summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2012-04-13mac80211: fix an issue in ieee80211_tx_info count field managementLorenzo Bianconi1-1/+7
I noticed a possible issue in the status count field management of the ieee80211_tx_info data structure. In particular, when the AGGR processing is employed, status.rates[].count is set just for the first frame and not for others belonging to the same burst, leading to wrong statistic data in the mac80211 debug file system. Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-13cfg80211: Add channel information to NL80211_CMD_GET_INTERFACEPontus Fuchs4-3/+20
If the current channel is known, add frequency and channel type to NL80211_CMD_GET_INTERFACE. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-13rt2800: zero registers of unused TX ringsJakub Kicinski1-0/+10
This is needed if we take over after drivers which use those. Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Reviewed-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-13rt2800: initialize queues before giving up due to DMA errorJakub Kicinski2-3/+5
Don't immediately abort .start if DMA is busy before we initialize the queues. Some drivers do not deinitialize queues properly and we would fail to take over after them. This behaviour is consistent with legacy driver. Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Reviewed-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-13rt2800: add disabling of DMA before loading firmwareJakub Kicinski1-0/+2
Legacy driver disables DMA before loading firmware. Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Reviewed-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-13rt2800: introduce wpdma_disable functionJakub Kicinski3-24/+19
Introduce wpdma_disable function to simplify the code. Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Reviewed-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-13mac80211: protect ->scanning by mutex in ieee80211_work_work()Stanislaw Gruszka1-3/+5
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-13mac80211: do not scan and monitor connection in parallelStanislaw Gruszka4-19/+53
Before we send probes in connection monitoring we check if scan is not pending. But we do that check without locking. Fix that and also do not start scan if connection monitoring is in progress. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-13Merge branch 'for-linville' of ↵John W. Linville85-2924/+3800
git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx
2012-04-12iwlwifi: dynamically determine lib_opsJohannes Berg14-736/+763
Having the pointer to lib_ops in the config makes it impossible to split the driver into different modules. Determine the ops based on the device family enumeration to get rid of the direct pointer. Also move all the opmode specific code from the iwl-[1256]000.c files into a new file iwl-agn-devices.c so that the former only have configuration data now. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12net/wireless: ipw2x00: add supported cipher suites to wiphy initializationStanislav Yakovlev3-0/+31
Driver doesn't report its supported cipher suites through cfg80211 interface. It still uses wext interface and probably will not work through nl80211, but will at least correctly advertise supported features. Bug was reported by Omar Siam. https://bugzilla.kernel.org/show_bug.cgi?id=43049 Signed-off-by: Stanislav Yakovlev <stas.yakovlev@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12prism54: replace open-coded ARRAY_SIZE with macroJim Cromie1-4/+2
Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12brcm80211: replace open-coded ARRAY_SIZE with the macroJim Cromie2-32/+12
Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12NFC: Fix LLCP link timeout typoSamuel Ortiz1-1/+1
We were sending the LTO TLV as a version TLV instead of the actual link timeout one. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12NFC: Add MIUX to the local LLCP general bytesSamuel Ortiz1-0/+10
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12NFC: pn533 Rx chaining supportSamuel Ortiz1-16/+128
When buffers on the receiption path exceed 262 bytes, the pn533 uses a chaining mechanism where the initiator has to send NULL data frames to fetch the remaining frames. We do that from a workqueue context while holding the cmd lock. Once the MI bit is gone, we aggregate the queued received skbs. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12NFC: Convert pn533 from tasklet to workqueuesSamuel Ortiz1-38/+48
There is no need for soft IRQ contexts, and workqueues are more flexible. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12NFC: Call llcp_add_header properly when sending LLCP DM or DISCSamuel Ortiz1-2/+2
dsap and ssap were swapped when sending DN or DISC. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12NFC: Fix LLCP TLV building routineSamuel Ortiz1-1/+1
The if logic could lead to zero length TLVs. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12NFC: No need to apply twice the modulo op to LLCP's recv_nSamuel Ortiz2-2/+2
recv_n is set properly when receiving an HDLC frame. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12NFC: Dump LLCP framesSamuel Ortiz1-0/+7
At KERN_DEBUG level. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12NFC: Add Core support to generate tag lost eventEric Lapuyade2-1/+76
Some HW/drivers get notifications when a tag moves out of the radio field. This notification is now forwarded to user space through netlink. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12NFC: Changed target activated state logicEric Lapuyade2-4/+23
Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12NFC: Fix next target_idx type and rename for clarityEric Lapuyade3-4/+4
Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12NFC: The core part should generate the target indexSamuel Ortiz5-6/+20
The target index can be used by userspace to uniquely identify a target and thus should be kept unique, per NFC adapter. Moreover, some protocols do not provide a logical index when discovering new targets, so we have to generate one for them. For NCI or pn533 to fetch their logical index, we added a logical_idx field to the target structure. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12NFC: Add HCI documentationEric Lapuyade1-0/+155
Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12NFC: SHDLC implementationEric Lapuyade4-0/+1058
Most NFC HCI chipsets actually use a simplified HDLC link layer to carry HCI payloads. This implementation registers itself as an HCI device on behalf of the NFC driver. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12NFC: HCI supportEric Lapuyade10-0/+1695
This is an implementation of ETSI TS 102 622 specification. Many NFC chipsets use HCI as the host <-> target protocol on top of a serial link like i2c. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12NFC: Export target lost functionEric Lapuyade2-0/+40
NFC drivers will call this routine when they detect that a tag leaves the RF field. This will eventually lead to the corresponding netlink event to be sent. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12NFC: Add a target lost netlink eventSamuel Ortiz3-0/+32
