stm32f1: remove stm32f1 support

A few years ago STM32F1 SoCs support has been added :
0144caf22ce6acd5c  gpio: stm32: add stm32f1 support
2d18ef2364fd3561a  ARMv7M: add STM32F1 support

But neither STM32F1 dedicated defconfig nor board was
associated to these commits.

Got confirmation from Tom Rini and Matt Porter to remove
all this code [1]

[1] http://u-boot.10912.n7.nabble.com/Remove-STM32F1-support-td301603.html

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

10 files changed, 0 insertions, 797 deletions

diff --git a/arch/arm/include/asm/arch-stm32f1/gpio.h b/arch/arm/include/asm/arch-stm32f1/gpio.h
deleted file mode 100644
index 8e8712fecc..0000000000
--- a/arch/arm/include/asm/arch-stm32f1/gpio.h
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * (C) Copyright 2011
- * Yuri Tikhonov, Emcraft Systems, yur@emcraft.com
- *
- * (C) Copyright 2015
- * Kamil Lulko, <kamil.lulko@gmail.com>
- *
- * Copyright 2015 ATS Advanced Telematics Systems GmbH
- * Copyright 2015 Konsulko Group, Matt Porter <mporter@konsulko.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef _STM32_GPIO_H_
-#define _STM32_GPIO_H_
-
-enum stm32_gpio_port {
-	STM32_GPIO_PORT_A = 0,
-	STM32_GPIO_PORT_B,
-	STM32_GPIO_PORT_C,
-	STM32_GPIO_PORT_D,
-	STM32_GPIO_PORT_E,
-	STM32_GPIO_PORT_F,
-	STM32_GPIO_PORT_G,
-};
-
-enum stm32_gpio_pin {
-	STM32_GPIO_PIN_0 = 0,
-	STM32_GPIO_PIN_1,
-	STM32_GPIO_PIN_2,
-	STM32_GPIO_PIN_3,
-	STM32_GPIO_PIN_4,
-	STM32_GPIO_PIN_5,
-	STM32_GPIO_PIN_6,
-	STM32_GPIO_PIN_7,
-	STM32_GPIO_PIN_8,
-	STM32_GPIO_PIN_9,
-	STM32_GPIO_PIN_10,
-	STM32_GPIO_PIN_11,
-	STM32_GPIO_PIN_12,
-	STM32_GPIO_PIN_13,
-	STM32_GPIO_PIN_14,
-	STM32_GPIO_PIN_15
-};
-
-enum stm32_gpio_icnf {
-	STM32_GPIO_ICNF_AN = 0,
-	STM32_GPIO_ICNF_IN_FLT,
-	STM32_GPIO_ICNF_IN_PUD,
-	STM32_GPIO_ICNF_RSVD
-};
-
-enum stm32_gpio_ocnf {
-	STM32_GPIO_OCNF_GP_PP = 0,
-	STM32_GPIO_OCNF_GP_OD,
-	STM32_GPIO_OCNF_AF_PP,
-	STM32_GPIO_OCNF_AF_OD
-};
-
-enum stm32_gpio_pupd {
-	STM32_GPIO_PUPD_DOWN = 0,
-	STM32_GPIO_PUPD_UP,
-};
-
-enum stm32_gpio_mode {
-	STM32_GPIO_MODE_IN = 0,
-	STM32_GPIO_MODE_OUT_10M,
-	STM32_GPIO_MODE_OUT_2M,
-	STM32_GPIO_MODE_OUT_50M
-};
-
-enum stm32_gpio_af {
-	STM32_GPIO_AF0 = 0,
-	STM32_GPIO_AF1,
-	STM32_GPIO_AF2,
-	STM32_GPIO_AF3,
-	STM32_GPIO_AF4,
-	STM32_GPIO_AF5,
-	STM32_GPIO_AF6,
-	STM32_GPIO_AF7,
-	STM32_GPIO_AF8,
-	STM32_GPIO_AF9,
-	STM32_GPIO_AF10,
-	STM32_GPIO_AF11,
-	STM32_GPIO_AF12,
-	STM32_GPIO_AF13,
-	STM32_GPIO_AF14,
-	STM32_GPIO_AF15
-};
-
-struct stm32_gpio_dsc {
-	enum stm32_gpio_port	port;
-	enum stm32_gpio_pin	pin;
-};
-
-struct stm32_gpio_ctl {
-	enum stm32_gpio_icnf	icnf;
