_freq_hz: The minimum allowable frequency in Hz. This is the minimum + * allowable programmed frequency and does not account for clock + * tolerances and jitter. + * @target_freq_hz: The target clock frequency. The clock will be programmed + * at a rate as close to this target frequency as possible. + * @max_freq_hz: The maximum allowable frequency in Hz. This is the maximum + * allowable programmed frequency and does not account for clock + * tolerances and jitter. + * @clk_id: Clock identifier for the device for this request. + * + * NOTE: Normally clock frequency management is automatically done by TISCI + * entity. In case of specific requests, TISCI evaluates capability to achieve + * requested range and responds with success/failure message. + * + * This sets the desired frequency for a clock within an allowable + * range. This message will fail on an enabled clock unless + * MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE is set for the clock. Additionally, + * if other clocks have their frequency modified due to this message, + * they also must have the MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE or be disabled. + * + * Calling set frequency on a clock input to the SoC pseudo-device will + * inform the PMMC of that clock's frequency. Setting a frequency of + * zero will indicate the clock is disabled. + * + * Calling set frequency on clock outputs from the SoC pseudo-device will + * function similarly to setting the clock frequency on a device. + * + * Request type is TI_SCI_MSG_SET_CLOCK_FREQ, response is a generic ACK/NACK + * message. + */ +struct ti_sci_msg_req_set_clock_freq { + struct ti_sci_msg_hdr hdr; + u32 dev_id; + u64 min_freq_hz; + u64 target_freq_hz; + u64 max_freq_hz; + u8 clk_id; +} __packed; + +/** + * struct ti_sci_msg_req_get_clock_freq - Request to get the clock frequency + * @hdr: Generic Header + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * + * NOTE: Normally clock frequency management is automatically done by TISCI + * entity. In some cases, clock frequencies are configured by host. + * + * Request type is TI_SCI_MSG_GET_CLOCK_FREQ, responded with clock frequency + * that the clock is currently at. + */ +struct ti_sci_msg_req_get_clock_freq { + struct ti_sci_msg_hdr hdr; + u32 dev_id; + u8 clk_id; +} __packed; + +/** + * struct ti_sci_msg_resp_get_clock_freq - Response of clock frequency request + * @hdr: Generic Header + * @freq_hz: Frequency that the clock is currently on, in Hz. + * + * Response to request type TI_SCI_MSG_GET_CLOCK_FREQ. + */ +struct ti_sci_msg_resp_get_clock_freq { + struct ti_sci_msg_hdr hdr; + u64 freq_hz; +} __packed; + #endif /* __TI_SCI_H */ diff --git a/include/linux/soc/ti/ti_sci_protocol.h b/include/linux/soc/ti/ti_sci_protocol.h index b2a45cd9ae..30300bcef2 100644 --- a/include/linux/soc/ti/ti_sci_protocol.h +++ b/include/linux/soc/ti/ti_sci_protocol.h @@ -137,13 +137,91 @@ struct ti_sci_dev_ops { }; /** + * struct ti_sci_clk_ops - Clock control operations + * @get_clock: Request for activation of clock and manage by processor + * - needs_ssc: 'true' if Spread Spectrum clock is desired. + * - can_change_freq: 'true' if frequency change is desired. + * - enable_input_term: 'true' if input termination is desired. + * @idle_clock: Request for Idling a clock managed by processor + * @put_clock: Release the clock to be auto managed by TISCI + * @is_auto: Is the clock being auto managed + * - req_state: state indicating if the clock is auto managed + * @is_on: Is the clock ON + * - req_state: if the clock is requested to be forced ON + * - current_state: if the clock is currently ON + * @is_off: Is the clock OFF + * - req_state: if the clock is requested to be forced OFF + * - current_state: if the clock is currently Gated + * @set_parent: Set the clock source of a specific device clock + * - parent_id: Parent clock identifier to set. + * @get_parent: Get the current clock source of a specific device clock + * - parent_id: Parent clock identifier which is the parent. + * @get_num_parents: Get the number of parents of the current clock source + * - num_parents: returns the number of parent clocks. + * @get_best_match_freq: Find a best matching frequency for a frequency + * range. + * - match_freq: Best matching frequency in Hz. + * @set_freq: Set the Clock frequency + * @get_freq: Get the Clock frequency + * - current_freq: Frequency in Hz that the clock is at. + * + * NOTE: for all these functions, the following parameters are generic in + * nature: + * -handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle + * -did: Device identifier this request is for + * -cid: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. + * -min_freq: The minimum allowable frequency in Hz. This is the minimum + * allowable programmed frequency and does not account for clock + * tolerances and jitter. + * -target_freq: The target clock frequency in Hz. A frequency will be + * processed as close to this target frequency as possible. + * -max_freq: The maximum allowable frequency in Hz. This is the maximum + * allowable programmed frequency and does not account for clock + * tolerances and jitter. + * + * Request for the clock - NOTE: the client MUST maintain integrity of + * usage count by balancing get_clock with put_clock. No refcounting is + * managed by driver for that purpose. + */ +struct ti_sci_clk_ops { + int (*get_clock)(const struct ti_sci_handle *handle, u32 did, u8 cid, + bool needs_ssc, bool can_change_freq, + bool enable_input_term); + int (*idle_clock)(const struct ti_sci_handle *handle, u32 did, u8 cid); + int (*put_clock)(const struct ti_sci_handle *handle, u32 did, u8 cid); + int (*is_auto)(const struct ti_sci_handle *handle, u32 did, u8 cid, + bool *req_state); + int (*is_on)(const struct ti_sci_handle *handle, u32 did, u8 cid, + bool *req_state, bool *current_state); + int (*is_off)(const struct ti_sci_handle *handle, u32 did, u8 cid, + bool *req_state, bool *current_state); + int (*set_parent)(const struct ti_sci_handle *handle, u32 did, u8 cid, + u8 parent_id); + int (*get_parent)(const struct ti_sci_handle *handle, u32 did, u8 cid, + u8 *parent_id); + int (*get_num_parents)(const struct ti_sci_handle *handle, u32 did, + u8 cid, u8 *num_parents); + int (*get_best_match_freq)(const struct ti_sci_handle *handle, u32 did, + u8 cid, u64 min_freq, u64 target_freq, + u64 max_freq, u64 *match_freq); + int (*set_freq)(const struct ti_sci_handle *handle, u32 did, u8 cid, + u64 min_freq, u64 target_freq, u64 max_freq); + int (*get_freq)(const struct ti_sci_handle *handle, u32 did, u8 cid, + u64 *current_freq); +}; + +/** * struct ti_sci_ops - Function support for TI SCI * @board_ops: Miscellaneous operations * @dev_ops: Device specific operations + * @clk_ops: Clock specific operations */ struct ti_sci_ops { struct ti_sci_board_ops board_ops; struct ti_sci_dev_ops dev_ops; + struct ti_sci_clk_ops clk_ops; }; /** |