summaryrefslogtreecommitdiff
path: root/net/ethtool
AgeCommit message (Collapse)AuthorFilesLines
2023-04-04ethtool: reset #lanes when lanes is omittedAndy Roulin1-3/+4
If the number of lanes was forced and then subsequently the user omits this parameter, the ksettings->lanes is reset. The driver should then reset the number of lanes to the device's default for the specified speed. However, although the ksettings->lanes is set to 0, the mod variable is not set to true to indicate the driver and userspace should be notified of the changes. The consequence is that the same ethtool operation will produce different results based on the initial state. If the initial state is: $ ethtool swp1 | grep -A 3 'Speed: ' Speed: 500000Mb/s Lanes: 2 Duplex: Full Auto-negotiation: on then executing 'ethtool -s swp1 speed 50000 autoneg off' will yield: $ ethtool swp1 | grep -A 3 'Speed: ' Speed: 500000Mb/s Lanes: 2 Duplex: Full Auto-negotiation: off While if the initial state is: $ ethtool swp1 | grep -A 3 'Speed: ' Speed: 500000Mb/s Lanes: 1 Duplex: Full Auto-negotiation: off executing the same 'ethtool -s swp1 speed 50000 autoneg off' results in: $ ethtool swp1 | grep -A 3 'Speed: ' Speed: 500000Mb/s Lanes: 1 Duplex: Full Auto-negotiation: off This patch fixes this behavior. Omitting lanes will always results in the driver choosing the default lane width for the chosen speed. In this scenario, regardless of the initial state, the end state will be, e.g., $ ethtool swp1 | grep -A 3 'Speed: ' Speed: 500000Mb/s Lanes: 2 Duplex: Full Auto-negotiation: off Fixes: 012ce4dd3102 ("ethtool: Extend link modes settings uAPI with lanes") Signed-off-by: Andy Roulin <aroulin@nvidia.com> Reviewed-by: Danielle Ratson <danieller@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/ac238d6b-8726-8156-3810-6471291dbc7f@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-21net: ethtool: fix __ethtool_dev_mm_supported() implementationVladimir Oltean1-1/+1
The MAC Merge layer is supported when ops->get_mm() returns 0. The implementation was changed during review, and in this process, a bug was introduced. Link: https://lore.kernel.org/netdev/20230111161706.1465242-5-vladimir.oltean@nxp.com/ Fixes: 04692c9020b7 ("net: ethtool: netlink: retrieve stats from multiple sources (eMAC, pMAC)") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu> Link: https://lore.kernel.org/all/20230220122343.1156614-2-vladimir.oltean@nxp.com/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-21ethtool: pse-pd: Fix double word in commentsBo Liu1-1/+1
Remove the repeated word "for" in comments. Signed-off-by: Bo Liu <liubo03@inspur.com> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20230221083036.2414-1-liubo03@inspur.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-13net: ethtool: extend ringparam set/get APIs for rx_pushShannon Nelson2-3/+16
Similar to what was done for TX_PUSH, add an RX_PUSH concept to the ethtool interfaces. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-07ethtool: mm: fix get_mm() return code not propagating to user spaceVladimir Oltean1-1/+1
If ops->get_mm() returns a non-zero error code, we goto out_complete, but there, we return 0. Fix that to propagate the "ret" variable to the caller. If ops->get_mm() succeeds, it will always return 0. Fixes: 2b30f8291a30 ("net: ethtool: add support for MAC Merge layer") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230206094932.446379-1-vladimir.oltean@nxp.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-27ethtool: netlink: convert commands to common SETJakub Kicinski16-725/+508
Convert all SET commands where new common code is applicable. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-27ethtool: netlink: handle SET intro/outro in the common codeJakub Kicinski3-50/+100
Most ethtool SET callbacks follow the same general structure. ethnl_parse_header_dev_get() rtnl_lock() ethnl_ops_begin() ... do stuff ... ethtool_notify() ethnl_ops_complete() rtnl_unlock() ethnl_parse_header_dev_put() This leads to a lot of copy / pasted code an bugs when people mis-handle the error path. Add a generic implementation of this pattern with a .set callback in struct ethnl_request_ops called to "do stuff". Also add an optional .set_validate which is called before ethnl_ops_begin() -- a lot of implementations do basic request capability / sanity checking at that point. Because we want to avoid generating the notification when no change happened - adopt a slightly hairy return values: - 0 means nothing to do (no notification) - 1 means done / continue - negative error codes on error Reuse .hdr_attr from struct ethnl_request_ops, GET and SET use the same attr spaces in all cases. Convert pause as an example (and to avoid unused function warnings). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-25net: ethtool: fix NULL pointer dereference in pause_prepare_data()Vladimir Oltean1-1/+1