-	enum stm32_gpio_ocnf	ocnf;
-	enum stm32_gpio_mode	mode;
-	enum stm32_gpio_pupd	pupd;
-	enum stm32_gpio_af	af;
-};
-
-static inline unsigned stm32_gpio_to_port(unsigned gpio)
-{
-	return gpio / 16;
-}
-
-static inline unsigned stm32_gpio_to_pin(unsigned gpio)
-{
-	return gpio % 16;
-}
-
-int stm32_gpio_config(const struct stm32_gpio_dsc *gpio_dsc,
-		const struct stm32_gpio_ctl *gpio_ctl);
-int stm32_gpout_set(const struct stm32_gpio_dsc *gpio_dsc, int state);
-
-#endif /* _STM32_GPIO_H_ */
diff --git a/arch/arm/include/asm/arch-stm32f1/stm32.h b/arch/arm/include/asm/arch-stm32f1/stm32.h
deleted file mode 100644
index 1af73c5428..0000000000
--- a/arch/arm/include/asm/arch-stm32f1/stm32.h
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * (C) Copyright 2011
- * Yuri Tikhonov, Emcraft Systems, yur@emcraft.com
- *
- * (C) Copyright 2015
- * Kamil Lulko, <kamil.lulko@gmail.com>
- *
- * Copyright 2015 ATS Advanced Telematics Systems GmbH
- * Copyright 2015 Konsulko Group, Matt Porter <mporter@konsulko.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef _MACH_STM32_H_
-#define _MACH_STM32_H_
-
-/*
- * Peripheral memory map
- */
-#define STM32_PERIPH_BASE	0x40000000
-#define STM32_APB1PERIPH_BASE	(STM32_PERIPH_BASE + 0x00000000)
-#define STM32_APB2PERIPH_BASE	(STM32_PERIPH_BASE + 0x00010000)
-#define STM32_AHB1PERIPH_BASE	(STM32_PERIPH_BASE + 0x00018000)
-
-#define STM32_BUS_MASK		0xFFFF0000
-
-#define STM32_GPIOA_BASE	(STM32_APB2PERIPH_BASE + 0x0800)
-#define STM32_GPIOB_BASE	(STM32_APB2PERIPH_BASE + 0x0C00)
-#define STM32_GPIOC_BASE	(STM32_APB2PERIPH_BASE + 0x1000)
-#define STM32_GPIOD_BASE	(STM32_APB2PERIPH_BASE + 0x1400)
-#define STM32_GPIOE_BASE	(STM32_APB2PERIPH_BASE + 0x1800)
-#define STM32_GPIOF_BASE	(STM32_APB2PERIPH_BASE + 0x1C00)
-#define STM32_GPIOG_BASE	(STM32_APB2PERIPH_BASE + 0x2000)
-
-/*
- * Register maps
- */
-struct stm32_des_regs {
-	u16 flash_size;
-	u16 pad1;
-	u32 pad2;
-	u32 uid0;
-	u32 uid1;
-	u32 uid2;
-};
-
-struct stm32_rcc_regs {
-	u32 cr;		/* RCC clock control */
-	u32 cfgr;	/* RCC clock configuration */
-	u32 cir;	/* RCC clock interrupt */
-	u32 apb2rstr;	/* RCC APB2 peripheral reset */
-	u32 apb1rstr;	/* RCC APB1 peripheral reset */
-	u32 ahbenr;	/* RCC AHB peripheral clock enable */
-	u32 apb2enr;	/* RCC APB2 peripheral clock enable */
-	u32 apb1enr;	/* RCC APB1 peripheral clock enable */
-	u32 bdcr;	/* RCC Backup domain control */
-	u32 csr;	/* RCC clock control & status */
-};
-
-struct stm32_pwr_regs {
-	u32 cr;
-	u32 csr;
-};
-
-struct stm32_flash_regs {
-	u32 acr;
-	u32 keyr;
-	u32 optkeyr;
-	u32 sr;
-	u32 cr;
-	u32 ar;
-	u32 rsvd1;	/* Reserved */
