smc911x: split out useful defines/functions into local header

The smc911x driver has a lot of useful defines/functions which can be used
by pieces of code (such as example eeprom programmers).  Rather than
forcing each place to duplicate these defines/functions, split them out
of the smdc911x driver into a local header.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Ben Warren <biggerbadderben@gmail.com>
CC: Sascha Hauer <s.hauer@pengutronix.de>
CC: Guennadi Liakhovetski <lg@denx.de>
CC: Magnus Lilja <lilja.magnus@gmail.com>
CC: Ben Warren <biggerbadderben@gmail.com>

1 files changed, 2 insertions, 455 deletions

diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
index 9cc4fce002..1ded8f01d0 100644
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.c
@@ -27,38 +27,7 @@
 #include <net.h>
 #include <miiphy.h>
 
-#if defined (CONFIG_DRIVER_SMC911X_32_BIT) && \
-	defined (CONFIG_DRIVER_SMC911X_16_BIT)
-#error "SMC911X: Only one of CONFIG_DRIVER_SMC911X_32_BIT and \
-	CONFIG_DRIVER_SMC911X_16_BIT shall be set"
-#endif
-
-#if defined (CONFIG_DRIVER_SMC911X_32_BIT)
-static inline u32 __smc911x_reg_read(u32 addr)
-{
-	return *(volatile u32*)addr;
-}
-u32 smc911x_reg_read(u32 addr) __attribute__((weak, alias("__smc911x_reg_read")));
-
-static inline void __smc911x_reg_write(u32 addr, u32 val)
-{
-	*(volatile u32*)addr = val;
-}
-void smc911x_reg_write(u32 addr, u32 val) __attribute__((weak, alias("__smc911x_reg_write")));
-#elif defined (CONFIG_DRIVER_SMC911X_16_BIT)
-static inline u32 smc911x_reg_read(u32 addr)
-{
-	volatile u16 *addr_16 = (u16 *)addr;
-	return ((*addr_16 & 0x0000ffff) | (*(addr_16 + 1) << 16));
-}
-static inline void smc911x_reg_write(u32 addr, u32 val)
-{
-	*(volatile u16*)addr = (u16)val;
-	*(volatile u16*)(addr + 2) = (u16)(val >> 16);
-}
-#else
-#error "SMC911X: undefined bus width"
-#endif /* CONFIG_DRIVER_SMC911X_16_BIT */
+#include "smc911x.h"
 
 u32 pkt_data_pull(u32 addr) \
 	__attribute__ ((weak, alias ("smc911x_reg_read")));
@@ -67,370 +36,6 @@ void pkt_data_push(u32 addr, u32 val) \
 
 #define mdelay(n)       udelay((n)*1000)
 
-/* Below are the register offsets and bit definitions
- * of the Lan911x memory space
- */
-#define RX_DATA_FIFO		 (CONFIG_DRIVER_SMC911X_BASE + 0x00)
-
-#define TX_DATA_FIFO		 (CONFIG_DRIVER_SMC911X_BASE + 0x20)
-#define	TX_CMD_A_INT_ON_COMP			0x80000000
-#define	TX_CMD_A_INT_BUF_END_ALGN		0x03000000
-#define	TX_CMD_A_INT_4_BYTE_ALGN		0x00000000
-#define	TX_CMD_A_INT_16_BYTE_ALGN		0x01000000
-#define	TX_CMD_A_INT_32_BYTE_ALGN		0x02000000
-#define	TX_CMD_A_INT_DATA_OFFSET		0x001F0000
-#define	TX_CMD_A_INT_FIRST_SEG			0x00002000
-#define	TX_CMD_A_INT_LAST_SEG			0x00001000
