Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next

Jeff Kirsher says:

====================
This series contains updates to ixgbe.

Jacob provides a fix for 82599 devices where it can potentially keep link
lights up when the adapter has gone down.

Mark provides a fix to resolve the possible use of uninitialized memory
by checking the return value on EEPROM reads.

Don provides 2 patches, one to fix a issue where we were traversing the
Tx ring with the value of IXGBE_NUM_RX_QUEUES which currently happens
to have the correct value but this is misleading.  A change later, could
easily make this no longer correct so when traversing the Tx ring, use
netdev->num_tx_queues.  His second patch does some minor clean ups of log
messages.

Emil provides the remaining ixgbe patches.  First he fixes the link test
where forcing the laser before the link check can lead to inconsistent
results because it does not guarantee that the link will be negotiated
correctly.  Then he initializes the message buffer array to 0 in order
to avoid using random numbers from the memory as a MAC address for the
VF.  Emil also fixes the read loop for the I2C data to account for the
offset for SFP+ modules.  Lastly, Emil provides several patches to add
support for QSFP modules where 1Gbps support is added as well as support
for older QSFP active direct attach cables which pre-date SFF-8436 v3.6.

v2: Fixed patch 4 description and added blank line based on feedback from
    Sergei Shtylyov
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

9 files changed, 239 insertions, 90 deletions

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
index 207f68fbe3d3..007a0083a636 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
@@ -49,6 +49,7 @@ static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
 static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw,
                                            ixgbe_link_speed speed,
                                            bool autoneg_wait_to_complete);
+static void ixgbe_stop_mac_link_on_d3_82599(struct ixgbe_hw *hw);
 static s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw,
 				      bool autoneg_wait_to_complete);
 static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw,
@@ -141,11 +142,13 @@ static s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw)
 			goto setup_sfp_out;
 		}
 
-		hw->eeprom.ops.read(hw, ++data_offset, &data_value);
+		if (hw->eeprom.ops.read(hw, ++data_offset, &data_value))
+			goto setup_sfp_err;
 		while (data_value != 0xffff) {
 			IXGBE_WRITE_REG(hw, IXGBE_CORECTL, data_value);
 			IXGBE_WRITE_FLUSH(hw);
-			hw->eeprom.ops.read(hw, ++data_offset, &data_value);
+			if (hw->eeprom.ops.read(hw, ++data_offset, &data_value))
+				goto setup_sfp_err;
 		}
 
 		/* Release the semaphore */
@@ -191,6 +194,17 @@ static s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw)
 
 setup_sfp_out:
 	return ret_val;
+
+setup_sfp_err:
+	/* Release the semaphore */
+	hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
+	/* Delay obtaining semaphore again to allow FW access,
+	 * semaphore_delay is in ms usleep_range needs us.
+	 */
+	usleep_range(hw->eeprom.semaphore_delay * 1000,
+		     hw->eeprom.semaphore_delay * 2000);
+	hw_err(hw, "eeprom read at offset %d failed\n", data_offset);
+	return IXGBE_ERR_SFP_SETUP_NOT_COMPLETE;
 }
 
 static s32 ixgbe_get_invariants_82599(struct ixgbe_hw *hw)
@@ -365,8 +379,13 @@ static s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw,
 
 	if (hw->phy.multispeed_fiber) {
 		*speed |= IXGBE_LINK_SPEED_10GB_FULL |
-		          IXGBE_LINK_SPEED_1GB_FULL;
-		*autoneg = true;
+			  IXGBE_LINK_SPEED_1GB_FULL;
+
+		/* QSFP must not enable auto-negotiation */
+		if (hw->phy.media_type == ixgbe_media_type_fiber_qsfp)
+			*autoneg = false;
+		else
+			*autoneg = true;
 	}
 
 out:
@@ -432,6 +451,24 @@ out:
 }
 
 /**
+ * ixgbe_stop_mac_link_on_d3_82599 - Disables link on D3
+ * @hw: pointer to hardware structure
+ *
+ * Disables link, should be called during D3 power down sequence.
+ *
+ */
+static void ixgbe_stop_mac_link_on_d3_82599(struct ixgbe_hw *hw)
+{
+	u32 autoc2_reg;
+
+	if (!hw->mng_fw_enabled && !hw->wol_enabled) {
+		autoc2_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
+		autoc2_reg |= IXGBE_AUTOC2_LINK_DISABLE_ON_D3_MASK;
+		IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2_reg);
+	}
+}
+
+/**
  *  ixgbe_start_mac_link_82599 - Setup MAC link settings
  *  @hw: pointer to hardware structure
  *  @autoneg_wait_to_complete: true when waiting for completion is needed
@@ -668,13 +705,18 @@ static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
 			goto out;
 
