spl: Ensure all SPL symbols in Kconfig have some SPL dependency

Tighten up symbol dependencies in a number of places.  Ensure that a SPL
specific option has at least a direct dependency on SPL.  In places
where it's clear that we depend on something more specific, use that
dependency instead.  This means in a very small number of places we can
drop redundant dependencies.

Reported-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

27 files changed, 50 insertions, 36 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index ef79fc3a0a..423fca27de 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1119,7 +1119,6 @@ config ARCH_SOCFPGA
 	select SPL_DM_SERIAL
 	select SPL_LIBCOMMON_SUPPORT
 	select SPL_LIBGENERIC_SUPPORT
-	select SPL_NAND_SUPPORT if SPL_NAND_DENALI
 	select SPL_OF_CONTROL
 	select SPL_SEPARATE_BSS if TARGET_SOCFPGA_SOC64
 	select SPL_SERIAL
diff --git a/arch/arm/cpu/armv8/Kconfig b/arch/arm/cpu/armv8/Kconfig
index 72d12b4e07..1305238c9d 100644
--- a/arch/arm/cpu/armv8/Kconfig
+++ b/arch/arm/cpu/armv8/Kconfig
@@ -76,6 +76,7 @@ config ARMV8_SEC_FIRMWARE_SUPPORT
 
 config SPL_ARMV8_SEC_FIRMWARE_SUPPORT
 	bool "Enable ARMv8 secure monitor firmware framework support for SPL"
+	depends on SPL
 	select SPL_FIT
 	select SPL_OF_LIBFDT
 	help
@@ -83,6 +84,7 @@ config SPL_ARMV8_SEC_FIRMWARE_SUPPORT
 
 config SPL_RECOVER_DATA_SECTION
 	bool "save/restore SPL data section"
+	depends on SPL
 	help
 	  Say Y here to save SPL data section for cold boot, and restore
 	  at warm boot in SPL phase.
diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig
index 8f185c192d..2ba7454457 100644
--- a/arch/arm/mach-imx/imx8/Kconfig
+++ b/arch/arm/mach-imx/imx8/Kconfig
@@ -20,13 +20,13 @@ config MU_BASE_SPL
 config IMX8QM
 	select IMX8
 	select SUPPORT_SPL
-	select SPL_RECOVER_DATA_SECTION
+	select SPL_RECOVER_DATA_SECTION if SPL
 	bool
 
 config IMX8QXP
 	select IMX8
 	select SUPPORT_SPL
-	select SPL_RECOVER_DATA_SECTION
+	select SPL_RECOVER_DATA_SECTION if SPL
 	bool
 
 config SYS_SOC
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 1ac43e98bb..7e86c6a0cd 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -945,6 +945,7 @@ config ACPI_GPE
 
 config SPL_ACPI_GPE
 	bool "Support ACPI general-purpose events in SPL"
+	depends on SPL
 	help
 	  Enable a driver for ACPI GPEs to allow peripherals to send interrupts
 	  via ACPI to the OS. In U-Boot this is only used when U-Boot itself
diff --git a/boot/Kconfig b/boot/Kconfig
index 945ef1ca13..ee0dc90e93 100644
--- a/boot/Kconfig
+++ b/boot/Kconfig
@@ -626,7 +626,7 @@ config BOOTSTAGE
 
 config SPL_BOOTSTAGE
 	bool "Boot timing and reported in SPL"
-	depends on BOOTSTAGE
+	depends on BOOTSTAGE && SPL
 	help
 	  Enable recording of boot time in SPL. To make this visible to U-Boot
 	  proper, enable BOOTSTAGE_STASH as well. This will stash the timing
diff --git a/common/Kconfig b/common/Kconfig
index f08a8e7493..e7914ca750 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -83,6 +83,7 @@ config LOGLEVEL
 