In the following call path: ethnl_default_dumpit -> ethnl_default_dump_one -> ctx->ops->prepare_data -> pause_prepare_data struct genl_info *info will be passed as NULL, and pause_prepare_data() dereferences it while getting the extended ack pointer. To avoid that, just set the extack to NULL if "info" is NULL, since the netlink extack handling messages know how to deal with that. The pattern "info ? info->extack : NULL" is present in quite a few other "prepare_data" implementations, so it's clear that it's a more general problem to be dealt with at a higher level, but the code should have at least adhered to the current conventions to avoid the NULL dereference. Fixes: 04692c9020b7 ("net: ethtool: netlink: retrieve stats from multiple sources (eMAC, pMAC)") Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reported-by: syzbot+9d44aae2720fc40b8474@syzkaller.appspotmail.com Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-25net: ethtool: fix NULL pointer dereference in stats_prepare_data()Vladimir Oltean1-1/+1
In the following call path: ethnl_default_dumpit -> ethnl_default_dump_one -> ctx->ops->prepare_data -> stats_prepare_data struct genl_info *info will be passed as NULL, and stats_prepare_data() dereferences it while getting the extended ack pointer. To avoid that, just set the extack to NULL if "info" is NULL, since the netlink extack handling messages know how to deal with that. The pattern "info ? info->extack : NULL" is present in quite a few other "prepare_data" implementations, so it's clear that it's a more general problem to be dealt with at a higher level, but the code should have at least adhered to the current conventions to avoid the NULL dereference. Fixes: 04692c9020b7 ("net: ethtool: netlink: retrieve stats from multiple sources (eMAC, pMAC)") Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-23ethtool: Add and use ethnl_update_bool.David S. Miller2-1/+27
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-23net: ethtool: add helpers for aggregate statisticsVladimir Oltean1-0/+127
When a pMAC exists but the driver is unable to atomically query the aggregate eMAC+pMAC statistics, the user should be given back at least the sum of eMAC and pMAC counters queried separately. This is a generic problem, so add helpers in ethtool to do this operation, if the driver doesn't have a better way to report aggregate stats. Do this in a way that does not require changes to these functions when new stats are added (basically treat the structures as an array of u64 values, except for the first element which is the stats source). In include/linux/ethtool.h, there is already a section where helper function prototypes should be placed. The trouble is, this section is too early, before the definitions of struct ethtool_eth_mac_stats et.al. Move that section at the end and append these new helpers to it. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-23net: ethtool: netlink: retrieve stats from multiple sources (eMAC, pMAC)Vladimir Oltean5-3/+99
IEEE 802.3-2018 clause 99 defines a MAC Merge sublayer which contains an Express MAC and a Preemptible MAC. Both MACs are hidden to higher and lower layers and visible as a single MAC (packet classification to eMAC or pMAC on TX is done based on priority; classification on RX is done based on SFD). For devices which support a MAC Merge sublayer, it is desirable to retrieve individual packet counters from the eMAC and the pMAC, as well as aggregate statistics (their sum). Introduce a new ETHTOOL_A_STATS_SRC attribute which is part of the policy of ETHTOOL_MSG_STATS_GET and, and an ETHTOOL_A_PAUSE_STATS_SRC which is part of the policy of ETHTOOL_MSG_PAUSE_GET (accepted when ETHTOOL_FLAG_STATS is set in the common ethtool header). Both of these take values from enum ethtool_mac_stats_src, defaulting to "aggregate" in the absence of the attribute. Existing drivers do not need to pay attention to this enum which was added to all driver-facing structures, just the ones which report the MAC merge layer as supported. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-23net: ethtool: add support for MAC Merge layerVladimir Oltean4-2/+280