 		/* Set the module link speed */
-		if (hw->phy.media_type == ixgbe_media_type_fiber_fixed) {
-			ixgbe_set_fiber_fixed_speed(hw,
-					IXGBE_LINK_SPEED_10GB_FULL);
-		} else {
+		switch (hw->phy.media_type) {
+		case ixgbe_media_type_fiber:
 			esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5);
 			IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
 			IXGBE_WRITE_FLUSH(hw);
+			break;
+		case ixgbe_media_type_fiber_qsfp:
+			/* QSFP module automatically detects MAC link speed */
+			break;
+		default:
+			hw_dbg(hw, "Unexpected media type.\n");
+			break;
 		}
 
 		/* Allow module to change analog characteristics (1G->10G) */
@@ -725,14 +767,23 @@ static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
 			goto out;
 
 		/* Set the module link speed */
-		if (hw->phy.media_type == ixgbe_media_type_fiber_fixed) {
+		switch (hw->phy.media_type) {
+		case ixgbe_media_type_fiber_fixed:
 			ixgbe_set_fiber_fixed_speed(hw,
 						IXGBE_LINK_SPEED_1GB_FULL);
-		} else {
+			break;
+		case ixgbe_media_type_fiber:
 			esdp_reg &= ~IXGBE_ESDP_SDP5;
 			esdp_reg |= IXGBE_ESDP_SDP5_DIR;
 			IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
 			IXGBE_WRITE_FLUSH(hw);
+			break;
+		case ixgbe_media_type_fiber_qsfp:
+			/* QSFP module automatically detects MAC link speed */
+			break;
+		default:
+			hw_dbg(hw, "Unexpected media type.\n");
+			break;
 		}
 
 		/* Allow module to change analog characteristics (10G->1G) */
@@ -2161,6 +2212,7 @@ static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw)
 {
 	s32 status = IXGBE_ERR_EEPROM_VERSION;
 	u16 fw_offset, fw_ptp_cfg_offset;
+	u16 offset;
 	u16 fw_version = 0;
 
 	/* firmware check is only necessary for SFI devices */
@@ -2170,29 +2222,35 @@ static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw)
 	}
 
 	/* get the offset to the Firmware Module block */
-	hw->eeprom.ops.read(hw, IXGBE_FW_PTR, &fw_offset);
+	offset = IXGBE_FW_PTR;
+	if (hw->eeprom.ops.read(hw, offset, &fw_offset))
+		goto fw_version_err;
 
 	if ((fw_offset == 0) || (fw_offset == 0xFFFF))
 		goto fw_version_out;
 
 	/* get the offset to the Pass Through Patch Configuration block */
-	hw->eeprom.ops.read(hw, (fw_offset +
-	                         IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR),
-	                         &fw_ptp_cfg_offset);
+	offset = fw_offset + IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR;
+	if (hw->eeprom.ops.read(hw, offset, &fw_ptp_cfg_offset))
+		goto fw_version_err;
 
 	if ((fw_ptp_cfg_offset == 0) || (fw_ptp_cfg_offset == 0xFFFF))
 		goto fw_version_out;
 
 	/* get the firmware version */
-	hw->eeprom.ops.read(hw, (fw_ptp_cfg_offset +
-	                         IXGBE_FW_PATCH_VERSION_4),
-	                         &fw_version);
+	offset = fw_ptp_cfg_offset + IXGBE_FW_PATCH_VERSION_4;
+	if (hw->eeprom.ops.read(hw, offset, &fw_version))
+		goto fw_version_err;
 
 	if (fw_version > 0x5)
 		status = 0;
 
 fw_version_out:
 	return status;
+
+fw_version_err:
+	hw_err(hw, "eeprom read at offset %d failed\n", offset);
+	return IXGBE_ERR_EEPROM_VERSION;
 }
 
