Merge tag 'tty-3.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver fixes from Greg KH:
 "Here are some tty and serial driver fixes for 3.19-rc5 that resolve
  some reported issues, and add a new device id to the 8250 serial port
  driver.

  All have been in linux-next with no reported problems"

* tag 'tty-3.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: samsung: Add the support for Exynos5433 SoC
  Revert "tty: Fix pty master poll() after slave closes v2"
  tty: Prevent hw state corruption in exclusive mode reopen
  tty: Add support for the WCH384 4S multi-IO card
  serial: fix parisc boot hang

5 files changed, 70 insertions, 35 deletions

diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index d2b496750d59..4ddfa60c9222 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -2399,17 +2399,12 @@ static unsigned int n_tty_poll(struct tty_struct *tty, struct file *file,
 
 	poll_wait(file, &tty->read_wait, wait);
 	poll_wait(file, &tty->write_wait, wait);
-	if (test_bit(TTY_OTHER_CLOSED, &tty->flags))
-		mask |= POLLHUP;
 	if (input_available_p(tty, 1))
 		mask |= POLLIN | POLLRDNORM;
-	else if (mask & POLLHUP) {
-		tty_flush_to_ldisc(tty);
-		if (input_available_p(tty, 1))
-			mask |= POLLIN | POLLRDNORM;
-	}
 	if (tty->packet && tty->link->ctrl_status)
 		mask |= POLLPRI | POLLIN | POLLRDNORM;
+	if (test_bit(TTY_OTHER_CLOSED, &tty->flags))
+		mask |= POLLHUP;
 	if (tty_hung_up_p(file))
 		mask |= POLLHUP;
 	if (!(mask & (POLLHUP | POLLIN | POLLRDNORM))) {
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 31feeb2d0a66..d1f8dc6aabcb 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1815,7 +1815,7 @@ pci_wch_ch353_setup(struct serial_private *priv,
 }
 
 static int
-pci_wch_ch382_setup(struct serial_private *priv,
+pci_wch_ch38x_setup(struct serial_private *priv,
                     const struct pciserial_board *board,
                     struct uart_8250_port *port, int idx)
 {
@@ -1880,6 +1880,7 @@ pci_wch_ch382_setup(struct serial_private *priv,
 
 #define PCIE_VENDOR_ID_WCH		0x1c00
 #define PCIE_DEVICE_ID_WCH_CH382_2S1P	0x3250
+#define PCIE_DEVICE_ID_WCH_CH384_4S	0x3470
 
 /* Unknown vendors/cards - this should not be in linux/pci_ids.h */
 #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584	0x1584
@@ -2571,13 +2572,21 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.subdevice	= PCI_ANY_ID,
 		.setup		= pci_wch_ch353_setup,
 	},
-	/* WCH CH382 2S1P card (16750 clone) */
+	/* WCH CH382 2S1P card (16850 clone) */
 	{
 		.vendor         = PCIE_VENDOR_ID_WCH,
 		.device         = PCIE_DEVICE_ID_WCH_CH382_2S1P,
 		.subvendor      = PCI_ANY_ID,
 		.subdevice      = PCI_ANY_ID,
-		.setup          = pci_wch_ch382_setup,
+		.setup          = pci_wch_ch38x_setup,
+	},
+	/* WCH CH384 4S card (16850 clone) */
+	{
+		.vendor         = PCIE_VENDOR_ID_WCH,
+		.device         = PCIE_DEVICE_ID_WCH_CH384_4S,
+		.subvendor      = PCI_ANY_ID,
+		.subdevice      = PCI_ANY_ID,
+		.setup          = pci_wch_ch38x_setup,
 	},
 	/*
 	 * ASIX devices with FIFO bug
@@ -2876,6 +2885,7 @@ enum pci_board_num_t {
 	pbn_fintek_4,
 	pbn_fintek_8,
 	pbn_fintek_12,
+	pbn_wch384_4,
 };
 