The MAC merge sublayer (IEEE 802.3-2018 clause 99) is one of 2 specifications (the other being Frame Preemption; IEEE 802.1Q-2018 clause 6.7.2), which work together to minimize latency caused by frame interference at TX. The overall goal of TSN is for normal traffic and traffic with a bounded deadline to be able to cohabitate on the same L2 network and not bother each other too much. The standards achieve this (partly) by introducing the concept of preemptible traffic, i.e. Ethernet frames that have a custom value for the Start-of-Frame-Delimiter (SFD), and these frames can be fragmented and reassembled at L2 on a link-local basis. The non-preemptible frames are called express traffic, they are transmitted using a normal SFD, and they can preempt preemptible frames, therefore having lower latency, which can matter at lower (100 Mbps) link speeds, or at high MTUs (jumbo frames around 9K). Preemption is not recursive, i.e. a P frame cannot preempt another P frame. Preemption also does not depend upon priority, or otherwise said, an E frame with prio 0 will still preempt a P frame with prio 7. In terms of implementation, the standards talk about the presence of an express MAC (eMAC) which handles express traffic, and a preemptible MAC (pMAC) which handles preemptible traffic, and these MACs are multiplexed on the same MII by a MAC merge layer. To support frame preemption, the definition of the SFD was generalized to SMD (Start-of-mPacket-Delimiter), where an mPacket is essentially an Ethernet frame fragment, or a complete frame. Stations unaware of an SMD value different from the standard SFD will treat P frames as error frames. To prevent that from happening, a negotiation process is defined. On RX, packets are dispatched to the eMAC or pMAC after being filtered by their SMD. On TX, the eMAC/pMAC classification decision is taken by the 802.1Q spec, based on packet priority (each of the 8 user priority values may have an admin-status of preemptible or express). The MAC Merge layer and the Frame Preemption parameters have some degree of independence in terms of how software stacks are supposed to deal with them. The activation of the MM layer is supposed to be controlled by an LLDP daemon (after it has been communicated that the link partner also supports it), after which a (hardware-based or not) verification handshake takes place, before actually enabling the feature. So the process is intended to be relatively plug-and-play. Whereas FP settings are supposed to be coordinated across a network using something approximating NETCONF. The support contained here is exclusively for the 802.3 (MAC Merge) portions and not for the 802.1Q (Frame Preemption) parts. This API is sufficient for an LLDP daemon to do its job. The FP adminStatus variable from 802.1Q is outside the scope of an LLDP daemon. I have taken a few creative licenses and augmented the Linux kernel UAPI compared to the standard managed objects recommended by IEEE 802.3. These are: - ETHTOOL_A_MM_PMAC_ENABLED: According to Figure 99-6: Receive Processing state diagram, a MAC Merge layer is always supposed to be able to receive P frames. However, this implies keeping the pMAC powered on, which will consume needless power in applications where FP will never be used. If LLDP is used, the reception of an Additional Ethernet Capabilities TLV from the link partner is sufficient indication that the pMAC should be enabled. So my proposal is that in Linux, we keep the pMAC turned off by default and that user space turns it on when needed. - ETHTOOL_A_MM_VERIFY_ENABLED: The IEEE managed object is called aMACMergeVerifyDisableTx. I opted for consistency (positive logic) in the boolean netlink attributes offered, so this is also positive here. Other than the meaning being reversed, they correspond to the same thing. - ETHTOOL_A_MM_MAX_VERIFY_TIME: I found it most reasonable for a LLDP daemon to maximize the verifyTime variable (delay between SMD-V transmissions), to maximize its chances that the LP replies. IEEE says that the verifyTime can range between 1 and 128 ms, but the NXP ENETC stupidly keeps this variable in a 7 bit register, so the maximum supported value is 127 ms. I could have chosen to hardcode this in the LLDP daemon to a lower value, but why not let the kernel expose its supported range directly. - ETHTOOL_A_MM_TX_MIN_FRAG_SIZE: the standard managed object is called aMACMergeAddFragSize, and expresses the "additional" fragment size (on top of ETH_ZLEN), whereas this expresses the absolute value of the fragment size. - ETHTOOL_A_MM_RX_MIN_FRAG_SIZE: there doesn't appear to exist a managed object mandated by the standard, but user space clearly needs to know what is the minimum supported fragment size of our local receiver, since LLDP must advertise a value no lower than that. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-4/+7
