mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and MPC8360EMDS

This patch also adds an improved I2C set_speed(), which handles all clock
frequencies.

Signed-off-by: Timur Tabi <timur@freescale.com>

9 files changed, 154 insertions, 109 deletions

diff --git a/board/mpc8349emds/pci.c b/board/mpc8349emds/pci.c
index a916245aea..93827f11d8 100644
--- a/board/mpc8349emds/pci.c
+++ b/board/mpc8349emds/pci.c
@@ -75,10 +75,8 @@ pib_init(void)
 	/* Switch temporarily to I2C bus #2 */
 	orig_i2c_bus = i2c_get_bus_num();
 
-	if(orig_i2c_bus != I2C_BUS_2)
-	 	i2c_set_bus_num(I2C_BUS_2);
-
-	i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	if(orig_i2c_bus != 2)
+	 	i2c_set_bus_num(2);
 
 	val8 = 0;
 	i2c_write(0x23, 0x6, 1, &val8, 1);
@@ -124,7 +122,7 @@ pib_init(void)
 	printf("PCI2: 32-bit on PMC3\n");
 #endif
 	/* Reset to original I2C bus */
-	if(orig_i2c_bus != I2C_BUS_2)
+	if(orig_i2c_bus != 2)
 	 	i2c_set_bus_num(orig_i2c_bus);
 }
 
diff --git a/board/mpc8349itx/mpc8349itx.c b/board/mpc8349itx/mpc8349itx.c
index 9a5cbec858..4662645886 100644
--- a/board/mpc8349itx/mpc8349itx.c
+++ b/board/mpc8349itx/mpc8349itx.c
@@ -259,7 +259,7 @@ int checkboard(void)
 	puts("Board: Freescale MPC8349E-mITX");
 
 #ifdef CONFIG_HARD_I2C
-	i2c_set_bus_num(I2C_BUS_2);
+	i2c_set_bus_num(2);
 	if (i2c_read(CFG_I2C_8574A_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) ==
 	    0)
 		printf(" %u.%u (PCF8475A)", (i2c_data & 0x02) >> 1,
@@ -379,7 +379,7 @@ int misc_init_r(void)
 
 	u8 data[sizeof(eeprom_data)];
 
-	i2c_set_bus_num(I2C_BUS_1);
+	i2c_set_bus_num(1);
 
 	if (i2c_read(CFG_I2C_EEPROM_ADDR, 0, 2, data, sizeof(data)) == 0) {
 		if (memcmp(data, eeprom_data, sizeof(data)) != 0) {
@@ -397,7 +397,7 @@ int misc_init_r(void)
 #endif
 
 #ifdef CFG_I2C_RTC_ADDR
-	i2c_set_bus_num(I2C_BUS_2);
+	i2c_set_bus_num(2);
 
 	if (i2c_read(CFG_I2C_RTC_ADDR, 0, 1, ds1339_data, sizeof(ds1339_data))
 	    == 0) {
diff --git a/board/mpc8349itx/pci.c b/board/mpc8349itx/pci.c
index acac185d54..cf07020b62 100644
--- a/board/mpc8349itx/pci.c
+++ b/board/mpc8349itx/pci.c
@@ -105,7 +105,7 @@ void pci_init_board(void)
 	udelay(2000);
 
 #ifdef CONFIG_HARD_I2C
-	i2c_set_bus_num(I2C_BUS_2);
+	i2c_set_bus_num(2);
 	/* Read the PCI_M66EN jumper setting */
 	if ((i2c_read(CFG_I2C_8574_ADDR2, 0, 0, &reg8, sizeof(reg8)) == 0) ||
 	    (i2c_read(CFG_I2C_8574A_ADDR2, 0, 0, &reg8, sizeof(reg8)) == 0)) {
diff --git a/board/mpc8360emds/pci.c b/board/mpc8360emds/pci.c
index 880b2ecc3e..64ea50979d 100644
--- a/board/mpc8360emds/pci.c
+++ b/board/mpc8360emds/pci.c
@@ -198,8 +198,11 @@ void pci_init_board(void)
 	 * Assign PIB PMC slot to desired PCI bus
 	 */
 
