spi-mem: Add dirmap API from Linux

This adds the dirmap API originally introduced in
Linux commit aa167f3fed0c
("spi: spi-mem: Add a new API to support direct mapping").
This also includes several follow-up patches and fixes.

Changes from Linux include:
* Added Kconfig option
* Changed struct device to struct udevice
* Changed struct spi_mem to struct spi_slave

This patch is obtained from the following patch
https://patchwork.ozlabs.org/project/uboot/patch/20210205043924.149504-3-seanga2@gmail.com/
The corresponding Linux kernel SHA1 is aa167f3fed0c.

Signed-off-by: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>

3 files changed, 357 insertions, 0 deletions

diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 8ca9274ef4..ac91d82258 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -40,6 +40,16 @@ config SPI_MEM
 	  This extension is meant to simplify interaction with SPI memories
 	  by providing an high-level interface to send memory-like commands.
 
+config SPI_DIRMAP
+	bool "SPI direct mapping"
+	depends on SPI_MEM
+	help
+	  Enable the SPI direct mapping API. Most modern SPI controllers can
+	  directly map a SPI memory (or a portion of the SPI memory) in the CPU
+	  address space. Most of the time this brings significant performance
+	  improvements as it automates the whole process of sending SPI memory
+	  operations every time a new region is accessed.
+
 if DM_SPI
 
 config ALTERA_SPI
diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c
index 9c1ede1b61..8e8995fc53 100644
--- a/drivers/spi/spi-mem.c
+++ b/drivers/spi/spi-mem.c
@@ -21,6 +21,8 @@
 #include <spi.h>
 #include <spi-mem.h>
 #include <dm/device_compat.h>
+#include <dm/devres.h>
+#include <linux/bug.h>
 #endif
 
 #ifndef __UBOOT__
@@ -491,6 +493,272 @@ int spi_mem_adjust_op_size(struct spi_slave *slave, struct spi_mem_op *op)
 }
 EXPORT_SYMBOL_GPL(spi_mem_adjust_op_size);
 
