nhk8815: remove platform.S, which was unused at link time

This source file, which I got by the vendor in their own port,
was not actually executing because lib-based compilation
didn't call lowlevel_init (we have CONFIG_SKIP_LOWLEVEL_INIT).
With the change to object-based linking, an undefined symbol in
this file started hitting in the final link.

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>

2 files changed, 1 insertions, 341 deletions

diff --git a/board/st/nhk8815/Makefile b/board/st/nhk8815/Makefile
index 3f360dcf29..60b87b1920 100644
--- a/board/st/nhk8815/Makefile
+++ b/board/st/nhk8815/Makefile
@@ -30,7 +30,7 @@ include $(TOPDIR)/config.mk
 LIB	= $(obj)lib$(BOARD).o
 
 COBJS	:= nhk8815.o
-SOBJS	:= platform.o
+SOBJS	:=
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/st/nhk8815/platform.S b/board/st/nhk8815/platform.S
deleted file mode 100644
index 2a67110231..0000000000
--- a/board/st/nhk8815/platform.S
+++ /dev/null
@@ -1,340 +0,0 @@
-/*
- * Board specific setup info
- *
- * (C) Copyright 2005
- * STMicrolelctronics, <www.st.com>
- *
- * (C) Copyright 2004, ARM Ltd.
- * Philippe Robin, <philippe.robin@arm.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-
-.globl lowlevel_init
-lowlevel_init:
-	/* Jump to the flash address */
-	ldr r0, =CFG_ONENAND_BASE
-
-	/*
-	 * Make it independent whether we boot from 0x0 or 0x30000000.
-	 * Non-portable: it relies on the knowledge that ip has to be updated
-	 */
-	orr ip, ip, r0	/* adjust return address of cpu_init_crit */
-	orr lr, lr, r0	/* adjust return address */
-	orr pc, pc, r0	/* jump to the normal address */
-	nop
-
-	/* Initialize PLL, Remap clear, FSMC, MPMC here! */
-	/* What about GPIO, CLCD and UART */
-
-	/* PLL Initialization */
-	/* Prog the PLL1 @ 266 MHz ==> SDRAM Clock = 100.8 MHz */
-	ldr r0, =NOMADIK_SRC_BASE
-
-	ldr r1, =0x2B013502
-
-	str r1, [r0, #0x14]
-
-	/* Used to set all the timers clock to 2.4MHZ */
-	ldr r1, =0x2AAAA004
-	str r1, [r0]
-
-	ldr r1, =0x10000000
-	str r1, [r0, #0x10]
-
-	/* FSMC setup ---- */
-	ldr r0, =NOMADIK_FSMC_BASE
-
-	ldr r1, =0x10DB		/* For 16-bit NOR flash */
-	str r1, [r0, #0x08]
-
-	ldr r1, =0x03333333	/* For 16-bit NOR flash */
-	str r1, [r0, #0xc]
-
-	/* oneNAND setting */
-	ldr r1, =0x0000105B	/* BCR0 Prog control register */
-	str r1, [r0]
-
-	ldr r1, =0x0A200551	/* BTR0 Prog timing register */
-	str r1, [r0, #0x04]
-
-	/* preload the instructions into icache */
-	add r0, pc, #0x1F
-	bic r0, r0, #0x1F
-	mcr p15, 0, r0, c7, c13, 1
