Merge tag 'fsl-qoriq-2022-7-29' of https://source.denx.de/u-boot/custodians/u-boot-fsl-qoriq

mpc85xx: support for generating QorIQ pre-PBL eSDHC boot sector
p1_p2_rdb_pc: Remove I-flag from second L2 SRAM mapping
p1_p2_rdb_pc: Fix parsing inverted bits from boot input data
p1_p2_rdb_pc: Simplify SPL offset macros

4 files changed, 163 insertions, 0 deletions

diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index b6881bf1ff..12dc03cfd0 100644
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -12,6 +12,59 @@ config CMD_ERRATA
 	  This enables the 'errata' command which displays a list of errata
 	  work-arounds which are enabled for the current board.
 
+config FSL_PREPBL_ESDHC_BOOT_SECTOR
+	bool "Generate QorIQ pre-PBL eSDHC boot sector"
+	depends on MPC85xx
+	depends on SYS_EXTRA_OPTIONS = SDCARD
+	help
+	  With this option final image would have prepended QorIQ pre-PBL eSDHC
+	  boot sector suitable for SD card images. This boot sector instruct
+	  BootROM to configure L2 SRAM and eSDHC then load image from SD card
+	  into L2 SRAM and finally jump to image entry point.
+
+	  This is alternative to Freescale boot_format tool, but works only for
+	  SD card images and only for L2 SRAM booting. U-Boot images generated
+	  with this option should not passed to boot_format tool.
+
+	  For other configuration like booting from eSPI or configuring SDRAM
+	  please use Freescale boot_format tool without this option. See file
+	  doc/README.mpc85xx-sd-spi-boot
+
+config FSL_PREPBL_ESDHC_BOOT_SECTOR_START
+	int "QorIQ pre-PBL eSDHC boot sector start offset"
+	depends on FSL_PREPBL_ESDHC_BOOT_SECTOR
+	range 0 23
+	default 0
+	help
+	  QorIQ pre-PBL eSDHC boot sector may be located on one of the first
+	  24 SD card sectors. Select SD card sector on which final U-Boot
+	  image (with this boot sector) would be installed.
+
+	  By default first SD card sector (0) is used. But this may be changed
+	  to allow installing U-Boot image on some partition (with fixed start
+	  sector).
+
+	  Please note that any sector on SD card prior this boot sector must
+	  not contain ASCII "BOOT" bytes at sector offset 0x40.
+
+config FSL_PREPBL_ESDHC_BOOT_SECTOR_DATA
+	int "Relative data sector for QorIQ pre-PBL eSDHC boot sector"
+	depends on FSL_PREPBL_ESDHC_BOOT_SECTOR
+	default 1
+	range 1 8388607
+	help
+	  Select data sector from the beginning of QorIQ pre-PBL eSDHC boot
+	  sector on which would be stored raw U-Boot image.
+
+	  By default is it second sector (1) which is the first available free
+	  sector (on the first sector is stored boot sector). It can be any
+	  sector number which offset in bytes can be expressed by 32-bit number.
+
+	  In case this final U-Boot image (with this boot sector) is put on
+	  the FAT32 partition into reserved boot area, this data sector needs
+	  to be at least 2 (third sector) because FAT32 use second sector for
+	  its data.
+
 choice
 	prompt "Target select"
 	optional
diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S
index 8a6340d800..9d44fa4158 100644
--- a/arch/powerpc/cpu/mpc85xx/start.S
+++ b/arch/powerpc/cpu/mpc85xx/start.S
@@ -57,6 +57,100 @@
 	GOT_ENTRY(__bss_start)
 	END_GOT
 