-	u32 obr;
-	u32 wrpr;
-	u32 rsvd2[8];	/* Reserved */
-	u32 keyr2;
-	u32 rsvd3;
-	u32 sr2;
-	u32 cr2;
-	u32 ar2;
-};
-
-/* Per bank register set for XL devices */
-struct stm32_flash_bank_regs {
-	u32 keyr;
-	u32 rsvd;	/* Reserved */
-	u32 sr;
-	u32 cr;
-	u32 ar;
-};
-
-/*
- * Registers access macros
- */
-#define STM32_DES_BASE		(0x1ffff7e0)
-#define STM32_DES		((struct stm32_des_regs *)STM32_DES_BASE)
-
-#define STM32_RCC_BASE		(STM32_AHB1PERIPH_BASE + 0x9000)
-#define STM32_RCC		((struct stm32_rcc_regs *)STM32_RCC_BASE)
-
-#define STM32_PWR_BASE		(STM32_APB1PERIPH_BASE + 0x7000)
-#define STM32_PWR		((struct stm32_pwr_regs *)STM32_PWR_BASE)
-
-#define STM32_FLASH_BASE	(STM32_AHB1PERIPH_BASE + 0xa000)
-#define STM32_FLASH		((struct stm32_flash_regs *)STM32_FLASH_BASE)
-
-#define STM32_FLASH_SR_BSY		(1 << 0)
-
-#define STM32_FLASH_CR_PG		(1 << 0)
-#define STM32_FLASH_CR_PER		(1 << 1)
-#define STM32_FLASH_CR_STRT		(1 << 6)
-#define STM32_FLASH_CR_LOCK		(1 << 7)
-
-enum clock {
-	CLOCK_CORE,
-	CLOCK_AHB,
-	CLOCK_APB1,
-	CLOCK_APB2
-};
-
-int configure_clocks(void);
-unsigned long clock_get(enum clock clck);
-
-#endif /* _MACH_STM32_H_ */
diff --git a/arch/arm/mach-stm32/Kconfig b/arch/arm/mach-stm32/Kconfig
index 8f4371429f..f70f5ec965 100644
--- a/arch/arm/mach-stm32/Kconfig
+++ b/arch/arm/mach-stm32/Kconfig
@@ -3,9 +3,6 @@ if STM32
 config STM32F4
 	bool "stm32f4 family"
 
-config STM32F1
-	bool "stm32f1 family"
-
 config STM32F7
 	bool "stm32f7 family"
 	select SUPPORT_SPL
@@ -29,7 +26,6 @@ config STM32F7
 	select SPL_XIP_SUPPORT
 
 source "arch/arm/mach-stm32/stm32f4/Kconfig"
-source "arch/arm/mach-stm32/stm32f1/Kconfig"
 source "arch/arm/mach-stm32/stm32f7/Kconfig"
 
 endif
diff --git a/arch/arm/mach-stm32/Makefile b/arch/arm/mach-stm32/Makefile
index ffc537f35b..6b7694471f 100644
--- a/arch/arm/mach-stm32/Makefile
+++ b/arch/arm/mach-stm32/Makefile
@@ -5,6 +5,5 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-obj-$(CONFIG_STM32F1) += stm32f1/
 obj-$(CONFIG_STM32F4) += stm32f4/
 obj-$(CONFIG_STM32F7) += stm32f7/
diff --git a/arch/arm/mach-stm32/stm32f1/Kconfig b/arch/arm/mach-stm32/stm32f1/Kconfig
deleted file mode 100644
index f627fd2541..0000000000
--- a/arch/arm/mach-stm32/stm32f1/Kconfig
+++ /dev/null
@@ -1,3 +0,0 @@
-if STM32F1
-
-endif
diff --git a/arch/arm/mach-stm32/stm32f1/Makefile b/arch/arm/mach-stm32/stm32f1/Makefile
deleted file mode 100644
index e2081dbf9e..0000000000
--- a/arch/arm/mach-stm32/stm32f1/Makefile
+++ /dev/null
@@ -1,14 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2015
-# Kamil Lulko, <kamil.lulko@gmail.com>
-#
