From 39ec7e9b699910792468cf41a179d9930052e8ff Mon Sep 17 00:00:00 2001 From: Lubomir Rintel Date: Mon, 11 May 2020 23:01:32 +0200 Subject: ASoC: mmp-sspa: Set appropriate bus format for given bit width The values set by set_dai_fmt() and hw_params() seem to be tailored only for 32-bit formats. Negotiate the correct ones in hw_params() callback instead. This was essentially copied from the OLPC kernel driver and tested to fix wrong audio output for non-32bit formats. The documentation is not available. Signed-off-by: Lubomir Rintel Link: https://lore.kernel.org/r/20200511210134.1224532-10-lkundrak@v3.sk Signed-off-by: Mark Brown --- sound/soc/pxa/mmp-sspa.c | 40 ++++++++++++++++++++++++++++------------ sound/soc/pxa/mmp-sspa.h | 2 ++ 2 files changed, 30 insertions(+), 12 deletions(-) (limited to 'sound/soc/pxa') diff --git a/sound/soc/pxa/mmp-sspa.c b/sound/soc/pxa/mmp-sspa.c index 9cb17c4fb0c8..86277471974a 100644 --- a/sound/soc/pxa/mmp-sspa.c +++ b/sound/soc/pxa/mmp-sspa.c @@ -191,8 +191,6 @@ static int mmp_sspa_set_dai_fmt(struct snd_soc_dai *cpu_dai, switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { case SND_SOC_DAIFMT_I2S: - sspa->sp |= SSPA_TXSP_FPER(63); - sspa->sp |= SSPA_SP_FWID(31); sspa->ctrl |= SSPA_CTL_XDATDLY(1); break; default: @@ -216,30 +214,48 @@ static int mmp_sspa_hw_params(struct snd_pcm_substream *substream, { struct sspa_priv *sspa = snd_soc_dai_get_drvdata(dai); u32 sspa_ctrl = sspa->ctrl; - - sspa_ctrl &= ~SSPA_CTL_XFRLEN1_MASK; - sspa_ctrl |= SSPA_CTL_XFRLEN1(params_channels(params) - 1); - sspa_ctrl &= ~SSPA_CTL_XWDLEN1_MASK; - sspa_ctrl |= SSPA_CTL_XWDLEN1(SSPA_CTL_32_BITS); - sspa_ctrl &= ~SSPA_CTL_XSSZ1_MASK; + int bits; + int bitval; switch (params_format(params)) { case SNDRV_PCM_FORMAT_S8: - sspa_ctrl |= SSPA_CTL_XSSZ1(SSPA_CTL_8_BITS); + bits = 8; + bitval = SSPA_CTL_8_BITS; break; case SNDRV_PCM_FORMAT_S16_LE: - sspa_ctrl |= SSPA_CTL_XSSZ1(SSPA_CTL_16_BITS); + bits = 16; + bitval = SSPA_CTL_16_BITS; break; case SNDRV_PCM_FORMAT_S24_3LE: - sspa_ctrl |= SSPA_CTL_XSSZ1(SSPA_CTL_24_BITS); + bits = 24; + bitval = SSPA_CTL_24_BITS; break; case SNDRV_PCM_FORMAT_S32_LE: - sspa_ctrl |= SSPA_CTL_XSSZ1(SSPA_CTL_32_BITS); + bits = 32; + bitval = SSPA_CTL_32_BITS; break; default: return -EINVAL; } + if (params_channels(params) == 2) + sspa_ctrl |= SSPA_CTL_XPH; + + sspa_ctrl &= ~SSPA_CTL_XWDLEN1_MASK; + sspa_ctrl |= SSPA_CTL_XWDLEN1(bitval); + + sspa_ctrl &= ~SSPA_CTL_XSSZ1_MASK; + sspa_ctrl |= SSPA_CTL_XSSZ1(bitval); + + sspa_ctrl &= ~SSPA_CTL_XSSZ2_MASK; + sspa_ctrl |= SSPA_CTL_XSSZ2(bitval); + + sspa->sp &= ~SSPA_SP_FWID_MASK; + sspa->sp |= SSPA_SP_FWID(bits - 1); + + sspa->sp &= ~SSPA_TXSP_FPER_MASK; + sspa->sp |= SSPA_TXSP_FPER(bits * 2 - 1); + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { mmp_sspa_write_reg(sspa, SSPA_TXCTL, sspa_ctrl); mmp_sspa_write_reg(sspa, SSPA_TXFIFO_LL, 0x1); diff --git a/sound/soc/pxa/mmp-sspa.h b/sound/soc/pxa/mmp-sspa.h index 611063a7af68..328969b57ad1 100644 --- a/sound/soc/pxa/mmp-sspa.h +++ b/sound/soc/pxa/mmp-sspa.h @@ -63,7 +63,9 @@ #define SSPA_SP_FFLUSH (1 << 2) /* FIFO Flush */ #define SSPA_SP_S_RST (1 << 1) /* Active High Reset Signal */ #define SSPA_SP_S_EN (1 << 0) /* Serial Clock Domain Enable */ +#define SSPA_SP_FWID_MASK (0x3f << 20) #define SSPA_SP_FWID(x) ((x) << 20) /* Frame-Sync Width */ +#define SSPA_TXSP_FPER_MASK (0x3f << 4) #define SSPA_TXSP_FPER(x) ((x) << 4) /* Frame-Sync Active */ /* sspa clock sources */ -- cgit v1.2.3