powerpc: Partialy restore core of mpc8xx

CS Systemes d'Information (CSSI) manufactures 8xx boards for
critical communication systems. Those boards have been
running U-Boot since 2010 and will have to be maintained
until at least 2027.

commit 5b8e76c35ec312a3f73126bd1a2d2c0965b98a9f
("powerpc, 8xx: remove support for 8xx") orphaned those boards
by removing support for the mpc8xx CPU.

This commit partially restores support for the 8xx, with the
following limitations:
- Restores support for MPC866 and MPC885 only
- Does not restore IDE, PCMCIA, I2C, USB
- Does not restore examples
- Does not restore POST
- Does not restore Ethernet on SCC
- Does not restore console on SCC
- Does not restore bedbug and kgdb support

As the 866 and 885 do not support the following features,
they are not restored either:
- VIDEO / LCD
- RTC clock

The CPM uCODE patch is not restored either, because:
- 866 and 885 already have support for I2C and SPI relocation
without a uCODE patch
- relocation of SMC, I2C or SPI is only needed for using SCCs
for Ethernet or QMC

The dynamic setup/calculation of clocks is removed, we
expect the target being use with the clock and PLPRCR register
defined in the configuration.
All the clock settings for 8xx prior to 866 is removed as
well as we now only support 866 and 885.

This code is mature and addresses mature boards. Therefore
all code enclosed in '#if 0/#endif' and '#if XX_DEBUG/#endif'
is unneeded.

The following files are not restored by this patch:

- arch/powerpc/cpu/mpc8xx/bedbug_860.c
- arch/powerpc/cpu/mpc8xx/fec.h
- arch/powerpc/cpu/mpc8xx/kgdb.S
- arch/powerpc/cpu/mpc8xx/plprcr_write.S
- arch/powerpc/cpu/mpc8xx/scc.c
- arch/powerpc/cpu/mpc8xx/upatch.c
- arch/powerpc/cpu/mpc8xx/video.c
- arch/powerpc/include/asm/status_led.h
- arch/powerpc/lib/ide.c
- arch/powerpc/lib/ide.h
- doc/README.MPC866
- drivers/pcmcia/mpc8xx_pcmcia.c
- drivers/rtc/mpc8xx.c
- drivers/usb/gadget/mpc8xx_udc.c
- drivers/video/mpc8xx_lcd.c
- examples/standalone/test_burst.c
- examples/standalone/test_burst.h
- examples/standalone/test_burst_lib.S
- examples/standalone/timer.c
- include/mpc823_lcd.h
- include/usb/mpc8xx_udc.h
- post/cpu/mpc8xx/Makefile
- post/cpu/mpc8xx/cache.c
- post/cpu/mpc8xx/cache_8xx.S
- post/cpu/mpc8xx/ether.c
- post/cpu/mpc8xx/spr.c
- post/cpu/mpc8xx/uart.c
- post/cpu/mpc8xx/usb.c
- post/cpu/mpc8xx/watchdog.c

Some of the restored files are not located in a proper location.
In order to keep traceability of the changes, they will be
moved to their correct location and moved to Kconfig in a
followup patch.

This patch also declares CSSI as point of contact for the update
of the 8xx platform, as those boards are the only ones still
being maintained on the 8xx area. A later patch will add
those boards to the tree.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>

2 files changed, 58 insertions, 3 deletions

diff --git a/cmd/bdinfo.c b/cmd/bdinfo.c
index 401a694712..8971697e60 100644
--- a/cmd/bdinfo.c
+++ b/cmd/bdinfo.c
@@ -180,7 +180,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	print_bi_flash(bd);
 	print_num("sramstart",		bd->bi_sramstart);
 	print_num("sramsize",		bd->bi_sramsize);
-#if	defined(CONFIG_E500)
+#if	defined(CONFIG_8xx) || defined(CONFIG_E500)
 	print_num("immr_base",		bd->bi_immr_base);
 #endif
 	print_num("bootflags",		bd->bi_bootflags);
diff --git a/cmd/reginfo.c b/cmd/reginfo.c
index 8e4bec8c4b..850f28cabc 100644
--- a/cmd/reginfo.c
+++ b/cmd/reginfo.c
@@ -7,7 +7,9 @@
 