 config SPL_LOGLEVEL
 	int
+	depends on SPL
 	default LOGLEVEL
 
 config TPL_LOGLEVEL
@@ -358,7 +359,7 @@ config LOG_SYSLOG
 
 config SPL_LOG
 	bool "Enable logging support in SPL"
-	depends on LOG
+	depends on LOG && SPL
 	help
 	  This enables support for logging of status and debug messages. These
 	  can be displayed on the console, recorded in a memory buffer, or
diff --git a/configs/at91sam9n12ek_nandflash_defconfig b/configs/at91sam9n12ek_nandflash_defconfig
index 18ec990fe3..5ffa294482 100644
--- a/configs/at91sam9n12ek_nandflash_defconfig
+++ b/configs/at91sam9n12ek_nandflash_defconfig
@@ -48,9 +48,7 @@ CONFIG_AT91_GPIO=y
 CONFIG_GENERIC_ATMEL_MCI=y
 CONFIG_MTD=y
 CONFIG_NAND_ATMEL=y
-CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER=y
-CONFIG_SYS_NAND_PAGE_SIZE=0x800
-CONFIG_SYS_NAND_OOBSIZE=0x40
+CONFIG_ATMEL_NAND_HW_PMECC=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SF_DEFAULT_SPEED=30000000
 CONFIG_SPI_FLASH_ATMEL=y
diff --git a/configs/at91sam9x5ek_dataflash_defconfig b/configs/at91sam9x5ek_dataflash_defconfig
index 6e36b60ce0..da37fb507a 100644
--- a/configs/at91sam9x5ek_dataflash_defconfig
+++ b/configs/at91sam9x5ek_dataflash_defconfig
@@ -55,9 +55,7 @@ CONFIG_GENERIC_ATMEL_MCI=y
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_NAND_ATMEL=y
-CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER=y
-CONFIG_SYS_NAND_PAGE_SIZE=0x800
-CONFIG_SYS_NAND_OOBSIZE=0x40
+CONFIG_ATMEL_NAND_HW_PMECC=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SF_DEFAULT_SPEED=30000000
 CONFIG_SPI_FLASH_ATMEL=y
diff --git a/configs/at91sam9x5ek_nandflash_defconfig b/configs/at91sam9x5ek_nandflash_defconfig
index a32eb130f1..9d581734f9 100644
--- a/configs/at91sam9x5ek_nandflash_defconfig
+++ b/configs/at91sam9x5ek_nandflash_defconfig
@@ -54,9 +54,7 @@ CONFIG_AT91_GPIO=y
 CONFIG_GENERIC_ATMEL_MCI=y
 CONFIG_MTD=y
 CONFIG_NAND_ATMEL=y
-CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER=y
-CONFIG_SYS_NAND_PAGE_SIZE=0x800
-CONFIG_SYS_NAND_OOBSIZE=0x40
+CONFIG_ATMEL_NAND_HW_PMECC=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SF_DEFAULT_SPEED=30000000
 CONFIG_SPI_FLASH_ATMEL=y
diff --git a/configs/sama5d36ek_cmp_nandflash_defconfig b/configs/sama5d36ek_cmp_nandflash_defconfig
index 0139ebefe2..2fd58b07bd 100644
--- a/configs/sama5d36ek_cmp_nandflash_defconfig
+++ b/configs/sama5d36ek_cmp_nandflash_defconfig
@@ -53,11 +53,9 @@ CONFIG_AT91_GPIO=y
 CONFIG_GENERIC_ATMEL_MCI=y
 CONFIG_MTD=y
 CONFIG_NAND_ATMEL=y
+CONFIG_ATMEL_NAND_HW_PMECC=y
 CONFIG_PMECC_CAP=4
-CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER=y
 CONFIG_SYS_NAND_ONFI_DETECTION=y
-CONFIG_SYS_NAND_PAGE_SIZE=0x800
-CONFIG_SYS_NAND_OOBSIZE=0x40
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SF_DEFAULT_SPEED=30000000
 CONFIG_SPI_FLASH_ATMEL=y
diff --git a/configs/socfpga_secu1_defconfig b/configs/socfpga_secu1_defconfig
index 72cf0d1bc8..4a244e17bc 100644
--- a/configs/socfpga_secu1_defconfig
+++ b/configs/socfpga_secu1_defconfig
@@ -42,6 +42,7 @@ CONFIG_SPL_STACK=0x0
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=0x1
 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE is not set
 CONFIG_SPL_MTD_SUPPORT=y
+CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_SYS_MAXARGS=32
 CONFIG_CMD_ASKENV=y
 CONFIG_CMD_GREPENV=y
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index f10d1aaf4b..eae1c8ddc9 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -3,7 +3,7 @@ config FIRMWARE
 
