imx6: aristainetos: add support for rev C board

add support for revision C boards. This board has
no longer a NAND.

Signed-off-by: Heiko Schocher <hs@denx.de>

8 files changed, 416 insertions, 0 deletions

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index fb2e1d31a3..fd165844e4 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -582,6 +582,8 @@ dtb-y += \
 	imx6dl-aristainetos2b_7.dtb \
 	imx6dl-aristainetos2b_csl_4.dtb \
 	imx6dl-aristainetos2b_csl_7.dtb \
+	imx6dl-aristainetos2c_4.dtb \
+	imx6dl-aristainetos2c_7.dtb \
 	imx6dl-brppt2.dtb \
 	imx6dl-dhcom-pdk2.dtb \
 	imx6dl-icore.dtb \
diff --git a/arch/arm/dts/imx6dl-aristainetos2c_4-u-boot.dtsi b/arch/arm/dts/imx6dl-aristainetos2c_4-u-boot.dtsi
new file mode 100644
index 0000000000..052d51852b
--- /dev/null
+++ b/arch/arm/dts/imx6dl-aristainetos2c_4-u-boot.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0+ or X11
+/*
+ * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
+ */
+
+#include <imx6qdl-aristainetos2c-u-boot.dtsi>
+
+&lcd_panel {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu_disp>;
+	enable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+	backlight = <&backlight>;
+};
diff --git a/arch/arm/dts/imx6dl-aristainetos2c_4.dts b/arch/arm/dts/imx6dl-aristainetos2c_4.dts
new file mode 100644
index 0000000000..142b108ace
--- /dev/null
+++ b/arch/arm/dts/imx6dl-aristainetos2c_4.dts
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: (GPL-2.0)
+/*
+ * support for the imx6 based aristainetos2c board
+ * parts for 4.3 inch LG display on spi1 port1
+ *
+ * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
+ *
+ */
+/dts-v1/;
+
+#include "imx6dl-aristainetos2_4.dtsi"
+#include "imx6qdl-aristainetos2c.dtsi"
+
+/ {
+	model = "aristainetos2c i.MX6 Dual Lite Board 4";
+	compatible = "fsl,imx6dl";
+
+};
+
+&ecspi1 {
+	lcd_panel: display@0 {
+		compatible = "lg,lg4573";
+		spi-max-frequency = <10000000>;
+		reg = <1>;
+		power-on-delay = <10>;
+
+		display-timings {
+			480x800p57 {
+				native-mode;
+				clock-frequency = <27000027>;
+				hactive = <480>;
+				vactive = <800>;
+				hfront-porch = <10>;
+				hback-porch = <59>;
+				hsync-len = <10>;
+				vback-porch = <15>;
+				vfront-porch = <15>;
+				vsync-len = <15>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+			};
+		};
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/dts/imx6dl-aristainetos2c_7-u-boot.dtsi b/arch/arm/dts/imx6dl-aristainetos2c_7-u-boot.dtsi
new file mode 100644
index 0000000000..cb2181d9e2
--- /dev/null
+++ b/arch/arm/dts/imx6dl-aristainetos2c_7-u-boot.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0+ or X11
+/*
+ * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
+ */
+
+#include <imx6qdl-aristainetos2c-u-boot.dtsi>
+/ {
+	vdd_panel_reg: regulator-panel {
+		compatible = "regulator-fixed";
+		regulator-name = "panel_regulator";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&panel0 {
+	power-supply = <&vdd_panel_reg>;
+};
diff --git a/arch/arm/dts/imx6dl-aristainetos2c_7.dts b/arch/arm/dts/imx6dl-aristainetos2c_7.dts
new file mode 100644
index 0000000000..35435e1c10
--- /dev/null
+++ b/arch/arm/dts/imx6dl-aristainetos2c_7.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0)
+/*
+ * support for the imx6 based aristainetos2c board
+ *
+ * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
+ * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
+ *
+ */
+/dts-v1/;
+#include "imx6dl-aristainetos2_7.dtsi"
+#include "imx6qdl-aristainetos2c.dtsi"
+
+/ {
+	model = "aristainetos2c i.MX6 Dual Lite Board 7";
+	compatible = "fsl,imx6dl";
+};
diff --git a/arch/arm/dts/imx6qdl-aristainetos2c-u-boot.dtsi b/arch/arm/dts/imx6qdl-aristainetos2c-u-boot.dtsi
new file mode 100644
index 0000000000..88826a2634
--- /dev/null
+++ b/arch/arm/dts/imx6qdl-aristainetos2c-u-boot.dtsi
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0+ or X11
+/*
+ * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
+ */
+
+/ {
+	chosen {
+		u-boot,dm-pre-reloc;
+		stdout-path = &uart2;
+	};
+
+	wdt-reboot {
+		compatible = "wdt-reboot";
+		wdt = <&wdog1>;
+	};
+};
+
+&uart2 {
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl_gpio {
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl_uart2 {
+	u-boot,dm-pre-reloc;
+};
+
+&iomuxc {
+	u-boot,dm-pre-reloc;
+};
+
+&aips2 {
+	u-boot,dm-pre-reloc;
+};
+
+&backlight {
+	pwms = <&pwm1 0 300000>;
+	default-brightness-level = <2>;
+};
+
+/*
+ * allow switching write protect / reset pin by gpio,
+ * because "pinctrl-assert-gpios" from &ecspi1 isn't handled by u-boot
+ */
+&gpio2 {
+	u-boot,dm-pre-reloc;
+
+	wp_spi_nor {
+		gpio-hog;
+		output-high;
+		gpios = <15 GPIO_ACTIVE_HIGH>;
+	};
+
+	reset_spi_nor {
+		gpio-hog;
+		output-high;
+		gpios = <28 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&gpio4 {
+	u-boot,dm-pre-reloc;
+};
+
+&ecspi1 {
+	u-boot,dm-pre-reloc;
+};
+
+&flash {
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl_ecspi1 {
+	u-boot,dm-pre-reloc;
+};
diff --git a/arch/arm/dts/imx6qdl-aristainetos2c.dtsi b/arch/arm/dts/imx6qdl-aristainetos2c.dtsi
new file mode 100644
index 0000000000..ba13d55f41
--- /dev/null