-	mpc83xx_i2c = (i2c_t *) (CFG_IMMRBAR + CFG_I2C2_OFFSET);
-	i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	/* Switch temporarily to I2C bus #2 */
+	orig_i2c_bus = i2c_get_bus_num();
+
+	if(orig_i2c_bus != 2)
+	 	i2c_set_bus_num(2);
 
 	val8 = 0;
 	i2c_write(0x23, 0x6, 1, &val8, 1);
@@ -227,6 +230,10 @@ void pci_init_board(void)
 	i2c_write(0x27, 0x3, 1, &val8, 1);
 	asm("eieio");
 
+	/* Reset to original I2C bus */
+	if(orig_i2c_bus != 2)
+	 	i2c_set_bus_num(orig_i2c_bus);
+
 	/*
 	 * Release PCI RST Output signal
 	 */
diff --git a/cpu/mpc83xx/i2c.c b/cpu/mpc83xx/i2c.c
index fc89fb1e25..ce78491616 100644
--- a/cpu/mpc83xx/i2c.c
+++ b/cpu/mpc83xx/i2c.c
@@ -47,75 +47,121 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-/* Three I2C bus speeds are supported here (50kHz, 100kHz
- * and 400kHz).  It should be easy to add more.  Note that
- * the maximum bus speed for I2C bus 1 is CSB/3, while I2C
- * bus 2 can go as high as CSB.
- * Typical values for CSB are 266MHz and 200MHz.  */
-
-                                                                      /* 50kH  100kHz  400kHz */
-static const uchar speed_map_266[][3] =
-                                                                      {{0x2e,         0x2a,   0x20},  /* base 88MHz */
-                                                                       {0x34,         0x30,   0x28}}; /* base 266 MHz */
-
-static const uchar speed_map_200[][3] =
-                                                                      {{0x2c,         0x28,   0x20},  /* base 66 MHz */
-                                                                       {0x33,         0x2f,   0x26}}; /* base 200 MHz */
-
 /* Initialize the bus pointer to whatever one the SPD EEPROM is on.
  * Default is bus 1.  This is necessary because the DDR initialization
  * runs from ROM, and we can't switch buses because we can't modify
  * the i2c_dev variable.  Everything gets straightened out once i2c_init
  * is called from RAM.  */
 
-#if defined CFG_SPD_BUS_NUM
-static i2c_t *i2c_dev = CFG_SPD_BUS_NUM;
+#ifndef CFG_SPD_BUS_NUM
+#define CFG_SPD_BUS_NUM 1
+#endif
+
+static unsigned int i2c_bus_num = CFG_SPD_BUS_NUM;
+
+#if CFG_SPD_BUS_NUM == 1
+static volatile i2c_t *i2c_dev = I2C_1;
 #else
-static i2c_t *i2c_dev = I2C_1;
+static volatile i2c_t *i2c_dev = I2C_2;
 #endif
 
-static uchar busNum = I2C_BUS_1 ;
-static int bus_speed[2] = {0, 0};
+static int i2c_bus_speed[2] = {0, 0};
 
