arm: Remove edminiv2 board

This board is not converted to use CONFIG_DM, well passed the migration
deadline.  Remove it.

Cc: Simon Guinot <simon.guinot@sequanux.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

7 files changed, 0 insertions, 304 deletions

diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index b8b45a048c..e677211b2e 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -6,21 +6,8 @@ config 88F5182
 config FEROCEON
 	bool
 
-choice
-	prompt "Marvell Orion board select"
-	optional
-
-config TARGET_EDMINIV2
-	bool "LaCie Ethernet Disk mini V2"
-	select 88F5182
-	select FEROCEON
-	select SUPPORT_SPL
-
-endchoice
-
 config SYS_SOC
 	default "orion5x"
 
-source "board/LaCie/edminiv2/Kconfig"
 
 endif
diff --git a/board/LaCie/edminiv2/Kconfig b/board/LaCie/edminiv2/Kconfig
deleted file mode 100644
index ac3fe3fbcb..0000000000
--- a/board/LaCie/edminiv2/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_EDMINIV2
-
-config SYS_BOARD
-	default "edminiv2"
-
-config SYS_VENDOR
-	default "LaCie"
-
-config SYS_CONFIG_NAME
-	default "edminiv2"
-
-endif
diff --git a/board/LaCie/edminiv2/MAINTAINERS b/board/LaCie/edminiv2/MAINTAINERS
deleted file mode 100644
index 055afd0e76..0000000000
--- a/board/LaCie/edminiv2/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-EDMINIV2 BOARD
-M:	Simon Guinot <simon.guinot@sequanux.org>
-S:	Maintained
-F:	board/LaCie/edminiv2/
-F:	include/configs/edminiv2.h
-F:	configs/edminiv2_defconfig
diff --git a/board/LaCie/edminiv2/Makefile b/board/LaCie/edminiv2/Makefile
deleted file mode 100644
index 5252c2b0e6..0000000000
--- a/board/LaCie/edminiv2/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net>
-#
-# Based on original Kirkwood support which is
-# (C) Copyright 2009
-# Marvell Semiconductor <www.marvell.com>
-# Written-by: Prafulla Wadaskar <prafulla@marvell.com>
-
-obj-y	:= edminiv2.o ../common/common.o
diff --git a/board/LaCie/edminiv2/edminiv2.c b/board/LaCie/edminiv2/edminiv2.c
deleted file mode 100644
index 9c066a283c..0000000000
--- a/board/LaCie/edminiv2/edminiv2.c
+++ /dev/null
@@ -1,57 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net>
- *
- * (C) Copyright 2009
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
- */
-
-#include <common.h>
-#include <miiphy.h>
-#include <net.h>
-#include <asm/arch/orion5x.h>
-#include <asm/global_data.h>
-#include "../common/common.h"
-#include <spl.h>
-#include <ns16550.h>
-#include <asm/mach-types.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_init(void)
-{
-	/* arch number of board */
-	gd->bd->bi_arch_number = MACH_TYPE_EDMINI_V2;
-
-	/* boot parameter start at 256th byte of RAM base */
-	gd->bd->bi_boot_params = gd->bd->bi_dram[0].start + 0x100;
-
-	return 0;
-}
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R)
-/* Configure and enable MV88E1116 PHY */
-void reset_phy(void)
-{
-	mv_phy_88e1116_init("egiga0", 8);
-}
-#endif /* CONFIG_RESET_PHY_R */
-
-/*
- * SPL serial setup and NOR boot device selection
- */
-
-#ifdef CONFIG_SPL_BUILD
-
-void spl_board_init(void)
-{
-	preloader_console_init();
-}
-
-u32 spl_boot_device(void)
-{
-	return BOOT_DEVICE_NOR;
-}
-
-#endif /* CONFIG_SPL_BUILD */
diff --git a/configs/edminiv2_defconfig b/configs/edminiv2_defconfig
deleted file mode 100644
index 1cd0ac020b..0000000000
--- a/configs/edminiv2_defconfig
+++ /dev/null
@@ -1,72 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_CPU_INIT=y
-CONFIG_ARCH_ORION5X=y
-CONFIG_SYS_TEXT_BASE=0x00800000
-CONFIG_SYS_MALLOC_LEN=0x40000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_SPL_LDSCRIPT="arch/arm/mach-orion5x/u-boot-spl.lds"
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x2000
-CONFIG_SPL_TEXT_BASE=0xffff0000
-CONFIG_TARGET_EDMINIV2=y
-CONFIG_SPL_SERIAL=y
-CONFIG_SPL=y
-CONFIG_IDENT_STRING=" EDMiniV2"
-CONFIG_SYS_LOAD_ADDR=0x800000
-CONFIG_ENV_ADDR=0xFFF84000
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xf40
-CONFIG_BOOTDELAY=3
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_ARCH_MISC_INIT=y
-CONFIG_RESET_PHY_R=y
-CONFIG_SPL_MAX_SIZE=0xfff0
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x20000
-CONFIG_SPL_BSS_MAX_SIZE=0x1ffff
-CONFIG_SPL_BOARD_INIT=y
-# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_STACK=0x20000
-CONFIG_SYS_SPL_MALLOC=y
-CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
-CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x40000