 #include <common.h>
 #include <command.h>
-#if defined(CONFIG_MPC86xx)
+#if defined(CONFIG_8xx)
+#include <mpc8xx.h>
+#elif defined(CONFIG_MPC86xx)
 extern void mpc86xx_reginfo(void);
 #elif defined(CONFIG_MPC85xx)
 extern void mpc85xx_reginfo(void);
@@ -16,7 +18,60 @@ extern void mpc85xx_reginfo(void);
 static int do_reginfo(cmd_tbl_t *cmdtp, int flag, int argc,
 		       char * const argv[])
 {
-#if defined(CONFIG_MPC86xx)
+#if defined(CONFIG_8xx)
+	volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+	volatile sysconf8xx_t *sysconf = &immap->im_siu_conf;
+	volatile sit8xx_t *timers = &immap->im_sit;
+
+	/* Hopefully more PowerPC  knowledgable people will add code to display
+	 * other useful registers
+	 */
+
+	printf ("\nSystem Configuration registers\n"
+
+		"\tIMMR\t0x%08X\n", get_immr(0));
+
+	printf("\tSIUMCR\t0x%08X", sysconf->sc_siumcr);
+	printf("\tSYPCR\t0x%08X\n",sysconf->sc_sypcr);
+
+	printf("\tSWT\t0x%08X",    sysconf->sc_swt);
+	printf("\tSWSR\t0x%04X\n", sysconf->sc_swsr);
+
+	printf("\tSIPEND\t0x%08X\tSIMASK\t0x%08X\n",
+		sysconf->sc_sipend, sysconf->sc_simask);
+	printf("\tSIEL\t0x%08X\tSIVEC\t0x%08X\n",
+		sysconf->sc_siel, sysconf->sc_sivec);
+	printf("\tTESR\t0x%08X\tSDCR\t0x%08X\n",
+		sysconf->sc_tesr, sysconf->sc_sdcr);
+
+	printf ("Memory Controller Registers\n"
+
+		"\tBR0\t0x%08X\tOR0\t0x%08X \n", memctl->memc_br0, memctl->memc_or0);
+	printf("\tBR1\t0x%08X\tOR1\t0x%08X \n", memctl->memc_br1, memctl->memc_or1);
+	printf("\tBR2\t0x%08X\tOR2\t0x%08X \n", memctl->memc_br2, memctl->memc_or2);
+	printf("\tBR3\t0x%08X\tOR3\t0x%08X \n", memctl->memc_br3, memctl->memc_or3);
+	printf("\tBR4\t0x%08X\tOR4\t0x%08X \n", memctl->memc_br4, memctl->memc_or4);
+	printf("\tBR5\t0x%08X\tOR5\t0x%08X \n", memctl->memc_br5, memctl->memc_or5);
+	printf("\tBR6\t0x%08X\tOR6\t0x%08X \n", memctl->memc_br6, memctl->memc_or6);
+	printf("\tBR7\t0x%08X\tOR7\t0x%08X \n", memctl->memc_br7, memctl->memc_or7);
+	printf ("\n"
+		"\tmamr\t0x%08X\tmbmr\t0x%08X \n",
+		memctl->memc_mamr, memctl->memc_mbmr );
+	printf("\tmstat\t0x%08X\tmptpr\t0x%08X \n",
+		memctl->memc_mstat, memctl->memc_mptpr );
+	printf("\tmdr\t0x%08X \n", memctl->memc_mdr);
+
+	printf ("\nSystem Integration Timers\n"
+		"\tTBSCR\t0x%08X\tRTCSC\t0x%08X \n",
+		timers->sit_tbscr, timers->sit_rtcsc);
+	printf("\tPISCR\t0x%08X \n", timers->sit_piscr);
+
+	/*
+	 * May be some CPM info here?
+	 */
+
+#elif defined(CONFIG_MPC86xx)
 	mpc86xx_reginfo();
 
 #elif defined(CONFIG_MPC85xx)