powerpc: mpc824x: remove MPC824X cpu support

All the MPC824X boards are still non-generic boards:
A3000, CPC45, CU824, eXalion, MVBLUE, MUSENKI, Sandpoint824x, utx8245

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Josef Wagner <Wagner@Microsys.de>
Cc: Torsten Demke <torsten.demke@fci.com>
Cc: Jim Thompson <jim@musenki.com>
Cc: Greg Allen <gallen@arlut.utexas.edu>

8 files changed, 0 insertions, 1375 deletions

diff --git a/board/sandpoint/Kconfig b/board/sandpoint/Kconfig
deleted file mode 100644
index c19b63e183..0000000000
--- a/board/sandpoint/Kconfig
+++ /dev/null
@@ -1,19 +0,0 @@
-if TARGET_SANDPOINT8240
-
-config SYS_BOARD
-	default "sandpoint"
-
-config SYS_CONFIG_NAME
-	default "Sandpoint8240"
-
-endif
-
-if TARGET_SANDPOINT8245
-
-config SYS_BOARD
-	default "sandpoint"
-
-config SYS_CONFIG_NAME
-	default "Sandpoint8245"
-
-endif
diff --git a/board/sandpoint/MAINTAINERS b/board/sandpoint/MAINTAINERS
deleted file mode 100644
index 569cf42e10..0000000000
--- a/board/sandpoint/MAINTAINERS
+++ /dev/null
@@ -1,12 +0,0 @@
-SANDPOINT BOARD
-M:	Wolfgang Denk <wd@denx.de>
-S:	Maintained
-F:	board/sandpoint/
-F:	include/configs/Sandpoint8240.h
-F:	configs/Sandpoint8240_defconfig
-
-SANDPOINT8245 BOARD
-#M:	Jim Thompson <jim@musenki.com>
-S:	Orphan (since 2014-04)
-F:	include/configs/Sandpoint8245.h
-F:	configs/Sandpoint8245_defconfig
diff --git a/board/sandpoint/Makefile b/board/sandpoint/Makefile
deleted file mode 100644
index 58f5a8905b..0000000000
--- a/board/sandpoint/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= sandpoint.o flash.o
diff --git a/board/sandpoint/README b/board/sandpoint/README
deleted file mode 100644
index c9996a8c06..0000000000
--- a/board/sandpoint/README
+++ /dev/null
@@ -1,411 +0,0 @@
-This port of U-Boot will run on a Motorola Sandpoint 3 development
-system equipped with a Unity X4 PPMC card (MPC8240 CPU) only. It is a
-snapshot of work in progress and far from being completed. In order
-to run it on the target system, it has to be downloaded using the
-DINK32 monitor program that came with your Sandpoint system. Please
-note that DINK32 does not accept the S-Record file created by the
-U-Boot build process unmodified, because it contains CR/LF line
-terminators. You have to strip the CR characters first. There is a
-tiny script named 'dinkdl' I created for this purpose.
-
-The Sandpoint port is based on the work of Rob Taylor, who does not
-seem to maintain it any more. I can be reached by mail as
-tkoeller@gmx.net.
-
-Thomas Koeller
-
-
-The port was tested on a Sandpoint 8240 X3 board, with U-Boot
-installed in the flash memory of the CPU card. Please use the
-following DIP switch settings:
-
-Motherboard:
-
-SW1.1: on	SW1.2: on	SW1.3: on	SW1.4: on
-SW1.5: on	SW1.6: on	SW1.7: on	SW1.8: on
-
-SW2.1: on	SW2.2: on	SW2.3: on	SW2.4: on
-SW2.5: on	SW2.6: on	SW2.7: on	SW2.8: on
-
-
-CPU Card:
-
-SW2.1: OFF	SW2.2: OFF	SW2.3: on	SW2.4: on
-SW2.5: OFF	SW2.6: OFF	SW2.7: OFF	SW2.8: OFF
-
-SW3.1: OFF	SW3.2: on	SW3.3: OFF	SW3.4: OFF
-SW3.5: on	SW3.6: OFF	SW3.7: OFF	SW3.8: on
-
-
-The followind detailed description of installation and initial steps
-with U-Boot and QNX was provided by Jim Sandoz <sandoz@lucent.com>:
-
-
-Directions for installing U-Boot on Sandpoint+Unity8240
-using the Abatron BDI2000 BDM/JTAG debugger ...
-
-Background and Reference info:
-http://u-boot.sourceforge.net/
-http://www.abatron.ch/
-http://www.abatron.ch/BDI/bdihw.html
-http://www.abatron.ch/DataSheets/BDI2000.pdf
-http://www.abatron.ch/Manuals/ManGdbCOP-2000C.pdf
-http://e-www.motorola.com/collateral/SPX3UM.pdf
-http://e-www.motorola.com/collateral/UNITYX4CONFIG.pdf
-
-
-Connection Diagram:
-					    ===========
- ===                     =====             |-----      |
-|   | <---------------> |     |            |     |     |
-|PC |       rs232       | BDI |=============[]   |     |
-|   |                   |2000 |  BDM probe |     |     |
-|   | <---------------> |     |            |-----      |
- ===       ethernet      =====             |           |
-					   |           |
-					    ===========
-					 Sandpoint X3 with
-					  Unity 8240 proc
-
-
-PART 1)
-  DIP Switch Settings:
-
-Sandpoint X3 8240 processor board DIP switch settings, with
-U-Boot to be installed in the flash memory of the CPU card:
-
-Motorola Sandpoint X3 Motherboard:
-SW1.1: on	SW1.2: on	SW1.3: on	SW1.4: on
-SW1.5: on	SW1.6: on	SW1.7: on	SW1.8: on
-SW2.1: on	SW2.2: on	SW2.3: on	SW2.4: on
-SW2.5: on	SW2.6: on	SW2.7: on	SW2.8: on
-
-Motorola Unity 8240 CPU Card:
-SW2.1: OFF	SW2.2: OFF	SW2.3: on	SW2.4: on
-SW2.5: OFF	SW2.6: OFF	SW2.7: OFF	SW2.8: OFF
-SW3.1: OFF	SW3.2: on	SW3.3: OFF	SW3.4: OFF
-SW3.5: on	SW3.6: OFF	SW3.7: OFF	SW3.8: on
-
-
-PART 2)
-  Connect the BDI2000 Cable to the Sandpoint/Unity 8240:
-
-BDM Pin 1 on the Unity 8240 processor board is towards the
-PCI PMC connectors, or away from the socketed SDRAM, i.e.:
-
-  ====================
-  | ---------------- |
-  | |    SDRAM     | |
-  | |              | |
-  | ---------------- |
-  | |~|              |
-  | |B|       ++++++ |
-  | |D|       + uP + |
-  | |M|       +8240+ |
-  |  ~ 1      ++++++ |
-  |                  |
-  |                  |
-  |                  |
-  | PMC conn ======  |
-  |   =====  ======  |
-  |                  |
-  ====================
-
-
-PART 3)
-  Setting up the BDI2000, and preparing for TCP/IP network comms:
-
-Connect the BDI2000 to the PC using the supplied serial cable.