-	add r0, r0, #0x20
-	mcr p15, 0, r0, c7, c13, 1
-
-	/* Now Clear Remap */
-	ldr r0, =NOMADIK_SRC_BASE
-
-	ldr r1, =0x2004
-	str r1, [r0]
-
-	ldr r1, =0x10000000
-	str r1, [r0, #0x10]
-
-	ldr r0, =0x101E9000
-	ldr r1, =0x2004
-	str r1, [r0]
-
-	ldr r0, =NOMADIK_SRC_BASE
-	ldr r1, =0x2104
-	str r1, [r0]
-
-	/* FSMC setup -- */
-	mov r0, #(NOMADIK_FSMC_BASE & 0x10000000)
-	orr r0, r0, #(NOMADIK_FSMC_BASE & 0x0FFFFFFF)
-
-	ldr r1, =0x10DB		/* For 16-bit NOR flash */
-	str r1, [r0, #0x8]
-
-	ldr r1, =0x03333333	/* For 16-bit NOR flash */
-	str r1, [r0, #0xc]
-
-	/* MPMC Setup */
-	ldr r0, =NOMADIK_MPMC_BASE
-
-	ldr r1, =0xF00003
-	str r1, [r0]		/* Enable the MPMC and the DLL */
-
-	ldr r1, =0x183
-	str r1, [r0, #0x20]
-
-	ldr r2, =NOMADIK_PMU_BASE
-
-	ldr r1, =0x1111
-	str r1, [r2]
-
-	ldr r1, =0x1111		/* Prog the, mand delay strategy */
-	str r1, [r0, #0x28]
-
-	ldr r1, =0x103		/* NOP ,mand */
-	str r1, [r0, #0x20]
-
-	/* FIXME -- Wait required here */
-
-	ldr r1, =0x103		/* PALL ,mand*/
-	str r1, [r0, #0x20]
-
-	ldr r1, =0x1
-	str r1, [r0, #0x24]	/* To do at least two auto-refresh */
-
-	/* FIXME -- Wait required here */
-
-	/* Auto-refresh period = 7.8us @ SDRAM Clock = 100.8 MHz */
-	ldr r1, =0x31
-	str r1, [r0, #0x24]
-
-	/* Prog Little Endian, Not defined in 8800 board */
-	ldr r1, =0x0
-	str r1,	[r0, #0x8]
-
-
-	ldr r1, =0x2
-	str r1, [r0, #0x30]		/* Prog tRP timing */
-
-	ldr r1, =0x4			/* Change for 8815 */
-	str r1, [r0, #0x34]		/* Prog tRAS timing */
-
-	ldr r1, =0xB
-	str r1, [r0, #0x38]		/* Prog tSREX timing */
-
-
-	ldr r1, =0x1
-	str r1, [r0, #0x44]		/* Prog tWR timing */
-
-	ldr r1, =0x8
-	str r1, [r0, #0x48]		/* Prog tRC timing */
-
-	ldr r1, =0xA
-	str r1, [r0, #0x4C]		/* Prog tRFC timing */
-
-	ldr r1, =0xB
-	str r1, [r0, #0x50]		/* Prog tXSR timing */
-
-	ldr r1, =0x1
-	str r1, [r0, #0x54]		/* Prog tRRD timing */
-
-	ldr r1, =0x1
-	str r1, [r0, #0x58]		/* Prog tMRD timing */
-
-	ldr r1, =0x1
-	str r1, [r0, #0x5C]		/* Prog tCDLR timing */
-
-	/* DDR-SDRAM MEMORY IS ON BANK0 8815 */
-	ldr r1, =0x304			/* Prog RAS and CAS for CS 0 */
-	str r1, [r0, #0x104]
-
-	/* SDR-SDRAM MEMORY IS ON BANK1 8815 */
-	ldr r1, =0x304			/* Prog RAS and CAS for CS 1 */
-	str r1, [r0, #0x124]
-	/* THE DATA BUS WIDE IS PROGRAM FOR 16-BITS */
-	/* DDR-SDRAM MEMORY IS ON BANK0*/
-
-	ldr r1, =0x884			/* 8815 : config reg in BRC for CS0 */
-	str r1, [r0, #0x100]
-
-	/*SDR-SDRAM MEMORY IS ON BANK1*/
-
-	ldr r1, =0x884			/* 8815 : config reg in BRC for CS1 */