 config SPL_FIRMWARE
 	bool "Enable Firmware driver support in SPL"
-	depends on FIRMWARE
+	depends on FIRMWARE && SPL
 
 config SPL_ARM_PSCI_FW
 	bool
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 149a62ffe6..8ab22ed817 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -89,7 +89,7 @@ config DM_GPIO_LOOKUP_LABEL
 
 config SPL_DM_GPIO_LOOKUP_LABEL
 	bool "Enable searching for gpio labelnames"
-	depends on DM_GPIO && SPL_DM && SPL_GPIO
+	depends on SPL_DM_GPIO
 	help
 	  This option enables searching for gpio names in
 	  the defined gpio labels, if the search for the
@@ -490,7 +490,7 @@ config DM_PCA953X
 
 config SPL_DM_PCA953X
 	bool "PCA95[357]x, PCA9698, TCA64xx, and MAX7310 I/O ports in SPL"
-	depends on DM_GPIO
+	depends on SPL_DM_GPIO
 	help
 	  Say yes here to provide access to several register-oriented
 	  SMBus I/O expanders, made mostly by NXP or TI.  Compatible
diff --git a/drivers/i2c/muxes/Kconfig b/drivers/i2c/muxes/Kconfig
index 39683fc43b..323c4fbe9c 100644
--- a/drivers/i2c/muxes/Kconfig
+++ b/drivers/i2c/muxes/Kconfig
@@ -9,7 +9,7 @@ config I2C_MUX
 
 config SPL_I2C_MUX
 	bool "Support I2C multiplexers on SPL"
-	depends on I2C_MUX
+	depends on SPL && I2C_MUX
 	help
 	  This enables I2C buses to be multiplexed, so that you can select
 	  one of several buses using some sort of control mechanism. The
diff --git a/drivers/led/Kconfig b/drivers/led/Kconfig
index 418ed215c5..ccdd7d7395 100644
--- a/drivers/led/Kconfig
+++ b/drivers/led/Kconfig
@@ -67,7 +67,7 @@ config LED_BLINK
 
 config SPL_LED
 	bool "Enable LED support in SPL"
-	depends on SPL && SPL_DM
+	depends on SPL_DM
 	help
 	  The LED subsystem adds a small amount of overhead to the image.
 	  If this is acceptable and you have a need to use LEDs in SPL,
@@ -85,7 +85,7 @@ config LED_GPIO
 
 config SPL_LED_GPIO
 	bool "LED support for GPIO-connected LEDs in SPL"
-        depends on SPL_LED && DM_GPIO
+        depends on SPL_LED && SPL_DM_GPIO
 	help
 	  This option is an SPL-variant of the LED_GPIO option.
 	  See the help of LED_GPIO for details.
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index b44cd98150..fd44421931 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -123,6 +123,7 @@ config MMC_IO_VOLTAGE
 
 config SPL_MMC_IO_VOLTAGE
 	bool "Support IO voltage configuration in SPL"
+	depends on SPL_MMC
 	help
 	  IO voltage configuration allows selecting the voltage level of the IO
 	  lines (not the level of main supply). This is required for UHS
@@ -153,6 +154,7 @@ config MMC_HS400_ES_SUPPORT
 
 config SPL_MMC_HS400_ES_SUPPORT
 	bool "enable HS400 Enhanced Strobe support in SPL"
+	depends on SPL_MMC
 	help
 	  The HS400 Enhanced Strobe mode is support by some eMMC. The bus
 	  frequency is up to 200MHz. This mode does not tune the IO.
@@ -166,6 +168,7 @@ config MMC_HS400_SUPPORT
 
 config SPL_MMC_HS400_SUPPORT
 	bool "enable HS400 support in SPL"
+	depends on SPL_MMC
 	select SPL_MMC_HS200_SUPPORT
 	help
 	  The HS400 mode is support by some eMMC. The bus frequency is up to
@@ -179,6 +182,7 @@ config MMC_HS200_SUPPORT
 
