Move all command code into its own directory

There are a lot of unrelated files in common, including all of the commands.
Moving them into their own directory makes them easier to find and is more
logical.

Some commands include non-command code, such as cmd_scsi.c. This should be
sorted out at some point so that the function can be enabled with or without
the associated command.

Unfortunately, with m68k I get this error:

m68k:  +   M5329AFEE
+arch/m68k/cpu/mcf532x/start.o: In function `_start':
+arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o

I hope someone can shed some light on what this means. I hope it isn't
depending on the position of code in the image.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>

1 files changed, 0 insertions, 346 deletions

diff --git a/common/cmd_pcmcia.c b/common/cmd_pcmcia.c
deleted file mode 100644
index 682d18f55d..0000000000
--- a/common/cmd_pcmcia.c
+++ /dev/null
@@ -1,346 +0,0 @@
-/*
- * (C) Copyright 2000-2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- *
- ********************************************************************
- *
- * Lots of code copied from:
- *
- * m8xx_pcmcia.c - Linux PCMCIA socket driver for the mpc8xx series.
- * (C) 1999-2000 Magnus Damm <damm@bitsmart.com>
- *
- * "The ExCA standard specifies that socket controllers should provide
- * two IO and five memory windows per socket, which can be independently
- * configured and positioned in the host address space and mapped to
- * arbitrary segments of card address space. " - David A Hinds. 1999
- *
- * This controller does _not_ meet the ExCA standard.
- *
- * m8xx pcmcia controller brief info:
- * + 8 windows (attrib, mem, i/o)
- * + up to two slots (SLOT_A and SLOT_B)
- * + inputpins, outputpins, event and mask registers.
- * - no offset register. sigh.
- *
- * Because of the lacking offset register we must map the whole card.
- * We assign each memory window PCMCIA_MEM_WIN_SIZE address space.
- * Make sure there is (PCMCIA_MEM_WIN_SIZE * PCMCIA_MEM_WIN_NO
- * * PCMCIA_SOCKETS_NO) bytes at PCMCIA_MEM_WIN_BASE.
- * The i/o windows are dynamically allocated at PCMCIA_IO_WIN_BASE.
- * They are maximum 64KByte each...
- */
-
-/* #define DEBUG	1	*/
-
-/*
- * PCMCIA support
- */
-#include <common.h>
-#include <command.h>
-#include <config.h>
-#include <pcmcia.h>
-#include <asm/io.h>
-
-/* -------------------------------------------------------------------- */
-
-#if defined(CONFIG_CMD_PCMCIA)
-
-extern int pcmcia_on (void);
-extern int pcmcia_off (void);
-
-int do_pinit (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	int rcode = 0;
-
-	if (argc != 2) {
-		printf ("Usage: pinit {on | off}\n");
-		return 1;
-	}
-	if (strcmp(argv[1],"on") == 0) {
-		rcode = pcmcia_on ();
-	} else if (strcmp(argv[1],"off") == 0) {
-		rcode = pcmcia_off ();
-	} else {
-		printf ("Usage: pinit {on | off}\n");
-		return 1;
-	}
-
-	return rcode;
-}
-
-U_BOOT_CMD(
-	pinit,	2,	0,	do_pinit,
-	"PCMCIA sub-system",
-	"on  - power on PCMCIA socket\n"
-	"pinit off - power off PCMCIA socket"
-);
-
-#endif
-
-/* -------------------------------------------------------------------- */
-
-#undef	CHECK_IDE_DEVICE
-
-#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
-#define	CHECK_IDE_DEVICE
-#endif
-
-#if	defined(CONFIG_PXA_PCMCIA)
-#define	CHECK_IDE_DEVICE
-#endif
-
-#ifdef	CHECK_IDE_DEVICE
-
-int		ide_devices_found;
-static uchar	*known_cards[] = {
-	(uchar *)"ARGOSY PnPIDE D5",
-	NULL
-};
-
-#define	MAX_TUPEL_SZ	512
-#define MAX_FEATURES	4
-
-#define MAX_IDENT_CHARS		64
-#define	MAX_IDENT_FIELDS	4
-
-#define	indent	"\t   "
-
-static void print_funcid (int func)
-{
-	puts (indent);
-	switch (func) {
-		case CISTPL_FUNCID_MULTI:
-			puts (" Multi-Function");
-			break;
-		case CISTPL_FUNCID_MEMORY:
-			puts (" Memory");
-			break;
-		case CISTPL_FUNCID_SERIAL:
-			puts (" Serial Port");
-			break;
-		case CISTPL_FUNCID_PARALLEL:
-			puts (" Parallel Port");
-			break;
-		case CISTPL_FUNCID_FIXED:
-			puts (" Fixed Disk");
-			break;
-		case CISTPL_FUNCID_VIDEO:
-			puts (" Video Adapter");
-			break;
-		case CISTPL_FUNCID_NETWORK:
-			puts (" Network Adapter");
-			break;
-		case CISTPL_FUNCID_AIMS:
-			puts (" AIMS Card");
-			break;
-		case CISTPL_FUNCID_SCSI:
-			puts (" SCSI Adapter");