-CONFIG_SYS_SPL_MALLOC_SIZE=0x1ffff
-CONFIG_SPL_NOR_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_SYS_PROMPT="EDMiniV2> "
-CONFIG_SYS_PBSIZE=1051
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_IDE=y
-CONFIG_CMD_I2C=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_EXT2=y
-CONFIG_ISO_PARTITION=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_NETCONSOLE=y
-CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
-CONFIG_SYS_IDE_MAXBUS=1
-CONFIG_SYS_IDE_MAXDEVICE=1
-CONFIG_SYS_ATA_BASE_ADDR=0xf1080000
-CONFIG_SYS_ATA_STRIDE=4
-CONFIG_SYS_ATA_DATA_OFFSET=0x100
-CONFIG_SYS_ATA_REG_OFFSET=0x100
-CONFIG_SYS_ATA_ALT_OFFSET=0x100
-CONFIG_SYS_ATA_IDE0_OFFSET=0x4000
-CONFIG_LBA48=y
-CONFIG_SYS_I2C_LEGACY=y
-CONFIG_SPL_SYS_I2C_LEGACY=y
-CONFIG_SYS_I2C_MVTWSI=y
-CONFIG_SYS_I2C_SLAVE=0x0
-# CONFIG_MMC is not set
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SYS_MAX_FLASH_SECT=11
-CONFIG_MVGBE=y
-CONFIG_MII=y
-CONFIG_SYS_NS16550=y
-CONFIG_USB=y
diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h
deleted file mode 100644
index d2f1cd5d5c..0000000000
--- a/include/configs/edminiv2.h
+++ /dev/null
@@ -1,134 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net>
- *
- * Based on original Kirkwood support which is
- * (C) Copyright 2009
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
- */
-
-#ifndef _CONFIG_EDMINIV2_H
-#define _CONFIG_EDMINIV2_H
-
-/*
- * SPL
- */
-
-#define CONFIG_SYS_UBOOT_BASE		0xfff90000
-#define CONFIG_SYS_UBOOT_START		0x00800000
-
-/*
- * High Level Configuration Options (easy to change)
- */
-
-#include <asm/arch/orion5x.h>
-/*
- * CLKs configurations
- */
-
-/*
- * Board-specific values for Orion5x MPP low level init:
- * - MPPs 12 to 15 are SATA LEDs (mode 5)
- * - Others are GPIO/unused (mode 3 for MPP0, mode 5 for
- *   MPP16 to MPP19, mode 0 for others
- */
-
-#define ORION5X_MPP0_7		0x00000003
-#define ORION5X_MPP8_15		0x55550000
-#define ORION5X_MPP16_23	0x00005555
-
-/*
- * Board-specific values for Orion5x GPIO low level init:
- * - GPIO3 is input (RTC interrupt)
- * - GPIO16 is Power LED control (0 = on, 1 = off)
- * - GPIO17 is Power LED source select (0 = CPLD, 1 = GPIO16)
- * - GPIO18 is Power Button status (0 = Released, 1 = Pressed)
- * - GPIO19 is SATA disk power toggle (toggles on 0-to-1)
- * - GPIO22 is SATA disk power status ()
- * - GPIO23 is supply status for SATA disk ()
- * - GPIO24 is supply control for board (write 1 to power off)
- * Last GPIO is 25, further bits are supposed to be 0.
- * Enable mask has ones for INPUT, 0 for OUTPUT.
- * Default is LED ON, board ON :)
- */
-
-#define ORION5X_GPIO_OUT_ENABLE		0xfef4f0ca
-#define ORION5X_GPIO_OUT_VALUE		0x00000000
-#define ORION5X_GPIO_IN_POLARITY	0x000000d0
-
-/*
- * NS16550 Configuration
- */
-
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
-#define CONFIG_SYS_NS16550_CLK		CONFIG_SYS_TCLK
-#define CONFIG_SYS_NS16550_COM1		ORION5X_UART0_BASE
-
-/*
- * Serial Port configuration
- * The following definitions let you select what serial you want to use
- * for your console driver.
- */
-
-#define CONFIG_SYS_BAUDRATE_TABLE \
-	{ 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600 }
-
-/*
- * FLASH configuration
- */
-
-#define CONFIG_SYS_FLASH_BASE		0xfff80000
-
-/* auto boot */
-
-/*
- * Network
- */
-
-#ifdef CONFIG_CMD_NET
-#define CONFIG_MVGBE_PORTS	{1}		/* enable port 0 only */
-#define CONFIG_SKIP_LOCAL_MAC_RANDOMIZATION	/* don't randomize MAC */
-#define CONFIG_PHY_BASE_ADR	0x8
-#endif
-
-/*
- * IDE
- */
-#ifdef CONFIG_IDE
-#define __io
-/* Data, registers and alternate blocks are at the same offset */
-/* Each 8-bit ATA register is aligned to a 4-bytes address */
-/* A single bus, a single device */
-/* ATA registers base is at SATA controller base */
-/* ATA bus 0 is orion5x port 1 on ED Mini V2 */
-/* end of IDE defines */
-#endif /* CMD_IDE */
-
-/*
- * Common USB/EHCI configuration
- */
-#ifdef CONFIG_CMD_USB
-#define ORION5X_USB20_HOST_PORT_BASE ORION5X_USB20_PORT0_BASE
-#endif /* CONFIG_CMD_USB */
-
-/*
- * I2C related stuff
- */
-#ifdef CONFIG_CMD_I2C
-#define CONFIG_I2C_MVTWSI_BASE0		ORION5X_TWSI_BASE
-#endif
-
-/*
- *  Environment variables configurations
- */
-
-/* Enable command line editing */
-
-/* provide extensive help */
-
-/* additions for new relocation code, must be added to all boards */
-#define CONFIG_SYS_SDRAM_BASE		0
-
-#endif /* _CONFIG_EDMINIV2_H */