summaryrefslogtreecommitdiff
path: root/drivers/spi
AgeCommit message (Collapse)AuthorFilesLines
2022-03-21Merge tag 'spi-v5.18' of ↵Linus Torvalds41-684/+3299
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "The overwhelming bulk of this pull request is a change from Uwe Kleine-König which changes the return type of the remove() function to void as part of some wider work he's doing to do this for all bus types, causing updates to most SPI device drivers. The branch with that on has been cross merged with a couple of other trees which added new SPI drivers this cycle, I'm not expecting any build issues resulting from the change. Otherwise it's been a relatively quiet release with some new device support, a few minor features and the welcome completion of the conversion of the subsystem to use GPIO descriptors rather than numbers: - Change return type of remove() to void. - Completion of the conversion of SPI controller drivers to use GPIO descriptors rather than numbers. - Quite a few DT schema conversions. - Support for multiple SPI devices on a bus in ACPI systems. - Big overhaul of the PXA2xx SPI driver. - Support for AMD AMDI0062, Intel Raptor Lake, Mediatek MT7986 and MT8186, nVidia Tegra210 and Tegra234, Renesas RZ/V2L, Tesla FSD and Sunplus SP7021" [ And this is obviously where that spi change that snuck into the regulator tree _should_ have been :^] * tag 'spi-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (124 commits) spi: fsi: Implement a timeout for polling status spi: Fix erroneous sgs value with min_t() spi: tegra20: Use of_device_get_match_data() spi: mediatek: add ipm design support for MT7986 spi: Add compatible for MT7986 spi: sun4i: fix typos in comments spi: mediatek: support tick_delay without enhance_timing spi: Update clock-names property for arm pl022 spi: rockchip-sfc: fix platform_get_irq.cocci warning spi: s3c64xx: Add spi port configuration for Tesla FSD SoC spi: dt-bindings: samsung: Add fsd spi compatible spi: topcliff-pch: Prevent usage of potentially stale DMA device spi: tegra210-quad: combined sequence mode spi: tegra210-quad: add acpi support spi: npcm-fiu: Fix typo ("npxm") spi: Fix Tegra QSPI example spi: qup: replace spin_lock_irqsave by spin_lock in hard IRQ spi: cadence: fix platform_get_irq.cocci warning spi: Update NXP Flexspi maintainer details dt-bindings: mfd: maxim,max77802: Convert to dtschema ...
2022-03-21Merge tag 'regulator-v5.18' of ↵Linus Torvalds1-5/+2
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "Quite a quiet release for the regulator API, mainly a few new drivers plus a lot of fixes for the Raspberry Pi panel driver. There's also a SPI commit in here which I managed to apply to the wrong tree and then didn't notice until there were too many commits on top of it, sorry about that. - Make it easier to use the virtual consumer test driver with DT systems. - Substantial overhaul providing various fixes and robustness improvements for the Raspberry Pi panel driver. - Support for Qualcomm PMX65 and SDX65, Richtek RT5190A, and Texas Instruments TPS62864x" * tag 'regulator-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (26 commits) regulator: qcom-rpmh: Add support for SDX65 regulator: dt-bindings: Add PMX65 compatibles regulator: vctrl: Use min() instead of doing it manually regulator: rt5190a: Add support for Richtek RT5190A PMIC regulator: Add bindings for Richtek RT5190A PMIC regulator: Convert TPS62360 binding to json-schema regulator: cleanup comments regulator: virtual: add devicetree support regulator: virtual: warn against production use regulator: virtual: use dev_err_probe() regulator: tps62864: Fix bindings for SW property regulator: Add support for TPS6286x regulator: Add bindings for TPS62864x regulator/rpi-panel-attiny: Use two transactions for I2C read regulator/rpi-panel-attiny: Use the regmap cache regulator: rpi-panel: Remove get_brightness hook regulator: rpi-panel: Add GPIO control for panel and touch resets regulator: rpi-panel: Convert to drive lines directly regulator: rpi-panel: Ensure the backlight is off during probe. regulator: rpi-panel: Serialise operations. ...