 /**
@@ -2477,6 +2535,7 @@ static struct ixgbe_mac_operations mac_ops_82599 = {
 	.set_lan_id             = &ixgbe_set_lan_id_multi_port_pcie,
 	.read_analog_reg8       = &ixgbe_read_analog_reg8_82599,
 	.write_analog_reg8      = &ixgbe_write_analog_reg8_82599,
+	.stop_link_on_d3	= &ixgbe_stop_mac_link_on_d3_82599,
 	.setup_link             = &ixgbe_setup_mac_link_82599,
 	.set_rxpba		= &ixgbe_set_rxpba_generic,
 	.check_link             = &ixgbe_check_mac_link_generic,
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
index 50e62a2b1a65..b5c434b617b1 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
@@ -2740,13 +2740,19 @@ out:
 static s32 ixgbe_get_san_mac_addr_offset(struct ixgbe_hw *hw,
                                         u16 *san_mac_offset)
 {
+	s32 ret_val;
+
 	/*
 	 * First read the EEPROM pointer to see if the MAC addresses are
 	 * available.
 	 */
-	hw->eeprom.ops.read(hw, IXGBE_SAN_MAC_ADDR_PTR, san_mac_offset);
+	ret_val = hw->eeprom.ops.read(hw, IXGBE_SAN_MAC_ADDR_PTR,
+				      san_mac_offset);
+	if (ret_val)
+		hw_err(hw, "eeprom read at offset %d failed\n",
+		       IXGBE_SAN_MAC_ADDR_PTR);
 
-	return 0;
+	return ret_val;
 }
 
 /**
@@ -2763,23 +2769,16 @@ s32 ixgbe_get_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr)
 {
 	u16 san_mac_data, san_mac_offset;
 	u8 i;
+	s32 ret_val;
 
 	/*
 	 * First read the EEPROM pointer to see if the MAC addresses are
 	 * available.  If they're not, no point in calling set_lan_id() here.
 	 */
-	ixgbe_get_san_mac_addr_offset(hw, &san_mac_offset);
+	ret_val = ixgbe_get_san_mac_addr_offset(hw, &san_mac_offset);
+	if (ret_val || san_mac_offset == 0 || san_mac_offset == 0xFFFF)
 
-	if ((san_mac_offset == 0) || (san_mac_offset == 0xFFFF)) {
-		/*
-		 * No addresses available in this EEPROM.  It's not an
-		 * error though, so just wipe the local address and return.
-		 */
-		for (i = 0; i < 6; i++)
-			san_mac_addr[i] = 0xFF;
-
-		goto san_mac_addr_out;
-	}
+		goto san_mac_addr_clr;
 
 	/* make sure we know which port we need to program */
 	hw->mac.ops.set_lan_id(hw);
@@ -2787,14 +2786,26 @@ s32 ixgbe_get_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr)
 	(hw->bus.func) ? (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT1_OFFSET) :
 	                 (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT0_OFFSET);
 	for (i = 0; i < 3; i++) {
-		hw->eeprom.ops.read(hw, san_mac_offset, &san_mac_data);
+		ret_val = hw->eeprom.ops.read(hw, san_mac_offset,
+					      &san_mac_data);
+		if (ret_val) {
+			hw_err(hw, "eeprom read at offset %d failed\n",
+			       san_mac_offset);
+			goto san_mac_addr_clr;
+		}
 		san_mac_addr[i * 2] = (u8)(san_mac_data);
 		san_mac_addr[i * 2 + 1] = (u8)(san_mac_data >> 8);
 		san_mac_offset++;
 	}
-
-san_mac_addr_out:
 	return 0;
+
+san_mac_addr_clr:
+	/* No addresses available in this EEPROM.  It's not necessarily an
+	 * error though, so just wipe the local address and return.
+	 */
+	for (i = 0; i < 6; i++)
+		san_mac_addr[i] = 0xFF;
+	return ret_val;
 }
 
 /**
@@ -3243,8 +3254,9 @@ s32 ixgbe_get_wwn_prefix_generic(struct ixgbe_hw *hw, u16 *wwnn_prefix,
 	*wwpn_prefix = 0xFFFF;
 
 	/* check if alternative SAN MAC is supported */
-	hw->eeprom.ops.read(hw, IXGBE_ALT_SAN_MAC_ADDR_BLK_PTR,
-	                    &alt_san_mac_blk_offset);
+	offset = IXGBE_ALT_SAN_MAC_ADDR_BLK_PTR;
+	if (hw->eeprom.ops.read(hw, offset, &alt_san_mac_blk_offset))
+		goto wwn_prefix_err;
 
 	if ((alt_san_mac_blk_offset == 0) ||
 	    (alt_san_mac_blk_offset == 0xFFFF))
@@ -3252,19 +3264,26 @@ s32 ixgbe_get_wwn_prefix_generic(struct ixgbe_hw *hw, u16 *wwnn_prefix,
 