-#define	TX_CMD_A_BUF_SIZE			0x000007FF
-#define	TX_CMD_B_PKT_TAG			0xFFFF0000
-#define	TX_CMD_B_ADD_CRC_DISABLE		0x00002000
-#define	TX_CMD_B_DISABLE_PADDING		0x00001000
-#define	TX_CMD_B_PKT_BYTE_LENGTH		0x000007FF
-
-#define RX_STATUS_FIFO		(CONFIG_DRIVER_SMC911X_BASE + 0x40)
-#define	RX_STS_PKT_LEN				0x3FFF0000
-#define	RX_STS_ES				0x00008000
-#define	RX_STS_BCST				0x00002000
-#define	RX_STS_LEN_ERR				0x00001000
-#define	RX_STS_RUNT_ERR				0x00000800
-#define	RX_STS_MCAST				0x00000400
-#define	RX_STS_TOO_LONG				0x00000080
-#define	RX_STS_COLL				0x00000040
-#define	RX_STS_ETH_TYPE				0x00000020
-#define	RX_STS_WDOG_TMT				0x00000010
-#define	RX_STS_MII_ERR				0x00000008
-#define	RX_STS_DRIBBLING			0x00000004
-#define	RX_STS_CRC_ERR				0x00000002
-#define RX_STATUS_FIFO_PEEK	(CONFIG_DRIVER_SMC911X_BASE + 0x44)
-#define TX_STATUS_FIFO		(CONFIG_DRIVER_SMC911X_BASE + 0x48)
-#define	TX_STS_TAG				0xFFFF0000
-#define	TX_STS_ES				0x00008000
-#define	TX_STS_LOC				0x00000800
-#define	TX_STS_NO_CARR				0x00000400
-#define	TX_STS_LATE_COLL			0x00000200
-#define	TX_STS_MANY_COLL			0x00000100
-#define	TX_STS_COLL_CNT				0x00000078
-#define	TX_STS_MANY_DEFER			0x00000004
-#define	TX_STS_UNDERRUN				0x00000002
-#define	TX_STS_DEFERRED				0x00000001
-#define TX_STATUS_FIFO_PEEK	(CONFIG_DRIVER_SMC911X_BASE + 0x4C)
-#define ID_REV			(CONFIG_DRIVER_SMC911X_BASE + 0x50)
-#define	ID_REV_CHIP_ID				0xFFFF0000  /* RO */
-#define	ID_REV_REV_ID				0x0000FFFF  /* RO */
-
-#define INT_CFG			(CONFIG_DRIVER_SMC911X_BASE + 0x54)
-#define	INT_CFG_INT_DEAS			0xFF000000  /* R/W */
-#define	INT_CFG_INT_DEAS_CLR			0x00004000
-#define	INT_CFG_INT_DEAS_STS			0x00002000
-#define	INT_CFG_IRQ_INT				0x00001000  /* RO */
-#define	INT_CFG_IRQ_EN				0x00000100  /* R/W */
-#define	INT_CFG_IRQ_POL				0x00000010  /* R/W Not Affected by SW Reset */
-#define	INT_CFG_IRQ_TYPE			0x00000001  /* R/W Not Affected by SW Reset */
-
-#define INT_STS			(CONFIG_DRIVER_SMC911X_BASE + 0x58)
-#define	INT_STS_SW_INT				0x80000000  /* R/WC */
-#define	INT_STS_TXSTOP_INT			0x02000000  /* R/WC */
-#define	INT_STS_RXSTOP_INT			0x01000000  /* R/WC */
-#define	INT_STS_RXDFH_INT			0x00800000  /* R/WC */
-#define	INT_STS_RXDF_INT			0x00400000  /* R/WC */
-#define	INT_STS_TX_IOC				0x00200000  /* R/WC */
-#define	INT_STS_RXD_INT				0x00100000  /* R/WC */
-#define	INT_STS_GPT_INT				0x00080000  /* R/WC */
-#define	INT_STS_PHY_INT				0x00040000  /* RO */
-#define	INT_STS_PME_INT				0x00020000  /* R/WC */
-#define	INT_STS_TXSO				0x00010000  /* R/WC */
-#define	INT_STS_RWT				0x00008000  /* R/WC */
-#define	INT_STS_RXE				0x00004000  /* R/WC */
-#define	INT_STS_TXE				0x00002000  /* R/WC */
-/*#define	INT_STS_ERX		0x00001000*/  /* R/WC */
