diff options
| author | Robert Marko <robert.marko@sartura.hr> | 2022-03-24 10:57:39 +0100 |
|---|---|---|
| committer | Stefan Roese <sr@denx.de> | 2022-04-21 12:31:36 +0200 |
| commit | 7001ea3ec408cbc801fc21054927ca1f4840ff79 (patch) | |
| tree | d6c62ee1277345a55835dbc5873c2cb810d03819 /configs | |
| parent | 9e778c7ffc3184bd538f2ff73d395df608d907e5 (diff) | |
| download | u-boot-7001ea3ec408cbc801fc21054927ca1f4840ff79.tar.gz u-boot-7001ea3ec408cbc801fc21054927ca1f4840ff79.tar.bz2 u-boot-7001ea3ec408cbc801fc21054927ca1f4840ff79.zip | |
mvebu: uDPU: update defconfig
Update the current uDPU defconfig with following changes:
* Disable CONFIG_SPI_BOOT, its not needed for booting and the device boots
from eMMC anyway.
* Disable CONFIG_SYS_CONSOLE_INFO_QUIET, there is no need to diverge from
other boards by not priting the console device
* Enable CONFIG_CMD_MTD in order to allow use of the MTD tool
* Disable CONFIG_CMD_MTDPARTS, with MTD now being able to parse partitions
from DTS there is no need for it, the default MTDPARTS were incorrect
anyway
* Enable CONFIG_MMC_HS200_SUPPORT, the eMMC used support both HS200 and
HS400 modes, so enable at least HS200 because Xenon driver does not
support HS400 currently
* Replace CONFIG_SPI_FLASH_BAR with CONFIG_SPI_FLASH_SFDP_SUPPORT
Utilize SFDP parsing instead of relying on the extended address registers
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Stefan Roese <sr@denx.de>
Diffstat (limited to 'configs')
| -rw-r--r-- | configs/uDPU_defconfig | 10 |
1 files changed, 4 insertions, 6 deletions
diff --git a/configs/uDPU_defconfig b/configs/uDPU_defconfig index 43c4bdfba1..c07bad5076 100644 --- a/configs/uDPU_defconfig +++ b/configs/uDPU_defconfig @@ -16,9 +16,8 @@ CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_FIT=y -CONFIG_SPI_BOOT=y +CONFIG_FIT_VERBOSE=y CONFIG_USE_PREBOOT=y -CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y @@ -33,6 +32,7 @@ CONFIG_CMD_FUSE=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_MTD=y CONFIG_CMD_PCI=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y @@ -42,9 +42,6 @@ CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y CONFIG_CMD_MVEBU_BUBT=y CONFIG_CMD_EXT4_WRITE=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nor0=spi0" -CONFIG_MTDPARTS_DEFAULT="mtdparts=spi0:4m(uboot),-(rootfs)" CONFIG_MAC_PARTITION=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y @@ -59,12 +56,13 @@ CONFIG_DM_I2C=y CONFIG_DM_I2C_GPIO=y CONFIG_SYS_I2C_MV=y CONFIG_MISC=y +CONFIG_MMC_HS200_SUPPORT=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_SDMA=y CONFIG_MMC_SDHCI_XENON=y CONFIG_MTD=y CONFIG_DM_MTD=y -CONFIG_SPI_FLASH_BAR=y +CONFIG_SPI_FLASH_SFDP_SUPPORT=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_SPI_FLASH_STMICRO=y |