-# Copyright 2015 ATS Advanced Telematics Systems GmbH
-# Copyright 2015 Konsulko Group, Matt Porter <mporter@konsulko.com>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y += soc.o clock.o timer.o flash.o
diff --git a/arch/arm/mach-stm32/stm32f1/clock.c b/arch/arm/mach-stm32/stm32f1/clock.c
deleted file mode 100644
index 28208485d4..0000000000
--- a/arch/arm/mach-stm32/stm32f1/clock.c
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * (C) Copyright 2015
- * Kamil Lulko, <kamil.lulko@gmail.com>
- *
- * Copyright 2015 ATS Advanced Telematics Systems GmbH
- * Copyright 2015 Konsulko Group, Matt Porter <mporter@konsulko.com>
- *
- * (C) Copyright 2014
- * STMicroelectronics
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/stm32.h>
-
-#define RCC_CR_HSION		(1 << 0)
-#define RCC_CR_HSEON		(1 << 16)
-#define RCC_CR_HSERDY		(1 << 17)
-#define RCC_CR_HSEBYP		(1 << 18)
-#define RCC_CR_CSSON		(1 << 19)
-#define RCC_CR_PLLON		(1 << 24)
-#define RCC_CR_PLLRDY		(1 << 25)
-
-#define RCC_CFGR_PLLMUL_MASK	0x3C0000
-#define RCC_CFGR_PLLMUL_SHIFT	18
-#define RCC_CFGR_PLLSRC_HSE	(1 << 16)
-
-#define RCC_CFGR_AHB_PSC_MASK	0xF0
-#define RCC_CFGR_APB1_PSC_MASK	0x700
-#define RCC_CFGR_APB2_PSC_MASK	0x3800
-#define RCC_CFGR_SW0		(1 << 0)
-#define RCC_CFGR_SW1		(1 << 1)
-#define RCC_CFGR_SW_MASK	0x3
-#define RCC_CFGR_SW_HSI		0
-#define RCC_CFGR_SW_HSE		RCC_CFGR_SW0
-#define RCC_CFGR_SW_PLL		RCC_CFGR_SW1
-#define RCC_CFGR_SWS0		(1 << 2)
-#define RCC_CFGR_SWS1		(1 << 3)
-#define RCC_CFGR_SWS_MASK	0xC
-#define RCC_CFGR_SWS_HSI	0
-#define RCC_CFGR_SWS_HSE	RCC_CFGR_SWS0
-#define RCC_CFGR_SWS_PLL	RCC_CFGR_SWS1
-#define RCC_CFGR_HPRE_SHIFT	4
-#define RCC_CFGR_PPRE1_SHIFT	8
-#define RCC_CFGR_PPRE2_SHIFT	11
-
-#define RCC_APB1ENR_PWREN	(1 << 28)
-
-#define PWR_CR_VOS0		(1 << 14)
-#define PWR_CR_VOS1		(1 << 15)
-#define PWR_CR_VOS_MASK		0xC000
-#define PWR_CR_VOS_SCALE_MODE_1	(PWR_CR_VOS0 | PWR_CR_VOS1)
-#define PWR_CR_VOS_SCALE_MODE_2	(PWR_CR_VOS1)
-#define PWR_CR_VOS_SCALE_MODE_3	(PWR_CR_VOS0)
-
-#define FLASH_ACR_WS(n)		n
-#define FLASH_ACR_PRFTEN	(1 << 8)
-#define FLASH_ACR_ICEN		(1 << 9)
-#define FLASH_ACR_DCEN		(1 << 10)
-
-struct psc {
-	u8	ahb_psc;
-	u8	apb1_psc;
-	u8	apb2_psc;
-};
-
-#define AHB_PSC_1		0
-#define AHB_PSC_2		0x8
-#define AHB_PSC_4		0x9
-#define AHB_PSC_8		0xA
-#define AHB_PSC_16		0xB
-#define AHB_PSC_64		0xC
-#define AHB_PSC_128		0xD
-#define AHB_PSC_256		0xE
-#define AHB_PSC_512		0xF
-
-#define APB_PSC_1		0
-#define APB_PSC_2		0x4
-#define APB_PSC_4		0x5
-#define APB_PSC_8		0x6
-#define APB_PSC_16		0x7
-
-#if !defined(CONFIG_STM32_HSE_HZ)
-#error "CONFIG_STM32_HSE_HZ not defined!"
