From 4d8b4072c58476ab68eef89e72e5597b6405f1aa Mon Sep 17 00:00:00 2001 From: Hoegeun Kwon Date: Wed, 5 Dec 2018 19:23:05 +0900 Subject: ARM: dts: bcm283x: Fix the priority of pixelvalve0 to the lowest value There is a problem that the vblank test can not be verified when the hdmi display is connected. Because the vblank test can only test crtc top index 0, 1. The Tizen mainly uses dsi and hdmi, so lower the priority of pixelvalve0 used with dpi. Change-Id: Id2b3024f5960d3526e7a815e47f6d802a13d38d3 Signed-off-by: Hoegeun Kwon --- arch/arm/boot/dts/bcm283x.dtsi | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index 22eca6fad427..60c1d2493cbc 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -426,18 +426,24 @@ status = "disabled"; }; - pixelvalve@7e206000 { - compatible = "brcm,bcm2835-pixelvalve0"; - reg = <0x7e206000 0x100>; - interrupts = <2 13>; /* pwa0 */ - }; - pixelvalve@7e207000 { compatible = "brcm,bcm2835-pixelvalve1"; reg = <0x7e207000 0x100>; interrupts = <2 14>; /* pwa1 */ }; + pixelvalve@7e807000 { + compatible = "brcm,bcm2835-pixelvalve2"; + reg = <0x7e807000 0x100>; + interrupts = <2 10>; /* pixelvalve */ + }; + + pixelvalve@7e206000 { + compatible = "brcm,bcm2835-pixelvalve0"; + reg = <0x7e206000 0x100>; + interrupts = <2 13>; /* pwa0 */ + }; + dpi: dpi@7e208000 { compatible = "brcm,bcm2835-dpi"; reg = <0x7e208000 0x8c>; @@ -611,12 +617,6 @@ status = "disabled"; }; - pixelvalve@7e807000 { - compatible = "brcm,bcm2835-pixelvalve2"; - reg = <0x7e807000 0x100>; - interrupts = <2 10>; /* pixelvalve */ - }; - hdmi: hdmi@7e902000 { compatible = "brcm,bcm2835-hdmi"; reg = <0x7e902000 0x600>, -- cgit v1.2.3