+static ssize_t spi_mem_no_dirmap_read(struct spi_mem_dirmap_desc *desc,
+				      u64 offs, size_t len, void *buf)
+{
+	struct spi_mem_op op = desc->info.op_tmpl;
+	int ret;
+
+	op.addr.val = desc->info.offset + offs;
+	op.data.buf.in = buf;
+	op.data.nbytes = len;
+	ret = spi_mem_adjust_op_size(desc->slave, &op);
+	if (ret)
+		return ret;
+
+	ret = spi_mem_exec_op(desc->slave, &op);
+	if (ret)
+		return ret;
+
+	return op.data.nbytes;
+}
+
+static ssize_t spi_mem_no_dirmap_write(struct spi_mem_dirmap_desc *desc,
+				       u64 offs, size_t len, const void *buf)
+{
+	struct spi_mem_op op = desc->info.op_tmpl;
+	int ret;
+
+	op.addr.val = desc->info.offset + offs;
+	op.data.buf.out = buf;
+	op.data.nbytes = len;
+	ret = spi_mem_adjust_op_size(desc->slave, &op);
+	if (ret)
+		return ret;
+
+	ret = spi_mem_exec_op(desc->slave, &op);
+	if (ret)
+		return ret;
+
+	return op.data.nbytes;
+}
+
+/**
+ * spi_mem_dirmap_create() - Create a direct mapping descriptor
+ * @mem: SPI mem device this direct mapping should be created for
+ * @info: direct mapping information
+ *
+ * This function is creating a direct mapping descriptor which can then be used
+ * to access the memory using spi_mem_dirmap_read() or spi_mem_dirmap_write().
+ * If the SPI controller driver does not support direct mapping, this function
+ * falls back to an implementation using spi_mem_exec_op(), so that the caller
+ * doesn't have to bother implementing a fallback on his own.
+ *
+ * Return: a valid pointer in case of success, and ERR_PTR() otherwise.
+ */
+struct spi_mem_dirmap_desc *
+spi_mem_dirmap_create(struct spi_slave *slave,
+		      const struct spi_mem_dirmap_info *info)
+{
+	struct udevice *bus = slave->dev->parent;
+	struct dm_spi_ops *ops = spi_get_ops(bus);
+	struct spi_mem_dirmap_desc *desc;
+	int ret = -EOPNOTSUPP;
+
+	/* Make sure the number of address cycles is between 1 and 8 bytes. */
+	if (!info->op_tmpl.addr.nbytes || info->op_tmpl.addr.nbytes > 8)
+		return ERR_PTR(-EINVAL);
+
+	/* data.dir should either be SPI_MEM_DATA_IN or SPI_MEM_DATA_OUT. */
+	if (info->op_tmpl.data.dir == SPI_MEM_NO_DATA)
+		return ERR_PTR(-EINVAL);
+
+	desc = kzalloc(sizeof(*desc), GFP_KERNEL);
+	if (!desc)
+		return ERR_PTR(-ENOMEM);
+
+	desc->slave = slave;
+	desc->info = *info;
+	if (ops->mem_ops && ops->mem_ops->dirmap_create)
+		ret = ops->mem_ops->dirmap_create(desc);
+
+	if (ret) {
+		desc->nodirmap = true;
+		if (!spi_mem_supports_op(desc->slave, &desc->info.op_tmpl))
+			ret = -EOPNOTSUPP;
+		else
+			ret = 0;
+	}
+
+	if (ret) {
+		kfree(desc);
+		return ERR_PTR(ret);
+	}
+
+	return desc;
+}
+EXPORT_SYMBOL_GPL(spi_mem_dirmap_create);
+
+/**
+ * spi_mem_dirmap_destroy() - Destroy a direct mapping descriptor
+ * @desc: the direct mapping descriptor to destroy
+ *
+ * This function destroys a direct mapping descriptor previously created by
+ * spi_mem_dirmap_create().
+ */
+void spi_mem_dirmap_destroy(struct spi_mem_dirmap_desc *desc)
+{
+	struct udevice *bus = desc->slave->dev->parent;
+	struct dm_spi_ops *ops = spi_get_ops(bus);
+
+	if (!desc->nodirmap && ops->mem_ops && ops->mem_ops->dirmap_destroy)
+		ops->mem_ops->dirmap_destroy(desc);
+
+	kfree(desc);
+}
+EXPORT_SYMBOL_GPL(spi_mem_dirmap_destroy);
+
+#ifndef __UBOOT__
+static void devm_spi_mem_dirmap_release(struct udevice *dev, void *res)
+{
+	struct spi_mem_dirmap_desc *desc = *(struct spi_mem_dirmap_desc **)res;
+
+	spi_mem_dirmap_destroy(desc);
+}
+
+/**
+ * devm_spi_mem_dirmap_create() - Create a direct mapping descriptor and attach
+ *				  it to a device
+ * @dev: device the dirmap desc will be attached to
+ * @mem: SPI mem device this direct mapping should be created for
+ * @info: direct mapping information
+ *
+ * devm_ variant of the spi_mem_dirmap_create() function. See
+ * spi_mem_dirmap_create() for more details.
+ *
+ * Return: a valid pointer in case of success, and ERR_PTR() otherwise.
+ */
+struct spi_mem_dirmap_desc *
+devm_spi_mem_dirmap_create(struct udevice *dev, struct spi_slave *slave,
+			   const struct spi_mem_dirmap_info *info)
+{
+	struct spi_mem_dirmap_desc **ptr, *desc;
+
+	ptr = devres_alloc(devm_spi_mem_dirmap_release, sizeof(*ptr),
+			   GFP_KERNEL);
+	if (!ptr)
+		return ERR_PTR(-ENOMEM);
+
+	desc = spi_mem_dirmap_create(slave, info);
+	if (IS_ERR(desc)) {
+		devres_free(ptr);
+	} else {
+		*ptr = desc;
+		devres_add(dev, ptr);
+	}
+
+	return desc;
+}
+EXPORT_SYMBOL_GPL(devm_spi_mem_dirmap_create);
+
+static int devm_spi_mem_dirmap_match(struct udevice *dev, void *res, void *data)
+{
+	struct spi_mem_dirmap_desc **ptr = res;
+
+	if (WARN_ON(!ptr || !*ptr))
+		return 0;
+
+	return *ptr == data;
+}
+
+/**
+ * devm_spi_mem_dirmap_destroy() - Destroy a direct mapping descriptor attached
+ *				   to a device
+ * @dev: device the dirmap desc is attached to
+ * @desc: the direct mapping descriptor to destroy
+ *
+ * devm_ variant of the spi_mem_dirmap_destroy() function. See
+ * spi_mem_dirmap_destroy() for more details.
+ */
+void devm_spi_mem_dirmap_destroy(struct udevice *dev,
+				 struct spi_mem_dirmap_desc *desc)