-Download the BDI2000 software and install it using setup.exe.
-
-[Note: of course you  can  also  use  the  Linux  command  line  tool
-"bdisetup"  to  configure  your BDI2000 - the sources are included on
-the floppy disk that comes with your BDI2000. Just in case you  don't
-have any Windows PC's - like me :-)   -- wd ]
-
-Power up the BDI2000; then follow directions to assign the IP
-address and related network information.  Note that U-Boot
-will be loaded to the Sandpoint via tftp.  You need to either
-use the Abatron-provided tftp application or provide a tftp
-server (e.g. Linux/Solaris/*BSD) somewhere on your network.
-Once the IP address etc are assigned via the RS232 port,
-further communication with the BDI2000 will happen via the
-ethernet connection.
-
-PART 4)
-  Making a TCP/IP network connection to the Abatron BDI2000:
-
-Telnet to the Abatron BDI2000.  Assuming that all of the
-networking info was loaded via RS232 correctly, you will see
-the following (scrolling):
-
-- TARGET: waiting for target Vcc
-- TARGET: waiting for target Vcc
-
-
-PART 5)
-  Power up the target Sandpoint:
-If the BDM connections are correct, the following will now appear:
-
-- TARGET: waiting for target Vcc
-- TARGET: waiting for target Vcc
-- TARGET: processing power-up delay
-- TARGET: processing user reset request
-- BDI asserts HRESET
-- Reset JTAG controller passed
-- Bypass check: 0x55 => 0xAA
-- Bypass check: 0x55 => 0xAA
-- JTAG exists check passed
-- Target PVR is 0x00810101
-- COP status is 0x01
-- Check running state passed
-- BDI scans COP freeze command
-- BDI removes HRESET
-- COP status is 0x05
-- Check stopped state passed
-- Check LSRL length passed
-- BDI sets breakpoint at 0xFFF00100
-- BDI resumes program execution
-- Waiting for target stop passed
-- TARGET: Target PVR is 0x00810101
-- TARGET: reseting target passed
-- TARGET: processing target startup ....
-- TARGET: processing target startup passed
-BDI>
-
-
-PART 6)
-  Erase the current contents of the flash memory:
-
-BDI>era 0xFFF00000
-    Erasing flash at 0xfff00000
-    Erasing flash passed
-BDI>era 0xFFF04000
-    Erasing flash at 0xfff04000
-    Erasing flash passed
-BDI>era 0xFFF06000
-    Erasing flash at 0xfff06000
-    Erasing flash passed
-BDI>era 0xFFF08000
-    Erasing flash at 0xfff08000
-    Erasing flash passed
-BDI>era 0xFFF10000
-    Erasing flash at 0xfff10000
-    Erasing flash passed
-BDI>era 0xFFF20000
-    Erasing flash at 0xfff20000
-    Erasing flash passed
-
-
-PART 7)
-  Program the flash memory with the U-Boot image:
-
-BDI>prog 0xFFF00000 u-boot.bin bin
-    Programming u-boot.bin , please wait ....
-    Programming flash passed
-
-
-PART 8)
-  Connect PC to Sandpoint:
-Using a crossover serial cable, attach the PC serial port to the
-Sandpoint's COM1.  Set communications parameters to 8N1 / 9600 baud.
-
-
-PART 9)
-  Reset the Unity and begin U-Boot execution:
-
-BDI>reset
-- TARGET: processing user reset request
-- TARGET: Target PVR is 0x00810101
-- TARGET: reseting target passed
-- TARGET: processing target init list ....
-- TARGET: processing target init list passed
-
-BDI>go
-
-Now see output from U-Boot running, sent via serial port:
-
-U-Boot 1.1.4 (Jan 23 2002 - 18:29:19)
-
-CPU:   MPC8240 Revision 1.1 at 264 MHz: 16 kB I-Cache 16 kB D-Cache
-Board: Sandpoint 8240 Unity
-DRAM:  64 MB
-FLASH:  2 MB
-PCI:    scanning bus0 ...
-  bus dev fn venID devID class  rev MBAR0    MBAR1    IPIN ILINE
-  00  00  00 1057  0003  060000 13  00000008 00000000 01   00
-  00  0b  00 10ad  0565  060100 10  00000000 00000000 00   00
-  00  0f  00 8086  1229  020000 08  80000000 80000001 01   00
-In:    serial
-Out:   serial
-Err:   serial
-=>
-
-
-PART 10)
-  Set and save any required environmental variables, examples of some:
-
-=> setenv ethaddr 00:03:47:97:D0:79
-=> setenv bootfile your_qnx_image_here
-=> setenv hostname sandpointX
-=> setenv netmask 255.255.255.0
-=> setenv ipaddr 192.168.0.11
-=> setenv serverip 192.168.0.10
-=> setenv gatewayip=192.168.0.1
-=> saveenv
-Saving Environment to Flash...