 config SPL_MMC_HS200_SUPPORT
 	bool "enable HS200 support in SPL"
+	depends on SPL_MMC
 	help
 	  The HS200 mode is support by some eMMC. The bus frequency is up to
 	  200MHz. This mode requires tuning the IO.
@@ -478,7 +482,7 @@ config MMC_SDHCI_ADMA
 
 config SPL_MMC_SDHCI_ADMA
 	bool "Support SDHCI ADMA2 in SPL"
-	depends on MMC_SDHCI
+	depends on SPL_MMC && MMC_SDHCI
 	select MMC_SDHCI_ADMA_HELPERS
 	help
 	  This enables support for the ADMA (Advanced DMA) defined
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index 4129a33866..190300fc17 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -73,6 +73,7 @@ config PMECC_SECTOR_SIZE
 
 config SPL_GENERATE_ATMEL_PMECC_HEADER
 	bool "Atmel PMECC Header Generation"
+	depends on SPL
 	select ATMEL_NAND_HWECC
 	select ATMEL_NAND_HW_PMECC
 	help
@@ -647,7 +648,7 @@ config SYS_NAND_U_BOOT_OFFS_REDUND
 
 config SPL_NAND_AM33XX_BCH
 	bool "Enables SPL-NAND driver which supports ELM based"
-	depends on NAND_OMAP_GPMC && !OMAP34XX
+	depends on SPL_NAND_SUPPORT && NAND_OMAP_GPMC && !OMAP34XX
 	default y
         help
 	  Hardware ECC correction. This is useful for platforms which have ELM
@@ -658,6 +659,7 @@ config SPL_NAND_AM33XX_BCH
 
 config SPL_NAND_DENALI
 	bool "Support Denali NAND controller for SPL"
+	depends on SPL_NAND_SUPPORT
 	help
 	  This is a small implementation of the Denali NAND controller
 	  for use on SPL.
@@ -673,7 +675,7 @@ config NAND_DENALI_SPARE_AREA_SKIP_BYTES
 
 config SPL_NAND_SIMPLE
 	bool "Use simple SPL NAND driver"
-	depends on !SPL_NAND_AM33XX_BCH
+	depends on !SPL_NAND_AM33XX_BCH && SPL_NAND_SUPPORT
 	help
 	  Support for NAND boot using simple NAND drivers that
 	  expose the cmd_ctrl() interface.
diff --git a/drivers/mtd/spi/Kconfig b/drivers/mtd/spi/Kconfig
index f350c7e5dc..f83876c576 100644
--- a/drivers/mtd/spi/Kconfig
+++ b/drivers/mtd/spi/Kconfig
@@ -248,7 +248,7 @@ config SPI_FLASH_MTD
 
 config SPL_SPI_FLASH_MTD
 	bool "SPI flash MTD support for SPL"
-	depends on SPI_FLASH
+	depends on SPI_FLASH && SPL
 	help
           Enable the MTD support for the SPI flash layer in SPL.
 
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 2c20dc7c83..0af53a6c67 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -29,6 +29,7 @@ config POWER_LEGACY
 
 config SPL_POWER_LEGACY
 	bool "Legacy power support in SPL"
+	depends on SPL && !SPL_DM_PMIC
 	default y if POWER_LEGACY
 	help
 	  Note: This is a legacy option. Use SPL_DM_PMIC instead.
diff --git a/drivers/power/acpi_pmc/Kconfig b/drivers/power/acpi_pmc/Kconfig
index 355d1618c6..629acb0714 100644
--- a/drivers/power/acpi_pmc/Kconfig
+++ b/drivers/power/acpi_pmc/Kconfig
@@ -8,6 +8,7 @@ config ACPI_PMC
 
 config SPL_ACPI_PMC
 	bool "Power Manager (x86 PMC) support in SPL"
+	depends on SPL
 	default y if ACPI_PMC
 	help
 	  Enable support for an x86-style power-management controller which
diff --git a/drivers/power/regulator/Kconfig b/drivers/power/regulator/Kconfig
index d6cea8ec66..c519e066ef 100644
--- a/drivers/power/regulator/Kconfig
+++ b/drivers/power/regulator/Kconfig
@@ -55,7 +55,7 @@ config DM_REGULATOR_BD71837
 