-#define	INT_STS_TDFU				0x00000800  /* R/WC */
-#define	INT_STS_TDFO				0x00000400  /* R/WC */
-#define	INT_STS_TDFA				0x00000200  /* R/WC */
-#define	INT_STS_TSFF				0x00000100  /* R/WC */
-#define	INT_STS_TSFL				0x00000080  /* R/WC */
-/*#define	INT_STS_RXDF		0x00000040*/  /* R/WC */
-#define	INT_STS_RDFO				0x00000040  /* R/WC */
-#define	INT_STS_RDFL				0x00000020  /* R/WC */
-#define	INT_STS_RSFF				0x00000010  /* R/WC */
-#define	INT_STS_RSFL				0x00000008  /* R/WC */
-#define	INT_STS_GPIO2_INT			0x00000004  /* R/WC */
-#define	INT_STS_GPIO1_INT			0x00000002  /* R/WC */
-#define	INT_STS_GPIO0_INT			0x00000001  /* R/WC */
-#define INT_EN			(CONFIG_DRIVER_SMC911X_BASE + 0x5C)
-#define	INT_EN_SW_INT_EN			0x80000000  /* R/W */
-#define	INT_EN_TXSTOP_INT_EN			0x02000000  /* R/W */
-#define	INT_EN_RXSTOP_INT_EN			0x01000000  /* R/W */
-#define	INT_EN_RXDFH_INT_EN			0x00800000  /* R/W */
-/*#define	INT_EN_RXDF_INT_EN		0x00400000*/  /* R/W */
-#define	INT_EN_TIOC_INT_EN			0x00200000  /* R/W */
-#define	INT_EN_RXD_INT_EN			0x00100000  /* R/W */
-#define	INT_EN_GPT_INT_EN			0x00080000  /* R/W */
-#define	INT_EN_PHY_INT_EN			0x00040000  /* R/W */
-#define	INT_EN_PME_INT_EN			0x00020000  /* R/W */
-#define	INT_EN_TXSO_EN				0x00010000  /* R/W */
-#define	INT_EN_RWT_EN				0x00008000  /* R/W */
-#define	INT_EN_RXE_EN				0x00004000  /* R/W */
-#define	INT_EN_TXE_EN				0x00002000  /* R/W */
-/*#define	INT_EN_ERX_EN			0x00001000*/  /* R/W */
-#define	INT_EN_TDFU_EN				0x00000800  /* R/W */
-#define	INT_EN_TDFO_EN				0x00000400  /* R/W */
-#define	INT_EN_TDFA_EN				0x00000200  /* R/W */
-#define	INT_EN_TSFF_EN				0x00000100  /* R/W */
-#define	INT_EN_TSFL_EN				0x00000080  /* R/W */
-/*#define	INT_EN_RXDF_EN			0x00000040*/  /* R/W */
-#define	INT_EN_RDFO_EN				0x00000040  /* R/W */
-#define	INT_EN_RDFL_EN				0x00000020  /* R/W */
-#define	INT_EN_RSFF_EN				0x00000010  /* R/W */
-#define	INT_EN_RSFL_EN				0x00000008  /* R/W */
-#define	INT_EN_GPIO2_INT			0x00000004  /* R/W */
-#define	INT_EN_GPIO1_INT			0x00000002  /* R/W */
-#define	INT_EN_GPIO0_INT			0x00000001  /* R/W */
-
-#define BYTE_TEST		(CONFIG_DRIVER_SMC911X_BASE + 0x64)
-#define FIFO_INT		(CONFIG_DRIVER_SMC911X_BASE + 0x68)
-#define	FIFO_INT_TX_AVAIL_LEVEL			0xFF000000  /* R/W */
-#define	FIFO_INT_TX_STS_LEVEL			0x00FF0000  /* R/W */
-#define	FIFO_INT_RX_AVAIL_LEVEL			0x0000FF00  /* R/W */
-#define	FIFO_INT_RX_STS_LEVEL			0x000000FF  /* R/W */
-
-#define RX_CFG			(CONFIG_DRIVER_SMC911X_BASE + 0x6C)
-#define	RX_CFG_RX_END_ALGN			0xC0000000  /* R/W */
-#define		RX_CFG_RX_END_ALGN4		0x00000000  /* R/W */
-#define		RX_CFG_RX_END_ALGN16		0x40000000  /* R/W */
-#define		RX_CFG_RX_END_ALGN32		0x80000000  /* R/W */