2022-03-18spi: fsi: Implement a timeout for polling statusEddie James1-0/+10
The data transfer routines must poll the status register to determine when more data can be shifted in or out. If the hardware gets into a bad state, these polling loops may never exit. Prevent this by returning an error if a timeout is exceeded. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20220317211426.38940-1-eajames@linux.ibm.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-03-17spi: Fix erroneous sgs value with min_t()Biju Das1-2/+2
While computing sgs in spi_map_buf(), the data type used in min_t() for max_seg_size is 'unsigned int' where as that of ctlr->max_dma_len is 'size_t'. min_t(unsigned int,x,y) gives wrong results if one of x/y is 'size_t' Consider the below examples on a 64-bit machine (ie size_t is 64-bits, and unsigned int is 32-bit). case 1) min_t(unsigned int, 5, 0x100000001); case 2) min_t(size_t, 5, 0x100000001); Case 1 returns '1', where as case 2 returns '5'. As you can see the result from case 1 is wrong. This patch fixes the above issue by using the data type of the parameters that are used in min_t with maximum data length. Fixes: commit 1a4e53d2fc4f68aa ("spi: Fix invalid sgs value") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20220316175317.465-1-biju.das.jz@bp.renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-03-17spi: Get sgs size fix into branchMark Brown1-2/+2
Dependency for patch to be applied.
2022-03-16spi: tegra20: Use of_device_get_match_data()Minghao Chi1-7/+1
Use of_device_get_match_data() to simplify the code. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Link: https://lore.kernel.org/r/20220315023138.2118293-1-chi.minghao@zte.com.cn Signed-off-by: Mark Brown <broonie@kernel.org>
2022-03-15fix typos in commentsMark Brown1-1/+1
Merge series from Julia Lawall <Julia.Lawall@inria.fr>: Various spelling mistakes in comments. Detected with the help of Coccinelle. --- drivers/base/devres.c | 4 ++-- drivers/clk/qcom/gcc-sm6125.c | 2 +- drivers/clk/ti/clkctrl.c | 2 +- drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c | 4 ++-- drivers/gpu/drm/amd/display/dc/bios/command_table.c | 6 +++--- drivers/gpu/drm/amd/pm/amdgpu_pm.c | 2 +- drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 4 ++-- drivers/gpu/drm/sti/sti_gdp.c | 2 +- drivers/infiniband/hw/qib/qib_iba7220.c | 4 ++-- drivers/leds/leds-pca963x.c | 2 +- drivers/media/i2c/ov5695.c | 2 +- drivers/mfd/rohm-bd9576.c | 2 +- drivers/mtd/ubi/block.c | 2 +- drivers/net/can/usb/ucan.c | 4 ++-- drivers/net/ethernet/packetengines/yellowfin.c | 2 +- drivers/net/wireless/ath/ath6kl/htc_mbox.c | 2 +- drivers/net/wireless/cisco/airo.c | 2 +- drivers/net/wireless/mediatek/mt76/mt7915/init.c | 2 +- drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c | 6 +++--- drivers/platform/x86/uv_sysfs.c | 2 +- drivers/s390/crypto/pkey_api.c | 2 +- drivers/scsi/aic7xxx/aicasm/aicasm.c | 2 +- drivers/scsi/elx/libefc_sli/sli4.c | 2 +- drivers/scsi/lpfc/lpfc_mbox.c | 2 +- drivers/scsi/qla2xxx/qla_gs.c | 2 +- drivers/spi/spi-sun4i.c | 2 +- drivers/staging/rtl8723bs/core/rtw_mlme.c | 2 +- drivers/usb/gadget/udc/snps_udc_core.c | 2 +- fs/kernfs/file.c | 2 +- kernel/events/core.c | 2 +- 30 files changed, 39 insertions(+), 39 deletions(-)
2022-03-15spi: mediatek: add ipm design support for MT7986Leilk Liu1-15/+87
this patch add the support of ipm design. Signed-off-by: Leilk Liu <leilk.liu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220315032411.2826-4-leilk.liu@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-03-15spi: sun4i: fix typos in commentsJulia Lawall1-1/+1
Various spelling mistakes in comments. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Acked-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20220314115354.144023-22-Julia.Lawall@inria.fr Signed-off-by: Mark Brown <broonie@kernel.org>
2022-03-15spi: mediatek: support tick_delay without enhance_timingLeilk Liu1-3/+12
this patch support tick_delay bit[31:30] without enhance_timing feature. Fixes: f84d866ab43f("spi: mediatek: add tick_delay support") Signed-off-by: Leilk Liu <leilk.liu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220315032411.2826-2-leilk.liu@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-03-10spi: rockchip-sfc: fix platform_get_irq.cocci warningYihao Han1-3/+1
Remove dev_err() messages after platform_get_irq*() failures. platform_get_irq() already prints an error. Generated by: scripts/coccinelle/api/platform_get_irq.cocci Signed-off-by: Yihao Han <hanyihao@vivo.com> Link: https://lore.kernel.org/r/20220310094806.13734-1-hanyihao@vivo.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-03-10Merge tag 'spi-fix-v5.17-rc7' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fix from Mark Brown: "One fix for type conversion issues when working out maximum scatter/gather segment sizes. It caused problems for some systems where the limits overflow due to the type conversion" * tag 'spi-fix-v5.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: Fix invalid sgs value
2022-03-08spi: Tesla FSD supportMark Brown1-8/+19
Merge series from Alim Akhtar: This series adds support for the SPI controller in the Tesla FSD SoC, also pulling in: git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git ib-mfd-spi-dt-v5.18 from the MFD tree which has dependencies for the DT bindings.