-Un-Protected 1 sectors
-Erasing Flash...
- done
-Erased 1 sectors
-Writing to Flash... done
-Protected 1 sectors
-=>
-
-**** Example environment: ****
-
-=> printenv
-baudrate=9600
-bootfile=telemetry
-hostname=sp1
-ethaddr=00:03:47:97:E4:6B
-load=tftp 100000 u-boot.bin
-update=protect off all;era FFF00000 FFF3FFFF;cp.b 100000 FFF00000 ${filesize};saveenv
-filesize=1f304
-gatewayip=145.17.228.1
-netmask=255.255.255.0
-ipaddr=145.17.228.42
-serverip=145.17.242.46
-stdin=serial
-stdout=serial
-stderr=serial
-
-Environment size: 332/8188 bytes
-=>
-
-here's some text useful stuff for cut-n-paste:
-setenv hostname sandpoint1
-setenv netmask 255.255.255.0
-setenv ipaddr 145.17.228.81
-setenv serverip 145.17.242.46
-setenv gatewayip 145.17.228.1
-saveenv
-
-PART 11)
-  Test U-Boot by tftp'ing new U-Boot, overwriting current:
-
-=> protect off all
-Un-Protect Flash Bank # 1
-=> tftp 100000 u-boot.bin
-eth: Intel i82559 PCI EtherExpressPro @0x80000000(bus=0, device=15, func=0)
-ARP broadcast 1
-TFTP from server 145.17.242.46; our IP address is 145.17.228.42; sending through
- gateway 145.17.228.1
-Filename 'u-boot.bin'.
-Load address: 0x100000
-Loading: #########################
-done
-Bytes transferred = 127628 (1f28c hex)
-=> era all
-Erase Flash Bank # 1
- done
-Erase Flash Bank # 2 - missing
-=> cp.b 0x100000 FFF00000 1f28c
-Copy to Flash... done
-=> saveenv
-Saving Environment to Flash...
-Un-Protected 1 sectors
-Erasing Flash...
- done
-Erased 1 sectors
-Writing to Flash... done
-Protected 1 sectors
-=> reset
-
-You can put these commands into some environment variables;
-
-=> setenv load tftp 100000 u-boot.bin
-=> setenv update protect off all\;era FFF00000 FFF3FFFF\;cp.b 100000 FFF00000 \${filesize}\;saveenv
-=> saveenv
-
-Then you just have to type "run load" then "run update"
-
-=> run load
-eth: Intel i82559 PCI EtherExpressPro @0x80000000(bus=0, device=15, func=0)
-ARP broadcast 1
-TFTP from server 145.17.242.46; our IP address is 145.17.228.42; sending through
- gateway 145.17.228.1
-Filename 'u-boot.bin'.
-Load address: 0x100000
-Loading: #########################
-done
-Bytes transferred = 127748 (1f304 hex)
-=> run update
-Un-Protect Flash Bank # 1
-Un-Protect Flash Bank # 2
-Erase Flash from 0xfff00000 to 0xfff3ffff
- done
-Erased 7 sectors
-Copy to Flash... done
-Saving Environment to Flash...
-Un-Protected 1 sectors
-Erasing Flash...
- done
-Erased 1 sectors
-Writing to Flash... done
-Protected 1 sectors
-=>
-
-
-PART 12)
-  Load OS image (ELF format) via U-Boot using tftp
-
-
-=> tftp 800000 sandpoint-simple.elf
-eth: Intel i82559 PCI EtherExpressPro @0x80000000(bus=0, device=15, func=0)
-ARP broadcast 1
-TFTP from server 145.17.242.46; our IP address is 145.17.228.42; sending through
- gateway 145.17.228.1
-Filename 'sandpoint-simple.elf'.
-Load address: 0x800000
-Loading: #################################################################
-	 #################################################################
-	 #################################################################
-	 ########################
-done
-Bytes transferred = 1120284 (11181c hex)
-==>
-
-PART 13)
-  Begin OS image execution: (note that unless you have the
-serial parameters of your OS image set to 9600 (i.e. same as
-the U-Boot binary) you will get garbage here until you change
-the serial communications speed.
-
-=> bootelf 800000
-Loading  @ 0x001f0100 (1120028 bytes)
-## Starting application at 0x001f1d28 ...
-Replace init_hwinfo() with a board specific version
-
-Loading QNX6....
-
-Header size=0x0000009c, Total Size=0x000005c0, #Cpu=1, Type=1
-<...loader and kernel messages snipped...>
-
-Welcome to Neutrino on the Sandpoint
-#
-
-
-other information:
-
-CVS Retrieval Notes:
-
-U-Boot's SourceForge CVS repository can be checked out
-through anonymous (pserver) CVS with the following
-instruction set. The module you wish to check out must
-be specified as the modulename. When prompted for a
-password for anonymous, simply press the Enter key.