-#define	RX_CFG_RX_DMA_CNT			0x0FFF0000  /* R/W */
-#define	RX_CFG_RX_DUMP				0x00008000  /* R/W */
-#define	RX_CFG_RXDOFF				0x00001F00  /* R/W */
-/*#define	RX_CFG_RXBAD			0x00000001*/  /* R/W */
-
-#define TX_CFG			(CONFIG_DRIVER_SMC911X_BASE + 0x70)
-/*#define	TX_CFG_TX_DMA_LVL		0xE0000000*/	 /* R/W */
-/*#define	TX_CFG_TX_DMA_CNT		0x0FFF0000*/	 /* R/W Self Clearing */
-#define	TX_CFG_TXS_DUMP				0x00008000  /* Self Clearing */
-#define	TX_CFG_TXD_DUMP				0x00004000  /* Self Clearing */
-#define	TX_CFG_TXSAO				0x00000004  /* R/W */
-#define	TX_CFG_TX_ON				0x00000002  /* R/W */
-#define	TX_CFG_STOP_TX				0x00000001  /* Self Clearing */
-
-#define HW_CFG			(CONFIG_DRIVER_SMC911X_BASE + 0x74)
-#define	HW_CFG_TTM				0x00200000  /* R/W */
-#define	HW_CFG_SF				0x00100000  /* R/W */
-#define	HW_CFG_TX_FIF_SZ			0x000F0000  /* R/W */
-#define	HW_CFG_TR				0x00003000  /* R/W */
-#define	HW_CFG_PHY_CLK_SEL			0x00000060  /* R/W */
-#define	HW_CFG_PHY_CLK_SEL_INT_PHY		0x00000000 /* R/W */
-#define	HW_CFG_PHY_CLK_SEL_EXT_PHY		0x00000020 /* R/W */
-#define	HW_CFG_PHY_CLK_SEL_CLK_DIS		0x00000040 /* R/W */
-#define	HW_CFG_SMI_SEL				0x00000010  /* R/W */
-#define	HW_CFG_EXT_PHY_DET			0x00000008  /* RO */
-#define	HW_CFG_EXT_PHY_EN			0x00000004  /* R/W */
-#define	HW_CFG_32_16_BIT_MODE			0x00000004  /* RO */
-#define	HW_CFG_SRST_TO				0x00000002  /* RO */
-#define	HW_CFG_SRST				0x00000001  /* Self Clearing */
-
-#define RX_DP_CTRL		(CONFIG_DRIVER_SMC911X_BASE + 0x78)
-#define	RX_DP_CTRL_RX_FFWD			0x80000000  /* R/W */
-#define	RX_DP_CTRL_FFWD_BUSY			0x80000000  /* RO */
-
-#define RX_FIFO_INF		(CONFIG_DRIVER_SMC911X_BASE + 0x7C)
-#define	 RX_FIFO_INF_RXSUSED			0x00FF0000  /* RO */
-#define	 RX_FIFO_INF_RXDUSED			0x0000FFFF  /* RO */
-
-#define TX_FIFO_INF		(CONFIG_DRIVER_SMC911X_BASE + 0x80)
-#define	TX_FIFO_INF_TSUSED			0x00FF0000  /* RO */
-#define	TX_FIFO_INF_TDFREE			0x0000FFFF  /* RO */
-
-#define PMT_CTRL		(CONFIG_DRIVER_SMC911X_BASE + 0x84)
-#define	PMT_CTRL_PM_MODE			0x00003000  /* Self Clearing */
-#define	PMT_CTRL_PHY_RST			0x00000400  /* Self Clearing */
-#define	PMT_CTRL_WOL_EN				0x00000200  /* R/W */
-#define	PMT_CTRL_ED_EN				0x00000100  /* R/W */
-#define	PMT_CTRL_PME_TYPE			0x00000040  /* R/W Not Affected by SW Reset */
-#define	PMT_CTRL_WUPS				0x00000030  /* R/WC */
-#define	PMT_CTRL_WUPS_NOWAKE			0x00000000  /* R/WC */
-#define	PMT_CTRL_WUPS_ED			0x00000010  /* R/WC */
-#define	PMT_CTRL_WUPS_WOL			0x00000020  /* R/WC */
-#define	PMT_CTRL_WUPS_MULTI			0x00000030  /* R/WC */
-#define	PMT_CTRL_PME_IND			0x00000008  /* R/W */
-#define	PMT_CTRL_PME_POL			0x00000004  /* R/W */
-#define	PMT_CTRL_PME_EN				0x00000002  /* R/W Not Affected by SW Reset */
