summaryrefslogtreecommitdiff
path: root/drivers/ide/ide-lib.c
AgeCommit message (Collapse)AuthorFilesLines
2011-10-31ide/ata: Add export.h for EXPORT_SYMBOL/THIS_MODULE where neededPaul Gortmaker1-0/+1
They were getting this implicitly by an include of module.h from device.h -- but we are going to clean that up and break that include chain, so include export.h explicitly now. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2009-05-22Merge branch 'master' into for-2.6.31Jens Axboe1-21/+6
Conflicts: drivers/ide/ide-io.c Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-22ide: improve failed opcode reportingBartlomiej Zolnierkiewicz1-19/+4
Nowadays we (almost) always store the currently executing command in hwif->cmd so we can use it for the failed opcode reporting. Cc: Martin Lottermoser <Martin.Lottermoser@t-online.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-22ide: fix printk() levels in ide_dump_ata[pi]_error()Bartlomiej Zolnierkiewicz1-2/+2
Fixes "<3>" in error messages like this one: hdc: cdrom_decode_status: error=0x40 <3>{ LastFailedSense=0x04 } Reported-by: Martin Lottermoser <Martin.Lottermoser@t-online.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-11ide: convert to rq pos and nr_sectors accessorsTejun Heo1-1/+1
ide doesn't manipulate request fields anymore and thus all hard and their soft equivalents are always equal. Convert all references to accessors. [ Impact: use pos and nr_sectors accessors ] Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-08ide: refactor tf_read() methodSergei Shtylyov1-1/+1
Simplify tf_read() method, making it deal only with 'struct ide_taskfile' and the validity flags that the upper layer passes, and factoring out the code that deals with the high order bytes into ide_tf_readback() to be called from the only two functions interested, ide_complete_cmd() and ide_dump_sector(). This should stop the needless code duplication in this method and so make it about twice smaller than it was; along with simplifying the setup for the method call, this should save both time and space... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08ide: simplify 'struct ide_taskfile'Sergei Shtylyov1-7/+8
Make 'struct ide_taskfile' cover only 8 register values and thus put two such fields ('tf' and 'hob') into 'struct ide_cmd', dropping unnecessary 'tf_array' field from it. This required changing the prototype of ide_get_lba_addr() and ide_tf_dump(). Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> [bart: fix setting of ATA_LBA bit for LBA48 commands in __ide_do_rw_disk()] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08ide: replace IDE_TFLAG_* flags by IDE_VALID_*Sergei Shtylyov1-5/+6
Replace IDE_TFLAG_{IN|OUT}_* flags meaning to the taskfile register validity on input/output by the IDE_VALID_* flags and introduce 4 symmetric 8-bit register validity indicator subfields, 'valid.{input/output}.{tf|hob}', into the 'struct ide_cmd' instead of using the 'tf_flags' field for that purpose (this field can then be turned from 32-bit into 8-bit one). Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-27ide: remove ide_task_t typedefBartlomiej Zolnierkiewicz1-10/+10
While at it: - rename struct ide_task_s to struct ide_cmd - remove stale comments from idedisk_{read_native,set}_max_address() - drop unused 'cmd' argument from ide_{cmd,task}_ioctl() - drop unused 'task' argument from tx4939ide_tf_load_fixup() - rename ide_complete_task() to ide_complete_cmd() - use consistent naming for struct ide_cmd variables There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide: move xfer mode tuning code to ide-xfer-mode.cBartlomiej Zolnierkiewicz1-240/+0