 config SPL_DM_REGULATOR_BD71837
 	bool "Enable Driver Model for ROHM BD71837/BD71847 regulators in SPL"
-	depends on DM_REGULATOR_BD71837
+	depends on DM_REGULATOR_BD71837 && SPL
 	help
 	This config enables implementation of driver-model regulator uclass
 	features for regulators on ROHM BD71837 and BD71847 in SPL.
@@ -70,7 +70,7 @@ config DM_REGULATOR_PCA9450
 
 config SPL_DM_REGULATOR_PCA9450
 	bool "Enable Driver Model for NXP PCA9450 regulators in SPL"
-	depends on DM_REGULATOR_PCA9450
+	depends on DM_REGULATOR_PCA9450 && SPL
 	help
 	This config enables implementation of driver-model regulator uclass
 	features for regulators on ROHM PCA9450 in SPL.
@@ -115,7 +115,7 @@ config REGULATOR_PWM
 
 config SPL_REGULATOR_PWM
 	bool "Enable Driver for PWM regulators in SPL"
-	depends on REGULATOR_PWM
+	depends on REGULATOR_PWM && SPL
 	help
 	  This config enables implementation of driver-model regulator uclass
 	  features for PWM regulators in SPL.
@@ -163,7 +163,7 @@ config DM_REGULATOR_FIXED
 
 config SPL_DM_REGULATOR_FIXED
 	bool "Enable Driver Model for REGULATOR Fixed value in SPL"
-	depends on DM_REGULATOR_FIXED
+	depends on DM_REGULATOR_FIXED && SPL
 	select SPL_DM_REGULATOR_COMMON
 	---help---
 	This config enables implementation of driver-model regulator uclass
@@ -345,7 +345,7 @@ config SPL_DM_REGULATOR_STPMIC1
 
 config SPL_DM_REGULATOR_PALMAS
 	bool "Enable driver for PALMAS PMIC regulators"
-       depends on SPL_PMIC_PALMAS
+	depends on SPL_PMIC_PALMAS
 	help
 	This enables implementation of driver-model regulator uclass
 	features for REGULATOR PALMAS and the family of PALMAS PMICs.
@@ -353,7 +353,7 @@ config SPL_DM_REGULATOR_PALMAS
 
 config SPL_DM_REGULATOR_LP87565
 	bool "Enable driver for LP87565 PMIC regulators"
-       depends on SPL_PMIC_LP87565
+	depends on SPL_PMIC_LP87565
 	help
 	This enables implementation of driver-model regulator uclass
 	features for REGULATOR LP87565 and the family of LP87565 PMICs.
diff --git a/fs/cbfs/Kconfig b/fs/cbfs/Kconfig
index 03980d830d..b6639928f4 100644
--- a/fs/cbfs/Kconfig
+++ b/fs/cbfs/Kconfig
@@ -9,6 +9,7 @@ config FS_CBFS
 
 config SPL_FS_CBFS
 	bool "Enable CBFS (Coreboot Filesystem) in SPL"
+	depends on SPL
 	help
 	  Define this to enable support for reading from a Coreboot
 	  filesystem. This is a ROM-based filesystem used for accessing files
diff --git a/lib/Kconfig b/lib/Kconfig
index c9f9ddce7d..7dd777b56a 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -239,6 +239,7 @@ config GENERATE_ACPI_TABLE
 
 config SPL_TINY_MEMSET
 	bool "Use a very small memset() in SPL"
+	depends on SPL
 	help
 	  The faster memset() is the arch-specific one (if available) enabled
 	  by CONFIG_USE_ARCH_MEMSET. If that is not enabled, we can still get
@@ -557,6 +558,7 @@ config MD5
 
 config SPL_MD5
 	bool "Support MD5 algorithm in SPL"
+	depends on SPL
 	help
 	  This option enables MD5 support in SPL. MD5 is an algorithm designed
 	  in 1991 that produces a 16-byte digest (or checksum) from its input
@@ -643,6 +645,7 @@ config ZSTD
 
 config SPL_LZ4
 	bool "Enable LZ4 decompression support in SPL"
+	depends on SPL
 	help
 	  This enables support for the LZ4 decompression algorithm in SPL. LZ4
 	  is a lossless data compression algorithm that is focused on
@@ -651,6 +654,7 @@ config SPL_LZ4
 
 config SPL_LZMA
 	bool "Enable LZMA decompression support for SPL build"
+	depends on SPL
 	help
 	  This enables support for LZMA compression algorithm for SPL boot.
 