-#define	PMT_CTRL_READY				0x00000001  /* RO */
-
-#define GPIO_CFG		(CONFIG_DRIVER_SMC911X_BASE + 0x88)
-#define	GPIO_CFG_LED3_EN			0x40000000  /* R/W */
-#define	GPIO_CFG_LED2_EN			0x20000000  /* R/W */
-#define	GPIO_CFG_LED1_EN			0x10000000  /* R/W */
-#define	GPIO_CFG_GPIO2_INT_POL			0x04000000  /* R/W */
-#define	GPIO_CFG_GPIO1_INT_POL			0x02000000  /* R/W */
-#define	GPIO_CFG_GPIO0_INT_POL			0x01000000  /* R/W */
-#define	GPIO_CFG_EEPR_EN			0x00700000  /* R/W */
-#define	GPIO_CFG_GPIOBUF2			0x00040000  /* R/W */
-#define	GPIO_CFG_GPIOBUF1			0x00020000  /* R/W */
-#define	GPIO_CFG_GPIOBUF0			0x00010000  /* R/W */
-#define	GPIO_CFG_GPIODIR2			0x00000400  /* R/W */
-#define	GPIO_CFG_GPIODIR1			0x00000200  /* R/W */
-#define	GPIO_CFG_GPIODIR0			0x00000100  /* R/W */
-#define	GPIO_CFG_GPIOD4				0x00000010  /* R/W */
-#define	GPIO_CFG_GPIOD3				0x00000008  /* R/W */
-#define	GPIO_CFG_GPIOD2				0x00000004  /* R/W */
-#define	GPIO_CFG_GPIOD1				0x00000002  /* R/W */
-#define	GPIO_CFG_GPIOD0				0x00000001  /* R/W */
-
-#define GPT_CFG			(CONFIG_DRIVER_SMC911X_BASE + 0x8C)
-#define	GPT_CFG_TIMER_EN			0x20000000  /* R/W */
-#define	GPT_CFG_GPT_LOAD			0x0000FFFF  /* R/W */
-
-#define GPT_CNT			(CONFIG_DRIVER_SMC911X_BASE + 0x90)
-#define	GPT_CNT_GPT_CNT				0x0000FFFF  /* RO */
-
-#define ENDIAN			(CONFIG_DRIVER_SMC911X_BASE + 0x98)
-#define FREE_RUN		(CONFIG_DRIVER_SMC911X_BASE + 0x9C)
-#define RX_DROP			(CONFIG_DRIVER_SMC911X_BASE + 0xA0)
-#define MAC_CSR_CMD		(CONFIG_DRIVER_SMC911X_BASE + 0xA4)
-#define	 MAC_CSR_CMD_CSR_BUSY			0x80000000  /* Self Clearing */
-#define	 MAC_CSR_CMD_R_NOT_W			0x40000000  /* R/W */
-#define	 MAC_CSR_CMD_CSR_ADDR			0x000000FF  /* R/W */
-
-#define MAC_CSR_DATA		(CONFIG_DRIVER_SMC911X_BASE + 0xA8)
-#define AFC_CFG			(CONFIG_DRIVER_SMC911X_BASE + 0xAC)
-#define		AFC_CFG_AFC_HI			0x00FF0000  /* R/W */
-#define		AFC_CFG_AFC_LO			0x0000FF00  /* R/W */
-#define		AFC_CFG_BACK_DUR		0x000000F0  /* R/W */
-#define		AFC_CFG_FCMULT			0x00000008  /* R/W */
-#define		AFC_CFG_FCBRD			0x00000004  /* R/W */
-#define		AFC_CFG_FCADD			0x00000002  /* R/W */
-#define		AFC_CFG_FCANY			0x00000001  /* R/W */
-
-#define E2P_CMD			(CONFIG_DRIVER_SMC911X_BASE + 0xB0)
-#define		E2P_CMD_EPC_BUSY		0x80000000  /* Self Clearing */
-#define		E2P_CMD_EPC_CMD			0x70000000  /* R/W */
-#define		E2P_CMD_EPC_CMD_READ		0x00000000  /* R/W */
-#define		E2P_CMD_EPC_CMD_EWDS		0x10000000  /* R/W */
-#define		E2P_CMD_EPC_CMD_EWEN		0x20000000  /* R/W */
-#define		E2P_CMD_EPC_CMD_WRITE		0x30000000  /* R/W */
-#define		E2P_CMD_EPC_CMD_WRAL		0x40000000  /* R/W */
-#define		E2P_CMD_EPC_CMD_ERASE		0x50000000  /* R/W */