 	/* check capability in alternative san mac address block */
 	offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_CAPS_OFFSET;
-	hw->eeprom.ops.read(hw, offset, &caps);
+	if (hw->eeprom.ops.read(hw, offset, &caps))
+		goto wwn_prefix_err;
 	if (!(caps & IXGBE_ALT_SAN_MAC_ADDR_CAPS_ALTWWN))
 		goto wwn_prefix_out;
 
 	/* get the corresponding prefix for WWNN/WWPN */
 	offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_WWNN_OFFSET;
-	hw->eeprom.ops.read(hw, offset, wwnn_prefix);
+	if (hw->eeprom.ops.read(hw, offset, wwnn_prefix))
+		hw_err(hw, "eeprom read at offset %d failed\n", offset);
 
 	offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_WWPN_OFFSET;
-	hw->eeprom.ops.read(hw, offset, wwpn_prefix);
+	if (hw->eeprom.ops.read(hw, offset, wwpn_prefix))
+		goto wwn_prefix_err;
 
 wwn_prefix_out:
 	return 0;
+
+wwn_prefix_err:
+	hw_err(hw, "eeprom read at offset %d failed\n", offset);
+	return 0;
 }
 
 /**
@@ -3778,7 +3797,11 @@ s32 ixgbe_init_thermal_sensor_thresh_generic(struct ixgbe_hw *hw)
 		u8  sensor_index;
 		u8  sensor_location;
 
-		hw->eeprom.ops.read(hw, (ets_offset + 1 + i), &ets_sensor);
+		if (hw->eeprom.ops.read(hw, ets_offset + 1 + i, &ets_sensor)) {
+			hw_err(hw, "eeprom read at offset %d failed\n",
+			       ets_offset + 1 + i);
+			continue;
+		}
 		sensor_index = ((ets_sensor & IXGBE_ETS_DATA_INDEX_MASK) >>
 				IXGBE_ETS_DATA_INDEX_SHIFT);
 		sensor_location = ((ets_sensor & IXGBE_ETS_DATA_LOC_MASK) >>
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
index 1315b8ac7f58..d259dc76604e 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
@@ -143,8 +143,12 @@ s32 ixgbe_init_thermal_sensor_thresh_generic(struct ixgbe_hw *hw);
 
 #define IXGBE_WRITE_FLUSH(a) IXGBE_READ_REG(a, IXGBE_STATUS)
 
+#define ixgbe_hw_to_netdev(hw) (((struct ixgbe_adapter *)(hw)->back)->netdev)
+
 #define hw_dbg(hw, format, arg...) \
-	netdev_dbg(((struct ixgbe_adapter *)(hw->back))->netdev, format, ##arg)
+	netdev_dbg(ixgbe_hw_to_netdev(hw), format, ## arg)
+#define hw_err(hw, format, arg...) \
+	netdev_err(ixgbe_hw_to_netdev(hw), format, ## arg)
 #define e_dev_info(format, arg...) \
 	dev_info(&adapter->pdev->dev, format, ## arg)
 #define e_dev_warn(format, arg...) \
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
index 50c1e9b2fd80..0e1b973659b0 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
@@ -311,9 +311,6 @@ static int ixgbe_set_settings(struct net_device *netdev,
 		 * this function does not support duplex forcing, but can
 		 * limit the advertising of the adapter to the specified speed
 		 */
-		if (ecmd->autoneg == AUTONEG_DISABLE)
-			return -EINVAL;
-
 		if (ecmd->advertising & ~ecmd->supported)
 			return -EINVAL;
 
@@ -1049,7 +1046,7 @@ static void ixgbe_get_ethtool_stats(struct net_device *netdev,
 		data[i] = (ixgbe_gstrings_stats[i].sizeof_stat ==
 		           sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
 	}
-	for (j = 0; j < IXGBE_NUM_RX_QUEUES; j++) {
+	for (j = 0; j < netdev->num_tx_queues; j++) {
 		ring = adapter->tx_ring[j];
 		if (!ring) {
 			data[i] = 0;
@@ -1885,11 +1882,12 @@ static void ixgbe_diag_test(struct net_device *netdev,
                             struct ethtool_test *eth_test, u64 *data)
 {
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
-	struct ixgbe_hw *hw = &adapter->hw;
 	bool if_running = netif_running(netdev);
 
 	set_bit(__IXGBE_TESTING, &adapter->state);
 	if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
+		struct ixgbe_hw *hw = &adapter->hw;
+
 		if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) {
 			int i;
 			for (i = 0; i < adapter->num_vfs; i++) {
@@ -1913,21 +1911,18 @@ static void ixgbe_diag_test(struct net_device *netdev,
 		/* Offline tests */
 		e_info(hw, "offline testing starting\n");
 