drivers/net/ipa/ipa_interrupt.c drivers/net/ipa/ipa_interrupt.h 9ec9b2a30853 ("net: ipa: disable ipa interrupt during suspend") 8e461e1f092b ("net: ipa: introduce ipa_interrupt_enable()") d50ed3558719 ("net: ipa: enable IPA interrupt handlers separate from registration") https://lore.kernel.org/all/20230119114125.5182c7ab@canb.auug.org.au/ https://lore.kernel.org/all/79e46152-8043-a512-79d9-c3b905462774@tessares.net/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-13plca.c: fix obvious mistake in checking retvalPiergiorgio Beruto1-5/+5
Revert a wrong fix that was done during the review process. The intention was to substitute "if(ret < 0)" with "if(ret)". Unfortunately, the intended fix did not meet the code. Besides, after additional review, it was decided that "if(ret < 0)" was actually the right thing to do. Fixes: 8580e16c28f3 ("net/ethtool: add netlink interface for the PLCA RS") Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/f2277af8951a51cfee2fb905af8d7a812b7beaf4.1673616357.git.piergiorgio.beruto@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-13ethtool: add tx aggregation parametersDaniele Palmas1-2/+20
Add the following ethtool tx aggregation parameters: ETHTOOL_A_COALESCE_TX_AGGR_MAX_BYTES Maximum size in bytes of a tx aggregated block of frames. ETHTOOL_A_COALESCE_TX_AGGR_MAX_FRAMES Maximum number of frames that can be aggregated into a block. ETHTOOL_A_COALESCE_TX_AGGR_TIME_USECS Time in usecs after the first packet arrival in an aggregated block for the block to be sent. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-12ethtool: add netlink attr in rss get reply only if value is not nullSudheer Mogilappagari1-4/+7
Current code for RSS_GET ethtool command includes netlink attributes in reply message to user space even if they are null. Added checks to include netlink attribute in reply message only if a value is received from driver. Drivers might return null for RSS indirection table or hash key. Instead of including attributes with empty value in the reply message, add netlink attribute only if there is content. Fixes: 7112a04664bf ("ethtool: add netlink based get rss support") Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Link: https://lore.kernel.org/r/20230111235607.85509-1-sudheer.mogilappagari@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-11drivers/net/phy: add the link modes for the 10BASE-T1S Ethernet PHYPiergiorgio Beruto1-0/+8
This patch adds the link modes for the IEEE 802.3cg Clause 147 10BASE-T1S Ethernet PHY. According to the specifications, the 10BASE-T1S supports Point-To-Point Full-Duplex, Point-To-Point Half-Duplex and/or Point-To-Multipoint (AKA Multi-Drop) Half-Duplex operations. Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-11net/ethtool: add netlink interface for the PLCA RSPiergiorgio Beruto4-1/+313
Add support for configuring the PLCA Reconciliation Sublayer on multi-drop PHYs that support IEEE802.3cg-2019 Clause 148 (e.g., 10BASE-T1S). This patch adds the appropriate netlink interface to ethtool. Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-28net/ethtool/ioctl: split ethtool_get_phy_stats into multiple helpersDaniil Tatianin1-33/+69
So that it's easier to follow and make sense of the branching and various conditions. Stats retrieval has been split into two separate functions ethtool_get_phy_stats_phydev & ethtool_get_phy_stats_ethtool. The former attempts to retrieve the stats using phydev & phy_ops, while the latter uses ethtool_ops. Actual n_stats validation & array allocation has been moved into a new ethtool_vzalloc_stats_array helper. This also fixes a potential NULL dereference of ops->get_ethtool_phy_stats where it was getting called in an else branch unconditionally without making sure it was actually present. Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-28net/ethtool/ioctl: remove if n_stats checks from ethtool_get_phy_statsDaniil Tatianin1-14/+10