2022-03-08spi: s3c64xx: Add spi port configuration for Tesla FSD SoCAlim Akhtar1-0/+13
Add compatible and port configuration for spi controller for Tesla Full Self-Driving SoC. Cc: linux-fsd@tesla.com Signed-off-by: Aswani Reddy <aswani.reddy@samsung.com> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Andi Shyti <andi@etezian.org> Link: https://lore.kernel.org/r/20220308121640.27344-2-alim.akhtar@samsung.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-03-08Tegra QUAD SPI combined sequence modeMark Brown1-16/+274
Merge series from Krishna Yarlagadda <kyarlagadda@nvidia.com>: Add ACPI support for Tegra210 QUAD SPI driver Support new Tegra194 feature, combined sequence mode.
2022-03-08spi: topcliff-pch: Prevent usage of potentially stale DMA deviceAndy Shevchenko1-2/+6
DMA device is expected to be available while SPI transfer is ongoing. Prevent usage of potentially stale DMA device by keeping reference count till the end of the transfer. Fixes: 4d986ffa036a ("spi: add missing pci_dev_put() before return") Reported-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220307173740.80996-1-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-03-08spi: tegra210-quad: combined sequence modeKrishna Yarlagadda1-5/+233
Add combined sequence mode supported by Tegra QSPI controller. For commands which contain cmd, addr, data parts to it, controller can accept all 3 transfers at once and avoid interrupt for each transfer. This would improve read & write performance. Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20220307165519.38380-3-kyarlagadda@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-03-08spi: tegra210-quad: add acpi supportKrishna Yarlagadda1-11/+41
Add ACPI ID for Tegra QUAD SPI. Switch to common device property calls. Skip clock calls that are not updated in ACPI boot. Runtime PM support is not yet enabled with ACPI boot. Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com> Link: https://lore.kernel.org/r/20220307165519.38380-2-kyarlagadda@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-03-08spi: Fix invalid sgs valueBiju Das1-2/+2
max_seg_size is unsigned int and it can have a value up to 2^32 (for eg:-RZ_DMAC driver sets dma_set_max_seg_size as U32_MAX) When this value is used in min_t() as an integer type, it becomes -1 and the value of sgs becomes 0. Fix this issue by replacing the 'int' data type with 'unsigned int' in min_t(). Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20220307184843.9994-1-biju.das.jz@bp.renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-03-07spi: npcm-fiu: Fix typo ("npxm")Jonathan Neuschäfer1-4/+4
The platform is called NPCM, not NPXM. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Link: https://lore.kernel.org/r/20220306142312.109017-1-j.neuschaefer@gmx.net Signed-off-by: Mark Brown <broonie@kernel.org>
2022-03-07spi: qup: replace spin_lock_irqsave by spin_lock in hard IRQXingbang Liu1-3/+2
The code has been in a irq-disabled context since it is hard IRQ. There is no necessity to do it again. Signed-off-by: Xingbang Liu <liu.airalert@gmail.com> Link: https://lore.kernel.org/r/20220302071521.6638-1-liu.airalert@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-03-07spi: cadence: fix platform_get_irq.cocci warningYihao Han1-3/+1
Remove dev_err() messages after platform_get_irq*() failures. platform_get_irq() already prints an error. Generated by: scripts/coccinelle/api/platform_get_irq.cocci Signed-off-by: Yihao Han <hanyihao@vivo.com> Link: https://lore.kernel.org/r/20220303125054.3574-1-hanyihao@vivo.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-03-07spi: s3c64xx: Allow controller-data to be optionalKrzysztof Kozlowski1-8/+6
The Samsung SoC SPI driver requires to provide controller-data node for each of SPI peripheral device nodes. Make this controller-data node optional, so DTS could be simpler. Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Andi Shyti <andi@etezian.org> Reviwed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220124082347.32747-5-krzysztof.kozlowski@canonical.com
2022-03-03spi: Use of_device_get_match_data()Minghao Chi (CGEL ZTE)1-4/+2
Use of_device_get_match_data() to simplify the code. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn> Link: https://lore.kernel.org/r/20220303092131.2060044-1-chi.minghao@zte.com.cn Signed-off-by: Mark Brown <broonie@kernel.org>
2022-03-02spi: spi-zynqmp-gqspi: Handle error for dma_set_maskJiasheng Jiang1-1/+4
As the potential failure of the dma_set_mask(), it should be better to check it and return error if fails. Fixes: 126bdb606fd2 ("spi: spi-zynqmp-gqspi: return -ENOMEM if dma_map_single fails") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Link: https://lore.kernel.org/r/20220302092051.121343-1-jiasheng@iscas.ac.cn Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-28spi: use specific last_cs instead of last_cs_enableYun Zhou1-2/+6