-		if (if_running)
-			/* indicate we're in test mode */
-			dev_close(netdev);
-
-		/* bringing adapter down disables SFP+ optics */
-		if (hw->mac.ops.enable_tx_laser)
-			hw->mac.ops.enable_tx_laser(hw);
-
 		/* Link test performed before hardware reset so autoneg doesn't
 		 * interfere with test result
 		 */
 		if (ixgbe_link_test(adapter, &data[4]))
 			eth_test->flags |= ETH_TEST_FL_FAILED;
 
-		ixgbe_reset(adapter);
+		if (if_running)
+			/* indicate we're in test mode */
+			dev_close(netdev);
+		else
+			ixgbe_reset(adapter);
+
 		e_info(hw, "register testing starting\n");
 		if (ixgbe_reg_test(adapter, &data[0]))
 			eth_test->flags |= ETH_TEST_FL_FAILED;
@@ -1964,13 +1959,11 @@ skip_loopback:
 		clear_bit(__IXGBE_TESTING, &adapter->state);
 		if (if_running)
 			dev_open(netdev);
+		else if (hw->mac.ops.disable_tx_laser)
+			hw->mac.ops.disable_tx_laser(hw);
 	} else {
 		e_info(hw, "online testing starting\n");
 
-		/* if adapter is down, SFP+ optics will be disabled */
-		if (!if_running && hw->mac.ops.enable_tx_laser)
-			hw->mac.ops.enable_tx_laser(hw);
-
 		/* Online tests */
 		if (ixgbe_link_test(adapter, &data[4]))
 			eth_test->flags |= ETH_TEST_FL_FAILED;
@@ -1984,9 +1977,6 @@ skip_loopback:
 		clear_bit(__IXGBE_TESTING, &adapter->state);
 	}
 
-	/* if adapter was down, ensure SFP+ optics are disabled again */
-	if (!if_running && hw->mac.ops.disable_tx_laser)
-		hw->mac.ops.disable_tx_laser(hw);
 skip_ol_tests:
 	msleep_interruptible(4 * 1000);
 }
@@ -2953,28 +2943,27 @@ static int ixgbe_get_module_eeprom(struct net_device *dev,
 	u32 status = IXGBE_ERR_PHY_ADDR_INVALID;
 	u8 databyte = 0xFF;
 	int i = 0;
-	int ret_val = 0;
 
 	if (ee->len == 0)
 		return -EINVAL;
 
-	for (i = ee->offset; i < ee->len; i++) {
+	for (i = ee->offset; i < ee->offset + ee->len; i++) {
 		/* I2C reads can take long time */
 		if (test_bit(__IXGBE_IN_SFP_INIT, &adapter->state))
 			return -EBUSY;
 
 		if (i < ETH_MODULE_SFF_8079_LEN)
-			status  = hw->phy.ops.read_i2c_eeprom(hw, i, &databyte);
+			status = hw->phy.ops.read_i2c_eeprom(hw, i, &databyte);
 		else
 			status = hw->phy.ops.read_i2c_sff8472(hw, i, &databyte);
 
 		if (status != 0)
-			ret_val = -EIO;
+			return -EIO;
 
 		data[i - ee->offset] = databyte;
 	}
 
-	return ret_val;
+	return 0;
 }
 
 static const struct ethtool_ops ixgbe_ethtool_ops = {
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 128d6b885326..7aba452833e5 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -4175,6 +4175,10 @@ static inline bool ixgbe_is_sfp(struct ixgbe_hw *hw)
 	case ixgbe_phy_sfp_passive_unknown:
 	case ixgbe_phy_sfp_active_unknown:
 	case ixgbe_phy_sfp_ftl_active:
+	case ixgbe_phy_qsfp_passive_unknown:
+	case ixgbe_phy_qsfp_active_unknown:
+	case ixgbe_phy_qsfp_intel:
+	case ixgbe_phy_qsfp_unknown:
 		return true;
 	case ixgbe_phy_nl:
 		if (hw->mac.type == ixgbe_mac_82598EB)
@@ -5292,6 +5296,9 @@ static int __ixgbe_shutdown(struct pci_dev *pdev, bool *enable_wake)
 		return retval;
 
