diff options
| -rw-r--r-- | Documentation/hwmon/da9055 | 47 | ||||
| -rw-r--r-- | drivers/hwmon/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/hwmon/Makefile | 1 | ||||
| -rw-r--r-- | drivers/hwmon/da9055-hwmon.c | 336 |
4 files changed, 394 insertions, 0 deletions
diff --git a/Documentation/hwmon/da9055 b/Documentation/hwmon/da9055 new file mode 100644 index 000000000000..855c3f536e00 --- /dev/null +++ b/Documentation/hwmon/da9055 @@ -0,0 +1,47 @@ +Supported chips: + * Dialog Semiconductors DA9055 PMIC + Prefix: 'da9055' + Datasheet: Datasheet is not publicly available. + +Authors: David Dajun Chen <dchen@diasemi.com> + +Description +----------- + +The DA9055 provides an Analogue to Digital Converter (ADC) with 10 bits +resolution and track and hold circuitry combined with an analogue input +multiplexer. The analogue input multiplexer will allow conversion of up to 5 +different inputs. The track and hold circuit ensures stable input voltages at +the input of the ADC during the conversion. + +The ADC is used to measure the following inputs: +Channel 0: VDDOUT - measurement of the system voltage +Channel 1: ADC_IN1 - high impedance input (0 - 2.5V) +Channel 2: ADC_IN2 - high impedance input (0 - 2.5V) +Channel 3: ADC_IN3 - high impedance input (0 - 2.5V) +Channel 4: Internal Tjunc. - sense (internal temp. sensor) + +By using sysfs attributes we can measure the system voltage VDDOUT, +chip junction temperature and auxiliary channels voltages. + +Voltage Monitoring +------------------ + +Voltages are sampled in a AUTO mode it can be manually sampled too and results +are stored in a 10 bit ADC. + +The system voltage is calculated as: + Milli volt = ((ADC value * 1000) / 85) + 2500 + +The voltages on ADC channels 1, 2 and 3 are calculated as: + Milli volt = (ADC value * 1000) / 102 + +Temperature Monitoring +---------------------- + +Temperatures are sampled by a 10 bit ADC. Junction temperatures +are monitored by the ADC channels. + +The junction temperature is calculated: + Degrees celsius = -0.4084 * (ADC_RES - T_OFFSET) + 307.6332 +The junction temperature attribute is supported by the driver. diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 42f21ad56276..4800d4c2a7b7 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -334,6 +334,16 @@ config SENSORS_DA9052_ADC This driver can also be built as module. If so, the module will be called da9052-hwmon. +config SENSORS_DA9055 + tristate "Dialog Semiconductor DA9055 ADC" + depends on MFD_DA9055 + help + If you say yes here you get support for ADC on the Dialog + Semiconductor DA9055 PMIC. + + This driver can also be built as a module. If so, the module + will be called da9055-hwmon. + config SENSORS_I5K_AMB tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets" depends on PCI diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 8d5fcb5e8e9f..a930f0997d25 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -44,6 +44,7 @@ obj-$(CONFIG_SENSORS_ASC7621) += asc7621.o obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o obj-$(CONFIG_SENSORS_CORETEMP) += coretemp.o obj-$(CONFIG_SENSORS_DA9052_ADC)+= da9052-hwmon.o +obj-$(CONFIG_SENSORS_DA9055)+= da9055-hwmon.o obj-$(CONFIG_SENSORS_DME1737) += dme1737.o obj-$(CONFIG_SENSORS_DS620) += ds620.o obj-$(CONFIG_SENSORS_DS1621) += ds1621.o diff --git a/drivers/hwmon/da9055-hwmon.c b/drivers/hwmon/da9055-hwmon.c new file mode 100644 index 000000000000..d32edaea86d5 --- /dev/null +++ b/drivers/hwmon/da9055-hwmon.c @@ -0,0 +1,336 @@ +/* + * HWMON Driver for Dialog DA9055 + * + * Copyright(c) 2012 Dialog Semiconductor Ltd. + * + * Author: David Dajun Chen <dchen@diasemi.