-#else
-#if (CONFIG_STM32_HSE_HZ == 8000000)
-#define RCC_CFGR_PLLMUL_CFG	0x7
-struct psc psc_hse = {
-	.ahb_psc = AHB_PSC_1,
-	.apb1_psc = APB_PSC_2,
-	.apb2_psc = APB_PSC_1
-};
-#else
-#error "No PLL/Prescaler configuration for given CONFIG_STM32_HSE_HZ exists"
-#endif
-#endif
-
-int configure_clocks(void)
-{
-	/* Reset RCC configuration */
-	setbits_le32(&STM32_RCC->cr, RCC_CR_HSION);
-	writel(0, &STM32_RCC->cfgr); /* Reset CFGR */
-	clrbits_le32(&STM32_RCC->cr, (RCC_CR_HSEON | RCC_CR_CSSON
-		| RCC_CR_PLLON));
-	clrbits_le32(&STM32_RCC->cr, RCC_CR_HSEBYP);
-	writel(0, &STM32_RCC->cir); /* Disable all interrupts */
-
-	/* Configure for HSE+PLL operation */
-	setbits_le32(&STM32_RCC->cr, RCC_CR_HSEON);
-	while (!(readl(&STM32_RCC->cr) & RCC_CR_HSERDY))
-		;
-
-	/* Enable high performance mode, System frequency up to 168 MHz */
-	setbits_le32(&STM32_RCC->apb1enr, RCC_APB1ENR_PWREN);
-	writel(PWR_CR_VOS_SCALE_MODE_1, &STM32_PWR->cr);
-
-	setbits_le32(&STM32_RCC->cfgr,
-		     RCC_CFGR_PLLMUL_CFG << RCC_CFGR_PLLMUL_SHIFT);
-	setbits_le32(&STM32_RCC->cfgr, RCC_CFGR_PLLSRC_HSE);
-	setbits_le32(&STM32_RCC->cfgr, ((
-		psc_hse.ahb_psc << RCC_CFGR_HPRE_SHIFT)
-		| (psc_hse.apb1_psc << RCC_CFGR_PPRE1_SHIFT)
-		| (psc_hse.apb2_psc << RCC_CFGR_PPRE2_SHIFT)));
-
-	setbits_le32(&STM32_RCC->cr, RCC_CR_PLLON);
-
-	while (!(readl(&STM32_RCC->cr) & RCC_CR_PLLRDY))
-		;
-
-	/* 5 wait states, Prefetch enabled, D-Cache enabled, I-Cache enabled */
-	writel(FLASH_ACR_WS(5) | FLASH_ACR_PRFTEN | FLASH_ACR_ICEN
-		| FLASH_ACR_DCEN, &STM32_FLASH->acr);
-
-	clrbits_le32(&STM32_RCC->cfgr, (RCC_CFGR_SW0 | RCC_CFGR_SW1));
-	setbits_le32(&STM32_RCC->cfgr, RCC_CFGR_SW_PLL);
-
-	while ((readl(&STM32_RCC->cfgr) & RCC_CFGR_SWS_MASK) !=
-			RCC_CFGR_SWS_PLL)
-		;
-
-	return 0;
-}
-
-unsigned long clock_get(enum clock clck)
-{
-	u32 sysclk = 0;
-	u32 shift = 0;
-	/* PLL table lookups for clock computation */
-	u8 pll_mul_table[16] = {
-		2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 16
-	};
-	/* Prescaler table lookups for clock computation */
-	u8 ahb_psc_table[16] = {
-		0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9
-	};
-	u8 apb_psc_table[8] = {
-		0, 0, 0, 0, 1, 2, 3, 4
-	};
-
-	if ((readl(&STM32_RCC->cfgr) & RCC_CFGR_SWS_MASK) ==