@@ -662,6 +666,7 @@ config VPL_LZMA
 
 config SPL_LZO
 	bool "Enable LZO decompression support in SPL"
+	depends on SPL
 	help
 	  This enables support for LZO compression algorithm in the SPL.
 
@@ -678,6 +683,7 @@ config SPL_ZLIB
 
 config SPL_ZSTD
 	bool "Enable Zstandard decompression support in SPL"
+	depends on SPL
 	select XXHASH
 	help
 	  This enables Zstandard decompression library in the SPL.
@@ -750,7 +756,7 @@ config SPL_OF_LIBFDT
 
 config SPL_OF_LIBFDT_ASSUME_MASK
 	hex "Mask of conditions to assume for libfdt"
-	depends on SPL_OF_LIBFDT || FIT
+	depends on SPL_OF_LIBFDT || (FIT && SPL)
 	default 0xff
 	help
 	  Use this to change the assumptions made by libfdt in SPL about the
diff --git a/lib/crypto/Kconfig b/lib/crypto/Kconfig
index 1c04a7ec5f..152eb2a9ca 100644
--- a/lib/crypto/Kconfig
+++ b/lib/crypto/Kconfig
@@ -28,7 +28,7 @@ config ASYMMETRIC_PUBLIC_KEY_SUBTYPE
 
 config SPL_ASYMMETRIC_PUBLIC_KEY_SUBTYPE
 	bool "Asymmetric public-key crypto algorithm subtype within SPL"
-	depends on ASYMMETRIC_PUBLIC_KEY_SUBTYPE
+	depends on ASYMMETRIC_PUBLIC_KEY_SUBTYPE && SPL
 	help
 	  This option provides support for asymmetric public key type handling in the SPL.
 	  If signature generation and/or verification are to be used,
@@ -48,7 +48,7 @@ config RSA_PUBLIC_KEY_PARSER
 
 config SPL_RSA_PUBLIC_KEY_PARSER
 	bool "RSA public key parser within SPL"
-	depends on ASYMMETRIC_PUBLIC_KEY_SUBTYPE
+	depends on ASYMMETRIC_PUBLIC_KEY_SUBTYPE && SPL
 	select SPL_ASN1_DECODER
 	select ASN1_COMPILER
 	select SPL_OID_REGISTRY
diff --git a/lib/ecdsa/Kconfig b/lib/ecdsa/Kconfig
index a95c4ff581..5c3d67d814 100644
--- a/lib/ecdsa/Kconfig
+++ b/lib/ecdsa/Kconfig
@@ -17,6 +17,7 @@ config ECDSA_VERIFY
 
 config SPL_ECDSA_VERIFY
 	bool "Enable ECDSA verification support in SPL"
+	depends on SPL
 	help
 	  Allow ECDSA signatures to be recognized and verified in SPL.
 
diff --git a/lib/rsa/Kconfig b/lib/rsa/Kconfig
index b773f17c26..9033384e60 100644
--- a/lib/rsa/Kconfig
+++ b/lib/rsa/Kconfig
@@ -18,6 +18,7 @@ if RSA
 
 config SPL_RSA
 	bool "Use RSA Library within SPL"
+	depends on SPL
 
 config SPL_RSA_VERIFY
 	bool
diff --git a/test/Kconfig b/test/Kconfig
index 7f3447ae5a..9b283a57ba 100644
--- a/test/Kconfig
+++ b/test/Kconfig
@@ -8,6 +8,7 @@ menuconfig UNIT_TEST
 
 config SPL_UNIT_TEST
 	bool "Unit tests in SPL"
+	depends on SPL
 	# We need to be able to unbind devices for tests to work
 	select SPL_DM_DEVICE_REMOVE
 	help