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/completion.h> + +#include <linux/mfd/da9055/core.h> +#include <linux/mfd/da9055/reg.h> + +#define DA9055_ADCIN_DIV 102 +#define DA9055_VSYS_DIV 85 + +#define DA9055_ADC_VSYS 0 +#define DA9055_ADC_ADCIN1 1 +#define DA9055_ADC_ADCIN2 2 +#define DA9055_ADC_ADCIN3 3 +#define DA9055_ADC_TJUNC 4 + +struct da9055_hwmon { + struct da9055 *da9055; + struct device *class_device; + struct mutex hwmon_lock; + struct mutex irq_lock; + struct completion done; +}; + +static const char * const input_names[] = { + [DA9055_ADC_VSYS] = "VSYS", + [DA9055_ADC_ADCIN1] = "ADC IN1", + [DA9055_ADC_ADCIN2] = "ADC IN2", + [DA9055_ADC_ADCIN3] = "ADC IN3", + [DA9055_ADC_TJUNC] = "CHIP TEMP", +}; + +static const u8 chan_mux[DA9055_ADC_TJUNC + 1] = { + [DA9055_ADC_VSYS] = DA9055_ADC_MUX_VSYS, + [DA9055_ADC_ADCIN1] = DA9055_ADC_MUX_ADCIN1, + [DA9055_ADC_ADCIN2] = DA9055_ADC_MUX_ADCIN2, + [DA9055_ADC_ADCIN3] = DA9055_ADC_MUX_ADCIN1, + [DA9055_ADC_TJUNC] = DA9055_ADC_MUX_T_SENSE, +}; + +static int da9055_adc_manual_read(struct da9055_hwmon *hwmon, + unsigned char channel) +{ + int ret; + unsigned short calc_data; + unsigned short data; + unsigned char mux_sel; + struct da9055 *da9055 = hwmon->da9055; + + if (channel > DA9055_ADC_TJUNC) + return -EINVAL; + + mutex_lock(&hwmon->irq_lock); + + /* Selects desired MUX for manual conversion */ + mux_sel = chan_mux[channel] | DA9055_ADC_MAN_CONV; + + ret = da9055_reg_write(da9055, DA9055_REG_ADC_MAN, mux_sel); + if (ret < 0) + goto err; + + /* Wait for an interrupt */ + if (!wait_for_completion_timeout(&hwmon->done, + msecs_to_jiffies(500))) { + dev_err(da9055->dev, + "timeout waiting for ADC conversion interrupt\n"); + ret = -ETIMEDOUT; + goto err; + } + + ret = da9055_reg_read(da9055, DA9055_REG_ADC_RES_H); + if (ret < 0) + goto err; + + calc_data = (unsigned short)ret; + data = calc_data << 2; + + ret = da9055_reg_read(da9055, DA9055_REG_ADC_RES_L); + if (ret < 0) + goto err; + + calc_data = (unsigned short)(ret & DA9055_ADC_LSB_MASK); + data |= calc_data; + + ret = data; + +err: + mutex_unlock(&hwmon->irq_lock); + return ret; +} + +static irqreturn_t da9055_auxadc_irq(int irq, void *irq_data) +{ + struct da9055_hwmon *hwmon = irq_data; + + complete(&hwmon->done); + + return IRQ_HANDLED; +} + +/* Conversion function for VSYS and ADCINx */ +static inline int volt_reg_to_mV(int value, int channel) +{ + if (channel == DA9055_ADC_VSYS) + return DIV_ROUND_CLOSEST(value * 1000, DA9055_VSYS_DIV) + 2500; + else + return DIV_ROUND_CLOSEST(value * 1000, DA9055_ADCIN_DIV); +} + +static int da9055_enable_auto_mode(struct da9055 *da9055, int channel) +{ + + return da9055_reg_update(da9055, DA9055_REG_ADC_CONT, 1 << channel, + 1 << channel); + +} + +static int da9055_disable_auto_mode(struct da9055 *da9055, int channel) +{ + + return da9055_reg_update(da9055, DA9055_REG_ADC_CONT, 1 << channel, 0); +} + +static ssize_t da9055_read_auto_ch(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct da9055_hwmon *hwmon = dev_get_drvdata(dev); + int ret, adc; + int channel = to_sensor_dev_attr(devattr)->index; + + mutex_lock(&hwmon->hwmon_lock); + + ret = da9055_enable_auto_mode(hwmon->da9055, channel); + if (ret < 0) + goto hwmon_err; + + usleep_range(10000, 10500); + + adc = da9055_reg_read(hwmon->da9055, DA9055_REG_VSYS_RES + channel); + if (adc < 0) { + ret = adc; + goto hwmon_err_release; + } + + ret = da9055_disable_auto_mode(hwmon->da9055, channel); + if (ret < 0) + goto hwmon_err; + + mutex_unlock(&hwmon->hwmon_lock); + + return sprintf(buf, "%d\n", volt_reg_to_mV(adc, channel)); + +hwmon_err_release: + da9055_disable_auto_mode(hwmon->da9055, channel); +hwmon_err: + mutex_unlock(&hwmon->hwmon_lock); + return ret; +} + +static ssize_t da9055_read_tjunc(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct da9055_hwmon *hwmon = dev_get_drvdata(dev); + int tjunc; + int toffset; + + tjunc = da9055_adc_manual_read(hwmon, DA9055_ADC_TJUNC); + if (tjunc < 0) + return tjunc; + + toffset = da9055_reg_read(hwmon->da9055, DA9055_REG_T_OFFSET); + if (toffset < 0) + return toffset; + + /* + * Degrees celsius = -0.4084 * (ADC_RES - T_OFFSET) + 307.6332 + * T_OFFSET is a trim value used to improve accuracy of the result + */ + return