* Move xfer mode tuning code to ide-xfer-mode.c. * Add CONFIG_IDE_XFER_MODE config option to be selected by host drivers that support xfer mode tuning. * Add CONFIG_IDE_XFER_MODE=n static inline versions of ide_set_pio() and ide_set_xfer_rate(). * Make IDE_TIMINGS and BLK_DEV_IDEDMA config options select IDE_XFER_MODE, also add explicit selects for few host drivers that need it. * Build/link ide-xfer-mode.o and ide-pio-blacklist.o (it is needed only by ide-xfer-mode.o) only if CONFIG_IDE_XFER_MODE=y. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: merge ide_hwgroup_t with ide_hwif_t (v2)Bartlomiej Zolnierkiewicz1-3/+6
* Merge ide_hwgroup_t with ide_hwif_t. * Cleanup init_irq() accordingly, then remove no longer needed ide_remove_port_from_hwgroup() and ide_ports[]. * Remove now unused HWGROUP() macro. While at it: * ide_dump_ata_error() fixups v2: * Fix ->quirk_list check in do_ide_request() (s/hwif->cur_dev/prev_port->cur_dev). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-29ide: remove superfluous local_irq_{save,restore}() from ide_dump_status()Bartlomiej Zolnierkiewicz1-3/+0
No reason to run this function with local IRQs off. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-29ide: checkpatch.pl fixes for ide-lib.cBartlomiej Zolnierkiewicz1-41/+54
Fix following errors/warnings detected by checkpatch.pl: - WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable - WARNING: space prohibited between function name and open parenthesis '(' - ERROR: trailing whitespace - ERROR: trailing statements should be on next line - WARNING: printk() should include KERN_ facility level Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-29ide: ide_hwgroup_t.rq doesn't need an ide_lock heldBartlomiej Zolnierkiewicz1-6/+1
While at it: - no need to check for hwgroup presence in ide_dump_opcode() Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: add device flagsBartlomiej Zolnierkiewicz1-1/+1
Add 'unsigned long dev_flags' to ide_drive_t and convert bitfields to IDE_DFLAG_* flags. While at it: - IDE_DFLAG_ADDRESSING -> IDE_DFLAG_LBA48 - fixup some comments - remove needless g->flags zeroing from ide*_probe() There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10ide: include <linux/hdreg.h> only when neededBartlomiej Zolnierkiewicz1-1/+0
* Include <linux/ata.h> directly in <linux/ide.h> instead of through <linux/hdreg.h>. * Include <linux/hdreg.h> only when needed. Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10ide: use ATA_* defines instead of *_STAT and *_ERR onesBartlomiej Zolnierkiewicz1-24/+24
* ERR_STAT -> ATA_ERR * INDEX_STAT -> ATA_IDX * ECC_STAT -> ATA_CORR * DRQ_STAT -> ATA_DRQ * SEEK_STAT -> ATA_DSC * WRERR_STAT -> ATA_DF * READY_STAT -> ATA_DRDY * BUSY_STAT -> ATA_BUSY * MARK_ERR -> ATA_AMNF * TRK0_ERR -> ATA_TRK0NF * ABRT_ERR -> ATA_ABORTED * MCR_ERR -> ATA_MCR * ID_ERR -> ATA_IDNF * MC_ERR -> ATA_MC * ECC_ERR -> ATA_UNC * ICRC_ERR -> ATA_ICRC * BBD_ERR -> ATA_BBK Also: * ILI_ERR -> ATAPI_ILI * EOM_ERR -> ATAPI_EOM * LFS_ERR -> ATAPI_LFS * CD -> ATAPI_COD * IO -> ATAPI_IO Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10ide: remove drive->driveidBartlomiej Zolnierkiewicz1-2/+2
* Factor out HDIO_[OBSOLETE,GET]_IDENTITY ioctls handling to ide_get_identity_ioctl(). * Use temporary buffer in ide_get_identity_ioctl() instead of accessing drive->id directly. * Add ide_id_to_hd_driveid() inline to convert raw id into struct hd_driveid format (needed on big-endian). * Use ide_id_to_hd_driveid() in ide_get_identity_ioctl(), cleanup ide_fix_driveid() and switch ide to use use raw id. * Remove no longer needed drive->driveid. This leaves us with 3 users of struct hd_driveid in tree: - arch/um/drivers/ubd_kern.c - drivers/block/xsysace.c - drivers/usb/storage/isd200.c While at it: * Use ata_id_u{32,64}() and ata_id_has_{dma,lba,iordy}() macros. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10ide: make drive->id an union (take 2)Bartlomiej Zolnierkiewicz1-11/+13