-	str r1, [r0, #0x120]
-
-	ldr r1, =0x83			/*MODE Mand*/
-	str r1, [r0, #0x20]
-
-	/* LOAD MODE REGISTER FOR 2 bursts of 16b, with DDR mem ON BANK0 */
-
-	ldr r1, =0x62000			/*Data in*/
-	ldr r1, [r1]
-
-	/* LOAD MODE REGISTER FOR 2 bursts of 16b, with DDR mem ON BANK1 */
-
-	ldr r1, =0x8062000
-	ldr r1, [r1]
-
-	ldr r1, =0x003
-	str r1, [r0, #0x20]
-
-	/* ENABLE ALL THE BUFFER FOR EACH AHB PORT*/
-
-	ldr r1, =0x01			/* Enable buffer 0 */
-	str r1, [r0, #0x400]
-
-	ldr r1, =0x01			/* Enable buffer 1 */
-	str r1, [r0, #0x420]
-
-	ldr r1, =0x01			/* Enable buffer 2 */
-	str r1, [r0, #0x440]
-
-	ldr r1, =0x01			/* Enable buffer 3 */
-	str r1, [r0, #0x460]
-
-	ldr r1, =0x01			/* Enable buffer 4 */
-	str r1, [r0, #0x480]
-
-	ldr r1, =0x01			/* Enable buffer 5 */
-	str r1, [r0, #0x4A0]
-
-	/* GPIO settings */
-
-	ldr r0, =NOMADIK_GPIO1_BASE
-
-	ldr r1, =0xC0600000
-	str r1, [r0, #0x20]
-
-	ldr r1, =0x3F9FFFFF		/* ABHI change this for uart1 */
-	str r1, [r0, #0x24]
-
-	ldr r1, =0x3F9FFFFF		/* ABHI change this for uart1 */
-	str r1, [r0, #0x28]
-
-	ldr r0, =NOMADIK_GPIO0_BASE
-
-	ldr r1, =0xFFFFFFFF
-	str r1, [r0, #0x20]
-
-	ldr r1, =0x00
-	str r1, [r0, #0x24]
-
-	ldr r1, =0x00
-	str r1, [r0, #0x28]
-
-	/* Configure CPLD_CTRL register for enabling MUX logic for UART0/UART2 */
-
-	ldr r0, =NOMADIK_FSMC_BASE
-
-	ldr r1, =0x10DB			/* INIT FSMC bank 0 */
-	str r1, [r0, #0x00]
-
-	ldr r1, =0x0FFFFFFF
-	str r1, [r0, #0x04]
-
-	ldr r1, =0x010DB		/* INIT FSMC bank 1 */
-	str r1, [r0, #0x08]
-
-	ldr r1, =0x00FFFFFFF
-	str r1, [r0, #0x0C]
-
-	ldr r0, =NOMADIK_UART0_BASE
-
-	ldr r1, =0x00000000
-	str r1, [r0, #0x30]
-
-	ldr r1, =0x0000004e
-	str r1, [r0, #0x24]
-
-	ldr r1, =0x00000008
-	str r1, [r0, #0x28]
-
-	ldr r1, =0x00000060
-	str r1, [r0, #0x2C]
-
-	ldr r1, =0x00000301
-	str r1, [r0, #0x30]
-
-	ldr r1, =0x00000066
-	str r1, [r0]
-
-	ldr r0, =NOMADIK_UART1_BASE
-
-	ldr r1, =0x00000000
-	str r1, [r0, #0x30]
-
-	ldr r1, =0x0000004e
-	str r1, [r0, #0x24]
-
-	ldr r1, =0x00000008
-	str r1, [r0, #0x28]
-
-	ldr r1, =0x00000060
-	str r1, [r0, #0x2C]
-
-	ldr r1, =0x00000301
-	str r1, [r0, #0x30]
-
-	ldr r1, =0x00000066
-	str r1, [r0]
-
-	ldr r0, =NOMADIK_UART2_BASE
-
-	ldr r1, =0x00000000
-	str r1, [r0, #0x30]
-
-	ldr r1, =0x0000004e
-	str r1, [r0, #0x24]
-
-	ldr r1, =0x00000008
-	str r1, [r0, #0x28]
-
-	ldr r1, =0x00000060
-	str r1, [r0, #0x2C]
-
-	ldr r1, =0x00000301
-	str r1, [r0, #0x30]
-
-	ldr r1, =0x00000066
-	str r1, [r0]
-
-	/* Configure CPLD to enable UART0 */
-
-	mov pc, lr