summaryrefslogtreecommitdiff
path: root/include/sound
AgeCommit message (Collapse)AuthorFilesLines
2009-10-15ASoC: Codec driver for Texas Instruments tlv320dac33 codecPeter Ujfalusi1-0/+20
Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15ASoC: Remove snd_soc_suspend_device()Mark Brown1-5/+0
The PM core will grow pm_link infrastructure in 2.6.33 which can be used to implement the intended functionality of the ASoC-specific device suspend and resume callbacks so drop them. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-09ASoC: TPA6130A2 amplifier driverPeter Ujfalusi1-0/+30
Driver for Texas Instruments TPA6130A2 stereo headphone amplifier. The driver provides playback gain control and also pre-defined DAPM_HP widgets and DAPM routings for power management. The DAPM_HP widget names are: "TPA6130A2 Headphone Left" "TPA6130A2 Headphone Right" From soc machine drivers to use with the tpa6130a2 amplifier, the tpa6130a2_add_controls has to be called, which adds the alsa controls and the DAPM routing needed for the tpa6130a2. After that the machine driver can connect the codec's output with 'TPA6130A2 Left' and 'TPA6130A2 Right': {"TPA6130A2 Left", NULL, "CODEC LEFT OUT"}, {"TPA6130A2 Right", NULL, "CODEC RIGHT OUT"}, Internally the left and right channels are powered separately. When none of the channels are needed the amplifier is powered down: hard power: valid GPIO number is passed within platform data soft power: Using the software shutdown of the amplifier Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-06Merge branch 'for-2.6.32' into for-2.6.33Mark Brown8-41/+64
2009-10-06ASoC: Add virtual enumeration support for DAPM muxesMark Brown1-0/+10
Sometimes it is desirable to have a mux which does not reflect any direct register configuration but which will instead only have an effect implicitly (for example, as a result of changing which parts of the device are powered up). Provide a virtual mux for this purpose. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-01ASoC: add support for multiple cards/codecs in debugfsPeter Ujfalusi1-0/+1
In order to support multiple codecs on the same system in the debugfs the directory hierarchy need to be changed by adding directory per codec under the asoc direcorty: debugfs/asoc/{dev_name(socdev->dev)}-{codec->name}/codec_reg /dapm_pop_time /dapm/{widgets} With the original implementation only the debugfs files are only created for the first codec, other codecs loaded later would fail to create the debugfs files (since they are already exist). Furthermore in this situation any of the codecs has been removed, would cause the debugfs entries to disappear, regardless if the codec, which created them are still loaded (the one which loaded first). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-09-28ASoC: Add PDM DAI format definitionLopez Cruz, Misael1-0/+1
Add DAI format definition for PDM interfaces. Signed-off-by: Misael Lopez Cruz <x0052729@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-09-18Merge branch 'for-2.6.32' into for-2.6.33Mark Brown1-1/+0
2009-09-13ASoC: Provide API for reordering channelsBarry Song1-0/+7
The patch adds an interface to set the relationship between audio channel number and slot number. The interface should be really useful because audio channel n doesn't always use slot n in all platforms. And for some devices, the relationship even can change with sound mode switch in 2.1,3.1,4.1,5.1,6.1,7.1 etc. Signed-off-by: Barry Song <21cnbao@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-09-10Merge branch 'topic/ymfpci' into for-linusTakashi Iwai1-0/+1
* topic/ymfpci: sound: ymfpci: increase timer resolution to 96 kHz
2009-09-10Merge branch 'topic/tlv-minmax' into for-linusTakashi Iwai1-0/+14
* topic/tlv-minmax: ALSA: usb-audio - Correct bogus volume dB information ALSA: usb-audio - Use the new TLV_DB_MINMAX type ALSA: Add new TLV types for dBwith min/max
2009-09-10Merge branch 'topic/snd-printk' into for-linusTakashi Iwai1-24/+14
* topic/snd-printk: ALSA: Fixed a typo of printk() ALSA: Add debug module option ALSA: core - strip too long file names in snd_print*()
2009-09-10Merge branch 'topic/pcm-drain-nonblock' into for-linusTakashi Iwai1-1/+1
* topic/pcm-drain-nonblock: ALSA: pcm - Increase protocol version ALSA: pcm - Fix drain behavior in non-blocking mode
2009-09-10Merge branch 'topic/misc' into for-linusTakashi Iwai2-14/+1
* topic/misc: ALSA: Remove unneeded ifdef from sound/core.h ALSA: Remove struct snd_monitor_file from public sound/core.h ALSA: Release v1.0.21
2009-09-10Merge branch 'topic/dummy' into for-linusTakashi Iwai2-2/+4
* topic/dummy: ALSA: dummy - Increase MAX_PCM_SUBSTREAMS to 128 ALSA: dummy - Add debug proc file ALSA: Add const prefix to proc helper functions ALSA: Re-export snd_pcm_format_name() function ALSA: dummy - Fake buffer allocations ALSA: dummy - Fix the timer calculation in systimer mode ALSA: dummy - Add more description ALSA: dummy - Better jiffies handling ALSA: dummy - Support high-res timer mode
2009-09-10Merge branch 'topic/dma-sgbuf' into for-linusTakashi Iwai2-0/+29
* topic/dma-sgbuf: ALSA: Fix SG-buffer DMA with non-coherent architectures
2009-09-08ASoC: Allow per-route connectedness checks for suppliesMark Brown1-0/+7