-			RCC_CFGR_SWS_PLL) {
-		u16 pll;
-		pll = ((readl(&STM32_RCC->cfgr) & RCC_CFGR_PLLMUL_MASK)
-			>> RCC_CFGR_PLLMUL_SHIFT);
-		sysclk = CONFIG_STM32_HSE_HZ * pll_mul_table[pll];
-	}
-
-	switch (clck) {
-	case CLOCK_CORE:
-		return sysclk;
-		break;
-	case CLOCK_AHB:
-		shift = ahb_psc_table[(
-			(readl(&STM32_RCC->cfgr) & RCC_CFGR_AHB_PSC_MASK)
-			>> RCC_CFGR_HPRE_SHIFT)];
-		return sysclk >>= shift;
-		break;
-	case CLOCK_APB1:
-		shift = apb_psc_table[(
-			(readl(&STM32_RCC->cfgr) & RCC_CFGR_APB1_PSC_MASK)
-			>> RCC_CFGR_PPRE1_SHIFT)];
-		return sysclk >>= shift;
-		break;
-	case CLOCK_APB2:
-		shift = apb_psc_table[(
-			(readl(&STM32_RCC->cfgr) & RCC_CFGR_APB2_PSC_MASK)
-			>> RCC_CFGR_PPRE2_SHIFT)];
-		return sysclk >>= shift;
-		break;
-	default:
-		return 0;
-		break;
-	}
-}
diff --git a/arch/arm/mach-stm32/stm32f1/flash.c b/arch/arm/mach-stm32/stm32f1/flash.c
deleted file mode 100644
index 9dc8e1198f..0000000000
--- a/arch/arm/mach-stm32/stm32f1/flash.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * (C) Copyright 2015
- * Kamil Lulko, <kamil.lulko@gmail.com>
- *
- * Copyright 2015 ATS Advanced Telematics Systems GmbH
- * Copyright 2015 Konsulko Group, Matt Porter <mporter@konsulko.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/stm32.h>
-
-#define STM32_FLASH_KEY1	0x45670123
-#define STM32_FLASH_KEY2	0xcdef89ab
-
-#define STM32_NUM_BANKS	2
-#define STM32_MAX_BANK	0x200
-
-flash_info_t flash_info[STM32_NUM_BANKS];
-static struct stm32_flash_bank_regs *flash_bank[STM32_NUM_BANKS];
-
-static void stm32f1_flash_lock(u8 bank, u8 lock)
-{
-	if (lock) {
-		setbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_LOCK);
-	} else {
-		writel(STM32_FLASH_KEY1, &flash_bank[bank]->keyr);
-		writel(STM32_FLASH_KEY2, &flash_bank[bank]->keyr);
-	}
-}
-
-/* Only XL devices are supported (2 KiB sector size) */
-unsigned long flash_init(void)
-{
-	u8 i, banks;
-	u16 j, size;
-
-	/* Set up accessors for XL devices with wonky register layout */
-	flash_bank[0] = (struct stm32_flash_bank_regs *)&STM32_FLASH->keyr;
-	flash_bank[1] = (struct stm32_flash_bank_regs *)&STM32_FLASH->keyr2;
-
-	/*
-	 * Get total flash size (in KiB) and configure number of banks
-	 * present and sector count per bank.