+{
+	devres_release(dev, devm_spi_mem_dirmap_release,
+		       devm_spi_mem_dirmap_match, desc);
+}
+EXPORT_SYMBOL_GPL(devm_spi_mem_dirmap_destroy);
+#endif /* __UBOOT__ */
+
+/**
+ * spi_mem_dirmap_read() - Read data through a direct mapping
+ * @desc: direct mapping descriptor
+ * @offs: offset to start reading from. Note that this is not an absolute
+ *	  offset, but the offset within the direct mapping which already has
+ *	  its own offset
+ * @len: length in bytes
+ * @buf: destination buffer. This buffer must be DMA-able
+ *
+ * This function reads data from a memory device using a direct mapping
+ * previously instantiated with spi_mem_dirmap_create().
+ *
+ * Return: the amount of data read from the memory device or a negative error
+ * code. Note that the returned size might be smaller than @len, and the caller
+ * is responsible for calling spi_mem_dirmap_read() again when that happens.
+ */
+ssize_t spi_mem_dirmap_read(struct spi_mem_dirmap_desc *desc,
+			    u64 offs, size_t len, void *buf)
+{
+	struct udevice *bus = desc->slave->dev->parent;
+	struct dm_spi_ops *ops = spi_get_ops(bus);
+	ssize_t ret;
+
+	if (desc->info.op_tmpl.data.dir != SPI_MEM_DATA_IN)
+		return -EINVAL;
+
+	if (!len)
+		return 0;
+
+	if (desc->nodirmap)
+		ret = spi_mem_no_dirmap_read(desc, offs, len, buf);
+	else if (ops->mem_ops && ops->mem_ops->dirmap_read)
+		ret = ops->mem_ops->dirmap_read(desc, offs, len, buf);
+	else
+		ret = -EOPNOTSUPP;
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(spi_mem_dirmap_read);
+
+/**
+ * spi_mem_dirmap_write() - Write data through a direct mapping
+ * @desc: direct mapping descriptor
+ * @offs: offset to start writing from. Note that this is not an absolute
+ *	  offset, but the offset within the direct mapping which already has
+ *	  its own offset
+ * @len: length in bytes
+ * @buf: source buffer. This buffer must be DMA-able
+ *
+ * This function writes data to a memory device using a direct mapping
+ * previously instantiated with spi_mem_dirmap_create().
+ *
+ * Return: the amount of data written to the memory device or a negative error
+ * code. Note that the returned size might be smaller than @len, and the caller
+ * is responsible for calling spi_mem_dirmap_write() again when that happens.
+ */
+ssize_t spi_mem_dirmap_write(struct spi_mem_dirmap_desc *desc,
+			     u64 offs, size_t len, const void *buf)
+{
+	struct udevice *bus = desc->slave->dev->parent;
+	struct dm_spi_ops *ops = spi_get_ops(bus);
+	ssize_t ret;
+
+	if (desc->info.op_tmpl.data.dir != SPI_MEM_DATA_OUT)
+		return -EINVAL;
+
+	if (!len)
+		return 0;
+
+	if (desc->nodirmap)
+		ret = spi_mem_no_dirmap_write(desc, offs, len, buf);
+	else if (ops->mem_ops && ops->mem_ops->dirmap_write)
+		ret = ops->mem_ops->dirmap_write(desc, offs, len, buf);
+	else
+		ret = -EOPNOTSUPP;
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(spi_mem_dirmap_write);
+
 #ifndef __UBOOT__
 static inline struct spi_mem_driver *to_spi_mem_drv(struct device_driver *drv)
 {
diff --git a/include/spi-mem.h b/include/spi-mem.h
index 32ffdc2e0f..b07cf2ed83 100644
--- a/include/spi-mem.h
+++ b/include/spi-mem.h
@@ -134,6 +134,48 @@ struct spi_mem_op {
 		.dummy = __dummy,				\
 		.data = __data,					\
 	}
+/**
+ * struct spi_mem_dirmap_info - Direct mapping information
+ * @op_tmpl: operation template that should be used by the direct mapping when
+ *	     the memory device is accessed
+ * @offset: absolute offset this direct mapping is pointing to
+ * @length: length in byte of this direct mapping
+ *
+ * This information is used by the controller specific implementation to know
+ * the portion of memory that is directly mapped and the spi_mem_op that should
+ * be used to access the device.
+ * A direct mapping is only valid for one direction (read or write) and this
+ * direction is directly encoded in the ->op_tmpl.data.dir field.
+ */
+struct spi_mem_dirmap_info {
+	struct spi_mem_op op_tmpl;
+	u64 offset;
+	u64 length;
+};
+
+/**
+ * struct spi_mem_dirmap_desc - Direct mapping descriptor
+ * @mem: the SPI memory device this direct mapping is attached to
+ * @info: information passed at direct mapping creation time
+ * @nodirmap: set to 1 if the SPI controller does not implement
+ *            ->mem_ops->dirmap_create() or when this function returned an
+ *            error. If @nodirmap is true, all spi_mem_dirmap_{read,write}()
+ *            calls will use spi_mem_exec_op() to access the memory. This is a
+ *            degraded mode that allows spi_mem drivers to use the same code
+ *            no matter whether the controller supports direct mapping or not
+ * @priv: field pointing to controller specific data
+ *
+ * Common part of a direct mapping descriptor. This object is created by
+ * spi_mem_dirmap_create() and controller implementation of ->create_dirmap()
+ * can create/attach direct mapping resources to the descriptor in the ->priv
+ * field.
+ */
+struct spi_mem_dirmap_desc {
+	struct spi_slave *slave;
+	struct spi_mem_dirmap_info info;
+	unsigned int nodirmap;
+	void *priv;
+};
 