Some chips with complex internal supply (particularly clocking) arragements may have multiple options for some of the supply connections. Since these don't affect user-visible audio routing the expectation would be that they would be managed automatically by one of the drivers. Support these users by allowing routes to have a connected function which is queried before the connectedness of the path is checked as normal. Currently this is only done for supplies, other widgets could be supported but are not currently since the expectation for them is that audio routing will be under the control of userspace. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-09-08ALSA: Add const prefix to proc helper functionsTakashi Iwai1-2/+2
Add appropriate const prefix to char * arguments in proc helper functions. Also fixed the caller side to be proper const pointers. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-08ALSA: Re-export snd_pcm_format_name() functionTakashi Iwai1-0/+2
Re-export snd_pcm_format_name() function to be used outside the PCM core. As a first example, usbaudio is changed to use it now again. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-07ALSA: Remove unneeded ifdef from sound/core.hTakashi Iwai1-4/+0
Remove the old hack that was needed for building alsa-driver modules externally for old kernels. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-07ALSA: Remove struct snd_monitor_file from public sound/core.hTakashi Iwai1-9/+0
The struct snd_monitor_file is used locally only in sound/core/init.c, thus it should be moved there from the public sound/core.h. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-07ASoC: Remove unuused hw_read_tMark Brown1-1/+0
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-09-05ASoC: Add source argument to PLL configurationMark Brown1-3/+3
More and more devices feature PLLs and FLLs with the ability to select between multiple input clocks. In order to better support these devices a new argument, source, has been added to the set_pll() configuration API. Using set_clkdiv() is often difficult due to the need to stop the PLL/FLL before any reconfiguration can be done. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-09-03ALSA: Release v1.0.21Jaroslav Kysela1-1/+1
Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-28ALSA: Fixed a typo of printk()Takashi Iwai1-1/+1
Fixed a silly typo of printk() included in the previous patch... Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-27ALSA: pcm - Increase protocol versionTakashi Iwai1-1/+1
Increase the PCM protocol version to indicate the drain ioctl behavior change. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-27ALSA: Add debug module optionTakashi Iwai1-24/+14
Add debug module option to snd core. This controls the debug print level. When CONFIG_SND_DEBUG_VERBOSE is set, you can suppress the debug messages by giving or changing this parameter to a lower value. debug=0 means no debug messsages. As default, it's set to the verbose level 2. Since this option can be changed dynamically via sysfs file, you can suppress the verbose debug messages on the fly, which wasn't possible before. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-24Merge branch 'topic/digital-mixing' into for-2.6.32Mark Brown1-0/+8
2009-08-21ASoC: Add DAPM widget power decision debugfs filesMark Brown2-0/+2
Currently when built with DEBUG DAPM will dump information about the power state decisions it is taking for each widget to dmesg. This isn't an ideal way of getting the information - it requires a kernel build to turn it on and off and for large hub CODECs the volume of information is so large as to be illegible. When the output goes to the console it can also cause a noticable impact on performance simply to print it out. Improve the situation by adding a dapm directory to our debugfs tree containing a file per widget with the same information in it. This still requires a decision to build with debugfs support but is easier to navigate and much less intrusive. In addition to the previously displayed information active streams are also shown in these files. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20ASoC: Add SuperH FSI driver support for ALSAKuninori Morimoto1-0/+83
This driver is very simple. It support playback only now. This patch is tested by ms7724se board. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-18ASoC: Add input and output AIF widgetsMark Brown1-0/+8
Currently DAPM interfaces with the audio streams to and from the processor at the DAC and ADC widgets. As the digital capabilities of parts increases this is becoming a less and less able to meet the needs of parts. To meet the needs of these devices create new widgets interfacing with the TDM bus but not integrated into any other functionality. Audio can then be routed to and from these widgets using existing routing widgets. A slot number is provided in the definition but this is currently not used yet. This is intended to support devices which can use more than one TDM slot on a single interface. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-13ALSA: Allow passing platform_data for pxa2xx-ac97Marek Vasut1-0/+3