 /*
@@ -3675,6 +3685,14 @@ static struct pciserial_board pci_boards[] = {
 		.base_baud	= 115200,
 		.first_offset	= 0x40,
 	},
+
+	[pbn_wch384_4] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 4,
+		.base_baud      = 115200,
+		.uart_offset    = 8,
+		.first_offset   = 0xC0,
+	},
 };
 
 static const struct pci_device_id blacklist[] = {
@@ -3687,6 +3705,7 @@ static const struct pci_device_id blacklist[] = {
 	{ PCI_DEVICE(0x4348, 0x7053), }, /* WCH CH353 2S1P */
 	{ PCI_DEVICE(0x4348, 0x5053), }, /* WCH CH353 1S1P */
 	{ PCI_DEVICE(0x1c00, 0x3250), }, /* WCH CH382 2S1P */
+	{ PCI_DEVICE(0x1c00, 0x3470), }, /* WCH CH384 4S */
 };
 
 /*
@@ -5400,6 +5419,10 @@ static struct pci_device_id serial_pci_tbl[] = {
 		PCI_ANY_ID, PCI_ANY_ID,
 		0, 0, pbn_b0_bt_2_115200 },
 
+	{	PCIE_VENDOR_ID_WCH, PCIE_DEVICE_ID_WCH_CH384_4S,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0, pbn_wch384_4 },
+
 	/*
 	 * Commtech, Inc. Fastcom adapters
 	 */
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 19273e31d224..107e80722575 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -1757,32 +1757,43 @@ static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = {
 #endif
 
 #if defined(CONFIG_ARCH_EXYNOS)
+#define EXYNOS_COMMON_SERIAL_DRV_DATA				\
+	.info = &(struct s3c24xx_uart_info) {			\
+		.name		= "Samsung Exynos UART",	\
+		.type		= PORT_S3C6400,			\
+		.has_divslot	= 1,				\
+		.rx_fifomask	= S5PV210_UFSTAT_RXMASK,	\
+		.rx_fifoshift	= S5PV210_UFSTAT_RXSHIFT,	\
+		.rx_fifofull	= S5PV210_UFSTAT_RXFULL,	\
+		.tx_fifofull	= S5PV210_UFSTAT_TXFULL,	\
+		.tx_fifomask	= S5PV210_UFSTAT_TXMASK,	\
+		.tx_fifoshift	= S5PV210_UFSTAT_TXSHIFT,	\
+		.def_clk_sel	= S3C2410_UCON_CLKSEL0,		\
+		.num_clks	= 1,				\
+		.clksel_mask	= 0,				\
+		.clksel_shift	= 0,				\
+	},							\
+	.def_cfg = &(struct s3c2410_uartcfg) {			\
+		.ucon		= S5PV210_UCON_DEFAULT,		\
+		.ufcon		= S5PV210_UFCON_DEFAULT,	\
+		.has_fracval	= 1,				\
+	}							\
+
 static struct s3c24xx_serial_drv_data exynos4210_serial_drv_data = {
-	.info = &(struct s3c24xx_uart_info) {
-		.name		= "Samsung Exynos4 UART",
-		.type		= PORT_S3C6400,
-		.has_divslot	= 1,
-		.rx_fifomask	= S5PV210_UFSTAT_RXMASK,
-		.rx_fifoshift	= S5PV210_UFSTAT_RXSHIFT,
-		.rx_fifofull	= S5PV210_UFSTAT_RXFULL,
-		.tx_fifofull	= S5PV210_UFSTAT_TXFULL,
-		.tx_fifomask	= S5PV210_UFSTAT_TXMASK,
-		.tx_fifoshift	= S5PV210_UFSTAT_TXSHIFT,
-		.def_clk_sel	= S3C2410_UCON_CLKSEL0,
-		.num_clks	= 1,
-		.clksel_mask	= 0,
-		.clksel_shift	= 0,
-	},
-	.def_cfg = &(struct s3c2410_uartcfg) {
-		.ucon		= S5PV210_UCON_DEFAULT,
-		.ufcon		= S5PV210_UFCON_DEFAULT,
-		.has_fracval	= 1,
-	},
+	EXYNOS_COMMON_SERIAL_DRV_DATA,
 	.fifosize = { 256, 64, 16, 16 },
 };
+
+static struct s3c24xx_serial_drv_data exynos5433_serial_drv_data = {
+	EXYNOS_COMMON_SERIAL_DRV_DATA,
+	.fifosize = { 64, 256, 16, 256 },
+};
+
 #define EXYNOS4210_SERIAL_DRV_DATA ((kernel_ulong_t)&exynos4210_serial_drv_data)
+#define EXYNOS5433_SERIAL_DRV_DATA ((kernel_ulong_t)&exynos5433_serial_drv_data)
 #else
 #define EXYNOS4210_SERIAL_DRV_DATA (kernel_ulong_t)NULL
+#define EXYNOS5433_SERIAL_DRV_DATA (kernel_ulong_t)NULL
 #endif
 