Now that we always early return if we don't have any stats we can remove these checks as they're no longer necessary. Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-28net/ethtool/ioctl: return -EOPNOTSUPP if we have no phy statsDaniil Tatianin1-1/+2
It's not very useful to copy back an empty ethtool_stats struct and return 0 if we didn't actually have any stats. This also allows for further simplification of this function in the future commits. Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-08net_tstamp: add SOF_TIMESTAMPING_OPT_ID_TCPWillem de Bruijn1-0/+1
Add an option to initialize SOF_TIMESTAMPING_OPT_ID for TCP from write_seq sockets instead of snd_una. This should have been the behavior from the start. Because processes may now exist that rely on the established behavior, do not change behavior of the existing option, but add the right behavior with a new flag. It is encouraged to always set SOF_TIMESTAMPING_OPT_ID_TCP on stream sockets along with the existing SOF_TIMESTAMPING_OPT_ID. Intuitively the contract is that the counter is zero after the setsockopt, so that the next write N results in a notification for the last byte N - 1. On idle sockets snd_una == write_seq and this holds for both. But on sockets with data in transmission, snd_una records the unacked offset in the stream. This depends on the ACK response from the peer. A process cannot learn this in a race free manner (ioctl SIOCOUTQ is one racy approach). write_seq records the offset at the last byte written by the process. This is a better starting point. It matches the intuitive contract in all circumstances, unaffected by external behavior. The new timestamp flag necessitates increasing sk_tsflags to 32 bits. Move the field in struct sock to avoid growing the socket (for some common CONFIG variants). The UAPI interface so_timestamping.flags is already int, so 32 bits wide. Reported-by: Sotirios Delimanolis <sotodel@meta.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20221207143701.29861-1-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-05ethtool: add netlink based get rss supportSudheer Mogilappagari4-1/+163
Add netlink based support for "ethtool -x <dev> [context x]" command by implementing ETHTOOL_MSG_RSS_GET netlink message. This is equivalent to functionality provided via ETHTOOL_GRSSH in ioctl path. It sends RSS table, hash key and hash function of an interface to user space. This patch implements existing functionality available in ioctl path and enables addition of new RSS context based parameters in future. Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Link: https://lore.kernel.org/r/20221202002555.241580-1-sudheer.mogilappagari@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-23ethtool: avoiding integer overflow in ethtool_phys_id()Maxim Korotkov1-1/+2
The value of an arithmetic expression "n * id.data" is subject to possible overflow due to a failure to cast operands to a larger data type before performing arithmetic. Used macro for multiplication instead operator for avoiding overflow. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Maxim Korotkov <korotkov.maxim.s@gmail.com> Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20221122122901.22294-1-korotkov.maxim.s@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-10ethtool: ethtool_get_drvinfo: populate drvinfo fields even if callback exitsVincent Mailhol1-3/+10
If ethtool_ops::get_drvinfo() callback isn't set, ethtool_get_drvinfo() will fill the ethtool_drvinfo::name and ethtool_drvinfo::bus_info fields. However, if the driver provides the callback function, those two fields are not touched. This means that the driver has to fill these itself. Allow the driver to leave those two fields empty and populate them in such case. This way, the driver can rely on the default values for the name and the bus_info. If the driver provides values, do nothing. Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/r/20221108035754.2143-1-mailhol.vincent@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-08ethtool: Fail number of channels change when it conflicts with rxnfcGal Pressman4-11/+92
