diff options
| author | Prabhakar Kushwaha <prabhakar@freescale.com> | 2014-10-29 22:33:09 +0530 |
|---|---|---|
| committer | York Sun <yorksun@freescale.com> | 2014-12-05 08:06:08 -0800 |
| commit | 9f074e67f5a2131336ff1838f2a82e0c2e15d33c (patch) | |
| tree | 8c84aabef031962bc68e57740e9cebd54ffb6523 /board/freescale/t104xrdb/spl.c | |
| parent | 1b2af9b4e23d396dca3eaa06fc9804659d22df0d (diff) | |
| download | u-boot-9f074e67f5a2131336ff1838f2a82e0c2e15d33c.tar.gz u-boot-9f074e67f5a2131336ff1838f2a82e0c2e15d33c.tar.bz2 u-boot-9f074e67f5a2131336ff1838f2a82e0c2e15d33c.zip | |
powerpc/mpc85xx:Put errata number for T104x NAND boot issue
When device is configured to load RCW from NAND flash IFC_A[16:31] are driven
low after RCW loading. Hence Devices connected on IFC_CS[1:7] and using
IFC_A[16:31] lines are not accessible.
Workaround is already in-place.
Put the errata number to adhere errata handling framework.
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
Diffstat (limited to 'board/freescale/t104xrdb/spl.c')
| -rw-r--r-- | board/freescale/t104xrdb/spl.c | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/board/freescale/t104xrdb/spl.c b/board/freescale/t104xrdb/spl.c index 3822a37738..75d9d9c5fa 100644 --- a/board/freescale/t104xrdb/spl.c +++ b/board/freescale/t104xrdb/spl.c @@ -34,12 +34,12 @@ unsigned long get_board_ddr_clk(void) void board_init_f(ulong bootflag) { u32 plat_ratio, sys_clk, uart_clk; -#ifdef CONFIG_SPL_NAND_BOOT +#if defined(CONFIG_SPL_NAND_BOOT) && defined(CONFIG_A008044_WORKAROUND) u32 porsr1, pinctl; #endif ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; -#ifdef CONFIG_SPL_NAND_BOOT +#if defined(CONFIG_SPL_NAND_BOOT) && defined(CONFIG_A008044_WORKAROUND) /* * There is T1040 SoC issue where NOR, FPGA are inaccessible during * NAND boot because IFC signals > IFC_AD7 are not enabled. |