-
-cvs -d:pserver:anonymous@cvs.u-boot.sourceforge.net:/cvsroot/u-boot login
-
-cvs -z6 -d:pserver:anonymous@cvs.u-boot.sourceforge.net:/cvsroot/u-boot co -P u-boot
diff --git a/board/sandpoint/dinkdl b/board/sandpoint/dinkdl
deleted file mode 100644
index f281452eb3..0000000000
--- a/board/sandpoint/dinkdl
+++ /dev/null
@@ -1,2 +0,0 @@
-#! /bin/bash
-tr -d "\r" <$1 >/dev/tts/1
diff --git a/board/sandpoint/flash.c b/board/sandpoint/flash.c
deleted file mode 100644
index 1ab668ce8a..0000000000
--- a/board/sandpoint/flash.c
+++ /dev/null
@@ -1,748 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc824x.h>
-#include <asm/processor.h>
-#include <asm/pci_io.h>
-#include <w83c553f.h>
-
-#define ROM_CS0_START	0xFF800000
-#define ROM_CS1_START	0xFF000000
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips    */
-
-#if defined(CONFIG_ENV_IS_IN_FLASH)
-# ifndef  CONFIG_ENV_ADDR
-#  define CONFIG_ENV_ADDR  (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
-# endif
-# ifndef  CONFIG_ENV_SIZE
-#  define CONFIG_ENV_SIZE  CONFIG_ENV_SECT_SIZE
-# endif
-# ifndef  CONFIG_ENV_SECT_SIZE
-#  define CONFIG_ENV_SECT_SIZE  CONFIG_ENV_SIZE
-# endif
-#endif
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-#if 0
-static void flash_get_offsets (ulong base, flash_info_t *info);
-#endif /* 0 */
-
-/*flash command address offsets*/
-
-#if 0
-#define ADDR0           (0x555)
-#define ADDR1           (0x2AA)
-#define ADDR3           (0x001)
-#else
-#define ADDR0		(0xAAA)
-#define ADDR1		(0x555)
-#define ADDR3		(0x001)
-#endif
-
-#define FLASH_WORD_SIZE unsigned char
-
-/*-----------------------------------------------------------------------
- */
-
-#if 0
-static int byte_parity_odd(unsigned char x) __attribute__ ((const));
-#endif /* 0 */
-static unsigned long flash_id(unsigned char mfct, unsigned char chip) __attribute__ ((const));
-
-typedef struct
-{
-  FLASH_WORD_SIZE extval;
-  unsigned short intval;
-} map_entry;
-
-#if 0
-static int
-byte_parity_odd(unsigned char x)
-{
-  x ^= x >> 4;
-  x ^= x >> 2;
-  x ^= x >> 1;
-  return (x & 0x1) != 0;
-}
-#endif /* 0 */
-
-
-static unsigned long
-flash_id(unsigned char mfct, unsigned char chip)
-{
-  static const map_entry mfct_map[] =
-    {
-      {(FLASH_WORD_SIZE) AMD_MANUFACT,	(unsigned short) ((unsigned long) FLASH_MAN_AMD >> 16)},
-      {(FLASH_WORD_SIZE) FUJ_MANUFACT,	(unsigned short) ((unsigned long) FLASH_MAN_FUJ >> 16)},
-      {(FLASH_WORD_SIZE) STM_MANUFACT,	(unsigned short) ((unsigned long) FLASH_MAN_STM >> 16)},
-      {(FLASH_WORD_SIZE) MT_MANUFACT,	(unsigned short) ((unsigned long) FLASH_MAN_MT >> 16)},
-      {(FLASH_WORD_SIZE) INTEL_MANUFACT,(unsigned short) ((unsigned long) FLASH_MAN_INTEL >> 16)},
-      {(FLASH_WORD_SIZE) INTEL_ALT_MANU,(unsigned short) ((unsigned long) FLASH_MAN_INTEL >> 16)}
-    };
-
-  static const map_entry chip_map[] =
-  {
-    {AMD_ID_F040B,	FLASH_AM040},
-    {(FLASH_WORD_SIZE) STM_ID_x800AB,	FLASH_STM800AB}
-  };
-
-  const map_entry *p;
-  unsigned long result = FLASH_UNKNOWN;
-
-  /* find chip id */
-  for(p = &chip_map[0]; p < &chip_map[sizeof chip_map / sizeof chip_map[0]]; p++)
-    if(p->extval == chip)
-    {
-      result = FLASH_VENDMASK | p->intval;
-      break;
-    }
-
-  /* find vendor id */
-  for(p = &mfct_map[0]; p < &mfct_map[sizeof mfct_map / sizeof mfct_map[0]]; p++)
-    if(p->extval == mfct)
-    {
-      result &= ~FLASH_VENDMASK;
-      result |= (unsigned long) p->intval << 16;
-      break;
-    }
-
-  return result;
-}
-
-
-unsigned long
-flash_init(void)
-{
-  unsigned long i;
-  unsigned char j;
-  static const ulong flash_banks[] = CONFIG_SYS_FLASH_BANKS;
-
-  /* Init: no FLASHes known */
-  for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++)
-  {
-    flash_info_t * const pflinfo = &flash_info[i];
-    pflinfo->flash_id = FLASH_UNKNOWN;
-    pflinfo->size = 0;
-    pflinfo->sector_count = 0;
-  }
-
-  /* Enable writes to Sandpoint flash */
-  {
-    register unsigned char temp;
-    CONFIG_READ_BYTE(CONFIG_SYS_WINBOND_ISA_CFG_ADDR + WINBOND_CSCR, temp);
-    temp &= ~0x20; /* clear BIOSWP bit */
-    CONFIG_WRITE_BYTE(CONFIG_SYS_WINBOND_ISA_CFG_ADDR + WINBOND_CSCR, temp);
-  }
-
-  for(i = 0; i < sizeof flash_banks / sizeof flash_banks[0]; i++)
-  {
-    flash_info_t * const pflinfo = &flash_info[i];
-    const unsigned long base_address = flash_banks[i];
-    volatile FLASH_WORD_SIZE * const flash = (FLASH_WORD_SIZE *) base_address;
-#if 0
-    volatile FLASH_WORD_SIZE * addr2;
-#endif
-#if 0
-    /* write autoselect sequence */
-    flash[0x5555] = 0xaa;
-    flash[0x2aaa] = 0x55;
-    flash[0x5555] = 0x90;
-#else
-    flash[0xAAA << (3 * i)] = 0xaa;
-    flash[0x555 << (3 * i)] = 0x55;
-    flash[0xAAA << (3 * i)] = 0x90;
-#endif
-    __asm__ __volatile__("sync");
-
-#if 0
-    pflinfo->flash_id = flash_id(flash[0x0], flash[0x1]);
-#else