 #endif
+	if (hw->mac.ops.stop_link_on_d3)
+		hw->mac.ops.stop_link_on_d3(hw);
+
 	if (wufc) {
 		ixgbe_set_rx_mode(netdev);
 
@@ -7602,10 +7609,8 @@ static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	    hw->mac.type == ixgbe_mac_82598EB) {
 		err = 0;
 	} else if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
-		e_dev_err("failed to load because an unsupported SFP+ "
-			  "module type was detected.\n");
-		e_dev_err("Reload the driver after installing a supported "
-			  "module.\n");
+		e_dev_err("failed to load because an unsupported SFP+ or QSFP module type was detected.\n");
+		e_dev_err("Reload the driver after installing a supported module.\n");
 		goto err_sw_init;
 	} else if (err) {
 		e_dev_err("HW Init failed: %d\n", err);
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
index 369eef526bc1..e4c676006be9 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
@@ -791,6 +791,8 @@ s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw)
 		 * Read control word from PHY init contents offset
 		 */
 		ret_val = hw->eeprom.ops.read(hw, data_offset, &eword);
+		if (ret_val)
+			goto err_eeprom;
 		control = (eword & IXGBE_CONTROL_MASK_NL) >>
 		           IXGBE_CONTROL_SHIFT_NL;
 		edata = eword & IXGBE_DATA_MASK_NL;
@@ -803,10 +805,15 @@ s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw)
 		case IXGBE_DATA_NL:
 			hw_dbg(hw, "DATA:\n");
 			data_offset++;
-			hw->eeprom.ops.read(hw, data_offset++,
-			                    &phy_offset);
+			ret_val = hw->eeprom.ops.read(hw, data_offset++,
+						      &phy_offset);
+			if (ret_val)
+				goto err_eeprom;
 			for (i = 0; i < edata; i++) {
-				hw->eeprom.ops.read(hw, data_offset, &eword);
+				ret_val = hw->eeprom.ops.read(hw, data_offset,
+							      &eword);
+				if (ret_val)
+					goto err_eeprom;
 				hw->phy.ops.write_reg(hw, phy_offset,
 				                      MDIO_MMD_PMAPMD, eword);
 				hw_dbg(hw, "Wrote %4.4x to %4.4x\n", eword,
@@ -838,6 +845,10 @@ s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw)
 
 out:
 	return ret_val;
+
+err_eeprom:
+	hw_err(hw, "eeprom read at offset %d failed\n", data_offset);
+	return IXGBE_ERR_PHY;
 }
 
 /**
@@ -1164,6 +1175,10 @@ s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw)
 	u8 comp_codes_10g = 0;
 	u8 oui_bytes[3] = {0, 0, 0};
 	u16 enforce_sfp = 0;
+	u8 connector = 0;
+	u8 cable_length = 0;
+	u8 device_tech = 0;
+	bool active_cable = false;
 
 	if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_fiber_qsfp) {
 		hw->phy.sfp_type = ixgbe_sfp_type_not_present;
@@ -1194,18 +1209,18 @@ s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw)
 	if (status != 0)
 		goto err_read_i2c_eeprom;
 