-#define		E2P_CMD_EPC_CMD_ERAL		0x60000000  /* R/W */
-#define		E2P_CMD_EPC_CMD_RELOAD		0x70000000  /* R/W */
-#define		E2P_CMD_EPC_TIMEOUT		0x00000200  /* RO */
-#define		E2P_CMD_MAC_ADDR_LOADED		0x00000100  /* RO */
-#define		E2P_CMD_EPC_ADDR		0x000000FF  /* R/W */
-
-#define E2P_DATA		(CONFIG_DRIVER_SMC911X_BASE + 0xB4)
-#define	E2P_DATA_EEPROM_DATA			0x000000FF  /* R/W */
-/* end of LAN register offsets and bit definitions */
-
-/* MAC Control and Status registers */
-#define MAC_CR			0x01  /* R/W */
-
-/* MAC_CR - MAC Control Register */
-#define MAC_CR_RXALL			0x80000000
-/* TODO: delete this bit? It is not described in the data sheet. */
-#define MAC_CR_HBDIS			0x10000000
-#define MAC_CR_RCVOWN			0x00800000
-#define MAC_CR_LOOPBK			0x00200000
-#define MAC_CR_FDPX			0x00100000
-#define MAC_CR_MCPAS			0x00080000
-#define MAC_CR_PRMS			0x00040000
-#define MAC_CR_INVFILT			0x00020000
-#define MAC_CR_PASSBAD			0x00010000
-#define MAC_CR_HFILT			0x00008000
-#define MAC_CR_HPFILT			0x00002000
-#define MAC_CR_LCOLL			0x00001000
-#define MAC_CR_BCAST			0x00000800
-#define MAC_CR_DISRTY			0x00000400
-#define MAC_CR_PADSTR			0x00000100
-#define MAC_CR_BOLMT_MASK		0x000000C0
-#define MAC_CR_DFCHK			0x00000020
-#define MAC_CR_TXEN			0x00000008
-#define MAC_CR_RXEN			0x00000004
-
-#define ADDRH			0x02	  /* R/W mask 0x0000FFFFUL */
-#define ADDRL			0x03	  /* R/W mask 0xFFFFFFFFUL */
-#define HASHH			0x04	  /* R/W */
-#define HASHL			0x05	  /* R/W */
-
-#define MII_ACC			0x06	  /* R/W */
-#define MII_ACC_PHY_ADDR		0x0000F800
-#define MII_ACC_MIIRINDA		0x000007C0
-#define MII_ACC_MII_WRITE		0x00000002
-#define MII_ACC_MII_BUSY		0x00000001
-
-#define MII_DATA		0x07	  /* R/W mask 0x0000FFFFUL */
-
-#define FLOW			0x08	  /* R/W */
-#define FLOW_FCPT			0xFFFF0000
-#define FLOW_FCPASS			0x00000004
-#define FLOW_FCEN			0x00000002
-#define FLOW_FCBSY			0x00000001
-
-#define VLAN1			0x09	  /* R/W mask 0x0000FFFFUL */
-#define VLAN1_VTI1			0x0000ffff
-
-#define VLAN2			0x0A	  /* R/W mask 0x0000FFFFUL */
-#define VLAN2_VTI2			0x0000ffff
-
-#define WUFF			0x0B	  /* WO */
-
-#define WUCSR			0x0C	  /* R/W */
-#define WUCSR_GUE			0x00000200
-#define WUCSR_WUFR			0x00000040
-#define WUCSR_MPR			0x00000020
-#define WUCSR_WAKE_EN			0x00000004
-#define WUCSR_MPEN			0x00000002
-
-/* Chip ID values */
-#define CHIP_9115	0x115
-#define CHIP_9116	0x116
-#define CHIP_9117	0x117
-#define CHIP_9118	0x118
-#define CHIP_9211	0x9211
-#define CHIP_9215	0x115a
-#define CHIP_9216	0x116a
-#define CHIP_9217	0x117a
-#define CHIP_9218	0x118a
-
-struct chip_id {
-	u16 id;
-	char *name;
-};
-
-static const struct chip_id chip_ids[] =  {
-	{ CHIP_9115, "LAN9115" },
-	{ CHIP_9116, "LAN9116" },
-	{ CHIP_9117, "LAN9117" },
