summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2009-11-06mac80211: async station powersave handlingJohannes Berg7-85/+200
Some devices require that all frames to a station are flushed when that station goes into powersave mode before being able to send frames to that station again when it wakes up or polls -- all in order to avoid reordering and too many or too few frames being sent to the station when it polls. Normally, this is the case unless the station goes to sleep and wakes up very quickly again. But in that case, frames for it may be pending on the hardware queues, and thus races could happen in the case of multiple hardware queues used for QoS/WMM. Normally this isn't a problem, but with the iwlwifi mechanism we need to make sure the race doesn't happen. This makes mac80211 able to cope with the race with driver help by a new WLAN_STA_PS_DRIVER per-station flag that can be controlled by the driver and tells mac80211 whether it can transmit frames or not. This flag must be set according to very specific rules outlined in the documentation for the function that controls it. When we buffer new frames for the station, we normally set the TIM bit right away, but while the driver has blocked transmission to that sta we need to avoid that as well since we cannot respond to the station if it wakes up due to the TIM bit. Once the driver unblocks, we can set the TIM bit. Similarly, when the station just wakes up, we need to wait until all other frames are flushed before we can transmit frames to that station, so the same applies here, we need to wait for the driver to give the OK. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-06rtl8187: Remove deprecated 'qual' from returned RX statusLarry Finger2-11/+3
The qual member of ieee80211_rx_status is deprecated. As a result, this driver no longer needs to calculate a quality value. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-06b43legacy: Remove deprecated 'qual' from returned RX statusLarry Finger2-3/+0
With the deprecation of the qual member of ieee80211_rx_status, that calculation and an associated constant can be removed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-06b43: Remove deprecated 'qual' from returned RX statusLarry Finger2-3/+0
With the deprecation of the qual member of ieee80211_rx_status, that calculation and an associated constant can be removed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-06ath5k: add LED support for Acer Aspire One AO751h/AO531hKeng-Yu Lin1-0/+2
Add LED support for a Foxconn AR242X module, found on the Acer Aspire One models AO751h/AO531h Signed-off-by: Keng-Yu Lin <keng-yu.lin@canonical.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-06rt2800: add rt2800lib (part four)Bartlomiej Zolnierkiewicz4-313/+161
Code unification. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-06rt2800: add rt2800lib (part three)Bartlomiej Zolnierkiewicz4-1057/+609
Code unification. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-06rt2x00: move REGISTER_BUSY_* definitions to rt2x00.hBartlomiej Zolnierkiewicz3-15/+9
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-06rt2800: add rt2800lib (part two)Bartlomiej Zolnierkiewicz4-1680/+887
Code unification. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-06rt2800: add rt2800lib (part one)Bartlomiej Zolnierkiewicz6-459/+264
Code unification. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-06rt2800: prepare for rt2800lib additionBartlomiej Zolnierkiewicz2-104/+133
Part of preparations for later code unification. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-06rt2x00: add support for different chipset interfacesBartlomiej Zolnierkiewicz1-0/+29
Enhance rt2x00 infrastructure by adding explicit information about used chipset interface to struct rt2x00_chip. The new field will be used by rt2800 drivers for rt2800 library. Also add commonly used rt2x00_intf_is_pci() and rt2x00_intf_is_usb() helpers to make code easier to read (noticed by Ivo van Doorn). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-06rt2800: fix comments in rt2800.hBartlomiej Zolnierkiewicz1-12/+9
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-06rt2800: fix duplication in header filesBartlomiej Zolnierkiewicz5-3597/+1821
Updated debugging scripts are located here: http://www.kernel.org/pub/linux/kernel/people/bart/rt2800/scripts/ (they also work fine with older drivers) Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-06rt2800usb: add RXINFO_DESC_SIZE definitionBartlomiej Zolnierkiewicz2-3/+4
Add RXINFO_DESC_SIZE definition and use it instead of abusing RXD_DESC_SIZE one (TXD_DESC_SIZE and RXD_DESC_SIZE are specific to PCI version of the chipset). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-06rt2800: add rt2800lib.hBartlomiej Zolnierkiewicz5-151/+101
Code unification. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-06rt2x00: fix rt2x00pci_register_multi[read,write]() argumentsBartlomiej Zolnierkiewicz2-12/+11
Change type of 'length' argument from u16 to u32 (all arguments match rt2x00usb_register_multi[read,write]() ones now). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-06rt2x00: fix rt2x00usb_regbusy_read() argumentsBartlomiej Zolnierkiewicz3-3/+3
Add const to 'field' argument of rt2x00usb_regbusy_read() (all arguments match rt2x00pci_regbusy_read() ones now). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-06rt2x00: fix rt2x00usb_register_multiwrite() argumentsBartlomiej Zolnierkiewicz2-4/+5
Add const to 'value' argument of rt2x00usb_register_multiwrite() (all arguments match rt2x00pci_register_multiwrite() ones now). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-06rt2800pci: convert to use struct rt2800_ops methodsBartlomiej Zolnierkiewicz2-6/+51
Add chipset registers access abstraction layer and prepare for later code unification. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-06rt2800usb: convert to use struct rt2800_ops methodsBartlomiej Zolnierkiewicz2-6/+51
Add chipset registers access abstraction layer and prepare for later code unification. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-06rt2x00: add driver private field to struct rt2x00_devBartlomiej Zolnierkiewicz1-0/+5
Enhance rt2x00 infrastructure by adding driver specific field to struct rt2x00_dev. The new field will be used by rt2800 drivers for chipset registers access abstraction layer. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-06rt2800pci: add rt2800_mcu_request() wrapperBartlomiej Zolnierkiewicz1-9/+16