+++ b/arch/arm/dts/imx6qdl-aristainetos2c.dtsi
@@ -0,0 +1,228 @@
+// SPDX-License-Identifier: (GPL-2.0)
+/*
+ * support for the imx6 based aristainetos2c board
+ *
+ * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
+ * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
+ *
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/imx6qdl-clock.h>
+
+#include "imx6qdl-aristainetos2-common.dtsi"
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio>;
+
+		LED_blue {
+			label = "led_blue";
+			gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+		};
+
+		LED_green {
+			label = "led_green";
+			gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		LED_red {
+			label = "led_red";
+			gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		LED_yellow {
+			label = "led_yellow";
+			gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+		};
+
+		LED_ena {
+			label = "led_ena";
+			gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ecspi1 {
+	fsl,spi-num-chipselects = <3>;
+	cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH
+		    &gpio4 10 GPIO_ACTIVE_HIGH
+		    &gpio4 11 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+	pinctrl-assert-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
+	pinctrl-assert-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
+
+	flash: m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q128a11", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&ecspi4 {
+	fsl,spi-num-chipselects = <2>;
+	cs-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH &gpio5 2 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi4>;
+	status = "okay";
+};
+
+&i2c1 {
+	tpm@20 {
+		compatible = "infineon,slb9645tt";
+		reg = <0x20>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
+			/* SS0# */
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x100b1
+			/* SS1# */
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x100b1
+			/* SS2# */
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x100b1
+			/* WP pin NOR Flash */
+			MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x4001b0b0
+			/* Flash nReset */
+			MX6QDL_PAD_EIM_EB0__GPIO2_IO28  0x4001b0b0
+		>;
+	};
+
+	pinctrl_ecspi4: ecspi4grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
+			MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
+			MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29  0x100b1 /* SS0# */
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02  0x100b1 /* SS1# */
+		>;
+	};
+
+	pinctrl_gpio: gpiogrp {
+		fsl,pins = <
+			/* led enable */
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x4001b0b0
+			/* LCD power enable */
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x4001b0b0
+			/* led yellow */
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x4001b0b0
+			/* led red */
+			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0x4001b0b0
+			/* led green */
+			MX6QDL_PAD_EIM_A24__GPIO5_IO04		0x4001b0b0
+			/* led blue */
+			MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x4001b0b0
+			/* Profibus IRQ */
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
+			/* FPGA IRQ currently unused*/
+			MX6QDL_PAD_SD3_DAT6__GPIO6_IO18		0x1b0b0
+			/* Display reset because of clock failure */
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11		0x4001b0b0
+			/* spi bus #2 SS driver enable */
+			MX6QDL_PAD_EIM_A23__GPIO6_IO06		0x4001b0b0
+			/* RST_LOC# PHY reset input (has pull-down!)*/
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x4001b0b0
+			/* Touchscreen IRQ */
+			MX6QDL_PAD_SD4_DAT1__GPIO2_IO09		0x1b0b0
+			/* PCIe reset */
+			MX6QDL_PAD_EIM_A22__GPIO2_IO16		0x4001b0b0
+			/* make sure pin is GPIO and not ENET_REF_CLK */
+			MX6QDL_PAD_GPIO_16__GPIO7_IO11		0x4001a0b0
+			/* TPM PP */
+			MX6QDL_PAD_EIM_A21__GPIO2_IO17		0x4001b0b0
+			/* TPM Reset */
+			MX6QDL_PAD_EIM_A20__GPIO2_IO18		0x4001b0b0
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x1b0b0
+			MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x1b0b0
+			MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x1b0b0
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID  0x17059
+			MX6QDL_PAD_KEY_COL4__USB_OTG_OC    0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+			/* SD1 card detect input */
+			MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x1b0b0
+			/* SD1 write protect input */
+			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20		0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			MX6QDL_PAD_NANDF_D4__SD2_DATA4		0x17059
+			MX6QDL_PAD_NANDF_D5__SD2_DATA5		0x17059
+			MX6QDL_PAD_NANDF_D6__SD2_DATA6		0x17059
+			MX6QDL_PAD_NANDF_D7__SD2_DATA7		0x17059
+		>;
+	};
+};
diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig
index de71cd52b4..f1a1021f10 100644
--- a/arch/arm/mach-imx/mx6/Kconfig
+++ b/arch/arm/mach-imx/mx6/Kconfig
@@ -158,6 +158,17 @@ config TARGET_ARISTAINETOS2BCSL
 	imply CMD_SATA
 	imply CMD_DM
 
+config TARGET_ARISTAINETOS2C
+	bool "Support aristainetos2-revC"
+	select BOARD_LATE_INIT
+	select MX6DL
+	select SYS_I2C_MXC
+	select MXC_UART
+	select FEC_MXC
+	select DM
+	imply CMD_SATA
+	imply CMD_DM
+
 config TARGET_CGTQMX6EVAL
 	bool "cgtqmx6eval"
 	select BOARD_LATE_INIT