Commit d40f0b6f2e21 instroduced last_cs_enable to avoid setting chipselect if it's not necessary, but it also introduces a bug. The chipselect may not be set correctly on multi-device SPI busses. The reason is that we can't judge the chipselect by bool last_cs_enable, since chipselect may be modified after other devices were accessed. So we should record the specific state of chipselect in case of confusion. Signed-off-by: Yun Zhou <yun.zhou@windriver.com> Link: https://lore.kernel.org/r/20220217141234.72737-1-yun.zhou@windriver.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-28spi: pxa2xx-pci: Constify struct pxa_spi_info variablesAndy Shevchenko1-5/+5
Now when there are no dynamical changes required, we may constify struct pxa_spi_info variables. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220225172350.69797-11-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-28spi: pxa2xx-pci: Drop temporary storage use for a handful of membersAndy Shevchenko1-61/+49
Instead of using temporary storage, assign the values directly to the corresponding struct pxa2xx_spi_controller members. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220225172350.69797-10-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-28spi: pxa2xx-pci: Extract pxa2xx_spi_pci_clk_register()Andy Shevchenko1-13/+22
Extract pxa2xx_spi_pci_clk_register() from ->probe() in order to reuse it later on for getting rid of max_clk_rate temporary storage. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220225172350.69797-9-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-28spi: pxa2xx-pci: Drop unneeded checks in lpss_spi_setup()Andy Shevchenko1-14/+9
All of the LPSS devices are using DMA and set the parameters up, hence no need to test for that. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220225172350.69797-8-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-28spi: pxa2xx-pci: Replace enum with direct use of PCI IDsAndy Shevchenko1-78/+83
Instead of creating an abstraction on top of PCI IDs, just use them directly. The corresponding enum can be dropped. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220225172350.69797-7-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-28spi: pxa2xx-pci: Move max_clk_rate assignment to ->setup()Andy Shevchenko1-1/+2
Move max_clk_rate to the corresponding ->setup() function to unify with the rest. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220225172350.69797-6-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-28spi: pxa2xx-pci: Move dma_burst_size assignment to ->setup()Andy Shevchenko1-2/+3
Instead of using conditional, move dma_burst_size to the corresponding ->setup() function. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220225172350.69797-5-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-28spi: pxa2xx-pci: Move port_id assignment to ->setup()Andy Shevchenko1-4/+4
Instead of using conditional, move port_id to the corresponding ->setup() functions. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220225172350.69797-4-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-28spi: pxa2xx-pci: Drop redundant NULL check in ->probe()Andy Shevchenko1-5/+3
Since all platforms are using ->setup() function, drop unneeded check. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220225172350.69797-3-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-28spi: pxa2xx-pci: Refactor Quark X1000 to use ->setup()Andy Shevchenko1-2/+9
Refactor Quark X1000 handling code to use ->setup() instead of using the configuration data structure directly. It will allow to refactor further to avoid intermediate storage for the used configuration parameters. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220225172350.69797-2-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-28spi: pxa2xx-pci: Refactor CE4100 to use ->setup()Andy Shevchenko1-4/+11
Refactor CE4100 handling code to use ->setup() instead of spreading potentially confusing conditional. Besides that, it will allow to refactor further to avoid intermediate storage for the used configuration parameters. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220225172350.69797-1-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-25Merge tag 'spi-fix-v5.17-rc5' of ↵Linus Torvalds2-3/+13
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A few small driver specific fixes" * tag 'spi-fix-v5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: rockchip: terminate dma transmission when slave abort spi: rockchip: Fix error in getting num-cs property spi: spi-zynq-qspi: Fix a NULL pointer dereference in zynq_qspi_exec_mem_op()
2022-02-24Tegra QUAD SPI ACPI & device supportMark Brown1-17/+34
Merge series from Krishna Yarlagadda <kyarlagadda@nvidia.com>: Add ACPI support for Tegra210 QUAD SPI driver and a new compatilbe.