-static int set_speed(int speed)
+/*
+ * Map the frequency divider to the FDR.  This data is taken from table 17-5
+ * of the MPC8349EA reference manual, with duplicates removed.
+ */
+static struct {
+    unsigned int divider;
+    u8 fdr;
+} i2c_speed_map[] =
 {
-      uchar value;
-      const uchar *spdPtr;
-
-      /* Global data contains maximum I2C bus 1 speed, which is CSB/3 */
-      if(gd->i2c_clk == 88000000)
-      {
-              spdPtr = speed_map_266[busNum];
-      }
-      else if(gd->i2c_clk == 66000000)
-      {
-              spdPtr = speed_map_200[busNum];
-      }
-      else
-      {
-              printf("Max I2C bus speed %d not supported\n", gd->i2c_clk);
-              return -1;
-      }
-
-      switch(speed)
-      {
-              case 50000:
-                      value   = *(spdPtr + 0);
-                      break;
-              case 100000:
-                      value   = *(spdPtr + 1);
-                      break;
-              case 400000:
-                      value   = *(spdPtr + 2);
-                      break;
-              default:
-                      printf("I2C bus speed %d not supported\n", speed);
-                      return -2;
-      }
-      /* set clock */
-      writeb(value, &i2c_dev->fdr);
-      bus_speed[busNum] = speed;
-      return 0;
+	{0, 0x20},
+	{256, 0x20},
+	{288, 0x21},
+	{320, 0x22},
+	{352, 0x23},
+	{384, 0x24},
+	{416, 0x01},
+	{448, 0x25},
+	{480, 0x02},
+	{512, 0x26},
+	{576, 0x27},
+	{640, 0x28},
+	{704, 0x05},
+	{768, 0x29},
+	{832, 0x06},
+	{896, 0x2A},
+	{1024, 0x2B},
+	{1152, 0x08},
+	{1280, 0x2C},
+	{1536, 0x2D},
+	{1792, 0x2E},
+	{1920, 0x0B},
+	{2048, 0x2F},
+	{2304, 0x0C},
+	{2560, 0x30},
+	{3072, 0x31},
+	{3584, 0x32},
+	{3840, 0x0F},
+	{4096, 0x33},
+	{4608, 0x10},
+	{5120, 0x34},
+	{6144, 0x35},
+	{7168, 0x36},
+	{7680, 0x13},
+	{8192, 0x37},
+	{9216, 0x14},
+	{10240, 0x38},
+	{12288, 0x39},
+	{14336, 0x3A},
+	{15360, 0x17},
+	{16384, 0x3B},
+	{18432, 0x18},
+	{20480, 0x3C},
+	{24576, 0x3D},
+	{28672, 0x3E},
+	{30720, 0x1B},
+	{32768, 0x3F},
+	{36864, 0x1C},
+	{40960, 0x1D},
+	{49152, 0x1E},
+	{61440, 0x1F},
+	{-1, 0x1F}
+};
+
+#define NUM_I2C_SPEEDS (sizeof(i2c_speed_map) / sizeof(i2c_speed_map[0]))
+
+static int set_speed(unsigned int speed)
+{
+	unsigned long i2c_clk;
+	unsigned int divider, i;
+	u8 fdr = 0x3F;
+
+	i2c_clk = (i2c_bus_num == 2) ? gd->i2c2_clk : gd->i2c1_clk;
+
+	divider = i2c_clk / speed;
+
+	/* Scan i2c_speed_map[] for the closest matching divider.*/
+
+	for (i = 0; i < NUM_I2C_SPEEDS-1; i++) {
+		/* Locate our divider in between two entries in i2c_speed_map[] */
+		if ((divider >= i2c_speed_map[i].divider) &&
+		    (divider <= i2c_speed_map[i+1].divider)) {
+			/* Which one is closer? */
+			if ((divider - i2c_speed_map[i].divider) < (i2c_speed_map[i+1].divider - divider)) {
+				fdr = i2c_speed_map[i].fdr;
+			} else {
+				fdr = i2c_speed_map[i+1].fdr;
+			}
+			break;
+		}
+	}
+
+	writeb(fdr, &i2c_dev->fdr);
+	i2c_bus_speed[i2c_bus_num - 1] = speed;
+
+	return 0;
 }
 
 
@@ -125,16 +171,16 @@ static void _i2c_init(int speed, int slaveadd)
 	writeb(0x00 , &i2c_dev->cr);
 
