summaryrefslogtreecommitdiff
path: root/net/ipv6
AgeCommit message (Collapse)AuthorFilesLines
2022-12-01net/tcp: Do cleanup on tcp_md5_key_copy() failureDmitry Safonov1-7/+8
If the kernel was short on (atomic) memory and failed to allocate it - don't proceed to creation of request socket. Otherwise the socket would be unsigned and userspace likely doesn't expect that the TCP is not MD5-signed anymore. Signed-off-by: Dmitry Safonov <dima@arista.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-01net/tcp: Disable TCP-MD5 static key on tcp_md5sig_info destructionDmitry Safonov1-6/+4
To do that, separate two scenarios: - where it's the first MD5 key on the system, which means that enabling of the static key may need to sleep; - copying of an existing key from a listening socket to the request socket upon receiving a signed TCP segment, where static key was already enabled (when the key was added to the listening socket). Now the life-time of the static branch for TCP-MD5 is until: - last tcp_md5sig_info is destroyed - last socket in time-wait state with MD5 key is closed. Which means that after all sockets with TCP-MD5 keys are gone, the system gets back the performance of disabled md5-key static branch. While at here, provide static_key_fast_inc() helper that does ref counter increment in atomic fashion (without grabbing cpus_read_lock() on CONFIG_JUMP_LABEL=y). This is needed to add a new user for a static_key when the caller controls the lifetime of another user. Signed-off-by: Dmitry Safonov <dima@arista.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-29Merge branch 'master' of ↵Jakub Kicinski1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== ipsec-next 2022-11-26 1) Remove redundant variable in esp6. From Colin Ian King. 2) Update x->lastused for every packet. It was used only for outgoing mobile IPv6 packets, but showed to be usefull to check if the a SA is still in use in general. From Antony Antony. 3) Remove unused variable in xfrm_byidx_resize. From Leon Romanovsky. 4) Finalize extack support for xfrm. From Sabrina Dubroca. * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next: xfrm: add extack to xfrm_set_spdinfo xfrm: add extack to xfrm_alloc_userspi xfrm: add extack to xfrm_do_migrate xfrm: add extack to xfrm_new_ae and xfrm_replay_verify_len xfrm: add extack to xfrm_del_sa xfrm: add extack to xfrm_add_sa_expire xfrm: a few coding style clean ups xfrm: Remove not-used total variable xfrm: update x->lastused for every packet esp6: remove redundant variable err ==================== Link: https://lore.kernel.org/r/20221126110303.1859238-1-steffen.klassert@secunet.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski3-17/+12
tools/lib/bpf/ringbuf.c 927cbb478adf ("libbpf: Handle size overflow for ringbuf mmap") b486d19a0ab0 ("libbpf: checkpatch: Fixed code alignments in ringbuf.c") https://lore.kernel.org/all/20221121122707.44d1446a@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-23Merge branch 'master' of ↵Jakub Kicinski2-1/+8
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== ipsec 2022-11-23 1) Fix "disable_policy" on ipv4 early demuxP Packets after the initial packet in a flow might be incorectly dropped on early demux if there are no matching policies. From Eyal Birger. 2) Fix a kernel warning in case XFRM encap type is not available. From Eyal Birger. 3) Fix ESN wrap around for GSO to avoid a double usage of a sequence number. From Christian Langrock. 4) Fix a send_acquire race with pfkey_register. From Herbert Xu. 5) Fix a list corruption panic in __xfrm_state_delete(). Thomas Jarosch. 6) Fix an unchecked return value in xfrm6_init(). Chen Zhongjin. * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec: xfrm: Fix ignored return value in xfrm6_init() xfrm: Fix oops in __xfrm_state_delete() af_key: Fix send_acquire race with pfkey_register xfrm: replay: Fix ESN wrap around for GSO xfrm: lwtunnel: squelch kernel warning in case XFRM encap type is not available xfrm: fix "disable_policy" on ipv4 early demux ==================== Link: https://lore.kernel.org/r/20221123093117.434274-1-steffen.klassert@secunet.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-22dccp/tcp: Fixup bhash2 bucket when connect() fails.Kuniyuki Iwashima1-2/+1
If a socket bound to a wildcard address fails to connect(), we only reset saddr and keep the port. Then, we have to fix up the bhash2 bucket; otherwise, the bucket has an inconsistent address in the list. Also, listen() for such a socket will fire the WARN_ON() in inet_csk_get_port(). [0] Note that when a system runs out of memory, we give up fixing the bucket and unlink sk from bhash and bhash2 by inet_put_port(). [0]: WARNING: CPU: 0 PID: 207 at net/ipv4/inet_connection_sock.c:548 inet_csk_get_port (net/ipv4/inet_connection_sock.c:548 (discriminator 1)) Modules linked in: CPU: 0 PID: 207 Comm: bhash2_prev_rep Not tainted 6.1.0-rc3-00799-gc8421681c845 #63 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.amzn2022.0.1 04/01/2014 RIP: 0010:inet_csk_get_port (net/ipv4/inet_connection_sock.c:548 (discriminator 1)) Code: 74 a7 eb 93 48 8b 54 24 18 0f b7 cb 4c 89 e6 4c 89 ff e8 48 b2 ff ff 49 8b 87 18 04 00 00 e9 32 ff ff ff 0f 0b e9 34 ff ff ff <0f> 0b e9 42 ff ff ff 41 8b 7f 50 41 8b 4f 54 89 fe 81 f6 00 00 ff RSP: 0018:ffffc900003d7e50 EFLAGS: 00010202 RAX: ffff8881047fb500 RBX: 0000000000004e20 RCX: 0000000000000000 RDX: 000000000000000a RSI: 00000000fffffe00 RDI: 00000000ffffffff RBP: ffffffff8324dc00 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000 R13: 0000000000000001 R14: 0000000000004e20 R15: ffff8881054e1280 FS: 00007f8ac04dc740(0000) GS:ffff88842fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020001540 CR3: 00000001055fa003 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> inet_csk_listen_start (net/ipv4/inet_connection_sock.c:1205) inet_listen (net/ipv4/af_inet.c:228) __sys_listen (net/socket.c:1810) __x64_sys_listen (net/socket.c:1819 net/socket.c:1817 net/socket.c:1817) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) RIP: 0033:0x7f8ac051de5d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 93 af 1b 00 f7 d8 64 89 01 48 RSP: 002b:00007ffc1c177248 EFLAGS: 00000206 ORIG_RAX: 0000000000000032 RAX: ffffffffffffffda RBX: 0000000020001550 RCX: 00007f8ac051de5d RDX: ffffffffffffff80 RSI: 0000000000000000 RDI: 0000000000000004 RBP: 00007ffc1c177270 R08: 0000000000000018 R09: 0000000000000007 R10: 0000000020001540 R11: 0000000000000206 R12: 00007ffc1c177388 R13: 0000000000401169 R14: 0000000000403e18 R15: 00007f8ac0723000 </TASK> Fixes: 28044fc1d495 ("net: Add a bhash2 table hashed by port and address") Reported-by: syzbot <syzkaller@googlegroups.com> Reported-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by: Joanne Koong <joannelkoong@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-22dccp/tcp: Update saddr under bhash's lock.Kuniyuki Iwashima1-16/+3