Make drive->id an unnamed union so id can be accessed either by using 'u16 *id' or 'struct hd_driveid *driveid'. Then convert all existing drive->id users accordingly (using 'u16 *id' when possible). This is an intermediate step to make ide 'struct hd_driveid'-free. While at it: - Add missing KERN_CONTs in it821x.c. - Use ATA_ID_WORDS and ATA_ID_*_LEN defines. - Remove unnecessary checks for drive->id. - s/drive_table/table/ in ide_in_drive_list(). - Cleanup ide_config_drive_speed() a bit. - s/drive1/dev1/ & s/drive0/dev0/ in ide_undecoded_slave(). v2: Fix typo in drivers/ide/ppc/pmac.c. (From Stephen Rothwell) There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: add struct ide_tp_ops (take 2)Bartlomiej Zolnierkiewicz1-1/+1
* Add struct ide_tp_ops for transport methods. * Add 'const struct ide_tp_ops *tp_ops' to struct ide_port_info and ide_hwif_t. * Set the default hwif->tp_ops in ide_init_port_data(). * Set host driver specific hwif->tp_ops in ide_init_port(). * Export ide_exec_command(), ide_read_status(), ide_read_altstatus(), ide_read_sff_dma_status(), ide_set_irq(), ide_tf_{load,read}() and ata_{in,out}put_data(). * Convert host drivers and core code to use struct ide_tp_ops. * Remove no longer needed default_hwif_transport(). * Cleanup ide_hwif_t from methods that are now in struct ide_tp_ops. While at it: * Use struct ide_port_info in falconide.c and q40ide.c. * Rename ata_{in,out}put_data() to ide_{in,out}put_data(). v2: * Fix missing convertion in ns87415.c. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: filter out "default" transfer mode values in set_xfer_rate()Bartlomiej Zolnierkiewicz1-13/+2
* Filter out "default" transfer mode values (0x00 - default PIO mode, 0x01 - default PIO mode w/ IORDY disabled) in write handler for obsoleted /proc/ide/hd?/settings:current_speed setting. Allowing "default" transfer mode values is a dangerous thing to do as we don't support programming controller to the "default" transfer mode and devices often use different values for the default and maximum PIO mode (i.e. PIO2 default and PIO4 maximum) so the controller will stay programmed for higher PIO mode while device will use the lower PIO mode. There is no functionality loss as by using special IOCTLs device can still be programmed to "default" transfer modes (it is only useful for debugging/testing purposes anyway). * Remove no longer needed IDE_HFLAG_ABUSE_SET_DMA_MODE host flag, it was previously used by few host drivers to program the controller to PIO0 timings for "default" transfer mode == 0x01 (although some host drivers would program invalid PIO timings instead). * Cleanup ide_set_xfer_rate() and add BUG_ON(). Suggested-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-16ide: move PIO blacklist to ide-pio-blacklist.cBartlomiej Zolnierkiewicz1-96/+0
Move PIO blacklist to ide-pio-blacklist.c. While at it: - fix comment - fix whitespace damage There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-16ide: remove no longer used ide_pio_timings[]Bartlomiej Zolnierkiewicz1-17/+0
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-16ide: move ide_pio_cycle_time() to ide-timings.cBartlomiej Zolnierkiewicz1-23/+0
All ide_pio_cycle_time() users already select CONFIG_IDE_TIMINGS so move the function from ide-lib.c to ide-timings.c. While at it: - convert ide_pio_cycle_time() to use ide_timing_find_mode() - cleanup ide_pio_cycle_time() a bit There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-16ide: remove needless includes from ide-lib.cBartlomiej Zolnierkiewicz1-15/+0
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide: add ->tf_load and ->tf_read methodsBartlomiej Zolnierkiewicz1-1/+1
* Add ->tf_load and ->tf_read methods to ide_hwif_t and set the default methods in default_hwif_transport(). * Use ->tf_{load,read} instead o calling ide_tf_{load,read}() directly. * Make ide_tf_{load,read}() static. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-26ide: replace remaining __FUNCTION__ occurrencesHarvey Harrison1-1/+1