Similar to what we do with the hash indirection table [1], when network flow classification rules are forwarding traffic to channels greater than the requested number of channels, fail the operation. Without this, traffic could be directed to channels which no longer exist (dropped) after changing number of channels. [1] commit d4ab4286276f ("ethtool: correctly ensure {GS}CHANNELS doesn't conflict with GS{RXFH}") Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Link: https://lore.kernel.org/r/20221106123127.522985-1-gal@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-08ethtool: linkstate: add a statistic for PHY down eventsJakub Kicinski1-1/+23
The previous attempt to augment carrier_down (see Link) was not met with much enthusiasm so let's do the simple thing of exposing what some devices already maintain. Add a common ethtool statistic for link going down. Currently users have to maintain per-driver mapping to extract the right stat from the vendor-specific ethtool -S stats. carrier_down does not fit the bill because it counts a lot of software related false positives. Add the statistic to the extended link state API to steer vendors towards implementing all of it. Implement for bnxt and all Linux-controlled PHYs. mlx5 and (possibly) enic also have a counter for this but I leave the implementation to their maintainers. Link: https://lore.kernel.org/r/20220520004500.2250674-1-kuba@kernel.org Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20221104190125.684910-1-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-03net: devlink: use devlink_port pointer instead of ndo_get_devlink_portJiri Pirko1-9/+2
Use newly introduced devlink_port pointer instead of getting it calling to ndo_get_devlink_port op. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c 2871edb32f46 ("can: kvaser_usb: Fix possible completions during init_completion") abb8670938b2 ("can: kvaser_usb_leaf: Ignore stale bus-off after start") 8d21f5927ae6 ("can: kvaser_usb_leaf: Fix improved state not being reported") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-24ethtool: eeprom: fix null-deref on genl_info in dumpXin Long1-1/+1
The similar fix as commit 46cdedf2a0fa ("ethtool: pse-pd: fix null-deref on genl_info in dump") is also needed for ethtool eeprom. Fixes: c781ff12a2f3 ("ethtool: Allow network drivers to dump arbitrary EEPROM data") Signed-off-by: Xin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/r/5575919a2efc74cd9ad64021880afc3805c54166.1666362167.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
include/linux/net.h a5ef058dc4d9 ("net: introduce and use custom sockopt socket flag") e993ffe3da4b ("net: flag sockets supporting msghdr originated zerocopy") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-24ethtool: Add support for 800Gbps link modesAmit Cohen1-0/+14
Add support for 800Gbps speed, link modes of 100Gbps per lane. As mentioned in slide 21 in IEEE documentation [1], all adopted 802.3df copper and optical PMDs baselines using 100G/lane will be supported. Add the relevant PMDs which are mentioned in slide 5 in IEEE documentation [1] and were approved on 10-2022 [2]: BP - KR8 Cu Cable - CR8 MMF 50m - VR8 MMF 100m - SR8 SMF 500m - DR8 SMF 2km - DR8-2 [1]: https://www.ieee802.org/3/df/public/22_10/22_1004/shrikhande_3df_01a_221004.pdf [2]: https://ieee802.org/3/df/KeyMotions_3df_221005.pdf Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-21ethtool: pse-pd: fix null-deref on genl_info in dumpJakub Kicinski1-1/+1
ethnl_default_dump_one() passes NULL as info. It's correct not to set extack during dump, as we should just silently skip interfaces which can't provide the information. Reported-by: syzbot+81c4b4bbba6eea2cfcae@syzkaller.appspotmail.com Fixes: 18ff0bcda6d1 ("ethtool: add interface to interact with Ethernet Power Equipment") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03ethtool: add interface to interact with Ethernet Power EquipmentOleksij Rempel5-1/+209