When we call connect() for a socket bound to a wildcard address, we update saddr locklessly. However, it could result in a data race; another thread iterating over bhash might see a corrupted address. Let's update saddr under the bhash bucket's lock. Fixes: 3df80d9320bc ("[DCCP]: Introduce DCCPv6") Fixes: 7c657876b63c ("[DCCP]: Initial implementation") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by: Joanne Koong <joannelkoong@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-22dccp/tcp: Reset saddr on failure after inet6?_hash_connect().Kuniyuki Iwashima1-0/+2
When connect() is called on a socket bound to the wildcard address, we change the socket's saddr to a local address. If the socket fails to connect() to the destination, we have to reset the saddr. However, when an error occurs after inet_hash6?_connect() in (dccp|tcp)_v[46]_conect(), we forget to reset saddr and leave the socket bound to the address. From the user's point of view, whether saddr is reset or not varies with errno. Let's fix this inconsistent behaviour. Note that after this patch, the repro [0] will trigger the WARN_ON() in inet_csk_get_port() again, but this patch is not buggy and rather fixes a bug papering over the bhash2's bug for which we need another fix. For the record, the repro causes -EADDRNOTAVAIL in inet_hash6_connect() by this sequence: s1 = socket() s1.setsockopt(SOL_SOCKET, SO_REUSEADDR, 1) s1.bind(('127.0.0.1', 10000)) s1.sendto(b'hello', MSG_FASTOPEN, (('127.0.0.1', 10000))) # or s1.connect(('127.0.0.1', 10000)) s2 = socket() s2.setsockopt(SOL_SOCKET, SO_REUSEADDR, 1) s2.bind(('0.0.0.0', 10000)) s2.connect(('127.0.0.1', 10000)) # -EADDRNOTAVAIL s2.listen(32) # WARN_ON(inet_csk(sk)->icsk_bind2_hash != tb2); [0]: https://syzkaller.appspot.com/bug?extid=015d756bbd1f8b5c8f09 Fixes: 3df80d9320bc ("[DCCP]: Introduce DCCPv6") Fixes: 7c657876b63c ("[DCCP]: Initial implementation") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by: Joanne Koong <joannelkoong@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-22xfrm: Fix ignored return value in xfrm6_init()Chen Zhongjin1-1/+5
When IPv6 module initializing in xfrm6_init(), register_pernet_subsys() is possible to fail but its return value is ignored. If IPv6 initialization fails later and xfrm6_fini() is called, removing uninitialized list in xfrm6_net_ops will cause null-ptr-deref: KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 1 PID: 330 Comm: insmod RIP: 0010:unregister_pernet_operations+0xc9/0x450 Call Trace: <TASK> unregister_pernet_subsys+0x31/0x3e xfrm6_fini+0x16/0x30 [ipv6] ip6_route_init+0xcd/0x128 [ipv6] inet6_init+0x29c/0x602 [ipv6] ... Fix it by catching the error return value of register_pernet_subsys(). Fixes: 8d068875caca ("xfrm: make gc_thresh configurable in all namespaces") Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-11-21net: Return errno in sk->sk_prot->get_port().Kuniyuki Iwashima1-2/+2
We assume the correct errno is -EADDRINUSE when sk->sk_prot->get_port() fails, so some ->get_port() functions return just 1 on failure and the callers return -EADDRINUSE instead. However, mptcp_get_port() can return -EINVAL. Let's not ignore the error. Note the only exception is inet_autobind(), all of whose callers return -EAGAIN instead. Fixes: cec37a6e41aa ("mptcp: Handle MP_CAPABLE options for outgoing connections") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-16ipv6: tunnels: use DEV_STATS_INC()Eric Dumazet4-35/+28
Most of code paths in tunnels are lockless (eg NETIF_F_LLTX in tx). Adopt SMP safe DEV_STATS_{INC|ADD}() to update dev->stats fields. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-16ipv6/sit: use DEV_STATS_INC() to avoid data-racesEric Dumazet1-11/+11
syzbot/KCSAN reported that multiple cpus are updating dev->stats.tx_error concurrently. This is because sit tunnels are NETIF_F_LLTX, meaning their ndo_start_xmit() is not protected by a spinlock. While original KCSAN report was about tx path, rx path has the same issue. Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-16ipv6: fib6_new_sernum() optimizationEric Dumazet1-4/+3
Adopt atomic_try_cmpxchg() which is slightly more efficient. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-16udp: Access &udp_table via net.Kuniyuki Iwashima2-10/+14
We will soon introduce an optional per-netns hash table for UDP. This means we cannot use udp_table directly in most places. Instead, access it via net->ipv4.udp_table. The access will be valid only while initialising udp_table itself and creating/destroying each netns. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-16udp: Set NULL to udp_seq_afinfo.udp_table.Kuniyuki Iwashima1-1/+1
We will soon introduce an optional per-netns hash table for UDP. This means we cannot use the global udp_seq_afinfo.udp_table to fetch a UDP hash table. Instead, set NULL to udp_seq_afinfo.udp_table for UDP and get a proper table from net->ipv4.udp_table. Note that we still need udp_seq_afinfo.udp_table for UDP LITE. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-16udp: Set NULL to sk->sk_prot->h.udp_table.Kuniyuki Iwashima1-1/+1
We will soon introduce an optional per-netns hash table for UDP. This means we cannot use the global sk->sk_prot->h.udp_table to fetch a UDP hash table. Instead, set NULL to sk->sk_prot->h.udp_table for UDP and get a proper table from net->ipv4.udp_table. Note that we still need sk->sk_prot->h.udp_table for UDP LITE. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-16udp: Clean up some functions.Kuniyuki Iwashima1-4/+8