 	/* set clock */
-	writeb(speed, &i2c_dev->fdr);
+	set_speed(speed);
 
 	/* set default filter */
-	writeb(0x10,&i2c_dev->dfsrr);
+	writeb(IC2_FDR,&i2c_dev->dfsrr);
 
 	/* write slave address */
 	writeb(slaveadd, &i2c_dev->adr);
 
 	/* clear status register */
-	writeb(0x00, &i2c_dev->sr);
+	writeb(I2C_CR_MTX, &i2c_dev->sr);
 
 	/* start I2C controller */
 	writeb(I2C_CR_MEN, &i2c_dev->cr);
@@ -142,19 +188,19 @@ static void _i2c_init(int speed, int slaveadd)
 
 void i2c_init(int speed, int slaveadd)
 {
-      /* Set both interfaces to the same speed and slave address */
-      /* Note: This function gets called twice - before and after
-       * relocation to RAM.  The first time it's called, we are unable
-       * to change buses, so whichever one 'i2c_dev' was initialized to
-       * gets set twice.  When run from RAM both buses get set properly */
-
-      i2c_set_bus_num(I2C_BUS_1);
-      _i2c_init(speed, slaveadd);
-#ifdef        CFG_I2C2_OFFSET
-      i2c_set_bus_num(I2C_BUS_2);
-      _i2c_init(speed, slaveadd);
-      i2c_set_bus_num(I2C_BUS_1);
-#endif        /* CFG_I2C2_OFFSET */
+	/* Set both interfaces to the same speed and slave address */
+	/* Note: This function gets called twice - before and after
+	 * relocation to RAM.  The first time it's called, we are unable
+	 * to change buses, so whichever one 'i2c_dev' was initialized to
+	 * gets set twice.  When run from RAM both buses get set properly */
+
+	i2c_set_bus_num(1);
+	_i2c_init(speed, slaveadd);
+#ifdef	CFG_I2C2_OFFSET
+	i2c_set_bus_num(2);
+	_i2c_init(speed, slaveadd);
+	i2c_set_bus_num(1);
+#endif	/* CFG_I2C2_OFFSET */
 }
 
 static __inline__ int
@@ -340,38 +386,38 @@ void i2c_reg_write (uchar i2c_addr, uchar reg, uchar val)
 	i2c_write (i2c_addr, reg, 1, &val, 1);
 }
 
-int 	i2c_set_bus_num(uchar bus)
+int i2c_set_bus_num(unsigned int bus)
 {
-	if(bus == I2C_BUS_1)
+	if(bus == 1)
 	{
 		i2c_dev = I2C_1;
 	}
 #ifdef	CFG_I2C2_OFFSET
-	else if(bus == I2C_BUS_2)
+	else if(bus == 2)
 	{
 		i2c_dev = I2C_2;
 	}
-#endif	/* CFG_I2C2_OFFSET */
+#endif
 	else
 	{
 		return -1;
 	}
-	busNum = bus;
+	i2c_bus_num = bus;
 	return 0;
 }
 
-int 	i2c_set_bus_speed(int speed)
+int i2c_set_bus_speed(unsigned int speed)
 {
 	return set_speed(speed);
 }
 
-uchar i2c_get_bus_num(void)
+unsigned int i2c_get_bus_num(void)
 {
-	return busNum;
+	return i2c_bus_num;
 }
 
-int 	i2c_get_bus_speed(void)
+unsigned int i2c_get_bus_speed(void)
 {
-	return bus_speed[busNum];
+	return i2c_bus_speed[i2c_bus_num - 1];
 }
 #endif /* CONFIG_HARD_I2C */
diff --git a/include/asm-ppc/i2c.h b/include/asm-ppc/i2c.h
index baf9d9a262..8afdda2ce2 100644
--- a/include/asm-ppc/i2c.h
+++ b/include/asm-ppc/i2c.h
@@ -79,12 +79,6 @@ typedef struct i2c
 #endif
 #define I2C_TIMEOUT (CFG_HZ/4)
 