+	status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_QSFP_1GBE_COMP,
+					     &comp_codes_1g);
+
+	if (status != 0)
+		goto err_read_i2c_eeprom;
+
 	if (comp_codes_10g & IXGBE_SFF_QSFP_DA_PASSIVE_CABLE) {
 		hw->phy.type = ixgbe_phy_qsfp_passive_unknown;
 		if (hw->bus.lan_id == 0)
 			hw->phy.sfp_type = ixgbe_sfp_type_da_cu_core0;
 		else
 			hw->phy.sfp_type = ixgbe_sfp_type_da_cu_core1;
-	} else if (comp_codes_10g & IXGBE_SFF_QSFP_DA_ACTIVE_CABLE) {
-		hw->phy.type = ixgbe_phy_qsfp_active_unknown;
-		if (hw->bus.lan_id == 0)
-			hw->phy.sfp_type = ixgbe_sfp_type_da_act_lmt_core0;
-		else
-			hw->phy.sfp_type = ixgbe_sfp_type_da_act_lmt_core1;
 	} else if (comp_codes_10g & (IXGBE_SFF_10GBASESR_CAPABLE |
 				     IXGBE_SFF_10GBASELR_CAPABLE)) {
 		if (hw->bus.lan_id == 0)
@@ -1213,10 +1228,47 @@ s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw)
 		else
 			hw->phy.sfp_type = ixgbe_sfp_type_srlr_core1;
 	} else {
-		/* unsupported module type */
-		hw->phy.type = ixgbe_phy_sfp_unsupported;
-		status = IXGBE_ERR_SFP_NOT_SUPPORTED;
-		goto out;
+		if (comp_codes_10g & IXGBE_SFF_QSFP_DA_ACTIVE_CABLE)
+			active_cable = true;
+
+		if (!active_cable) {
+			/* check for active DA cables that pre-date
+			 * SFF-8436 v3.6
+			 */
+			hw->phy.ops.read_i2c_eeprom(hw,
+					IXGBE_SFF_QSFP_CONNECTOR,
+					&connector);
+
+			hw->phy.ops.read_i2c_eeprom(hw,
+					IXGBE_SFF_QSFP_CABLE_LENGTH,
+					&cable_length);
+
+			hw->phy.ops.read_i2c_eeprom(hw,
+					IXGBE_SFF_QSFP_DEVICE_TECH,
+					&device_tech);
+
+			if ((connector ==
+				     IXGBE_SFF_QSFP_CONNECTOR_NOT_SEPARABLE) &&
+			    (cable_length > 0) &&
+			    ((device_tech >> 4) ==
+				     IXGBE_SFF_QSFP_TRANSMITER_850NM_VCSEL))
+				active_cable = true;
+		}
+
+		if (active_cable) {
+			hw->phy.type = ixgbe_phy_qsfp_active_unknown;
+			if (hw->bus.lan_id == 0)
+				hw->phy.sfp_type =
+						ixgbe_sfp_type_da_act_lmt_core0;
+			else
+				hw->phy.sfp_type =
+						ixgbe_sfp_type_da_act_lmt_core1;
+		} else {
+			/* unsupported module type */
+			hw->phy.type = ixgbe_phy_sfp_unsupported;
+			status = IXGBE_ERR_SFP_NOT_SUPPORTED;
+			goto out;
+		}
 	}
 
 	if (hw->phy.sfp_type != stored_sfp_type)
@@ -1271,7 +1323,7 @@ s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw)
 				status = 0;
 			} else {
 				if (hw->allow_unsupported_sfp == true) {
-					e_warn(hw, "WARNING: Intel (R) Network Connections are quality tested using Intel (R) Ethernet Optics. Using untested modules is not supported and may cause unstable operation or damage to the module or the adapter. Intel Corporation is not responsible for any harm caused by using untested modules.\n");
+					e_warn(drv, "WARNING: Intel (R) Network Connections are quality tested using Intel (R) Ethernet Optics. Using untested modules is not supported and may cause unstable operation or damage to the module or the adapter. Intel Corporation is not responsible for any harm caused by using untested modules.\n");
 					status = 0;
 				} else {
 					hw_dbg(hw,
@@ -1339,7 +1391,11 @@ s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw,
 		sfp_type = ixgbe_sfp_type_srlr_core1;
 
 	/* Read offset to PHY init contents */
-	hw->eeprom.ops.read(hw, IXGBE_PHY_INIT_OFFSET_NL, list_offset);
+	if (hw->eeprom.ops.read(hw, IXGBE_PHY_INIT_OFFSET_NL, list_offset)) {
+		hw_err(hw, "eeprom read at %d failed\n",
+		       IXGBE_PHY_INIT_OFFSET_NL);
+		return IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT;
+	}
 
 	if ((!*list_offset) || (*list_offset == 0xFFFF))
 		return IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT;
@@ -1351,12 +1407,14 @@ s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw,
 	 * Find the matching SFP ID in the EEPROM
 	 * and program the init sequence
 	 */
-	hw->eeprom.ops.read(hw, *list_offset, &sfp_id);
+	if (hw->eeprom.ops.read(hw, *list_offset, &sfp_id))
+		goto err_phy;
 
 	while (sfp_id != IXGBE_PHY_INIT_END_NL) {
 		if (sfp_id == sfp_type) {
 			(*list_offset)++;
-			hw->eeprom.ops.read(hw, *list_offset, data_offset);
+			if (hw->eeprom.ops.read(hw, *list_offset, data_offset))
+				goto err_phy;
 			if ((!*data_offset) || (*data_offset == 0xFFFF)) {
 				hw_dbg(hw, "SFP+ module not supported\n");
 				return IXGBE_ERR_SFP_NOT_SUPPORTED;
@@ -1366,7 +1424,7 @@ s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw,
 		} else {
 			(*list_offset) += 2;
 			if (hw->eeprom.ops.read(hw, *list_offset, &sfp_id))
-				return IXGBE_ERR_PHY;
+				goto err_phy;
 		}
 	}
 