This patch adds no functional change and cleans up some functions that the following patches touch around so that we make them tidy and easy to review/revert. The change is mainly to keep reverse christmas tree order. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-nextJakub Kicinski1-1/+2
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next 1) Fix sparse warning in the new nft_inner expression, reported by Jakub Kicinski. 2) Incorrect vlan header check in nft_inner, from Peng Wu. 3) Two patches to pass reset boolean to expression dump operation, in preparation for allowing to reset stateful expressions in rules. This adds a new NFT_MSG_GETRULE_RESET command. From Phil Sutter. 4) Inconsistent indentation in nft_fib, from Jiapeng Chong. 5) Speed up siphash calculation in conntrack, from Florian Westphal. * git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: conntrack: use siphash_4u64 netfilter: rpfilter/fib: clean up some inconsistent indenting netfilter: nf_tables: Introduce NFT_MSG_GETRULE_RESET netfilter: nf_tables: Extend nft_expr_ops::dump callback parameters netfilter: nft_inner: fix return value check in nft_inner_parse_l2l3() netfilter: nft_payload: use __be16 to store gre version ==================== Link: https://lore.kernel.org/r/20221115095922.139954-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-15netfilter: nf_tables: Extend nft_expr_ops::dump callback parametersPhil Sutter1-1/+2
Add a 'reset' flag just like with nft_object_ops::dump. This will be useful to reset "anonymous stateful objects", e.g. simple rule counters. No functional change intended. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-11-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+1
drivers/net/can/pch_can.c ae64438be192 ("can: dev: fix skb drop check") 1dd1b521be85 ("can: remove obsolete PCH CAN driver") https://lore.kernel.org/all/20221110102509.1f7d63cc@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-09Merge tag 'rxrpc-next-20221108' of ↵David S. Miller2-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs rxrpc changes David Howells says: ==================== rxrpc: Increasing SACK size and moving away from softirq, part 1 AF_RXRPC has some issues that need addressing: (1) The SACK table has a maximum capacity of 255, but for modern networks that isn't sufficient. This is hard to increase in the upstream code because of the way the application thread is coupled to the softirq and retransmission side through a ring buffer. Adjustments to the rx protocol allows a capacity of up to 8192, and having a ring sufficiently large to accommodate that would use an excessive amount of memory as this is per-call. (2) Processing ACKs in softirq mode causes the ACKs get conflated, with only the most recent being considered. Whilst this has the upside that the retransmission algorithm only needs to deal with the most recent ACK, it causes DATA transmission for a call to be very bursty because DATA packets cannot be transmitted in softirq mode. Rather transmission must be delegated to either the application thread or a workqueue, so there tend to be sudden bursts of traffic for any particular call due to scheduling delays. (3) All crypto in a single call is done in series; however, each DATA packet is individually encrypted so encryption and decryption of large calls could be parallelised if spare CPU resources are available. This is the first of a number of sets of patches that try and address them. The overall aims of these changes include: (1) To get rid of the TxRx ring and instead pass the packets round in queues (eg. sk_buff_head). On the Tx side, each ACK packet comes with a SACK table that can be parsed as-is, so there's no particular need to maintain our own; we just have to refer to the ACK. On the Rx side, we do need to maintain a SACK table with one bit per entry - but only if packets go missing - and we don't want to have to perform a complex transformation to get the information into an ACK packet. (2) To try and move almost all processing of received packets out of the softirq handler and into a high-priority kernel I/O thread. Only the transferral of packets would be left there. I would still use the encap_rcv hook to receive packets as there's a noticeable performance drop from letting the UDP socket put the packets into its own queue and then getting them out of there. (3) To make the I/O thread also do all the transmission. The app thread would be responsible for packaging the data into packets and then buffering them for the I/O thread to transmit. This would make it easier for the app thread to run ahead of the I/O thread, and would mean the I/O thread is less likely to have to wait around for a new packet to come available for transmission. (4) To logically partition the socket/UAPI/KAPI side of things from the I/O side of things. The local endpoint, connection, peer and call objects would belong to the I/O side. The socket side would not then touch the private internals of calls and suchlike and would not change their states. It would only look at the send queue, receive queue and a way to pass a message to cause an abort. (5) To remove as much locking, synchronisation, barriering and atomic ops as possible from the I/O side. Exclusion would be achieved by limiting modification of state to the I/O thread only. Locks would still need to be used in communication with the UDP socket and the AF_RXRPC socket API. (6) To provide crypto offload kernel threads that, when there's slack in the system, can see packets that need crypting and provide parallelisation in dealing with them. (7) To remove the use of system timers. Since each timer would then send a poke to the I/O thread, which would then deal with it when it had the opportunity, there seems no point in using system timers if, instead, a list of timeouts can be sensibly consulted. An I/O thread only then needs to schedule with a timeout when it is idle. (8) To use zero-copy sendmsg to send packets. This would make use of the I/O thread being the sole transmitter on the socket to manage the dead-reckoning sequencing of the completion notifications. There is a problem with zero-copy, though: the UDP socket doesn't handle running out of option memory very gracefully. With regard to this first patchset, the