-	 */
-	size = readw(&STM32_DES->flash_size);
-	if (size <= STM32_MAX_BANK) {
-		banks = 1;
-		flash_info[0].sector_count = size >> 1;
-	} else {
-		banks = 2;
-		flash_info[0].sector_count = STM32_MAX_BANK >> 1;
-		flash_info[1].sector_count = (size - STM32_MAX_BANK) >> 1;
-	}
-
-	/* Configure start/size for all sectors */
-	for (i = 0; i < banks; i++) {
-		flash_info[i].flash_id = FLASH_STM32F1;
-		flash_info[i].start[0] = CONFIG_SYS_FLASH_BASE + (i << 19);
-		flash_info[i].size = 2048;
-		for (j = 1; (j < flash_info[i].sector_count); j++) {
-			flash_info[i].start[j] = flash_info[i].start[j - 1]
-				+ 2048;
-			flash_info[i].size += 2048;
-		}
-	}
-
-	return size << 10;
-}
-
-void flash_print_info(flash_info_t *info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf("Missing or unknown FLASH type\n");
-		return;
-	} else if (info->flash_id == FLASH_STM32F1) {
-		printf("STM32F1 Embedded Flash\n");
-	}
-
-	printf("  Size: %ld MB in %d Sectors\n",
-	       info->size >> 10, info->sector_count);
-
-	printf("  Sector Start Addresses:");
-	for (i = 0; i < info->sector_count; ++i) {
-		if ((i % 5) == 0)
-			printf("\n   ");
-		printf(" %08lX%s",
-		       info->start[i],
-			info->protect[i] ? " (RO)" : "     ");
-	}
-	printf("\n");
-	return;
-}
-
-int flash_erase(flash_info_t *info, int first, int last)
-{
-	u8 bank = 0xff;
-	int i;
-
-	for (i = 0; i < STM32_NUM_BANKS; i++) {
-		if (info == &flash_info[i]) {
-			bank = i;
-			break;
-		}
-	}
-	if (bank == 0xff)
-		return -1;
-
-	stm32f1_flash_lock(bank, 0);
-
-	for (i = first; i <= last; i++) {
-		while (readl(&flash_bank[bank]->sr) & STM32_FLASH_SR_BSY)
-			;
-
-		setbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_PER);
-
-		writel(info->start[i], &flash_bank[bank]->ar);
-
-		setbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_STRT);
-
-		while (readl(&flash_bank[bank]->sr) & STM32_FLASH_SR_BSY)
-			;
-	}
-
-	clrbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_PER);
-
-	stm32f1_flash_lock(bank, 1);
-
-	return 0;
-}
-
-int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-	ulong i;
-	u8 bank = 0xff;
-
-	if (addr & 1) {
-		printf("Flash address must be half word aligned\n");
-		return -1;
-	}
-
-	if (cnt & 1) {
-		printf("Flash length must be half word aligned\n");
-		return -1;
-	}
-
-	for (i = 0; i < 2; i++) {
-		if (info == &flash_info[i]) {
-			bank = i;
-			break;
-		}
-	}
-
-	if (bank == 0xff)
-		return -1;
-
-	while (readl(&flash_bank[bank]->sr) & STM32_FLASH_SR_BSY)
-		;
-
-	stm32f1_flash_lock(bank, 0);
-
-	setbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_PG);
-
-	/* STM32F1 requires half word writes */
-	for (i = 0; i < cnt >> 1; i++) {
-		*(u16 *)(addr + i * 2) = ((u16 *)src)[i];
-		while (readl(&flash_bank[bank]->sr) & STM32_FLASH_SR_BSY)
-			;
-	}
-
-	clrbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_PG);
-
-	stm32f1_flash_lock(bank, 1);
-
-	return 0;
-}
diff --git a/arch/arm/mach-stm32/stm32f1/soc.c b/arch/arm/mach-stm32/stm32f1/soc.c
deleted file mode 100644
index 4438621b9a..0000000000
--- a/arch/arm/mach-stm32/stm32f1/soc.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * (C) Copyright 2015
- * Kamil Lulko, <kamil.lulko@gmail.com>
- *
- * Copyright 2015 ATS Advanced Telematics Systems GmbH
- * Copyright 2015 Konsulko Group, Matt Porter <mporter@konsulko.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/armv7m.h>
-#include <asm/arch/stm32.h>
-
-u32 get_cpu_rev(void)
-{
-	return 0;
-}
-
-int arch_cpu_init(void)
-{
-	configure_clocks();
-
-	/*
-	 * Configure the memory protection unit (MPU) to allow full access to
-	 * the whole 4GB address space.