-    pflinfo->flash_id = flash_id(flash[0x0], flash[0x2 + 14 * i]);
-#endif
-
-    switch(pflinfo->flash_id & FLASH_TYPEMASK)
-    {
-      case FLASH_AM040:
-	pflinfo->size = 0x00080000;
-	pflinfo->sector_count = 8;
-	for(j = 0; j < 8; j++)
-	{
-	  pflinfo->start[j] = base_address + 0x00010000 * j;
-	  pflinfo->protect[j] = flash[(j << 16) | 0x2];
-	}
-	break;
-      case FLASH_STM800AB:
-	pflinfo->size = 0x00100000;
-	pflinfo->sector_count = 19;
-	pflinfo->start[0] = base_address;
-	pflinfo->start[1] = base_address + 0x4000;
-	pflinfo->start[2] = base_address + 0x6000;
-	pflinfo->start[3] = base_address + 0x8000;
-	for(j = 1; j < 16; j++)
-	{
-	  pflinfo->start[j+3] = base_address + 0x00010000 * j;
-	}
-#if 0
-	/* check for protected sectors */
-	for (j = 0; j < pflinfo->sector_count; j++) {
-	  /* read sector protection at sector address, (A7 .. A0) = 0x02 */
-	  /* D0 = 1 if protected */
-	  addr2 = (volatile FLASH_WORD_SIZE *)(pflinfo->start[j]);
-	    if (pflinfo->flash_id & FLASH_MAN_SST)
-	      pflinfo->protect[j] = 0;
-	    else
-	      pflinfo->protect[j] = addr2[2] & 1;
-	}
-#endif
-	break;
-    }
-    /* Protect monitor and environment sectors
-     */
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
-    flash_protect(FLAG_PROTECT_SET,
-		CONFIG_SYS_MONITOR_BASE,
-		CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
-		&flash_info[0]);
-#endif
-
-#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR)
-    flash_protect(FLAG_PROTECT_SET,
-		CONFIG_ENV_ADDR,
-		CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
-		&flash_info[0]);
-#endif
-
-    /* reset device to read mode */
-    flash[0x0000] = 0xf0;
-    __asm__ __volatile__("sync");
-  }
-
-    return flash_info[0].size + flash_info[1].size;
-}
-
-#if 0
-static void
-flash_get_offsets (ulong base, flash_info_t *info)
-{
-    int i;
-
-    /* set up sector start address table */
-	if (info->flash_id & FLASH_MAN_SST)
-	  {
-	    for (i = 0; i < info->sector_count; i++)
-	      info->start[i] = base + (i * 0x00010000);
-	  }
-	else
-    if (info->flash_id & FLASH_BTYPE) {
-	/* set sector offsets for bottom boot block type    */
-	info->start[0] = base + 0x00000000;
-	info->start[1] = base + 0x00004000;
-	info->start[2] = base + 0x00006000;
-	info->start[3] = base + 0x00008000;
-	for (i = 4; i < info->sector_count; i++) {
-	    info->start[i] = base + (i * 0x00010000) - 0x00030000;
-	}
-    } else {
-	/* set sector offsets for top boot block type       */
-	i = info->sector_count - 1;
-	info->start[i--] = base + info->size - 0x00004000;
-	info->start[i--] = base + info->size - 0x00006000;
-	info->start[i--] = base + info->size - 0x00008000;
-	for (; i >= 0; i--) {
-	    info->start[i] = base + i * 0x00010000;
-	}
-    }
-
-}
-#endif /* 0 */
-
-/*-----------------------------------------------------------------------
- */
-void
-flash_print_info(flash_info_t *info)
-{
-  static const char unk[] = "Unknown";
-  const char *mfct = unk, *type = unk;
-  unsigned int i;
-
-  if(info->flash_id != FLASH_UNKNOWN)
-  {
-    switch(info->flash_id & FLASH_VENDMASK)
-    {
-      case FLASH_MAN_AMD:	mfct = "AMD";				break;
-      case FLASH_MAN_FUJ:	mfct = "FUJITSU";			break;
-      case FLASH_MAN_STM:	mfct = "STM";				break;
-      case FLASH_MAN_SST:	mfct = "SST";				break;
-      case FLASH_MAN_BM:	mfct = "Bright Microelectonics";	break;
-      case FLASH_MAN_INTEL:	mfct = "Intel";				break;
-    }
-
-    switch(info->flash_id & FLASH_TYPEMASK)
-    {
-      case FLASH_AM040:		type = "AM29F040B (512K * 8, uniform sector size)";	break;
-      case FLASH_AM400B:	type = "AM29LV400B (4 Mbit, bottom boot sect)";		break;
-      case FLASH_AM400T:	type = "AM29LV400T (4 Mbit, top boot sector)";		break;
-      case FLASH_AM800B:	type = "AM29LV800B (8 Mbit, bottom boot sect)";		break;
-      case FLASH_AM800T:	type = "AM29LV800T (8 Mbit, top boot sector)";		break;
-      case FLASH_AM160T:	type = "AM29LV160T (16 Mbit, top boot sector)";		break;
-      case FLASH_AM320B:	type = "AM29LV320B (32 Mbit, bottom boot sect)";	break;
-      case FLASH_AM320T:	type = "AM29LV320T (32 Mbit, top boot sector)";		break;
-      case FLASH_STM800AB:	type = "M29W800AB (8 Mbit, bottom boot sect)";		break;
-      case FLASH_SST800A:	type = "SST39LF/VF800 (8 Mbit, uniform sector size)";	break;
-      case FLASH_SST160A:	type = "SST39LF/VF160 (16 Mbit, uniform sector size)";	break;
-    }
-  }
-
-  printf(
-    "\n  Brand: %s Type: %s\n"
-    "  Size: %lu KB in %d Sectors\n",
-    mfct,
-    type,
-    info->size >> 10,
-    info->sector_count
-  );
-
-  printf ("  Sector Start Addresses:");
-
-  for (i = 0; i < info->sector_count; i++)
-  {
-    unsigned long size;
-    unsigned int erased;
-    unsigned long * flash = (unsigned long *) info->start[i];
-
-    /*
-     * Check if whole sector is erased
-     */
-    size =
-      (i != (info->sector_count - 1)) ?