changes made include: (1) Some fixes, including a fallback for proc_create_net_single_write(), setting ack.bufferSize to 0 in ACK packets and a fix for rxrpc congestion management, which shouldn't be saving the cwnd value between calls. (2) Improvements in rxrpc tracepoints, including splitting the timer tracepoint into a set-timer and a timer-expired trace. (3) Addition of a new proc file to display some stats. (4) Some code cleanups, including removing some unused bits and unnecessary header inclusions. (5) A change to the recently added UDP encap_err_rcv hook so that it has the same signature as {ip,ipv6}_icmp_error(), and then just have rxrpc point its UDP socket's hook directly at those. (6) Definition of a new struct, rxrpc_txbuf, that is used to hold transmissible packets of DATA and ACK type in a single 2KiB block rather than using an sk_buff. This allows the buffer to be on a number of queues simultaneously more easily, and also guarantees that the entire block is in a single unit for zerocopy purposes and that the data payload is aligned for in-place crypto purposes. (7) ACK txbufs are allocated at proposal and queued for later transmission rather than being stored in a single place in the rxrpc_call struct, which means only a single ACK can be pending transmission at a time. The queue is then drained at various points. This allows the ACK generation code to be simplified. (8) The Rx ring buffer is removed. When a jumbo packet is received (which comprises a number of ordinary DATA packets glued together), it used to be pointed to by the ring multiple times, with an annotation in a side ring indicating which subpacket was in that slot - but this is no longer possible. Instead, the packet is cloned once for each subpacket, barring the last, and the range of data is set in the skb private area. This makes it easier for the subpackets in a jumbo packet to be decrypted in parallel. (9) The Tx ring buffer is removed. The side annotation ring that held the SACK information is also removed. Instead, in the event of packet loss, the SACK data attached an ACK packet is parsed. (10) Allocate an skcipher request when needed in the rxkad security class rather than caching one in the rxrpc_call struct. This deals with a race between externally-driven call disconnection getting rid of the skcipher request and sendmsg/recvmsg trying to use it because they haven't seen the completion yet. This is also needed to support parallelisation as the skcipher request cannot be used by two or more threads simultaneously. (11) Call udp_sendmsg() and udpv6_sendmsg() directly rather than going through kernel_sendmsg() so that we can provide our own iterator (zerocopy explicitly doesn't work with a KVEC iterator). This also lets us avoid the overhead of the security hook. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-08rxrpc: Call udp_sendmsg() directlyDavid Howells1-0/+1
Call udp_sendmsg() and udpv6_sendmsg() directly rather than calling kernel_sendmsg() as the latter assumes we want a kvec-class iterator. However, zerocopy explicitly doesn't work with such an iterator. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org
2022-11-08net: Change the udp encap_err_rcv to allow use of {ip,ipv6}_icmp_error()David Howells2-1/+3
Change the udp encap_err_rcv signature to match ip_icmp_error() and ipv6_icmp_error() so that those can be used from the called function and export them. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: netdev@vger.kernel.org
2022-11-07ipv6: addrlabel: fix infoleak when sending struct ifaddrlblmsg to networkAlexander Potapenko1-0/+1
When copying a `struct ifaddrlblmsg` to the network, __ifal_reserved remained uninitialized, resulting in a 1-byte infoleak: BUG: KMSAN: kernel-network-infoleak in __netdev_start_xmit ./include/linux/netdevice.h:4841 __netdev_start_xmit ./include/linux/netdevice.h:4841 netdev_start_xmit ./include/linux/netdevice.h:4857 xmit_one net/core/dev.c:3590 dev_hard_start_xmit+0x1dc/0x800 net/core/dev.c:3606 __dev_queue_xmit+0x17e8/0x4350 net/core/dev.c:4256 dev_queue_xmit ./include/linux/netdevice.h:3009 __netlink_deliver_tap_skb net/netlink/af_netlink.c:307 __netlink_deliver_tap+0x728/0xad0 net/netlink/af_netlink.c:325 netlink_deliver_tap net/netlink/af_netlink.c:338 __netlink_sendskb net/netlink/af_netlink.c:1263 netlink_sendskb+0x1d9/0x200 net/netlink/af_netlink.c:1272 netlink_unicast+0x56d/0xf50 net/netlink/af_netlink.c:1360 nlmsg_unicast ./include/net/netlink.h:1061 rtnl_unicast+0x5a/0x80 net/core/rtnetlink.c:758 ip6addrlbl_get+0xfad/0x10f0 net/ipv6/addrlabel.c:628 rtnetlink_rcv_msg+0xb33/0x1570 net/core/rtnetlink.c:6082 ... Uninit was created at: slab_post_alloc_hook+0x118/0xb00 mm/slab.h:742 slab_alloc_node mm/slub.c:3398 __kmem_cache_alloc_node+0x4f2/0x930 mm/slub.c:3437 __do_kmalloc_node mm/slab_common.c:954 __kmalloc_node_track_caller+0x117/0x3d0 mm/slab_common.c:975 kmalloc_reserve net/core/skbuff.c:437 __alloc_skb+0x27a/0xab0 net/core/skbuff.c:509 alloc_skb ./include/linux/skbuff.h:1267 nlmsg_new ./include/net/netlink.h:964 ip6addrlbl_get+0x490/0x10f0 net/ipv6/addrlabel.c:608 rtnetlink_rcv_msg+0xb33/0x1570 net/core/rtnetlink.c:6082 netlink_rcv_skb+0x299/0x550 net/netlink/af_netlink.c:2540 rtnetlink_rcv+0x26/0x30 net/core/rtnetlink.c:6109 netlink_unicast_kernel net/netlink/af_netlink.c:1319 netlink_unicast+0x9ab/0xf50 net/netlink/af_netlink.c:1345 netlink_sendmsg+0xebc/0x10f0 net/netlink/af_netlink.c:1921 ... This patch ensures that the reserved field is always initialized. Reported-by: syzbot+3553517af6020c4f2813f1003fe76ef3cbffe98d@syzkaller.appspotmail.com Fixes: 2a8cc6c89039 ("[IPV6] ADDRCONF: Support RFC3484 configurable address selection policy table.") Signed-off-by: Alexander Potapenko <glider@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-4/+11
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-02ipv6: fix WARNING in ip6_route_net_exit_late()Zhengchao Shao1-4/+10