This patch adds support for passing platform data to ac97 bus devices from PXA2xx-AC97 driver.. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-11Merge commit 'a5479e389e989acfeca9c32eeb0083d086202280' into for-2.6.32Mark Brown1-2/+3
2009-08-10sound: ymfpci: increase timer resolution to 96 kHzClemens Ladisch1-0/+1
Allow the interval timer to be programmed with its full 96 kHz precision. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-09ASoC: Define more formats for the AC97 CODECsMark Brown1-1/+7
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-07Merge branch 'reg-cache' into for-2.6.32Mark Brown1-1/+10
2009-08-06ASoC: change set_tdm_slot api to allow slot_width override.Daniel Ribeiro1-2/+3
Extend set_tdm_slot to allow the user to arbitrarily set the frame width and active TX/RX slots. Updates magician.c and wm9081.c for the new set_tdm_slot(). wm9081.c still doesn't handle the slot_width override. While being there, correct an incorrect use of SlotsPerFrm(7) use in bitmask on pxa-ssp.c (SSCR0_SlotsPerFrm(x) is (((x) - 1) << 24)) ). (this series is meant for Mark's for-2.6.32 branch) Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-03ASoC: Factor out I2C 8 bit address 16 bit data I/OMark Brown1-1/+1
As part of this refactoring the type of the CODEC hw_read operation is changed to match the regular read operation. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-03ASoC: Add I/O control bus information to factored out cache setupMark Brown1-1/+8
While writes tend to be able to use a fairly bus independant format to do the writes reads are all bus specific. To allow us to factor out this code include the bus type as a parameter when setting up the cache. Initially just use this to factor out hw_write_t for I2C. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-31ASoC: Allow CODECs to flag invalid registersMark Brown1-0/+1
This helps CODECs with sparse register maps work better with the register cache display interface. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-23ALSA: Allow passing platform_data to devices attached to AC97 busMarek Vasut2-0/+7
This patch allows passing platform_data to devices attached to AC97 bus (like touchscreens, battery measurement chips ...). Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-15ASoC: add SOC_DOUBLE_R_EXT_TLV control typeJoonyoung Shim1-0/+11
This is a macro for double controls with special callback function and TLV. The SOC_DOUBLE_R_EXT_TLV needs two registers and one shift for double controls. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-15ASoC: add SOC_DOUBLE_EXT_TLV control typeJoonyoung Shim1-0/+11
This is a macro for double controls with special callback function and TLV. The SOC_DOUBLE_EXT_TLV needs one register and two shifts for double controls. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-13ASoC: fixes multiple typos in comments, no functional changePeter Meerwald1-13/+13
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-08ASoC: Add WM8993 CODEC driverMark Brown1-0/+44
The WM8993 is a highly integrated ultra-low power hi-fi CODEC designed for portable devices such as multimedia phones. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-08ALSA: Fix SG-buffer DMA with non-coherent architecturesTakashi Iwai2-0/+29
Using SG-buffers with dma_alloc_coherent() is often very inefficient on non-coherent architectures because a tracking record could be allocated in addition for each dma_alloc_coherent() call. Instead, simply disable SG-buffers but just allocate normal continuous buffers on non-supported (currently all but x86) architectures. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-05ASoC: Begin to factor out register cache I/O functionsMark Brown1-0/+2
A lot of CODECs share the same register data formats and therefore replicate the code to manage access to and caching of the register map. In order to reduce code duplication centralised versions of this code will be introduced with drivers able to configure the use of the common code by calling the new snd_soc_codec_set_cache_io() API call during startup. As an initial user the 7 bit address/9 bit data format used by many Wolfson devices is supported for write only CODECs and the drivers with straightforward register cache implementations are converted to use it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-05ASoC: Add CODEC volatile register operationMark Brown1-0/+2
Add a volatile_register() operation to the CODEC structure providing a standard operation to query if a register is volatile. This will be used to factor out the register cache I/O operations for the CODECs. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-25Merge branch 'for-2.6.32' of ↵Takashi Iwai3-4/+30
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into topic/asoc
2009-06-23ASoC: Add a shutdown callbackMark Brown1-0/+1
Ensure that the audio subsystem is powered down cleanly when the system shuts down by providing a shutdown operation. This ensures that all the components have been returned to an off state cleanly which should avoid audio issues from partially charged capacitors or noise on digital inputs if the system is restarted quickly. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Ben Dooks <ben-linux@fluff.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-29 15:31:49 +0000