-      (info->start[i + 1] - info->start[i]) >> 2 :
-      (info->start[0] + info->size - info->start[i]) >> 2;
-
-    for(
-      flash = (unsigned long *) info->start[i], erased = 1;
-      (flash != (unsigned long *) info->start[i] + size) && erased;
-      flash++
-    )
-      erased = *flash == ~0x0UL;
-
-    printf(
-      "%s %08lX %s %s",
-      (i % 5) ? "" : "\n   ",
-      info->start[i],
-      erased ? "E" : " ",
-      info->protect[i] ? "RO" : "  "
-    );
-  }
-
-  puts("\n");
-  return;
-}
-
-#if 0
-
-/*
- * The following code cannot be run from FLASH!
- */
-ulong
-flash_get_size (vu_long *addr, flash_info_t *info)
-{
-   short i;
-    FLASH_WORD_SIZE value;
-    ulong base = (ulong)addr;
-	volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)addr;
-
-    printf("flash_get_size: \n");
-    /* Write auto select command: read Manufacturer ID */
-    eieio();
-    addr2[ADDR0] = (FLASH_WORD_SIZE)0xAA;
-    addr2[ADDR1] = (FLASH_WORD_SIZE)0x55;
-    addr2[ADDR0] = (FLASH_WORD_SIZE)0x90;
-    value = addr2[0];
-
-    switch (value) {
-    case (FLASH_WORD_SIZE)AMD_MANUFACT:
-	info->flash_id = FLASH_MAN_AMD;
-	break;
-    case (FLASH_WORD_SIZE)FUJ_MANUFACT:
-	info->flash_id = FLASH_MAN_FUJ;
-	break;
-    case (FLASH_WORD_SIZE)SST_MANUFACT:
-	info->flash_id = FLASH_MAN_SST;
-	break;
-    default:
-	info->flash_id = FLASH_UNKNOWN;
-	info->sector_count = 0;
-	info->size = 0;
-	return (0);         /* no or unknown flash  */
-    }
-    printf("recognised manufacturer");
-
-    value = addr2[ADDR3];          /* device ID        */
-	debug ("\ndev_code=%x\n", value);
-
-    switch (value) {
-    case (FLASH_WORD_SIZE)AMD_ID_LV400T:
-	info->flash_id += FLASH_AM400T;
-	info->sector_count = 11;
-	info->size = 0x00080000;
-	break;              /* => 0.5 MB        */
-
-    case (FLASH_WORD_SIZE)AMD_ID_LV400B:
-	info->flash_id += FLASH_AM400B;
-	info->sector_count = 11;
-	info->size = 0x00080000;
-	break;              /* => 0.5 MB        */
-
-    case (FLASH_WORD_SIZE)AMD_ID_LV800T:
-	info->flash_id += FLASH_AM800T;
-	info->sector_count = 19;
-	info->size = 0x00100000;
-	break;              /* => 1 MB      */
-
-    case (FLASH_WORD_SIZE)AMD_ID_LV800B:
-	info->flash_id += FLASH_AM800B;
-	info->sector_count = 19;
-	info->size = 0x00100000;
-	break;              /* => 1 MB      */
-
-    case (FLASH_WORD_SIZE)AMD_ID_LV160T:
-	info->flash_id += FLASH_AM160T;
-	info->sector_count = 35;
-	info->size = 0x00200000;
-	break;              /* => 2 MB      */
-
-    case (FLASH_WORD_SIZE)AMD_ID_LV160B:
-	info->flash_id += FLASH_AM160B;
-	info->sector_count = 35;
-	info->size = 0x00200000;
-	break;              /* => 2 MB      */
-
-    case (FLASH_WORD_SIZE)SST_ID_xF800A:
-	info->flash_id += FLASH_SST800A;
-	info->sector_count = 16;
-	info->size = 0x00100000;
-	break;              /* => 1 MB      */
-
-    case (FLASH_WORD_SIZE)SST_ID_xF160A:
-	info->flash_id += FLASH_SST160A;
-	info->sector_count = 32;
-	info->size = 0x00200000;
-	break;              /* => 2 MB      */
-
-    case (FLASH_WORD_SIZE)AMD_ID_F040B:
-	info->flash_id += FLASH_AM040;
-	info->sector_count = 8;
-	info->size = 0x00080000;
-	break;              /* => 0.5 MB      */
-
-    default:
-	info->flash_id = FLASH_UNKNOWN;
-	return (0);         /* => no or unknown flash */
-
-    }
-
-    printf("flash id %lx; sector count %x, size %lx\n", info->flash_id,info->sector_count,info->size);
-    /* set up sector start address table */
-	if (info->flash_id & FLASH_MAN_SST)
-	  {
-	    for (i = 0; i < info->sector_count; i++)
-	      info->start[i] = base + (i * 0x00010000);
-	  }
-	else
-    if (info->flash_id & FLASH_BTYPE) {
-	/* set sector offsets for bottom boot block type    */
-	info->start[0] = base + 0x00000000;
-	info->start[1] = base + 0x00004000;
-	info->start[2] = base + 0x00006000;
-	info->start[3] = base + 0x00008000;
-	for (i = 4; i < info->sector_count; i++) {
-	    info->start[i] = base + (i * 0x00010000) - 0x00030000;
-	}
-    } else {
-	/* set sector offsets for top boot block type       */
-	i = info->sector_count - 1;
-	info->start[i--] = base + info->size - 0x00004000;
-	info->start[i--] = base + info->size - 0x00006000;
-	info->start[i--] = base + info->size - 0x00008000;
-	for (; i >= 0; i--) {
-	    info->start[i] = base + i * 0x00010000;
-	}
-    }
-
-    /* check for protected sectors */
-    for (i = 0; i < info->sector_count; i++) {
-	/* read sector protection at sector address, (A7 .. A0) = 0x02 */
-	/* D0 = 1 if protected */
-	addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]);
-		if (info->flash_id & FLASH_MAN_SST)
-		  info->protect[i] = 0;
-		else
-		  info->protect[i] = addr2[2] & 1;
-    }
-
-    /*
-     * Prevent writes to uninitialized FLASH.