During the initialization of ip6_route_net_init_late(), if file ipv6_route or rt6_stats fails to be created, the initialization is successful by default. Therefore, the ipv6_route or rt6_stats file doesn't be found during the remove in ip6_route_net_exit_late(). It will cause WRNING. The following is the stack information: name 'rt6_stats' WARNING: CPU: 0 PID: 9 at fs/proc/generic.c:712 remove_proc_entry+0x389/0x460 Modules linked in: Workqueue: netns cleanup_net RIP: 0010:remove_proc_entry+0x389/0x460 PKRU: 55555554 Call Trace: <TASK> ops_exit_list+0xb0/0x170 cleanup_net+0x4ea/0xb00 process_one_work+0x9bf/0x1710 worker_thread+0x665/0x1080 kthread+0x2e4/0x3a0 ret_from_fork+0x1f/0x30 </TASK> Fixes: cdb1876192db ("[NETNS][IPV6] route6 - create route6 proc files for the namespace") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20221102020610.351330-1-shaozhengchao@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-31net: dropreason: add SKB_DROP_REASON_DUP_FRAGEric Dumazet2-5/+10
This is used to track when a duplicate segment received by various reassembly units is dropped. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-28udp: advertise ipv6 udp support for msghdr::ubuf_infoPavel Begunkov1-0/+1
Mark udp ipv6 as supporting msghdr::ubuf_info. In the original commit SOCK_SUPPORT_ZC was supposed to be set by a udp_init_sock() call from udp6_init_sock(), but d38afeec26ed4 ("tcp/udp: Call inet6_destroy_sock() in IPv6 ...") removed it and so ipv6 udp misses the flag. Cc: <stable@vger.kernel.org> # 6.0 Fixes: e993ffe3da4bc ("net: flag sockets supporting msghdr originated zerocopy") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-28net: Remove the obsolte u64_stats_fetch_*_irq() users (net).Thomas Gleixner1-2/+2
Now that the 32bit UP oddity is gone and 32bit uses always a sequence count, there is no need for the fetch_irq() variants anymore. Convert to the regular interface. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski3-13/+18
drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c 2871edb32f46 ("can: kvaser_usb: Fix possible completions during init_completion") abb8670938b2 ("can: kvaser_usb_leaf: Ignore stale bus-off after start") 8d21f5927ae6 ("can: kvaser_usb_leaf: Fix improved state not being reported") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-25ipv6: ensure sane device mtu in tunnelsEric Dumazet3-13/+18
Another syzbot report [1] with no reproducer hints at a bug in ip6_gre tunnel (dev:ip6gretap0) Since ipv6 mcast code makes sure to read dev->mtu once and applies a sanity check on it (see commit b9b312a7a451 "ipv6: mcast: better catch silly mtu values"), a remaining possibility is that a layer is able to set dev->mtu to an underflowed value (high order bit set). This could happen indeed in ip6gre_tnl_link_config_route(), ip6_tnl_link_config() and ipip6_tunnel_bind_dev() Make sure to sanitize mtu value in a local variable before it is written once on dev->mtu, as lockless readers could catch wrong temporary value. [1] skbuff: skb_over_panic: text:ffff80000b7a2f38 len:40 put:40 head:ffff000149dcf200 data:ffff000149dcf2b0 tail:0xd8 end:0xc0 dev:ip6gretap0 ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:120 Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 1 PID: 10241 Comm: kworker/1:1 Not tainted 6.0.0-rc7-syzkaller-18095-gbbed346d5a96 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/30/2022 Workqueue: mld mld_ifc_work pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : skb_panic+0x4c/0x50 net/core/skbuff.c:116 lr : skb_panic+0x4c/0x50 net/core/skbuff.c:116 sp : ffff800020dd3b60 x29: ffff800020dd3b70 x28: 0000000000000000 x27: ffff00010df2a800 x26: 00000000000000c0 x25: 00000000000000b0 x24: ffff000149dcf200 x23: 00000000000000c0 x22: 00000000000000d8 x21: ffff80000b7a2f38 x20: ffff00014c2f7800 x19: 0000000000000028 x18: 00000000000001a9 x17: 0000000000000000 x16: ffff80000db49158 x15: ffff000113bf1a80 x14: 0000000000000000 x13: 00000000ffffffff x12: ffff000113bf1a80 x11: ff808000081c0d5c x10: 0000000000000000 x9 : 73f125dc5c63ba00 x8 : 73f125dc5c63ba00 x7 : ffff800008161d1c x6 : 0000000000000000 x5 : 0000000000000080 x4 : 0000000000000001 x3 : 0000000000000000 x2 : ffff0001fefddcd0 x1 : 0000000100000000 x0 : 0000000000000089 Call trace: skb_panic+0x4c/0x50 net/core/skbuff.c:116 skb_over_panic net/core/skbuff.c:125 [inline] skb_put+0xd4/0xdc net/core/skbuff.c:2049 ip6_mc_hdr net/ipv6/mcast.c:1714 [inline] mld_newpack+0x14c/0x270 net/ipv6/mcast.c:1765 add_grhead net/ipv6/mcast.c:1851 [inline] add_grec+0xa20/0xae0 net/ipv6/mcast.c:1989 mld_send_cr+0x438/0x5a8 net/ipv6/mcast.c:2115 mld_ifc_work+0x38/0x290 net/ipv6/mcast.c:2653 process_one_work+0x2d8/0x504 kernel/workqueue.c:2289 worker_thread+0x340/0x610 kernel/workqueue.c:2436 kthread+0x12c/0x158 kernel/kthread.c:376 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860 Code: 91011400 aa0803e1 a90027ea 94373093 (d4210000) Fixes: c12b395a4664 ("gre: Support GRE over IPv6") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20221024020124.3756833-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-24net: remove useless parameter of __sock_cmsg_sendxu xin1-1/+1
The parameter 'msg' has never been used by __sock_cmsg_send, so we can remove it safely. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: xu xin <xu.xin16@zte.com.cn> Reviewed-by: Zhang Yunkai <zhang.yunkai@zte.com.cn> Acked-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-24udp: track the forward memory release threshold in an hot cachelinePaolo Abeni1-2/+2
When the receiver process and the BH runs on different cores, udp_rmem_release() experience a cache miss while accessing sk_rcvbuf, as the latter shares the same cacheline with sk_forward_alloc, written by the BH. With this patch, UDP tracks the rcvbuf value and its update via custom SOL_SOCKET socket options, and copies the forward memory threshold value used by udp_rmem_release() in a different cacheline, already accessed by the above function and uncontended. Since the UDP socket init operation grown a bit, factor out the common code between v4 and v6 in a shared helper. Overall the above give a 10% peek throughput increase under UDP flood. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-24inet6: Clean up failure path in do_ipv6_setsockopt().Kuniyuki Iwashima1-4/+2
We can reuse the unlock label above and need not repeat the same code. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-24inet6: Remove inet6_destroy_sock().Kuniyuki Iwashima1-7/+1