2022-02-24spi: tegra210-quad: add new chips to compatibleKrishna Yarlagadda1-3/+30
Add support for Tegra234 and soc data to select capabilities. Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com> Link: https://lore.kernel.org/r/20220222175611.58051-4-kyarlagadda@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-24spi: tegra210-quad: use device_reset methodKrishna Yarlagadda1-14/+4
Use device_reset api to replace duplicate code in driver to call reset_control_get api with reset handle. Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com> Link: https://lore.kernel.org/r/20220222175611.58051-2-kyarlagadda@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-24spi: pxa2xx-pci: Balance reference count for PCI DMA deviceAndy Shevchenko1-1/+16
The pci_get_slot() increases its reference count, the caller must decrement the reference count by calling pci_dev_put(). Fixes: 743485ea3bee ("spi: pxa2xx-pci: Do a specific setup in a separate function") Fixes: 25014521603f ("spi: pxa2xx-pci: Enable DMA for Intel Merrifield") Reported-by: Wang Qing <wangqing@vivo.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220223191637.31147-1-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-24spi: pxa2xx-pci: Do not dereference fwnode in struct deviceAndy Shevchenko1-1/+1
In order to make the underneath API easier to change in the future, prevent users from dereferencing fwnode from struct device. Instead, use the specific dev_fwnode() API for that. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220223191948.31325-1-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-23spi: add missing pci_dev_put() before returnWang Qing1-2/+5
pci_get_slot() increases its reference count, the caller must decrement the reference count by calling pci_dev_put() Signed-off-by: Wang Qing <wangqing@vivo.com> Link: https://lore.kernel.org/r/1644890407-65167-1-git-send-email-wangqing@vivo.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-22spi: gpio: Implement LSB First bitbang supportAndreas Färber2-9/+99
Add support for slave DT property spi-lsb-first, i.e., SPI_LSB_FIRST mode. Duplicate the inline helpers bitbang_txrx_be_cpha{0,1} as LE versions. Conditionally call them from all the spi-gpio txrx_word callbacks. Some alternatives to this implementation approach were discussed back then [0], but eventually it was considered reasonable. [0] https://lore.kernel.org/linux-arm-kernel/20191212033952.5967-8-afaerber@suse.de/ Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Tested-by: Christian Hewitt <christianshewitt@gmail.com> Link: https://lore.kernel.org/r/feac3377-4ad1-77d8-9a18-3588d80fb909@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-22spi: stm32: ignore Rx queue not empty in stm32f4 Tx only modeAhmad Fatoum1-1/+1
STM32F4_SPI_SR_RXNE and STM32F4_SPI_SR_OVR are distinct bits in the same status register. ~STM32F4_SPI_SR_OVR | STM32F4_SPI_SR_RXNE is thus equal to ~STM32F4_SPI_SR_OVR. The original intention was likely for transmission-only transfers to ignore interrupts both for when the Rx queue has bytes (RXNE) as well as when these bytes haven't been read in time (OVR). Fix the typo by adding the missing parenthesis. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://lore.kernel.org/r/20220201115142.3999860-1-a.fatoum@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-21spi: Use of_device_get_match_data()Minghao Chi (CGEL ZTE)1-7/+1
Use of_device_get_match_data() to simplify the code. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn> Link: https://lore.kernel.org/r/20220221020233.1925154-1-chi.minghao@zte.com.cn Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-18spi: use sysfs_emit() for printing statistics and add trailing newlineHeiner Kallweit1-1/+1
Use dedicated function sysfs_emit() that does some extra checking, e.g. to ensure that no more than PAGESIZE bytes are written. In addition add a trailing newline to the output, that makes it better readable from the console. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/56e1588d-d53b-73e9-fdc8-7fe30bf91f11@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-18spi: clean up some inconsistent indentingYang Li1-2/+2
Eliminate the follow smatch warning: drivers/spi/spi-sunplus-sp7021.c:379 sp7021_spi_slave_transfer_one() warn: inconsistent indenting Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/20220217010024.111904-1-yang.lee@linux.alibaba.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-17spi: New support and problem adjustment of SPI rockchipMark Brown6-23/+142
Merge series from Jon Lin <jon.lin@rock-chips.com>: A collection of fixes and support for new features in the Rockchip driver. base-commit: 80808768e41324d2e23de89972b5406c1020e6e4
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 07:57:44 +0000