+#ifdef CONFIG_FSL_PREPBL_ESDHC_BOOT_SECTOR
+#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
+
+/* Maximal size of the image */
+#ifdef CONFIG_SPL_BUILD
+#define MAX_IMAGE_SIZE (CONFIG_SPL_MAX_SIZE - (CONFIG_FSL_PREPBL_ESDHC_BOOT_SECTOR_DATA * 512))
+#else
+#define MAX_IMAGE_SIZE CONFIG_SYS_L2_SIZE
+#endif
+
+#if defined(CONFIG_SPL_BUILD) && CONFIG_SPL_MAX_SIZE < CONFIG_FSL_PREPBL_ESDHC_BOOT_SECTOR_DATA * 512
+#error "CONFIG_SPL_MAX_SIZE is too small for CONFIG_FSL_PREPBL_ESDHC_BOOT_SECTOR_DATA"
+#endif
+
+#if MAX_IMAGE_SIZE > CONFIG_SYS_L2_SIZE
+#error "Image is too big"
+#endif
+
+#define DIV_ROUND_UP(a, b) (((a) + (b) - 1) / (b))
+#define ALIGN(x, a) (DIV_ROUND_UP(x, a) * (a))
+
+/* Definitions from C header file asm/immap_85xx.h */
+
+#define CONFIG_SYS_MPC85xx_L2_OFFSET		0x20000
+
+#define MPC85xx_L2CTL				0x000
+#define MPC85xx_L2CTL_L2E			0x80000000
+#define MPC85xx_L2CTL_L2SRAM_ENTIRE		0x00010000
+
+#define MPC85xx_L2SRBAR0			0x100
+
+#define MPC85xx_L2ERRDIS			0xe44
+#define MPC85xx_L2ERRDIS_MBECC			0x00000008
+#define MPC85xx_L2ERRDIS_SBECC			0x00000004
+
+/* Definitions from C header file fsl_esdhc.h */
+
+#define ESDHCCTL				0x0002e40c
+#define ESDHCCTL_SNOOP				0x00000040
+
+/*
+ * QorIQ pre-PBL eSDHC boot sector:
+ * Instruct BootROM to configure L2 SRAM and eSDHC then load image
+ * from SD card into L2 SRAM and finally jump to image entry point.
+ */
+	.section .bootsect, "a"
+	.globl bootsect
+
+bootsect:
+	.org 0x40 /* BOOT signature */
+	.ascii "BOOT"
+
+	.org 0x48 /* Number of bytes to be copied, must be multiple of block size (512) */
+	.long ALIGN(MAX_IMAGE_SIZE, 512)
+
+	.org 0x50 /* Source address from the beginning of boot sector in byte address format, must be multiple of block size (512) */
+	.long (CONFIG_FSL_PREPBL_ESDHC_BOOT_SECTOR_START + CONFIG_FSL_PREPBL_ESDHC_BOOT_SECTOR_DATA) * 512
+
+	.org 0x58 /* Target address in the system's local memory address space */
+	.long CONFIG_SYS_MONITOR_BASE
+
+	.org 0x60 /* Execution starting address */
+	.long _start
+
+	.org 0x68 /* Number of configuration data pairs */
+	.long DIV_ROUND_UP(.Lconf_pair_end - .Lconf_pair_start, 8)
+
+	.org 0x80 /* Start of configuration */
+	.Lconf_pair_start:
+
+	.long CONFIG_SYS_CCSRBAR_DEFAULT + CONFIG_SYS_MPC85xx_L2_OFFSET + MPC85xx_L2SRBAR0 /* Address: L2 memory-mapped SRAM base addr 0 */
+	.long CONFIG_SYS_INIT_L2_ADDR
+
+	.long CONFIG_SYS_CCSRBAR_DEFAULT + CONFIG_SYS_MPC85xx_L2_OFFSET + MPC85xx_L2ERRDIS /* Address: L2 cache error disable */
+	.long MPC85xx_L2ERRDIS_MBECC | MPC85xx_L2ERRDIS_SBECC
+
+	.long CONFIG_SYS_CCSRBAR_DEFAULT + CONFIG_SYS_MPC85xx_L2_OFFSET + MPC85xx_L2CTL /* Address: L2 configuration 0 */
+	.long MPC85xx_L2CTL_L2E | MPC85xx_L2CTL_L2SRAM_ENTIRE
+
+	.long CONFIG_SYS_CCSRBAR_DEFAULT + ESDHCCTL /* Address: eSDHC DMA control */
+	.long ESDHCCTL_SNOOP
+
+	.long 0x40000001 /* Command: Delay in 8 CCB clocks */
+	.long 256
+
+	.long 0x80000001 /* End of configuration */
+	.Lconf_pair_end:
+
+	.org 0x1b8 /* Reserved for MBR/DBR */
+	.org 0x200 /* End of boot sector */
+
+#endif
+#endif
+
 /*
  * e500 Startup -- after reset only the last 4KB of the effective
  * address space is mapped in the MMU L2 TLB1 Entry0. The .bootpg
diff --git a/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds b/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds
index 62c3c51dea..e881537452 100644
--- a/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds
+++ b/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds
@@ -12,6 +12,14 @@ OUTPUT_ARCH(powerpc)
 
 SECTIONS
 {
+/* Optional boot sector */
+#if defined(CONFIG_FSL_PREPBL_ESDHC_BOOT_SECTOR)
+	.bootsect IMAGE_TEXT_BASE - CONFIG_FSL_PREPBL_ESDHC_BOOT_SECTOR_DATA * 512 : {
+		KEEP(*(.bootsect))
+		. = CONFIG_FSL_PREPBL_ESDHC_BOOT_SECTOR_DATA * 512;
+	}
+#endif
+
 	. = IMAGE_TEXT_BASE;
 	.text : {
 /* For ifc, elbc, esdhc, espi, all need the SPL without section .resetvec */
diff --git a/arch/powerpc/cpu/mpc85xx/u-boot.lds b/arch/powerpc/cpu/mpc85xx/u-boot.lds
index 8fba712655..c766f20cb0 100644
--- a/arch/powerpc/cpu/mpc85xx/u-boot.lds
+++ b/arch/powerpc/cpu/mpc85xx/u-boot.lds
@@ -16,6 +16,14 @@ ENTRY(_start)
 
 SECTIONS
 {
+  /* Optional boot sector */
+#if defined(CONFIG_FSL_PREPBL_ESDHC_BOOT_SECTOR) && !defined(CONFIG_SPL)
+  .bootsect CONFIG_SYS_TEXT_BASE - CONFIG_FSL_PREPBL_ESDHC_BOOT_SECTOR_DATA * 512 : {
+    KEEP(arch/powerpc/cpu/mpc85xx/start.o (.bootsect))
+    . = CONFIG_FSL_PREPBL_ESDHC_BOOT_SECTOR_DATA * 512;
+  }
+#endif
+
   /* Read-only sections, merged into text segment: */
   .text      :
   {