The last user of inet6_destroy_sock() is its wrapper inet6_cleanup_sock(). Let's rename inet6_destroy_sock() to inet6_cleanup_sock(). Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-24dccp: Call inet6_destroy_sock() via sk->sk_destruct().Kuniyuki Iwashima1-0/+1
After commit d38afeec26ed ("tcp/udp: Call inet6_destroy_sock() in IPv6 sk->sk_destruct()."), we call inet6_destroy_sock() in sk->sk_destruct() by setting inet6_sock_destruct() to it to make sure we do not leak inet6-specific resources. DCCP sets its own sk->sk_destruct() in the dccp_init_sock(), and DCCPv6 socket shares it by calling the same init function via dccp_v6_init_sock(). To call inet6_sock_destruct() from DCCPv6 sk->sk_destruct(), we export it and set dccp_v6_sk_destruct() in the init function. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-24inet6: Remove inet6_destroy_sock() in sk->sk_prot->destroy().Kuniyuki Iwashima4-17/+1
After commit d38afeec26ed ("tcp/udp: Call inet6_destroy_sock() in IPv6 sk->sk_destruct()."), we call inet6_destroy_sock() in sk->sk_destruct() by setting inet6_sock_destruct() to it to make sure we do not leak inet6-specific resources. Now we can remove unnecessary inet6_destroy_sock() calls in sk->sk_prot->destroy(). DCCP and SCTP have their own sk->sk_destruct() function, so we change them separately in the following patches. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski8-13/+18
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-20Merge tag 'net-6.1-rc2' of ↵Linus Torvalds5-2/+7
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from netfilter. Current release - regressions: - revert "net: fix cpu_max_bits_warn() usage in netif_attrmask_next{,_and}" - revert "net: sched: fq_codel: remove redundant resource cleanup in fq_codel_init()" - dsa: uninitialized variable in dsa_slave_netdevice_event() - eth: sunhme: uninitialized variable in happy_meal_init() Current release - new code bugs: - eth: octeontx2: fix resource not freed after malloc Previous releases - regressions: - sched: fix return value of qdisc ingress handling on success - sched: fix race condition in qdisc_graft() - udp: update reuse->has_conns under reuseport_lock. - tls: strp: make sure the TCP skbs do not have overlapping data - hsr: avoid possible NULL deref in skb_clone() - tipc: fix an information leak in tipc_topsrv_kern_subscr - phylink: add mac_managed_pm in phylink_config structure - eth: i40e: fix DMA mappings leak - eth: hyperv: fix a RX-path warning - eth: mtk: fix memory leaks Previous releases - always broken: - sched: cake: fix null pointer access issue when cake_init() fails" * tag 'net-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (43 commits) net: phy: dp83822: disable MDI crossover status change interrupt net: sched: fix race condition in qdisc_graft() net: hns: fix possible memory leak in hnae_ae_register() wwan_hwsim: fix possible memory leak in wwan_hwsim_dev_new() sfc: include vport_id in filter spec hash and equal() genetlink: fix kdoc warnings selftests: add selftest for chaining of tc ingress handling to egress net: Fix return value of qdisc ingress handling on success net: sched: sfb: fix null pointer access issue when sfb_init() fails Revert "net: sched: fq_codel: remove redundant resource cleanup in fq_codel_init()" net: sched: cake: fix null pointer access issue when cake_init() fails ethernet: marvell: octeontx2 Fix resource not freed after malloc netfilter: nf_tables: relax NFTA_SET_ELEM_KEY_END set flags requirements netfilter: rpfilter/fib: Set ->flowic_uid correctly for user namespaces. ionic: catch NULL pointer issue on reconfig net: hsr: avoid possible NULL deref in skb_clone() bnxt_en: fix memory leak in bnxt_nvm_test() ip6mr: fix UAF issue in ip6mr_sk_done() when addrconf_init_net() failed udp: Update reuse->has_conns under reuseport_lock. net: ethernet: mediatek: ppe: Remove the unused function mtk_foe_entry_usable() ...
2022-10-19esp6: remove redundant variable errColin Ian King1-2/+1
Variable err is being assigned a value that is not read, the assignment is redundant and so is the variable. Remove it. Cleans up clang scan warning: net/ipv6/esp6_offload.c:64:7: warning: Although the value stored to 'err' is used in the enclosing expression, the value is never actually read from 'err' [deadcode.DeadStores] Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-10-19xfrm: replay: Fix ESN wrap around for GSOChristian Langrock1-0/+3
When using GSO it can happen that the wrong seq_hi is used for the last packets before the wrap around. This can lead to double usage of a sequence number. To avoid this, we should serialize this last GSO packet. Fixes: d7dbefc45cf5 ("xfrm: Add xfrm_replay_overflow functions for offloading") Co-developed-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Christian Langrock <christian.langrock@secunet.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-10-19netfilter: rpfilter/fib: Set ->flowic_uid correctly for user namespaces.Guillaume Nault2-0/+3
Currently netfilter's rpfilter and fib modules implicitely initialise ->flowic_uid with 0. This is normally the root UID. However, this isn't the case in user namespaces, where user ID 0 is mapped to a different kernel UID. By initialising ->flowic_uid with sock_net_uid(), we get the root UID of the user namespace, thus keeping the same behaviour whether or not we're running in a user namepspace. Note, this is similar to commit 8bcfd0925ef1 ("ipv4: add missing initialization for flowi4_uid"), which fixed the rp_filter sysctl. Fixes: 622ec2c9d524 ("net: core: add UID to flows, rules, and routes") Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-10-18net: ip6_gre: Remove the unused function ip6gre_tnl_addr_conflict()Jiapeng Chong1-20/+0
The function ip6gre_tnl_addr_conflict() is defined in the ip6_gre.c file, but not called elsewhere, so delete this unused function. net/ipv6/ip6_gre.c:887:20: warning: unused function 'ip6gre_tnl_addr_conflict'. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2419 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Link: https://lore.kernel.org/r/20221017093540.26806-1-jiapeng.chong@linux.alibaba.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-10-18ip6mr: fix UAF issue in ip6mr_sk_done() when addrconf_init_net() failedZhengchao Shao1-0/+2