 #ifndef __UBOOT__
 /**
@@ -183,10 +225,32 @@ static inline void *spi_mem_get_drvdata(struct spi_mem *mem)
  *		    limitations)
  * @supports_op: check if an operation is supported by the controller
  * @exec_op: execute a SPI memory operation
+ * @dirmap_create: create a direct mapping descriptor that can later be used to
+ *		   access the memory device. This method is optional
+ * @dirmap_destroy: destroy a memory descriptor previous created by
+ *		    ->dirmap_create()
+ * @dirmap_read: read data from the memory device using the direct mapping
+ *		 created by ->dirmap_create(). The function can return less
+ *		 data than requested (for example when the request is crossing
+ *		 the currently mapped area), and the caller of
+ *		 spi_mem_dirmap_read() is responsible for calling it again in
+ *		 this case.
+ * @dirmap_write: write data to the memory device using the direct mapping
+ *		  created by ->dirmap_create(). The function can return less
+ *		  data than requested (for example when the request is crossing
+ *		  the currently mapped area), and the caller of
+ *		  spi_mem_dirmap_write() is responsible for calling it again in
+ *		  this case.
  *
  * This interface should be implemented by SPI controllers providing an
  * high-level interface to execute SPI memory operation, which is usually the
  * case for QSPI controllers.
+ *
+ * Note on ->dirmap_{read,write}(): drivers should avoid accessing the direct
+ * mapping from the CPU because doing that can stall the CPU waiting for the
+ * SPI mem transaction to finish, and this will make real-time maintainers
+ * unhappy and might make your system less reactive. Instead, drivers should
+ * use DMA to access this direct mapping.
  */
 struct spi_controller_mem_ops {
 	int (*adjust_op_size)(struct spi_slave *slave, struct spi_mem_op *op);
@@ -194,6 +258,12 @@ struct spi_controller_mem_ops {
 			    const struct spi_mem_op *op);
 	int (*exec_op)(struct spi_slave *slave,
 		       const struct spi_mem_op *op);
+	int (*dirmap_create)(struct spi_mem_dirmap_desc *desc);
+	void (*dirmap_destroy)(struct spi_mem_dirmap_desc *desc);
+	ssize_t (*dirmap_read)(struct spi_mem_dirmap_desc *desc,
+			       u64 offs, size_t len, void *buf);
+	ssize_t (*dirmap_write)(struct spi_mem_dirmap_desc *desc,
+				u64 offs, size_t len, const void *buf);
 };
 
 #ifndef __UBOOT__
@@ -260,6 +330,15 @@ int spi_mem_exec_op(struct spi_slave *slave, const struct spi_mem_op *op);
 bool spi_mem_default_supports_op(struct spi_slave *mem,
 				 const struct spi_mem_op *op);
 
+struct spi_mem_dirmap_desc *
+spi_mem_dirmap_create(struct spi_slave *mem,
+		      const struct spi_mem_dirmap_info *info);
+void spi_mem_dirmap_destroy(struct spi_mem_dirmap_desc *desc);
+ssize_t spi_mem_dirmap_read(struct spi_mem_dirmap_desc *desc,
+			    u64 offs, size_t len, void *buf);
+ssize_t spi_mem_dirmap_write(struct spi_mem_dirmap_desc *desc,
+			     u64 offs, size_t len, const void *buf);
+
 #ifndef __UBOOT__
 int spi_mem_driver_register_with_owner(struct spi_mem_driver *drv,
 				       struct module *owner);