Part of preparations for later code unification. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-06rt2800usb: add rt2800_mcu_request() wrapperBartlomiej Zolnierkiewicz1-10/+17
Part of preparations for later code unification. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-06rt2800pci: add rt2800_rf_[read,write]() wrappersBartlomiej Zolnierkiewicz1-13/+19
Part of preparations for later code unification. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-06rt2800usb: add rt2800_rf_[read,write]() wrappersBartlomiej Zolnierkiewicz1-13/+19
Part of preparations for later code unification. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-06rt2800pci: add rt2800_rfcsr_[read,write]() wrappersBartlomiej Zolnierkiewicz1-52/+64
Part of preparations for later code unification. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-06rt2800usb: add rt2800_rfcsr_[read,write]() wrappersBartlomiej Zolnierkiewicz1-42/+54
Part of preparations for later code unification. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-06rt2800pci: add rt2800_bbp_[read,write]() wrappersBartlomiej Zolnierkiewicz1-63/+75
Part of preparations for later code unification. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-06rt2800usb: add rt2800_bbp_[read,write]() wrappersBartlomiej Zolnierkiewicz1-63/+75
Part of preparations for later code unification. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-06rt2800pci: add rt2800_regbusy_read() wrapperBartlomiej Zolnierkiewicz2-6/+14
Part of preparations for later code unification. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-06rt2800usb: add rt2800_regbusy_read() wrapperBartlomiej Zolnierkiewicz2-5/+13
Part of preparations for later code unification. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-06rt2800pci: add rt2800_register_multi[read,write]() wrappersBartlomiej Zolnierkiewicz2-11/+26
Part of preparations for later code unification. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-06rt2800usb: add rt2800_register_multi[read,write]() wrappersBartlomiej Zolnierkiewicz2-8/+22
Part of preparations for later code unification. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-06rt2800pci: add rt2800_register_[read,write]() wrappersBartlomiej Zolnierkiewicz2-239/+261
Part of preparations for later code unification. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-06rt2800usb: add rt2800_register_[read,write]() wrappersBartlomiej Zolnierkiewicz2-192/+213
Part of preparations for later code unification. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-04wl1271: use __dev_alloc_skb() on RXLuis R. Rodriguez1-1/+1
RX is handled in a workqueue therefore allocating for GFP_ATOMIC is overkill and not required. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Acked-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-04mac80211: fix internal scan requestJohannes Berg1-0/+1
The internal scan request mac80211 uses to scan for IBSS networks was set up to contain no channels at all because n_channels wasn't set after setting up the channels array. Fix this to properly scan for networks. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-04mac80211: Fix IBSS mergeSujith1-0/+4
Currently, in IBSS mode, a single creator would go into a loop trying to merge/scan. This happens because the IBSS timer is rearmed on finishing a scan and the subsequent timer invocation requests another scan immediately. This patch fixes this issue by checking if we have just completed a scan run trying to merge with other IBSS networks. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-04rt2x00: remove needless ifdefs from rt2x00leds.hBartlomiej Zolnierkiewicz1-4/+0
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-04rt2800usb: fix comments in rt2800usb.hBartlomiej Zolnierkiewicz1-8/+8
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-04rt2800usb: use rt2x00usb_register_multiwrite() to set key entriesBartlomiej Zolnierkiewicz1-14/+4
Since struct hw_key_entry is 32-bytes large and is smaller than CSR cache size (which is 64-bytes large) we can use the standard rt2x00usb_register_multiwrite() helper to set key entries. This cleanup is a part of preparations for later code unification. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-04rt2x00: fix rt2x00usb_register_read() commentBartlomiej Zolnierkiewicz1-1/+1
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-04rt2800pci: fix comment about IV/EIV fieldsBartlomiej Zolnierkiewicz1-2/+2
The bit tested by hardware is TXD_W3_WIV and its value equals the negated value of ENTRY_TXD_ENCRYPT_IV bit. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-04rt2800pci: fix comment about register accessBartlomiej Zolnierkiewicz1-1/+3
Registers used for indirect BBP and RF registers access are respectively BBPCSR and RFCSR, also make it clear that all CSR registers access goes through rt2x00pci_register_[read,write]() methods. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-04rt2800pci: fix crypto in TX frameBartlomiej Zolnierkiewicz1-1/+1
Based on rt2800usb patch from Benoit PAPILLAULT (commit 17616310836ad2cc45a64576ef0e1520b0dcc81b). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-04rt2800usb: fix rt2800usb_rfcsr_read()Bartlomiej Zolnierkiewicz1-1/+1
The driver should write the read request into RF_CSR_CFG register and not BBP_CSR_CFG one in rt2800usb_rfcsr_read(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-04rt2800pci: make Kconfig help entry more helpfulBartlomiej Zolnierkiewicz1-1/+4
Document known issues with the driver to aid distribution makers, users and developers in making informed decisions instead of wasting their time needlessly. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-04rt2800usb: make Kconfig help entry more helpfulBartlomiej Zolnierkiewicz1-1/+5
Document known issues with the driver to aid distribution makers, users and developers in making informed decisions instead of wasting their time needlessly. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-04mac80211: make ieee80211_find_sta per virtual interfaceJohannes Berg7-9/+47
Since we have a TODO item to make all station management dependent on virtual interfaces, I figured I'd start with pushing such a change to drivers before more drivers start using the ieee80211_find_sta() API with a hw pointer and cause us grief later on. For now continue exporting the old API in form of ieee80211_find_sta_by_hw(), but discourage its use strongly. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 00:51:14 +0000