If the initialization fails in calling addrconf_init_net(), devconf_all is the pointer that has been released. Then ip6mr_sk_done() is called to release the net, accessing devconf->mc_forwarding directly causes invalid pointer access. The process is as follows: setup_net() ops_init() addrconf_init_net() all = kmemdup(...) ---> alloc "all" ... net->ipv6.devconf_all = all; __addrconf_sysctl_register() ---> failed ... kfree(all); ---> ipv6.devconf_all invalid ... ops_exit_list() ... ip6mr_sk_done() devconf = net->ipv6.devconf_all; //devconf is invalid pointer if (!devconf || !atomic_read(&devconf->mc_forwarding)) The following is the Call Trace information: BUG: KASAN: use-after-free in ip6mr_sk_done+0x112/0x3a0 Read of size 4 at addr ffff888075508e88 by task ip/14554 Call Trace: <TASK> dump_stack_lvl+0x8e/0xd1 print_report+0x155/0x454 kasan_report+0xba/0x1f0 kasan_check_range+0x35/0x1b0 ip6mr_sk_done+0x112/0x3a0 rawv6_close+0x48/0x70 inet_release+0x109/0x230 inet6_release+0x4c/0x70 sock_release+0x87/0x1b0 igmp6_net_exit+0x6b/0x170 ops_exit_list+0xb0/0x170 setup_net+0x7ac/0xbd0 copy_net_ns+0x2e6/0x6b0 create_new_namespaces+0x382/0xa50 unshare_nsproxy_namespaces+0xa6/0x1c0 ksys_unshare+0x3a4/0x7e0 __x64_sys_unshare+0x2d/0x40 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f7963322547 </TASK> Allocated by task 14554: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 __kasan_kmalloc+0xa1/0xb0 __kmalloc_node_track_caller+0x4a/0xb0 kmemdup+0x28/0x60 addrconf_init_net+0x1be/0x840 ops_init+0xa5/0x410 setup_net+0x5aa/0xbd0 copy_net_ns+0x2e6/0x6b0 create_new_namespaces+0x382/0xa50 unshare_nsproxy_namespaces+0xa6/0x1c0 ksys_unshare+0x3a4/0x7e0 __x64_sys_unshare+0x2d/0x40 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Freed by task 14554: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_save_free_info+0x2a/0x40 ____kasan_slab_free+0x155/0x1b0 slab_free_freelist_hook+0x11b/0x220 __kmem_cache_free+0xa4/0x360 addrconf_init_net+0x623/0x840 ops_init+0xa5/0x410 setup_net+0x5aa/0xbd0 copy_net_ns+0x2e6/0x6b0 create_new_namespaces+0x382/0xa50 unshare_nsproxy_namespaces+0xa6/0x1c0 ksys_unshare+0x3a4/0x7e0 __x64_sys_unshare+0x2d/0x40 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Fixes: 7d9b1b578d67 ("ip6mr: fix use-after-free in ip6mr_sk_done()") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20221017080331.16878-1-shaozhengchao@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-10-18udp: Update reuse->has_conns under reuseport_lock.Kuniyuki Iwashima2-2/+2
When we call connect() for a UDP socket in a reuseport group, we have to update sk->sk_reuseport_cb->has_conns to 1. Otherwise, the kernel could select a unconnected socket wrongly for packets sent to the connected socket. However, the current way to set has_conns is illegal and possible to trigger that problem. reuseport_has_conns() changes has_conns under rcu_read_lock(), which upgrades the RCU reader to the updater. Then, it must do the update under the updater's lock, reuseport_lock, but it doesn't for now. For this reason, there is a race below where we fail to set has_conns resulting in the wrong socket selection. To avoid the race, let's split the reader and updater with proper locking. cpu1 cpu2 +----+ +----+ __ip[46]_datagram_connect() reuseport_grow() . . |- reuseport_has_conns(sk, true) |- more_reuse = __reuseport_alloc(more_socks_size) | . | | |- rcu_read_lock() | |- reuse = rcu_dereference(sk->sk_reuseport_cb) | | | | | /* reuse->has_conns == 0 here */ | | |- more_reuse->has_conns = reuse->has_conns | |- reuse->has_conns = 1 | /* more_reuse->has_conns SHOULD BE 1 HERE */ | | | | | |- rcu_assign_pointer(reuse->socks[i]->sk_reuseport_cb, | | | more_reuse) | `- rcu_read_unlock() `- kfree_rcu(reuse, rcu) | |- sk->sk_state = TCP_ESTABLISHED Note the likely(reuse) in reuseport_has_conns_set() is always true, but we put the test there for ease of review. [0] For the record, usually, sk_reuseport_cb is changed under lock_sock(). The only exception is reuseport_grow() & TCP reqsk migration case. 1) shutdown() TCP listener, which is moved into the latter part of reuse->socks[] to migrate reqsk. 2) New listen() overflows reuse->socks[] and call reuseport_grow(). 3) reuse->max_socks overflows u16 with the new listener. 4) reuseport_grow() pops the old shutdown()ed listener from the array and update its sk->sk_reuseport_cb as NULL without lock_sock(). shutdown()ed TCP sk->sk_reuseport_cb can be changed without lock_sock(), but, reuseport_has_conns_set() is called only for UDP under lock_sock(), so likely(reuse) never be false in reuseport_has_conns_set(). [0]: https://lore.kernel.org/netdev/CANn89iLja=eQHbsM_Ta2sQF0tOGU8vAGrh_izRuuHjuO1ouUag@mail.gmail.com/ Fixes: acdcecc61285 ("udp: correct reuseport selection with connected sockets") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20221014182625.89913-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-10-16Merge tag 'random-6.1-rc1-for-linus' of ↵Linus Torvalds4-11/+11
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random Pull more random number generator updates from Jason Donenfeld: "This time with some large scale treewide cleanups. The intent of this pull is to clean up the way callers fetch random integers. The current rules for doing this right are: - If you want a secure or an insecure random u64, use get_random_u64() - If you want a secure or an insecure random u32, use get_random_u32() The old function prandom_u32() has been deprecated for a while now and is just a wrapper around get_random_u32(). Same for get_random_int(). - If you want a secure or an insecure random u16, use get_random_u16() - If you want a secure or an insecure random u8, use get_random_u8() - If you want secure or insecure random bytes, use get_random_bytes(). The old function prandom_bytes() has been deprecated for a while now and has long been a wrapper around get_random_bytes() - If you want a non-uniform random u32, u16, or u8 bounded by a certain open interval maximum, use prandom_u32_max() I say "non-uniform", because it doesn't do any rejection sampling or divisions. Hence, it stays within the prandom_*() namespace, not the get_random_*() namespace. I'm currently investigating a "uniform" function for 6.2. We'll