Add interface to support Power Sourcing Equipment. At current step it provides generic way to address all variants of PSE devices as defined in IEEE 802.3-2018 but support only objects specified for IEEE 802.3-2018 104.4 PoDL Power Sourcing Equipment (PSE). Currently supported and mandatory objects are: IEEE 802.3-2018 30.15.1.1.3 aPoDLPSEPowerDetectionStatus IEEE 802.3-2018 30.15.1.1.2 aPoDLPSEAdminState IEEE 802.3-2018 30.15.1.2.1 acPoDLPSEAdminControl This is minimal interface needed to control PSE on each separate ethernet port but it provides not all mandatory objects specified in IEEE 802.3-2018. Since "PoDL PSE" and "PSE" have similar names, but some different values I decide to not merge them and keep separate naming schema. This should allow as to be as close to IEEE 802.3 spec as possible and avoid name conflicts in the future. This implementation is connected to PHYs instead of MACs because PSE auto classification can potentially interfere with PHY auto negotiation. So, may be some extra PHY related initialization will be needed. With WIP version of ethtools interaction with PSE capable link looks as following: $ ip l ... 5: t1l1@eth0: <BROADCAST,MULTICAST> .. ... $ ethtool --show-pse t1l1 PSE attributs for t1l1: PoDL PSE Admin State: disabled PoDL PSE Power Detection Status: disabled $ ethtool --set-pse t1l1 podl-pse-admin-control enable $ ethtool --show-pse t1l1 PSE attributs for t1l1: PoDL PSE Admin State: enabled PoDL PSE Power Detection Status: delivering power Signed-off-by: kernel test robot <lkp@intel.com> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-23net: phy: Add support for rate matchingSean Anderson2-0/+6
This adds support for rate matching (also known as rate adaptation) to the phy subsystem. The general idea is that the phy interface runs at one speed, and the MAC throttles the rate at which it sends packets to the link speed. There's a good overview of several techniques for achieving this at [1]. This patch adds support for three: pause-frame based (such as in Aquantia phys), CRS-based (such as in 10PASS-TS and 2BASE-TL), and open-loop-based (such as in 10GBASE-W). This patch makes a few assumptions and a few non assumptions about the types of rate matching available. First, it assumes that different phys may use different forms of rate matching. Second, it assumes that phys can use rate matching for any of their supported link speeds (e.g. if a phy supports 10BASE-T and XGMII, then it can adapt XGMII to 10BASE-T). Third, it does not assume that all interface modes will use the same form of rate matching. Fourth, it does not assume that all phy devices will support rate matching (even if some do). Relaxing or strengthening these (non-)assumptions could result in a different API. For example, if all interface modes were assumed to use the same form of rate matching, then a bitmask of interface modes supportting rate matching would suffice. For some better visibility into the process, the current rate matching mode is exposed as part of the ethtool ksettings. For the moment, only read access is supported. I'm not sure what userspace might want to configure yet (disable it altogether, disable just one mode, specify the mode to use, etc.). For the moment, since only pause-based rate adaptation support is added in the next few commits, rate matching can be disabled altogether by adjusting the advertisement. 802.3 calls this feature "rate adaptation" in clause 49 (10GBASE-R) and "rate matching" in clause 61 (10PASS-TL and 2BASE-TS). Aquantia also calls this feature "rate adaptation". I chose "rate matching" because it is shorter, and because Russell doesn't think "adaptation" is correct in this context. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-22ethtool: tunnels: check the return value of nla_nest_start()Li Zhong1-0/+2
Check the return value of nla_nest_start(). When starting the entry level nested attributes, if the tailroom of socket buffer is insufficient to store the attribute header and payload, the return value will be NULL. There is, however, no real bug here since if the skb is full nla_put_be16() will fail as well and we'll error out. Signed-off-by: Li Zhong <floridsleeves@gmail.com> Link: https://lore.kernel.org/r/20220921181716.1629541-1-floridsleeves@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-30ethtool: report missing header via ext_ack in the default handlerJakub Kicinski1-0/+3
The actual presence check for the header is in ethnl_parse_header_dev_get() but it's a few layers in, and already has a ton of arguments so let's just pick the low hanging fruit and check for missing header in the default request handler. Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-30ethtool: strset: report missing ETHTOOL_A_STRINGSET_ID via ext_ackJakub Kicinski1-1/+1
Strset needs ETHTOOL_A_STRINGSET_ID, use it as an example of reporting attrs missing in nests. Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-29genetlink: start to validate reserved header bytesJakub Kicinski1-0/+1
