diff options
author | Logan Gunthorpe <logang@deltatee.com> | 2019-01-08 13:50:43 -0700 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2019-02-27 10:08:53 +0100 |
commit | 93f3f4c0fdeb084e5d46e379be7c1d49d97b1c57 (patch) | |
tree | 7df5420b630cabd11c8d7d7ed34ac458bd3e514d /drivers/scsi | |
parent | 14285a4a848776ed10b0765d98c34fcd28cbdc66 (diff) | |
download | linux-rpi3-93f3f4c0fdeb084e5d46e379be7c1d49d97b1c57.tar.gz linux-rpi3-93f3f4c0fdeb084e5d46e379be7c1d49d97b1c57.tar.bz2 linux-rpi3-93f3f4c0fdeb084e5d46e379be7c1d49d97b1c57.zip |
scsi: isci: initialize shost fully before calling scsi_add_host()
[ Upstream commit cc29a1b0a3f2597ce887d339222fa85b9307706d ]
scsi_mq_setup_tags(), which is called by scsi_add_host(), calculates the
command size to allocate based on the prot_capabilities. In the isci
driver, scsi_host_set_prot() is called after scsi_add_host() so the command
size gets calculated to be smaller than it needs to be. Eventually,
scsi_mq_init_request() locates the 'prot_sdb' after the command assuming it
was sized correctly and a buffer overrun may occur.
However, seeing blk_mq_alloc_rqs() rounds up to the nearest cache line
size, the mistake can go unnoticed.
The bug was noticed after the struct request size was reduced by commit
9d037ad707ed ("block: remove req->timeout_list")
Which likely reduced the allocated space for the request by an entire cache
line, enough that the overflow could be hit and it caused a panic, on boot,
at:
RIP: 0010:t10_pi_complete+0x77/0x1c0
Call Trace:
<IRQ>
sd_done+0xf5/0x340
scsi_finish_command+0xc3/0x120
blk_done_softirq+0x83/0xb0
__do_softirq+0xa1/0x2e6
irq_exit+0xbc/0xd0
call_function_single_interrupt+0xf/0x20
</IRQ>
sd_done() would call scsi_prot_sg_count() which reads the number of
entities in 'prot_sdb', but seeing 'prot_sdb' is located after the end of
the allocated space it reads a garbage number and erroneously calls
t10_pi_complete().
To prevent this, the calls to scsi_host_set_prot() are moved into
isci_host_alloc() before the call to scsi_add_host(). Out of caution, also
move the similar call to scsi_host_set_guard().
Fixes: 3d2d75254915 ("[SCSI] isci: T10 DIF support")
Link: http://lkml.kernel.org/r/da851333-eadd-163a-8c78-e1f4ec5ec857@deltatee.com
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Intel SCU Linux support <intel-linux-scu@intel.com>
Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Diffstat (limited to 'drivers/scsi')
-rw-r--r-- | drivers/scsi/isci/init.c | 14 |
1 files changed, 7 insertions, 7 deletions
diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index 08c7b1e25fe4..dde84f744313 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -588,6 +588,13 @@ static struct isci_host *isci_host_alloc(struct pci_dev *pdev, int id) shost->max_lun = ~0; shost->max_cmd_len = MAX_COMMAND_SIZE; + /* turn on DIF support */ + scsi_host_set_prot(shost, + SHOST_DIF_TYPE1_PROTECTION | + SHOST_DIF_TYPE2_PROTECTION | + SHOST_DIF_TYPE3_PROTECTION); + scsi_host_set_guard(shost, SHOST_DIX_GUARD_CRC); + err = scsi_add_host(shost, &pdev->dev); if (err) goto err_shost; @@ -675,13 +682,6 @@ static int isci_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) goto err_host_alloc; } pci_info->hosts[i] = h; - - /* turn on DIF support */ - scsi_host_set_prot(to_shost(h), - SHOST_DIF_TYPE1_PROTECTION | - SHOST_DIF_TYPE2_PROTECTION | - SHOST_DIF_TYPE3_PROTECTION); - scsi_host_set_guard(to_shost(h), SHOST_DIX_GUARD_CRC); } err = isci_setup_interrupts(pdev); |