-	 */
-	writel(0, &V7M_MPU->rnr);
-	writel(0, &V7M_MPU->rbar);
-	writel((V7M_MPU_RASR_AP_RW_RW | V7M_MPU_RASR_SIZE_4GB
-		| V7M_MPU_RASR_EN), &V7M_MPU->rasr);
-	writel(V7M_MPU_CTRL_ENABLE | V7M_MPU_CTRL_HFNMIENA, &V7M_MPU->ctrl);
-
-	return 0;
-}
diff --git a/arch/arm/mach-stm32/stm32f1/timer.c b/arch/arm/mach-stm32/stm32f1/timer.c
deleted file mode 100644
index 6a261986e9..0000000000
--- a/arch/arm/mach-stm32/stm32f1/timer.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * (C) Copyright 2015
- * Kamil Lulko, <kamil.lulko@gmail.com>
- *
- * Copyright 2015 ATS Advanced Telematics Systems GmbH
- * Copyright 2015 Konsulko Group, Matt Porter <mporter@konsulko.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/armv7m.h>
-#include <asm/arch/stm32.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define STM32_TIM2_BASE	(STM32_APB1PERIPH_BASE + 0x0000)
-
-#define RCC_APB1ENR_TIM2EN	(1 << 0)
-
-struct stm32_tim2_5 {
-	u32 cr1;
-	u32 cr2;
-	u32 smcr;
-	u32 dier;
-	u32 sr;
-	u32 egr;
-	u32 ccmr1;
-	u32 ccmr2;
-	u32 ccer;
-	u32 cnt;
-	u32 psc;
-	u32 arr;
-	u32 reserved1;
-	u32 ccr1;
-	u32 ccr2;
-	u32 ccr3;
-	u32 ccr4;
-	u32 reserved2;
-	u32 dcr;
-	u32 dmar;
-	u32 or;
-};
-
-#define TIM_CR1_CEN	(1 << 0)
-
-#define TIM_EGR_UG	(1 << 0)
-
-int timer_init(void)
-{
-	struct stm32_tim2_5 *tim = (struct stm32_tim2_5 *)STM32_TIM2_BASE;
-
-	setbits_le32(&STM32_RCC->apb1enr, RCC_APB1ENR_TIM2EN);
-
-	if (clock_get(CLOCK_AHB) == clock_get(CLOCK_APB1))
-		writel((clock_get(CLOCK_APB1) / CONFIG_SYS_HZ_CLOCK) - 1,
-		       &tim->psc);
-	else
-		writel(((clock_get(CLOCK_APB1) * 2) / CONFIG_SYS_HZ_CLOCK) - 1,
-		       &tim->psc);
-
-	writel(0xFFFFFFFF, &tim->arr);
-	writel(TIM_CR1_CEN, &tim->cr1);
-	setbits_le32(&tim->egr, TIM_EGR_UG);
-
-	gd->arch.tbl = 0;
-	gd->arch.tbu = 0;
-	gd->arch.lastinc = 0;
-
-	return 0;
-}
-
-ulong get_timer(ulong base)
-{
-	return (get_ticks() / (CONFIG_SYS_HZ_CLOCK / CONFIG_SYS_HZ)) - base;
-}
-
-unsigned long long get_ticks(void)
-{
-	struct stm32_tim2_5 *tim = (struct stm32_tim2_5 *)STM32_TIM2_BASE;
-	u32 now;
-
-	now = readl(&tim->cnt);
-
-	if (now >= gd->arch.lastinc)
-		gd->arch.tbl += (now - gd->arch.lastinc);
-	else
-		gd->arch.tbl += (0xFFFFFFFF - gd->arch.lastinc) + now;
-
-	gd->arch.lastinc = now;
-
-	return gd->arch.tbl;
-}
-
-void reset_timer(void)
-{
-	struct stm32_tim2_5 *tim = (struct stm32_tim2_5 *)STM32_TIM2_BASE;
-
-	gd->arch.lastinc = readl(&tim->cnt);
-	gd->arch.tbl = 0;
-}
-
-/* delay x useconds */
-void __udelay(ulong usec)
-{
-	unsigned long long start;
-
-	start = get_ticks();		/* get current timestamp */
-	while ((get_ticks() - start) < usec)
-		;			/* loop till time has passed */
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
- */
-ulong get_tbclk(void)
-{
-	return CONFIG_SYS_HZ_CLOCK;
-}