see what comes of that. By applying these rules uniformly, we get several benefits: - By using prandom_u32_max() with an upper-bound that the compiler can prove at compile-time is ≤65536 or ≤256, internally get_random_u16() or get_random_u8() is used, which wastes fewer batched random bytes, and hence has higher throughput. - By using prandom_u32_max() instead of %, when the upper-bound is not a constant, division is still avoided, because prandom_u32_max() uses a faster multiplication-based trick instead. - By using get_random_u16() or get_random_u8() in cases where the return value is intended to indeed be a u16 or a u8, we waste fewer batched random bytes, and hence have higher throughput. This series was originally done by hand while I was on an airplane without Internet. Later, Kees and I worked on retroactively figuring out what could be done with Coccinelle and what had to be done manually, and then we split things up based on that. So while this touches a lot of files, the actual amount of code that's hand fiddled is comfortably small" * tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: prandom: remove unused functions treewide: use get_random_bytes() when possible treewide: use get_random_u32() when possible treewide: use get_random_{u8,u16}() when possible, part 2 treewide: use get_random_{u8,u16}() when possible, part 1 treewide: use prandom_u32_max() when possible, part 2 treewide: use prandom_u32_max() when possible, part 1
2022-10-12tcp: Fix data races around icsk->icsk_af_ops.Kuniyuki Iwashima2-3/+6
setsockopt(IPV6_ADDRFORM) and tcp_v6_connect() change icsk->icsk_af_ops under lock_sock(), but tcp_(get|set)sockopt() read it locklessly. To avoid load/store tearing, we need to add READ_ONCE() and WRITE_ONCE() for the reads and writes. Thanks to Eric Dumazet for providing the syzbot report: BUG: KCSAN: data-race in tcp_setsockopt / tcp_v6_connect write to 0xffff88813c624518 of 8 bytes by task 23936 on cpu 0: tcp_v6_connect+0x5b3/0xce0 net/ipv6/tcp_ipv6.c:240 __inet_stream_connect+0x159/0x6d0 net/ipv4/af_inet.c:660 inet_stream_connect+0x44/0x70 net/ipv4/af_inet.c:724 __sys_connect_file net/socket.c:1976 [inline] __sys_connect+0x197/0x1b0 net/socket.c:1993 __do_sys_connect net/socket.c:2003 [inline] __se_sys_connect net/socket.c:2000 [inline] __x64_sys_connect+0x3d/0x50 net/socket.c:2000 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd read to 0xffff88813c624518 of 8 bytes by task 23937 on cpu 1: tcp_setsockopt+0x147/0x1c80 net/ipv4/tcp.c:3789 sock_common_setsockopt+0x5d/0x70 net/core/sock.c:3585 __sys_setsockopt+0x212/0x2b0 net/socket.c:2252 __do_sys_setsockopt net/socket.c:2263 [inline] __se_sys_setsockopt net/socket.c:2260 [inline] __x64_sys_setsockopt+0x62/0x70 net/socket.c:2260 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0xffffffff8539af68 -> 0xffffffff8539aff8 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 23937 Comm: syz-executor.5 Not tainted 6.0.0-rc4-syzkaller-00331-g4ed9c1e971b1-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/26/2022 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot <syzkaller@googlegroups.com> Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-12ipv6: Fix data races around sk->sk_prot.Kuniyuki Iwashima1-2/+2
Commit 086d49058cd8 ("ipv6: annotate some data-races around sk->sk_prot") fixed some data-races around sk->sk_prot but it was not enough. Some functions in inet6_(stream|dgram)_ops still access sk->sk_prot without lock_sock() or rtnl_lock(), so they need READ_ONCE() to avoid load tearing. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-12tcp/udp: Call inet6_destroy_sock() in IPv6 sk->sk_destruct().Kuniyuki Iwashima4-3/+30
Originally, inet6_sk(sk)->XXX were changed under lock_sock(), so we were able to clean them up by calling inet6_destroy_sock() during the IPv6 -> IPv4 conversion by IPV6_ADDRFORM. However, commit 03485f2adcde ("udpv6: Add lockless sendmsg() support") added a lockless memory allocation path, which could cause a memory leak: setsockopt(IPV6_ADDRFORM) sendmsg() +-----------------------+ +-------+ - do_ipv6_setsockopt(sk, ...) - udpv6_sendmsg(sk, ...) - sockopt_lock_sock(sk) ^._ called via udpv6_prot - lock_sock(sk) before WRITE_ONCE() - WRITE_ONCE(sk->sk_prot, &tcp_prot) - inet6_destroy_sock() - if (!corkreq) - sockopt_release_sock(sk) - ip6_make_skb(sk, ...) - release_sock(sk) ^._ lockless fast path for the non-corking case - __ip6_append_data(sk, ...) - ipv6_local_rxpmtu(sk, ...) - xchg(&np->rxpmtu, skb) ^._ rxpmtu is never freed. - goto out_no_dst; - lock_sock(sk) For now, rxpmtu is only the case, but not to miss the future change and a similar bug fixed in commit e27326009a3d ("net: ping6: Fix memleak in ipv6_renew_options()."), let's set a new function to IPv6 sk->sk_destruct() and call inet6_cleanup_sock() there. Since the conversion does not change sk->sk_destruct(), we can guarantee that we can clean up IPv6 resources finally. We can now remove all inet6_destroy_sock() calls from IPv6 protocol specific ->destroy() functions, but such changes are invasive to backport. So they can be posted as a follow-up later for net-next. Fixes: 03485f2adcde ("udpv6: Add lockless sendmsg() support") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-12udp: Call inet6_destroy_sock() in setsockopt(IPV6_ADDRFORM).Kuniyuki Iwashima2-12/+14
Commit 4b340ae20d0e ("IPv6: Complete IPV6_DONTFRAG support") forgot to add a change to free inet6_sk(sk)->rxpmtu while converting an IPv6 socket into IPv4 with IPV6_ADDRFORM. After conversion, sk_prot is changed to udp_prot and ->destroy() never cleans it up, resulting in a memory leak. This is due to the discrepancy between inet6_destroy_sock() and IPV6_ADDRFORM, so let's call inet6_destroy_sock() from IPV6_ADDRFORM to remove the difference. However, this is not enough for now because rxpmtu can be changed without lock_sock() after commit 03485f2adcde ("udpv6: Add lockless sendmsg() support"). We will fix this case in the following patch. Note we will rename inet6_destroy_sock() to inet6_cleanup_sock() and remove unnecessary inet6_destroy_sock() calls in sk_prot->destroy() in the future. Fixes: 4b340ae20d0e ("IPv6: Complete IPV6_DONTFRAG support") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>