-enum	I2C_BUS_NUM
-{
-	I2C_BUS_1 = 0,
-	I2C_BUS_2,
-};
-
 #ifndef CFG_IMMRBAR
 #error CFG_IMMRBAR is not defined in /include/configs/${BOARD}.h
 #endif
@@ -96,9 +90,9 @@ enum	I2C_BUS_NUM
 #define I2C_1 ((i2c_t*)(CFG_IMMRBAR + CFG_I2C_OFFSET))
 
 /* Optional support for second I2C bus */
-#ifdef        CFG_I2C2_OFFSET
+#ifdef	CFG_I2C2_OFFSET
 #define I2C_2 ((i2c_t*)(CFG_IMMRBAR + CFG_I2C2_OFFSET))
-#endif        /* CFG_I2C2_OFFSET */
+#endif	/* CFG_I2C2_OFFSET */
 
 #define I2C_READ  1
 #define I2C_WRITE 0
diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
index 20f3c6d399..2fbc736182 100644
--- a/include/configs/MPC8349ITX.h
+++ b/include/configs/MPC8349ITX.h
@@ -81,7 +81,7 @@
 #define CONFIG_I2C_CMD_TREE
 #define CFG_I2C_OFFSET      	0x3000
 #define CFG_I2C2_OFFSET      	0x3100
-#define CFG_SPD_BUS_NUM		I2C_2
+#define CFG_SPD_BUS_NUM		2
 
 #define CFG_I2C_8574_ADDR1	0x20	/* I2C2, PCF8574 */
 #define CFG_I2C_8574_ADDR2	0x21	/* I2C2, PCF8574 */
diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h
index f0e49007d0..727094b203 100644
--- a/include/configs/TQM834x.h
+++ b/include/configs/TQM834x.h
@@ -36,8 +36,8 @@
  */
 #define CONFIG_E300		1	/* E300 Family */
 #define CONFIG_MPC83XX		1	/* MPC83XX family */
-#define CONFIG_MPC8349		1	/* MPC8349 specific */
 #define CONFIG_MPC834X		1	/* MPC834X specific */
+#define CONFIG_MPC8349		1	/* MPC8349 specific */
 #define CONFIG_TQM834X		1	/* TQM834X board specific */
 
 /* IMMR Base Addres Register, use Freescale default: 0xff400000 */
diff --git a/include/i2c.h b/include/i2c.h
index 97e006163a..a8f729afe0 100644
--- a/include/i2c.h
+++ b/include/i2c.h
@@ -97,7 +97,7 @@ void  i2c_reg_write(uchar chip, uchar reg, uchar val);
  * 	Returns: 0 on success, not 0 on failure
  *
  */
-int		i2c_set_bus_num(uchar bus);
+int i2c_set_bus_num(unsigned int bus);
 
 /*
  * i2c_get_bus_num:
@@ -105,7 +105,7 @@ int		i2c_set_bus_num(uchar bus);
  *  Returns index of currently active I2C bus.  Zero-based.
  */
 
-uchar	i2c_get_bus_num(void);
+unsigned int i2c_get_bus_num(void);
 
 /*
  * i2c_set_bus_speed:
@@ -117,7 +117,7 @@ uchar	i2c_get_bus_num(void);
  * 	Returns: 0 on success, not 0 on failure
  *
  */
-int		i2c_set_bus_speed(int);
+int i2c_set_bus_speed(unsigned int);
 
 /*
  * i2c_get_bus_speed:
@@ -125,6 +125,6 @@ int		i2c_set_bus_speed(int);
  *  Returns speed of currently active I2C bus in Hz
  */
 
-int		i2c_get_bus_speed(void);
+unsigned int i2c_get_bus_speed(void);
 
 #endif	/* _I2C_H_ */