-     */
-    if (info->flash_id != FLASH_UNKNOWN) {
-       addr2 = (FLASH_WORD_SIZE *)info->start[0];
-	*addr2 = (FLASH_WORD_SIZE)0x00F000F0;   /* reset bank */
-    }
-
-    return (info->size);
-}
-
-#endif
-
-
-int
-flash_erase(flash_info_t *info, int s_first, int s_last)
-{
-    volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[0]);
-    int flag, prot, sect, l_sect;
-    ulong start, now, last;
-    unsigned char sh8b;
-
-    if ((s_first < 0) || (s_first > s_last)) {
-	if (info->flash_id == FLASH_UNKNOWN) {
-	    printf ("- missing\n");
-	} else {
-	    printf ("- no sectors to erase\n");
-	}
-	return 1;
-    }
-
-    if ((info->flash_id == FLASH_UNKNOWN) ||
-	(info->flash_id > (FLASH_MAN_STM | FLASH_AMD_COMP))) {
-	printf ("Can't erase unknown flash type - aborted\n");
-	return 1;
-    }
-
-    prot = 0;
-    for (sect=s_first; sect<=s_last; ++sect) {
-	if (info->protect[sect]) {
-	    prot++;
-	}
-    }
-
-    if (prot) {
-	printf ("- Warning: %d protected sectors will not be erased!\n",
-	    prot);
-    } else {
-	printf ("\n");
-    }
-
-    l_sect = -1;
-
-    /* Check the ROM CS */
-    if ((info->start[0] >= ROM_CS1_START) && (info->start[0] < ROM_CS0_START))
-      sh8b = 3;
-    else
-      sh8b = 0;
-
-    /* Disable interrupts which might cause a timeout here */
-    flag = disable_interrupts();
-
-    addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00AA00AA;
-    addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE)0x00550055;
-    addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00800080;
-    addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00AA00AA;
-    addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE)0x00550055;
-
-    /* Start erase on unprotected sectors */
-    for (sect = s_first; sect<=s_last; sect++) {
-	if (info->protect[sect] == 0) { /* not protected */
-	    addr = (FLASH_WORD_SIZE *)(info->start[0] + (
-				(info->start[sect] - info->start[0]) << sh8b));
-			if (info->flash_id & FLASH_MAN_SST)
-			  {
-			    addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00AA00AA;
-			    addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE)0x00550055;
-			    addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00800080;
-			    addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00AA00AA;
-			    addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE)0x00550055;
-			    addr[0] = (FLASH_WORD_SIZE)0x00500050;  /* block erase */
-			    udelay(30000);  /* wait 30 ms */
-			  }
-			else
-			  addr[0] = (FLASH_WORD_SIZE)0x00300030;  /* sector erase */
-	    l_sect = sect;
-	}
-    }
-
-    /* re-enable interrupts if necessary */
-    if (flag)
-	enable_interrupts();
-
-    /* wait at least 80us - let's wait 1 ms */
-    udelay (1000);
-
-    /*
-     * We wait for the last triggered sector
-     */
-    if (l_sect < 0)
-	goto DONE;
-
-    start = get_timer (0);
-    last  = start;
-    addr = (FLASH_WORD_SIZE *)(info->start[0] + (
-			(info->start[l_sect] - info->start[0]) << sh8b));
-    while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
-	if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-	    printf ("Timeout\n");
-	    return 1;
-	}
-	/* show that we're waiting */
-	if ((now - last) > 1000) {  /* every second */
-	    serial_putc ('.');
-	    last = now;
-	}
-    }
-
-DONE:
-    /* reset to read mode */
-    addr = (FLASH_WORD_SIZE *)info->start[0];
-    addr[0] = (FLASH_WORD_SIZE)0x00F000F0;  /* reset bank */
-
-    printf (" done\n");
-    return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-    ulong cp, wp, data;
-    int i, l, rc;
-
-    wp = (addr & ~3);   /* get lower word aligned address */
-
-    /*
-     * handle unaligned start bytes
-     */
-    if ((l = addr - wp) != 0) {
-	data = 0;
-	for (i=0, cp=wp; i<l; ++i, ++cp) {
-	    data = (data << 8) | (*(uchar *)cp);
-	}
-	for (; i<4 && cnt>0; ++i) {
-	    data = (data << 8) | *src++;
-	    --cnt;
-	    ++cp;
-	}
-	for (; cnt==0 && i<4; ++i, ++cp) {
-	    data = (data << 8) | (*(uchar *)cp);
-	}
-
-	if ((rc = write_word(info, wp, data)) != 0) {
-	    return (rc);
-	}
-	wp += 4;
-    }
-
-    /*
-     * handle word aligned part
-     */
-    while (cnt >= 4) {
-	data = 0;
-	for (i=0; i<4; ++i) {
-	    data = (data << 8) | *src++;
-	}
-	if ((rc = write_word(info, wp, data)) != 0) {
-	    return (rc);
-	}
-	wp  += 4;
-	cnt -= 4;
-    }
-
-    if (cnt == 0) {
-	return (0);
-    }
-
-    /*
-     * handle unaligned tail bytes
-     */
-    data = 0;
-    for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
-	data = (data << 8) | *src++;
-	--cnt;
-    }
-    for (; i<4; ++i, ++cp) {
-	data = (data << 8) | (*(uchar *)cp);
-    }
-
-    return (write_word(info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t *info, ulong dest, ulong data)
-{
-	volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)info->start[0];