Some chips are capable of detecting when a tag is out of the field, so they could send a netlink event about it to userspace. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12ath9k: remove dead codeZefir Kurtisi6-16/+0
Clean up some orphaned code lines containing * unused variables (not referenced / write-only) * non-implemented function prototypes Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12mac80211: fix the assignment of PREQ's MAC address for Proactive RANNChun-Yeow Yeoh2-2/+5
Record the RANN sender's address only for RANNs that meet the acceptance criteria (per sections 13.10.12.4.2). Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Reviewed-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12mwifiex: use asynchronous firmware loadingAmitkumar Karwar4-48/+62
Make use of request_firmware_nowait instead of request_firmware to load FW asynchronously. This fixes timeouts introduced with recent udev changes. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12mwifiex: add support for WPS2.0Avinash Patil7-0/+105
This patches enables setting association request and probe request IE for station interface. WPS exchange between WPS2.0 AP and mwifiex STA Enrollee/External Registrar completes successfully. Tested with wpa_supplicant 1.0 and 2.0 devel. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12mwifiex: display correct country information in debugfs "info"Amitkumar Karwar3-3/+4
Use "priv->country_code" string to display country information in debugfs command "info" instead of "adapter->region_code". "adapter->region_code" contains default region code got from FW while initialization, whereas "priv->country_code" is updated in reg_notifier handler whenever there is a change in regulatory domain. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12mwifiex: set default regulatory domainAmitkumar Karwar3-0/+38
Driver gets region code from FW during initialisation. This patch makes use of it for settting default regulatory domain using regulatory_hint() API. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12mwifiex: fix typo in RSSI_HIGH event handlingBing Zhao1-1/+1
This is a copy-n-paste error introduced in recent patch "mwifiex: add set_cqm_rssi_config handler support". Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12iwlwifi: introduce device family enumJohannes Berg5-34/+61
This will later be used to dynamically bind the configuration data for DVM and MVM. For now, we can use it to get rid of the additional_nic_config() hook. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12iwlwifi: create device configuration header fileJohannes Berg2-142/+215
The iwl-shared.h header file will be going away soon. There isn't much left in it that we keep, other than the device configuration declarations. Move those out now to a new iwl-config.h header. iwl-cfg.h seemed like a possible alternative but those declarations will later live in the PCIe transport code. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12iwlwifi: move eeprom into privJohannes Berg13-172/+155
The whole code around eeprom is distributed across whole bunch of different files, most of which belong to the to-be-DVM code. As a result, it is currently very hard to split out the EEPROM code to be generic. However, it is also quite unlikely that the current EEPROM code will be needed by the MVM code as that has different mechanisms to query the EEPROM (it does so through the uCode.) So, at least temporarily, move everything into priv. If it becomes necessary to use the code from MVM, we will have to split it out, but then it's also easier since we'll know what pieces we need. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12iwlwifi: split force_reset debugfs fileJohannes Berg8-115/+62
Split the force_reset debugfs file into two different files: * "rf_reset" triggers a reset of the RF when written to and exposes statistics on RF resets when read * fw_restart triggers a firmware restart when written to and lives in the transport This cleans up all sources of firmware restart to originate within the transport layer and allows us to simplify some code. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12iwlwifi: remove ack_check module parameterJohannes Berg3-74/+0
This defaults to false, and we don't recommend to use it anywhere, so just remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12iwlwifi: move hw_params into privJohannes Berg17-169/+168
The hw_params are mostly values that are derived from the actual hardware config. As such, while it is possible that MVM will require similar ones, it makes more sense -- at least for now -- to put them into the DVM struct. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12iwlwifi: move queue watchdog into transportJohannes Berg11-141/+91
This removes one of the two sources of device restarts in the upper layer -- those are a bit inconvenient because normal restarts originate in the transport. By moving the watchdog down it can be treated the same. Also rewrite the watchdog logic. Timers are much more efficient when they never fire, so instead firing a timer every 500ms set up a timer for each TX queue and fire it only when the queue is really stuck. This avoids the CPU waking up when everything is working well. While at it, remove the wd_disable config item and replace it by simply setting wd_timeout to IWL_WATCHHDOG_DISABLED (0). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12iwlwifi: remove unneeded struct declarationsJohannes Berg1-2/+0
Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12iwlwifi: remove watchdog debugfs fileJohannes Berg1-25/+0
This file isn't really all that useful as when the watchdog triggered it's already too late, and the setting doesn't persist unlike e.g. a module parameter that could be added to the right config file. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12iwlwifi: move rx_page_order into transportJohannes Berg7-25/+29
That way it isn't needed in hw_params, which is shared data. It also isn't really what we should configure in the transport, that is better just 4k/8k, so configure a bool and derive the page order in the transport. This also means the transport doesn't need access to the module parameter any more. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12ipw2100: remove a redundant NULL check before calling release_firmware()Jesper Juhl1-2/+1
The release_firmware() function does its own NULL test so a test before calling it is rather redundant. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12wireless, orinoco: release_firmware() tests for NULL, remove explicit tests ↵Jesper Juhl1-5/+2
before calls It is redundant to test for NULL pointers before calling release_firmware() since the function does its own NULL test. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-12wireless, mwifiex: drop redundant NULL test before call to release_firmware()Jesper Juhl1-2/+1
Since release_firmware() does its own test for NULL it is redundant to do so before calling it. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 06:04:51 +0000