@@ -1376,6 +1434,10 @@ s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw,
 	}
 
 	return 0;
+
+err_phy:
+	hw_err(hw, "eeprom read at offset %d failed\n", *list_offset);
+	return IXGBE_ERR_PHY;
 }
 
 /**
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
index 138dadd7cf33..24af12e3719e 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
@@ -50,8 +50,11 @@
 #define IXGBE_SFF_QSFP_VENDOR_OUI_BYTE0	0xA5
 #define IXGBE_SFF_QSFP_VENDOR_OUI_BYTE1	0xA6
 #define IXGBE_SFF_QSFP_VENDOR_OUI_BYTE2	0xA7
+#define IXGBE_SFF_QSFP_CONNECTOR	0x82
 #define IXGBE_SFF_QSFP_10GBE_COMP	0x83
 #define IXGBE_SFF_QSFP_1GBE_COMP	0x86
+#define IXGBE_SFF_QSFP_CABLE_LENGTH	0x92
+#define IXGBE_SFF_QSFP_DEVICE_TECH	0x93
 
 /* Bitmasks */
 #define IXGBE_SFF_DA_PASSIVE_CABLE           0x4
@@ -68,6 +71,8 @@
 #define IXGBE_SFF_ADDRESSING_MODE	     0x4
 #define IXGBE_SFF_QSFP_DA_ACTIVE_CABLE       0x1
 #define IXGBE_SFF_QSFP_DA_PASSIVE_CABLE      0x8
+#define IXGBE_SFF_QSFP_CONNECTOR_NOT_SEPARABLE	0x23
+#define IXGBE_SFF_QSFP_TRANSMITER_850NM_VCSEL	0x0
 #define IXGBE_I2C_EEPROM_READ_MASK           0x100
 #define IXGBE_I2C_EEPROM_STATUS_MASK         0x3
 #define IXGBE_I2C_EEPROM_STATUS_NO_OPERATION 0x0
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
index 73c8e73bb6e7..276d7b135332 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
@@ -639,8 +639,8 @@ static int ixgbe_vf_reset_msg(struct ixgbe_adapter *adapter, u32 vf)
 {
 	struct ixgbe_hw *hw = &adapter->hw;
 	unsigned char *vf_mac = adapter->vfinfo[vf].vf_mac_addresses;
-	u32 reg, msgbuf[4];
-	u32 reg_offset, vf_shift;
+	u32 reg, reg_offset, vf_shift;
+	u32 msgbuf[4] = {0, 0, 0, 0};
 	u8 *addr = (u8 *)(&msgbuf[1]);
 
 	e_info(probe, "VF Reset msg received from vf %d\n", vf);
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
index 161ff18be775..6442cf8f9dce 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
@@ -1596,6 +1596,7 @@ enum {
 #define IXGBE_AUTOC2_10G_KR  (0x0 << IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT)
 #define IXGBE_AUTOC2_10G_XFI (0x1 << IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT)
 #define IXGBE_AUTOC2_10G_SFI (0x2 << IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT)
+#define IXGBE_AUTOC2_LINK_DISABLE_ON_D3_MASK  0x50000000
 #define IXGBE_AUTOC2_LINK_DISABLE_MASK        0x70000000
 
 #define IXGBE_MACC_FLU       0x00000001
@@ -2847,6 +2848,7 @@ struct ixgbe_mac_operations {
 	void (*disable_tx_laser)(struct ixgbe_hw *);
 	void (*enable_tx_laser)(struct ixgbe_hw *);
 	void (*flap_tx_laser)(struct ixgbe_hw *);
+	void (*stop_link_on_d3)(struct ixgbe_hw *);
 	s32 (*setup_link)(struct ixgbe_hw *, ixgbe_link_speed, bool);
 	s32 (*check_link)(struct ixgbe_hw *, ixgbe_link_speed *, bool *, bool);
 	s32 (*get_link_capabilities)(struct ixgbe_hw *, ixgbe_link_speed *,