__FUNCTION__ is gcc-specific, use __func__ [bart: fix checkpatch.pl errors in ide-lib.c and ppc/mpc8xx.c while at it] Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-26ide: add struct ide_port_ops (take 2)Bartlomiej Zolnierkiewicz1-10/+14
* Move hooks for port/host specific methods from ide_hwif_t to 'struct ide_port_ops'. * Add 'const struct ide_port_ops *port_ops' to 'struct ide_port_info' and ide_hwif_t. * Update host drivers and core code accordingly. While at it: * Rename ata66_*() cable detect functions to *_cable_detect() to match the standard naming. (Suggested by Sergei Shtylyov) v2: * Fix build for bast-ide. (Noticed by Andrew Morton) Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-26ide: sanitize handling of IDE_HFLAG_NO_SET_MODE host flagBartlomiej Zolnierkiewicz1-2/+10
* Check for IDE_HFLAG_NO_SET_MODE host flag in ide_set_pio(), ide_set_[pio,dma]_mode(), ide_set_xfer_rate() and set_pio_mode(). * Remove no longer needed IDE_HFLAG_NO_SET_MODE host flag checking from ide_tune_dma(). * Remove superfluous ->set_pio_mode checking from do_special(). This is a part of preparations for adding 'struct ide_port_ops'. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-26ide: remove PIO "downgrade" quirkBartlomiej Zolnierkiewicz1-10/+0
No need for it nowadays so remove quirk code from ide_get_best_pio_mode() and IDE_HFLAG_PIO_DOWNGRADE host flag. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-03-22ide: remove commented out entries from ide_pio_blacklist[]Bartlomiej Zolnierkiewicz1-10/+0
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-11ide: remove stale comment from ide-lib.cBartlomiej Zolnierkiewicz1-9/+0
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-06ide: add ide_read_error() inline helperBartlomiej Zolnierkiewicz1-1/+1
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: keep pointer to struct device instead of struct pci_dev in ide_hwif_tBartlomiej Zolnierkiewicz1-2/+4
Keep pointer to struct device instead of struct pci_dev in ide_hwif_t. While on it: * Use *dev->dma_mask instead of pci_dev->dma_mask in ide_toggle_bounce(). There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: remove REQ_TYPE_ATA_CMDBartlomiej Zolnierkiewicz1-18/+7
Based on the earlier work by Tejun Heo. All users are gone so we can finally remove it. Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: add IDE_HFLAG_ABUSE_SET_DMA_MODE host flagBartlomiej Zolnierkiewicz1-0/+6
* Add IDE_HFLAG_ABUSE_SET_DMA_MODE host flag and use it to decide what to do with transfer modes < XFER_PIO_0 in ide_set_xfer_rate(). * Set IDE_HFLAG_ABUSE_SET_DMA_MODE in host drivers that need it (aec62xx, amd74xx, cs5520, cs5535, hpt34x, hpt366, pdc202xx_old, serverworks, tc86c001 and via82cxxx) and cleanup ->set_dma_mode methods in host drivers that don't (IDE core code guarantees that ->set_dma_mode will be called only for modes which are present in SWDMA/MWDMA/UDMA masks). While at it: * Add IDE_HFLAGS_HPT34X/HPT3XX/PDC202XX/SVWKS define in hpt34x/hpt366/pdc202xx_old/serverworks host driver. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: kill duplicate code in ide_dump_{ata,atapi}_status()Bartlomiej Zolnierkiewicz1-68/+37
* Move the common code from ide_dump_{ata,atapi}_status() to ide_dump_status(). * ide_dump_{ata,atapi}_status() -> ide_dump_{ata,atapi}_error(). There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide-disk: use ide_get_lba_addr()Bartlomiej Zolnierkiewicz1-1/+2
* Export ide_get_lba_addr(). * Convert idedisk_{read_native,set}_max_address() to use ide_get_lba_addr(). * Remove incorrect comment from idedisk_read_native_max_address() (noticed by Sergei). There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: printk fixAndrew Morton1-1/+2
power4: drivers/ide/ide-lib.c: In function `ide_dump_sector': drivers/ide/ide-lib.c:516: warning: long long unsigned int format, u64 arg (arg 2) We don't know what type is used to implement u64 hence it must always be cast when printed. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: add ide_tf_read() helperBartlomiej Zolnierkiewicz1-32/+37