-			break;
-		default:
-			puts (" Unknown");
-			break;
-	}
-	puts (" Card\n");
-}
-
-static void print_fixed (volatile uchar *p)
-{
-	if (p == NULL)
-		return;
-
-	puts(indent);
-
-	switch (*p) {
-		case CISTPL_FUNCE_IDE_IFACE:
-		{   uchar iface = *(p+2);
-
-		puts ((iface == CISTPL_IDE_INTERFACE) ? " IDE" : " unknown");
-		puts (" interface ");
-		break;
-		}
-		case CISTPL_FUNCE_IDE_MASTER:
-		case CISTPL_FUNCE_IDE_SLAVE:
-		{   uchar f1 = *(p+2);
-		uchar f2 = *(p+4);
-
-		puts ((f1 & CISTPL_IDE_SILICON) ? " [silicon]" : " [rotating]");
-
-		if (f1 & CISTPL_IDE_UNIQUE)
-			puts (" [unique]");
-
-		puts ((f1 & CISTPL_IDE_DUAL) ? " [dual]" : " [single]");
-
-		if (f2 & CISTPL_IDE_HAS_SLEEP)
-			puts (" [sleep]");
-
-		if (f2 & CISTPL_IDE_HAS_STANDBY)
-			puts (" [standby]");
-
-		if (f2 & CISTPL_IDE_HAS_IDLE)
-			puts (" [idle]");
-
-		if (f2 & CISTPL_IDE_LOW_POWER)
-			puts (" [low power]");
-
-		if (f2 & CISTPL_IDE_REG_INHIBIT)
-			puts (" [reg inhibit]");
-
-		if (f2 & CISTPL_IDE_HAS_INDEX)
-			puts (" [index]");
-
-		if (f2 & CISTPL_IDE_IOIS16)
-			puts (" [IOis16]");
-
-		break;
-		}
-	}
-	putc ('\n');
-}
-
-static int identify  (volatile uchar *p)
-{
-	uchar id_str[MAX_IDENT_CHARS];
-	uchar data;
-	uchar *t;
-	uchar **card;
-	int i, done;
-
-	if (p == NULL)
-		return (0);	/* Don't know */
-
-	t = id_str;
-	done =0;
-
-	for (i=0; i<=4 && !done; ++i, p+=2) {
-		while ((data = *p) != '\0') {
-			if (data == 0xFF) {
-				done = 1;
-				break;
-			}
-			*t++ = data;
-			if (t == &id_str[MAX_IDENT_CHARS-1]) {
-				done = 1;
-				break;
-			}
-			p += 2;
-		}
-		if (!done)
-			*t++ = ' ';
-	}
-	*t = '\0';
-	while (--t > id_str) {
-		if (*t == ' ')
-			*t = '\0';
-		else
-			break;
-	}
-	puts ((char *)id_str);
-	putc ('\n');
-
-	for (card=known_cards; *card; ++card) {
-		debug ("## Compare against \"%s\"\n", *card);
-		if (strcmp((char *)*card, (char *)id_str) == 0) {	/* found! */
-			debug ("## CARD FOUND ##\n");
-			return (1);
-		}
-	}
-
-	return (0);	/* don't know */
-}
-
-int check_ide_device (int slot)
-{
-	volatile uchar *ident = NULL;
-	volatile uchar *feature_p[MAX_FEATURES];
-	volatile uchar *p, *start, *addr;
-	int n_features = 0;
-	uchar func_id = ~0;
-	uchar code, len;
-	ushort config_base = 0;
-	int found = 0;
-	int i;
-
-	addr = (volatile uchar *)(CONFIG_SYS_PCMCIA_MEM_ADDR +
-				  CONFIG_SYS_PCMCIA_MEM_SIZE * (slot * 4));
-	debug ("PCMCIA MEM: %08lX\n", (ulong)addr);
-
-	start = p = (volatile uchar *) addr;
-
-	while ((p - start) < MAX_TUPEL_SZ) {
-
-		code = *p; p += 2;
-
-		if (code == 0xFF) { /* End of chain */
-			break;
-		}
-
-		len = *p; p += 2;
-#if defined(DEBUG) && (DEBUG > 1)
-		{ volatile uchar *q = p;
-			printf ("\nTuple code %02x  length %d\n\tData:",
-				code, len);
-
-			for (i = 0; i < len; ++i) {
-				printf (" %02x", *q);
-				q+= 2;
-			}
-		}
-#endif	/* DEBUG */
-		switch (code) {
-		case CISTPL_VERS_1:
-			ident = p + 4;
-			break;
-		case CISTPL_FUNCID:
-			/* Fix for broken SanDisk which may have 0x80 bit set */
-			func_id = *p & 0x7F;
-			break;
-		case CISTPL_FUNCE:
-			if (n_features < MAX_FEATURES)
-				feature_p[n_features++] = p;
-			break;
-		case CISTPL_CONFIG:
-			config_base = (*(p+6) << 8) + (*(p+4));
-			debug ("\n## Config_base = %04x ###\n", config_base);
-		default:
-			break;
-		}
-		p += 2 * len;
-	}
-
-	found = identify (ident);
-
-	if (func_id != ((uchar)~0)) {
-		print_funcid (func_id);
-
-		if (func_id == CISTPL_FUNCID_FIXED)
-			found = 1;
-		else
-			return (1);	/* no disk drive */
-	}
-
-	for (i=0; i<n_features; ++i) {
-		print_fixed (feature_p[i]);
-	}
-
-	if (!found) {
-		printf ("unknown card type\n");
-		return (1);
-	}
-
-	ide_devices_found |= (1 << slot);
-
-	/* set I/O area in config reg -> only valid for ARGOSY D5!!! */
-	*((uchar *)(addr + config_base)) = 1;
-#if 0
-	printf("\n## Config_base = %04x ###\n", config_base);
-	printf("Configuration Option Register: %02x @ %x\n", readb(addr + config_base), addr + config_base);
-	printf("Card Configuration and Status Register: %02x\n", readb(addr + config_base + 2));
-	printf("Pin Replacement Register Register: %02x\n", readb(addr + config_base + 4));
-	printf("Socket and Copy Register: %02x\n", readb(addr + config_base + 6));
-#endif
-	return (0);
-}
-
-#endif	/* CHECK_IDE_DEVICE */