-	{ CHIP_9118, "LAN9118" },
-	{ CHIP_9211, "LAN9211" },
-	{ CHIP_9215, "LAN9215" },
-	{ CHIP_9216, "LAN9216" },
-	{ CHIP_9217, "LAN9217" },
-	{ CHIP_9218, "LAN9218" },
-	{ 0, NULL },
-};
-
-#define DRIVERNAME "smc911x"
-
-u32 smc911x_get_mac_csr(u8 reg)
-{
-	while (smc911x_reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
-		;
-	smc911x_reg_write(MAC_CSR_CMD, MAC_CSR_CMD_CSR_BUSY | MAC_CSR_CMD_R_NOT_W | reg);
-	while (smc911x_reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
-		;
-
-	return smc911x_reg_read(MAC_CSR_DATA);
-}
-
-void smc911x_set_mac_csr(u8 reg, u32 data)
-{
-	while (smc911x_reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
-		;
-	smc911x_reg_write(MAC_CSR_DATA, data);
-	smc911x_reg_write(MAC_CSR_CMD, MAC_CSR_CMD_CSR_BUSY | reg);
-	while (smc911x_reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
-		;
-}
-
 static int smx911x_handle_mac_address(bd_t *bd)
 {
 	unsigned long addrh, addrl;
@@ -541,48 +146,6 @@ err_out:
 	printf(DRIVERNAME ": autonegotiation timed out\n");
 }
 
-static void smc911x_reset(void)
-{
-	int timeout;
-
-	/* Take out of PM setting first */
-	if (smc911x_reg_read(PMT_CTRL) & PMT_CTRL_READY) {
-		/* Write to the bytetest will take out of powerdown */
-		smc911x_reg_write(BYTE_TEST, 0x0);
-
-		timeout = 10;
-
-		while (timeout-- && !(smc911x_reg_read(PMT_CTRL) & PMT_CTRL_READY))
-			udelay(10);
-		if (!timeout) {
-			printf(DRIVERNAME
-				": timeout waiting for PM restore\n");
-			return;
-		}
-	}
-
-	/* Disable interrupts */
-	smc911x_reg_write(INT_EN, 0);
-
-	smc911x_reg_write(HW_CFG, HW_CFG_SRST);
-
-	timeout = 1000;
-	while (timeout-- && smc911x_reg_read(E2P_CMD) & E2P_CMD_EPC_BUSY)
-		udelay(10);
-
-	if (!timeout) {
-		printf(DRIVERNAME ": reset timeout\n");
-		return;
-	}
-
-	/* Reset the FIFO level and flow control settings */
-	smc911x_set_mac_csr(FLOW, FLOW_FCPT | FLOW_FCEN);
-	smc911x_reg_write(AFC_CFG, 0x0050287F);
-
-	/* Set to LED outputs */
-	smc911x_reg_write(GPIO_CFG, 0x70070000);
-}
-
 static void smc911x_enable(void)
 {
 	/* Enable TX */
@@ -601,26 +164,10 @@ static void smc911x_enable(void)
 
 int eth_init(bd_t *bd)
 {
-	unsigned long val, i;
-
 	printf(DRIVERNAME ": initializing\n");
 
-	val = smc911x_reg_read(BYTE_TEST);
-	if (val != 0x87654321) {
-		printf(DRIVERNAME ": Invalid chip endian 0x%08lx\n", val);
+	if (smc911x_detect_chip())
 		goto err_out;
-	}
-
-	val = smc911x_reg_read(ID_REV) >> 16;
-	for (i = 0; chip_ids[i].id != 0; i++) {
-		if (chip_ids[i].id == val) break;
-	}
-	if (!chip_ids[i].id) {
-		printf(DRIVERNAME ": Unknown chip ID %04lx\n", val);
-		goto err_out;
-	}
-
-	printf(DRIVERNAME ": detected %s controller\n", chip_ids[i].name);
 
 	smc911x_reset();