* Factor out code reading taskfile registers from ide_end_drive_cmd() to the new ide_tf_read() helper. * Add IDE_TFLAG_IN_* taskfile flags to indicate the need to load particular IDE taskfile register in ide_tf_read(). * Update ide_end_drive_cmd() to set respective IDE_TFLAG_IN_* taksfile flags. * Add ide_get_lba_addr() for getting LBA sector address from taskfile struct. * Factor out code getting sector address from ide_dump_ata_status() to the new ide_dump_sector() function. * Convert ide_dump_sector() to use ide_tf_read() and ide_get_lba_addr(). * Remove no longer needed ide_read_24(). The only change in functionality caused by this patch is that ide_dump_ata_status() no longer prints "high"/"low" parts of LBA48 sector address (of course LBA48 sector address is still printed). Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: fix registers loading order in ide_dump_ata_status()Bartlomiej Zolnierkiewicz1-9/+14
Fix registers loading order in ide_dump_ata_status()/ide_read_24(). Load registers in this order: * IDE_SECTOR_REG * IDE_LCYL_REG * IDE_HCYL_REG * IDE_SELECT_REG It shouldn't affect anything (just a usual paranoia to separate changes which change the way in which hardware is accessed from code cleanups). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: remove atapi_error_t (take 2)Bartlomiej Zolnierkiewicz1-11/+10
Remove atapi_error_t. While at it: * replace 'HWIF(drive)' by 'drive->hwif' v2: * Add {ILI,EOM,LFS}_ERR defines to <linux/hdreg.h>. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: remove ata_status_t and atapi_status_tBartlomiej Zolnierkiewicz1-12/+9
Remove ata_status_t (unused) and atapi_status_t. While at it: * replace 'HWIF(drive)' by 'drive->hwif' (or just 'hwif' where possible) Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: remove REQ_TYPE_ATA_TASKBartlomiej Zolnierkiewicz1-2/+1
Based on the earlier work by Tejun Heo. All users are gone so we can finally remove it. Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: add struct ide_taskfile (take 2)Bartlomiej Zolnierkiewicz1-2/+1
* Don't set write-only ide_task_t.hobRegister[6] and ide_task_t.hobRegister[7] in idedisk_set_max_address_ext(). * Add struct ide_taskfile and use it in ide_task_t instead of tfRegister[] and hobRegister[]. * Remove no longer needed IDE_CONTROL_OFFSET_HOB define. * Add #ifndef/#endif __KERNEL__ around definitions of {task,hob}_struct_t. While at it: * Use ATA_LBA define for LBA bit (0x40) as suggested by Tejun Heo. v2: * Add missing newlines. (Noticed by Sergei) * Use ~ATA_LBA instead of 0xBF. (Noticed by Sergei) * Use unnamed unions for error/feature and status/command. (Suggested by Sergei). There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-12-12ide: DMA reporting and validity checking fixes (take 3)Bartlomiej Zolnierkiewicz1-26/+29
* ide_xfer_verbose() fixups: - beautify returned mode names - fix PIO5 reporting - make it return 'const char *' * Change printk() level from KERN_DEBUG to KERN_INFO in ide_find_dma_mode(). * Add ide_id_dma_bug() helper based on ide_dma_verbose() to check for invalid DMA info in identify block. * Use ide_id_dma_bug() in ide_tune_dma() and ide_driveid_update(). As a result DMA won't be tuned or will be disabled after tuning if device reports inconsistent info about enabled DMA mode (ide_dma_verbose() does the same checks while the IDE device is probed by ide-{cd,disk} device driver). * Remove no longer needed ide_dma_verbose(). This patch should fix the following problem with out-of-sync IDE messages reported by Nick Warne: hdd: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache<7>hdd: skipping word 93 validity check , UDMA(66) and later debugged by Mark Lord to be caused by: ide_dma_verbose() printk( ... "2048kB Cache"); eighty_ninty_three() printk(KERN_DEBUG "%s: skipping word 93 validity check\n"); ide_dma_verbose() printk(", UDMA(66)" Please note that as a result ide-{cd,disk} device drivers won't report the DMA speed used but this is intended since now DMA mode being used is always reported by IDE core code. v2: * fixes suggested by Randy: - use KERN_CONT for printk()-s in ide-{cd,disk}.c - don't remove argument name from ide_xfer_verbose() declaration v3: * Remove incorrect check for (id->field_valid & 1) from ide_id_dma_bug() (spotted by Sergei). * "XFER SLOW" -> "PIO SLOW" in ide_xfer_verbose() (suggested by Sergei). * Fix ide_find_dma_mode() to report the correct mode ('mode' after being limited by 'req_mode'). Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Nick Warne <nick@ukfsn.org> Cc: Mark Lord <lkml@rtr.ca> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-11-13ide: add missing HOB bit clearing to ide_dump_ata_status()Bartlomiej Zolnierkiewicz1-0/+1
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-16ide: remove ide_use_fast_pio()Bartlomiej Zolnierkiewicz1-15/+0
Remove ide_use_fast_pio() and just re-tune PIO unconditionally if DMA tuning has failed in ->ide_dma_check. All host drivers using ide_use_fast_pio() set drive->autotune so PIO is always tuned anyway and in some cases we _really_ need to re-tune PIO because PIO and DMA timings are shared. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-13ide: move ide_config_drive_speed() calls to upper layers (take 2)Bartlomiej Zolnierkiewicz1-17/+61
* Convert {ide_hwif_t,ide_pci_device_t}->host_flag to be u16. * Add IDE_HFLAG_POST_SET_MODE host flag to indicate the need to program the host for the transfer mode after programming the device. Set it in au1xxx-ide, amd74xx, cs5530, cs5535, pdc202xx_new, sc1200, pmac and via82cxxx host drivers. * Add IDE_HFLAG_NO_SET_MODE host flag to indicate the need to completely skip programming of host/device for the transfer mode ("smart" hosts). Set it in it821x host driver and check it in ide_tune_dma(). * Add ide_set_pio_mode()/ide_set_dma_mode() helpers and convert all direct ->set_pio_mode/->speedproc users to use these helpers. * Move ide_config_drive_speed() calls from ->set_pio_mode/->speedproc methods to callers. * Rename ->speedproc method to ->set_dma_mode, make it void and update all implementations accordingly. * Update ide_set_xfer_rate() comments. * Unexport ide_config_drive_speed(). v2: * Fix issues noticed by Sergei: - export ide_set_dma_mode() instead of moving ->set_pio_mode abuse wrt to setting DMA modes from sc1200_set_pio_mode() to do_special() - check IDE_HFLAG_NO_SET_MODE in ide_tune_dma() - check for (hwif->set_pio_mode) == NULL in ide_set_pio_mode() - check for (hwif->set_dma_mode) == NULL in ide_set_dma_mode() - return -1 from ide_set_{pio,dma}_mode() if ->set_{pio,dma}_mode == NULL - don't set ->set_{pio,dma}_mode on it821x in "smart" mode - fix build problem in pmac.c - minor fixes in au1xxx-ide.c/cs5530.c/siimage.c - improve patch description Changes in behavior caused by this patch: - HDIO_SET_PIO_MODE ioctl would now return -ENOSYS for attempts to change PIO mode if it821x controller is in "smart" mode - removal of two debugging printk-s (from cs5530.c and sc1200.c) - transfer modes 0x00-0x07 passed from user space may be programmed twice on the device (not really an issue since 0x00 is not supported correctly by any host driver ATM, 0x01 is not supported at all and 0x02-0x07 are invalid) Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-11ide: use only ->set_pio_mode method for programming PIO modes (take 2)Bartlomiej Zolnierkiewicz1-0/+12
Use ->set_pio_mode method to program PIO modes in ide_set_xfer_rate() (the only place which used ->speedproc to program PIO modes) and remove handling of PIO modes from all ->speedproc implementations. v2: * Fix pmac_ide_tune_chipset() comment. There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 17:41:15 +0000