-	volatile FLASH_WORD_SIZE *dest2;
-	volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *)&data;
-    ulong start;
-    int flag;
-	int i;
-    unsigned char sh8b;
-
-    /* Check the ROM CS */
-    if ((info->start[0] >= ROM_CS1_START) && (info->start[0] < ROM_CS0_START))
-      sh8b = 3;
-    else
-      sh8b = 0;
-
-    dest2 = (FLASH_WORD_SIZE *)(((dest - info->start[0]) << sh8b) +
-				info->start[0]);
-
-    /* Check if Flash is (sufficiently) erased */
-    if ((*dest2 & (FLASH_WORD_SIZE)data) != (FLASH_WORD_SIZE)data) {
-	return (2);
-    }
-    /* Disable interrupts which might cause a timeout here */
-    flag = disable_interrupts();
-
-	for (i=0; i<4/sizeof(FLASH_WORD_SIZE); i++)
-	  {
-	    addr2[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00AA00AA;
-	    addr2[ADDR1 << sh8b] = (FLASH_WORD_SIZE)0x00550055;
-	    addr2[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00A000A0;
-
-	    dest2[i << sh8b] = data2[i];
-
-	    /* re-enable interrupts if necessary */
-	    if (flag)
-	      enable_interrupts();
-
-	    /* data polling for D7 */
-	    start = get_timer (0);
-	    while ((dest2[i << sh8b] & (FLASH_WORD_SIZE)0x00800080) !=
-		   (data2[i] & (FLASH_WORD_SIZE)0x00800080)) {
-	      if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-		return (1);
-	      }
-	    }
-	  }
-
-    return (0);
-}
-
-/*-----------------------------------------------------------------------
- */
diff --git a/board/sandpoint/sandpoint.c b/board/sandpoint/sandpoint.c
deleted file mode 100644
index 16237bd524..0000000000
--- a/board/sandpoint/sandpoint.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * (C) Copyright 2000
- * Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc824x.h>
-#include <pci.h>
-#include <netdev.h>
-
-int checkboard (void)
-{
-	/*TODO: Check processor type */
-
-	puts (	"Board: Sandpoint "
-#ifdef CONFIG_MPC8240
-		"8240"
-#endif
-#ifdef CONFIG_MPC8245
-		"8245"
-#endif
-		" Unity ##Test not implemented yet##\n");
-	return 0;
-}
-
-#if 0	/* NOT USED */
-int checkflash (void)
-{
-	/* TODO: XXX XXX XXX */
-	printf ("## Test not implemented yet ##\n");
-
-	return (0);
-}
-#endif
-
-phys_size_t initdram (int board_type)
-{
-	long size;
-	long new_bank0_end;
-	long mear1;
-	long emear1;
-
-	size = get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM_SIZE);
-
-	new_bank0_end = size - 1;
-	mear1 = mpc824x_mpc107_getreg(MEAR1);
-	emear1 = mpc824x_mpc107_getreg(EMEAR1);
-	mear1 = (mear1  & 0xFFFFFF00) |
-		((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT);
-	emear1 = (emear1 & 0xFFFFFF00) |
-		((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT);
-	mpc824x_mpc107_setreg(MEAR1, mear1);
-	mpc824x_mpc107_setreg(EMEAR1, emear1);
-
-	return (size);
-}
-
-/*
- * Initialize PCI Devices, report devices found.
- */
-#ifndef CONFIG_PCI_PNP
-static struct pci_config_table pci_sandpoint_config_table[] = {
-	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0f, PCI_ANY_ID,
-	  pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
-				       PCI_ENET0_MEMADDR,
-				       PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
-	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x10, PCI_ANY_ID,
-	  pci_cfgfunc_config_device, { PCI_ENET1_IOADDR,
-				       PCI_ENET1_MEMADDR,
-				       PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
-	{ }
-};
-#endif
-
-struct pci_controller hose = {
-#ifndef CONFIG_PCI_PNP
-	config_table: pci_sandpoint_config_table,
-#endif
-};
-
-void pci_init_board(void)
-{
-	pci_mpc824x_init(&hose);
-}
-
-int board_eth_init(bd_t *bis)
-{
-	return pci_eth_init(bis);
-}
diff --git a/board/sandpoint/u-boot.lds b/board/sandpoint/u-boot.lds
deleted file mode 100644
index cd9f07c511..0000000000
--- a/board/sandpoint/u-boot.lds
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * (C) Copyright 2001-2007
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    arch/powerpc/cpu/mpc824x/start.o	(.text*)
-    *(.text.v*printf)
-
-    . = DEFINED(env_offset) ? env_offset : .;
-    common/env_embedded.o	(.ppcenv*)
-
-    *(.text*)
-    . = ALIGN(16);
-    *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-  }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    _GOT2_TABLE_ = .;
-    KEEP(*(.got2))
-    KEEP(*(.got))
-    PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
-    _FIXUP_TABLE_ = .;
-    KEEP(*(.fixup))
-  }
-  __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
-  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
-  .data    :
-  {
-    *(.data*)
-    *(.sdata*)
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-
-  . = ALIGN(4);
-  .u_boot_list : {
-	KEEP(*(SORT(.u_boot_list*)));
-  }
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss (NOLOAD)       :
-  {
-   *(.bss*)
-   *(.sbss*)
-   *(COMMON)
-   . = ALIGN(4);
-  }
-  __bss_end = . ;
-  PROVIDE (end = .);
-}