 static struct platform_device_id s3c24xx_serial_driver_ids[] = {
@@ -1804,6 +1815,9 @@ static struct platform_device_id s3c24xx_serial_driver_ids[] = {
 	}, {
 		.name		= "exynos4210-uart",
 		.driver_data	= EXYNOS4210_SERIAL_DRV_DATA,
+	}, {
+		.name		= "exynos5433-uart",
+		.driver_data	= EXYNOS5433_SERIAL_DRV_DATA,
 	},
 	{ },
 };
@@ -1823,6 +1837,8 @@ static const struct of_device_id s3c24xx_uart_dt_match[] = {
 		.data = (void *)S5PV210_SERIAL_DRV_DATA },
 	{ .compatible = "samsung,exynos4210-uart",
 		.data = (void *)EXYNOS4210_SERIAL_DRV_DATA },
+	{ .compatible = "samsung,exynos5433-uart",
+		.data = (void *)EXYNOS5433_SERIAL_DRV_DATA },
 	{},
 };
 MODULE_DEVICE_TABLE(of, s3c24xx_uart_dt_match);
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 57ca61b14670..984605bb5bf1 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -2164,7 +2164,9 @@ uart_report_port(struct uart_driver *drv, struct uart_port *port)
 		break;
 	}
 
-	dev_info(port->dev, "%s%d at %s (irq = %d, base_baud = %d) is a %s\n",
+	printk(KERN_INFO "%s%s%s%d at %s (irq = %d, base_baud = %d) is a %s\n",
+	       port->dev ? dev_name(port->dev) : "",
+	       port->dev ? ": " : "",
 	       drv->dev_name,
 	       drv->tty_driver->name_base + port->line,
 	       address, port->irq, port->uartclk / 16, uart_type(port));
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 4f35b43e2475..51f066aa375e 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -1464,6 +1464,9 @@ static int tty_reopen(struct tty_struct *tty)
 	    driver->subtype == PTY_TYPE_MASTER)
 		return -EIO;
 
+	if (test_bit(TTY_EXCLUSIVE, &tty->flags) && !capable(CAP_SYS_ADMIN))
+		return -EBUSY;
+
 	tty->count++;
 
 	WARN_ON(!tty->ldisc);
@@ -2106,10 +2109,6 @@ retry_open:
 		retval = -ENODEV;
 	filp->f_flags = saved_flags;
 
-	if (!retval && test_bit(TTY_EXCLUSIVE, &tty->flags) &&
-						!capable(CAP_SYS_ADMIN))
-		retval = -EBUSY;
-
 	if (retval) {
 #ifdef TTY_DEBUG_HANGUP
 		printk(KERN_DEBUG "%s: error %d in opening %s...\n", __func__,