diff options
| author | Adam Ford <aford173@gmail.com> | 2017-02-06 11:31:43 -0600 |
|---|---|---|
| committer | Jaehoon Chung <jh80.chung@samsung.com> | 2017-02-09 20:37:06 +0900 |
| commit | 6aca17c9b7e8d311c86d4cf54daef65bdf68ef73 (patch) | |
| tree | c3667e90cb45816db0d1f0f1690f8a3e33167382 /drivers | |
| parent | d14f1d511a8070f6c435a3ccc300ae488449706e (diff) | |
| download | u-boot-6aca17c9b7e8d311c86d4cf54daef65bdf68ef73.tar.gz u-boot-6aca17c9b7e8d311c86d4cf54daef65bdf68ef73.tar.bz2 u-boot-6aca17c9b7e8d311c86d4cf54daef65bdf68ef73.zip | |
drivers: mmc: omap_hsmmc: Fix IO Buffer on OMAP36xx
On the OMAP36xx/37xx the CONTROL_WKUP_CTRL register has
a field (bit 6) named GPIO_IO_PWRDNZ. If 0, the IO buffers which
are related to GPIO_126, 127 and 129 are disabled. Some boards may
need this for MMC. After the PBIAS is configured, this bit should
be set high to enable these GPIO pins.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/mmc/Kconfig | 12 | ||||
| -rw-r--r-- | drivers/mmc/omap_hsmmc.c | 18 |
2 files changed, 30 insertions, 0 deletions
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index 0c07781115..01d1dbfb1b 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -131,6 +131,18 @@ config MMC_OMAP_HS If unsure, say N. +config MMC_OMAP36XX_PINS + bool "Enable MMC1 on OMAP36xx/37xx" + depends on OMAP34XX && MMC_OMAP_HS + help + This enables extended-drain in the MMC/SD/SDIO1I/O and + GPIO-associated I/O cells (gpio_126, gpio_127, and gpio_129) + specific to the OMAP36xx/37xx using MMC1 + + If you have a controller with this interface, say Y here. + + If unsure, say N. + config SH_SDHI bool "SuperH/Renesas ARM SoCs on-chip SDHI host controller support" depends on RMOBILE diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c index 5bb628d125..b63ce565f2 100644 --- a/drivers/mmc/omap_hsmmc.c +++ b/drivers/mmc/omap_hsmmc.c @@ -38,6 +38,7 @@ #include <asm/arch/sys_proto.h> #endif #include <dm.h> +#include <asm/arch-omap3/mux.h> DECLARE_GLOBAL_DATA_PTR; @@ -102,6 +103,9 @@ static unsigned char mmc_board_init(struct mmc *mmc) t2_t *t2_base = (t2_t *)T2_BASE; struct prcm *prcm_base = (struct prcm *)PRCM_BASE; u32 pbias_lite; +#ifdef CONFIG_MMC_OMAP36XX_PINS + u32 wkup_ctrl = readl(OMAP34XX_CTRL_WKUP_CTRL); +#endif pbias_lite = readl(&t2_base->pbias_lite); pbias_lite &= ~(PBIASLITEPWRDNZ1 | PBIASLITEPWRDNZ0); @@ -109,12 +113,26 @@ static unsigned char mmc_board_init(struct mmc *mmc) /* for cairo board, we need to set up 1.8 Volt bias level on MMC1 */ pbias_lite &= ~PBIASLITEVMODE0; #endif +#ifdef CONFIG_MMC_OMAP36XX_PINS + if (get_cpu_family() == CPU_OMAP36XX) { + /* Disable extended drain IO before changing PBIAS */ + wkup_ctrl &= ~OMAP34XX_CTRL_WKUP_CTRL_GPIO_IO_PWRDNZ; + writel(wkup_ctrl, OMAP34XX_CTRL_WKUP_CTRL); + } +#endif writel(pbias_lite, &t2_base->pbias_lite); writel(pbias_lite | PBIASLITEPWRDNZ1 | PBIASSPEEDCTRL0 | PBIASLITEPWRDNZ0, &t2_base->pbias_lite); +#ifdef CONFIG_MMC_OMAP36XX_PINS + if (get_cpu_family() == CPU_OMAP36XX) + /* Enable extended drain IO after changing PBIAS */ + writel(wkup_ctrl | + OMAP34XX_CTRL_WKUP_CTRL_GPIO_IO_PWRDNZ, + OMAP34XX_CTRL_WKUP_CTRL); +#endif writel(readl(&t2_base->devconf0) | MMCSDIO1ADPCLKISEL, &t2_base->devconf0); |