sprintf(buf, "%d\n", DIV_ROUND_CLOSEST(-4084 * (tjunc - toffset) + + 3076332, 10000)); +} + +static ssize_t da9055_hwmon_show_name(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + return sprintf(buf, "da9055-hwmon\n"); +} + +static ssize_t show_label(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + return sprintf(buf, "%s\n", + input_names[to_sensor_dev_attr(devattr)->index]); +} + +static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, da9055_read_auto_ch, NULL, + DA9055_ADC_VSYS); +static SENSOR_DEVICE_ATTR(in0_label, S_IRUGO, show_label, NULL, + DA9055_ADC_VSYS); +static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, da9055_read_auto_ch, NULL, + DA9055_ADC_ADCIN1); +static SENSOR_DEVICE_ATTR(in1_label, S_IRUGO, show_label, NULL, + DA9055_ADC_ADCIN1); +static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, da9055_read_auto_ch, NULL, + DA9055_ADC_ADCIN2); +static SENSOR_DEVICE_ATTR(in2_label, S_IRUGO, show_label, NULL, + DA9055_ADC_ADCIN2); +static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, da9055_read_auto_ch, NULL, + DA9055_ADC_ADCIN3); +static SENSOR_DEVICE_ATTR(in3_label, S_IRUGO, show_label, NULL, + DA9055_ADC_ADCIN3); + +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, da9055_read_tjunc, NULL, + DA9055_ADC_TJUNC); +static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_label, NULL, + DA9055_ADC_TJUNC); + +static DEVICE_ATTR(name, S_IRUGO, da9055_hwmon_show_name, NULL); + +static struct attribute *da9055_attr[] = { + &dev_attr_name.attr, + &sensor_dev_attr_in0_input.dev_attr.attr, + &sensor_dev_attr_in0_label.dev_attr.attr, + &sensor_dev_attr_in1_input.dev_attr.attr, + &sensor_dev_attr_in1_label.dev_attr.attr, + &sensor_dev_attr_in2_input.dev_attr.attr, + &sensor_dev_attr_in2_label.dev_attr.attr, + &sensor_dev_attr_in3_input.dev_attr.attr, + &sensor_dev_attr_in3_label.dev_attr.attr, + + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp1_label.dev_attr.attr, + NULL +}; + +static const struct attribute_group da9055_attr_group = {.attrs = da9055_attr}; + +static int da9055_hwmon_probe(struct platform_device *pdev) +{ + struct da9055_hwmon *hwmon; + int hwmon_irq, ret; + + hwmon = devm_kzalloc(&pdev->dev, sizeof(struct da9055_hwmon), + GFP_KERNEL); + if (!hwmon) + return -ENOMEM; + + mutex_init(&hwmon->hwmon_lock); + mutex_init(&hwmon->irq_lock); + + init_completion(&hwmon->done); + hwmon->da9055 = dev_get_drvdata(pdev->dev.parent); + + platform_set_drvdata(pdev, hwmon); + + hwmon_irq = platform_get_irq_byname(pdev, "HWMON"); + if (hwmon_irq < 0) + return hwmon_irq; + + hwmon_irq = regmap_irq_get_virq(hwmon->da9055->irq_data, hwmon_irq); + if (hwmon_irq < 0) + return hwmon_irq; + + ret = devm_request_threaded_irq(&pdev->dev, hwmon_irq, + NULL, da9055_auxadc_irq, + IRQF_TRIGGER_HIGH | IRQF_ONESHOT, + "adc-irq", hwmon); + if (ret != 0) { + dev_err(hwmon->da9055->dev, "DA9055 ADC IRQ failed ret=%d\n", + ret); + return ret; + } + + ret = sysfs_create_group(&pdev->dev.kobj, &da9055_attr_group); + if (ret) + return ret; + + hwmon->class_device = hwmon_device_register(&pdev->dev); + if (IS_ERR(hwmon->class_device)) { + ret = PTR_ERR(hwmon->class_device); + goto err; + } + + return 0; + +err: + sysfs_remove_group(&pdev->dev.kobj, &da9055_attr_group); + return ret; +} + +static int da9055_hwmon_remove(struct platform_device *pdev) +{ + struct da9055_hwmon *hwmon = platform_get_drvdata(pdev); + + sysfs_remove_group(&pdev->dev.kobj, &da9055_attr_group); + hwmon_device_unregister(hwmon->class_device); + + return 0; +} + +static struct platform_driver da9055_hwmon_driver = { + .probe = da9055_hwmon_probe, + .remove = da9055_hwmon_remove, + .driver = { + .name = "da9055-hwmon", + .owner = THIS_MODULE, + }, +}; + +module_platform_driver(da9055_hwmon_driver); + +MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>"); +MODULE_DESCRIPTION("DA9055 HWMON driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:da9055-hwmon"); |