We had historically not checked that genlmsghdr.reserved is 0 on input which prevents us from using those precious bytes in the future. One use case would be to extend the cmd field, which is currently just 8 bits wide and 256 is not a lot of commands for some core families. To make sure that new families do the right thing by default put the onus of opting out of validation on existing families. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Paul Moore <paul@paul-moore.com> (NetLabel) Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-22ethtool: move from strlcpy with unused retval to strscpyWolfram Sang1-4/+4
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220818210218.8443-1-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-25net: delete extra space and tab in blank lineWilliam Dean1-1/+1
delete extra space and tab in blank line, there is no functional change. Reported-by: Hacash Robot <hacashRobot@santino.com> Signed-off-by: William Dean <williamsukatube@gmail.com> Link: https://lore.kernel.org/r/20220723073222.2961602-1-williamsukatube@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-17ethtool: Fix get module eeprom fallbackIvan Vecera1-1/+1
Function fallback_set_params() checks if the module type returned by a driver is ETH_MODULE_SFF_8079 and in this case it assumes that buffer returns a concatenated content of page A0h and A2h. The check is wrong because the correct type is ETH_MODULE_SFF_8472. Fixes: 96d971e307cc ("ethtool: Add fallback to get_module_eeprom from netlink command") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20220616160856.3623273-1-ivecera@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-13ethtool: Fix and simplify ethtool_convert_link_mode_to_legacy_u32()Marco Bonelli1-15/+2
Fix the implementation of ethtool_convert_link_mode_to_legacy_u32(), which is supposed to return false if src has bits higher than 31 set. The current implementation uses the complement of bitmap_fill(ext, 32) to test high bits of src, which is wrong as bitmap_fill() fills _with long granularity_, and sizeof(long) can be > 4. No users of this function currently check the return value, so the bug was dormant. Also remove the check for __ETHTOOL_LINK_MODE_MASK_NBITS > 32, as the enum ethtool_link_mode_bit_indices contains far beyond 32 values. Using find_next_bit() to test the src bitmask works regardless of this anyway. Signed-off-by: Marco Bonelli <marco@mebeim.net> Link: https://lore.kernel.org/r/20220609134900.11201-1-marco@mebeim.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-09net: rename reference+tracking helpersJakub Kicinski3-6/+6
Netdev reference helpers have a dev_ prefix for historic reasons. Renaming the old helpers would be too much churn but we can rename the tracking ones which are relatively recent and should be the default for new code. Rename: dev_hold_track() -> netdev_hold() dev_put_track() -> netdev_put() dev_replace_track() -> netdev_ref_replace() Link: https://lore.kernel.org/r/20220608043955.919359-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-01ethtool: Add 10base-T1L link mode entryAlexandru Tachici1-0/+3
Add entry for the 10base-T1L full duplex mode. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15net: ethtool: move checks before rtnl_lock() in ethnl_set_ringsJie Wang1-18/+18
Currently these two checks in ethnl_set_rings are added after rtnl_lock() which will do useless works if the request is invalid. So this patch moves these checks before the rtnl_lock() to avoid these costs. Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-15net: ethtool: extend ringparam set/get APIs for tx_pushJie Wang2-3/+17
Currently tx push is a standard driver feature which controls use of a fast path descriptor push. So this patch extends the ringparam APIs and data structures to support set/get tx push by ethtool -G/g. Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-23ethtool: add support to set/get completion queue event sizeSubbaraya Sundeep2-3/+18
Add support to set completion queue event size via ethtool -G parameter and get it via ethtool -g parameter. ~ # ./ethtool -G eth0 cqe-size 512 ~ # ./ethtool -g eth0 Ring parameters for eth0: Pre-set maximums: RX: 1048576 RX Mini: n/a RX Jumbo: n/a TX: 1048576 Current hardware settings: RX: 256 RX Mini: n/a RX Jumbo: n/a TX: 4096 RX Buf Len: 2048 CQE Size: 128 Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-28 08:58:15 +0000