summaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)AuthorFilesLines
2024-11-08scsi: scsi_transport_fc: Allow setting rport state to current stateBenjamin Marzinski1-2/+2
[ Upstream commit d539a871ae47a1f27a609a62e06093fa69d7ce99 ] The only input fc_rport_set_marginal_state() currently accepts is "Marginal" when port_state is "Online", and "Online" when the port_state is "Marginal". It should also allow setting port_state to its current state, either "Marginal or "Online". Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Link: https://lore.kernel.org/r/20240917230643.966768-1-bmarzins@redhat.com Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-17scsi: Revert "scsi: sd: Do not repeat the starting disk message"Johan Hovold1-2/+3
commit da3e19ef0b3de0aa4b25595bdc214c02a04f19b8 upstream. This reverts commit 7a6bbc2829d4ab592c7e440a6f6f5deb3cd95db4. The offending commit tried to suppress a double "Starting disk" message for some drivers, but instead started spamming the log with bogus messages every five seconds: [ 311.798956] sd 0:0:0:0: [sda] Starting disk [ 316.919103] sd 0:0:0:0: [sda] Starting disk [ 322.040775] sd 0:0:0:0: [sda] Starting disk [ 327.161140] sd 0:0:0:0: [sda] Starting disk [ 332.281352] sd 0:0:0:0: [sda] Starting disk [ 337.401878] sd 0:0:0:0: [sda] Starting disk [ 342.521527] sd 0:0:0:0: [sda] Starting disk [ 345.850401] sd 0:0:0:0: [sda] Starting disk [ 350.967132] sd 0:0:0:0: [sda] Starting disk [ 356.090454] sd 0:0:0:0: [sda] Starting disk ... on machines that do not actually stop the disk on runtime suspend (e.g. the Qualcomm sc8280xp CRD with UFS). Let's just revert for now to address the regression. Fixes: 7a6bbc2829d4 ("scsi: sd: Do not repeat the starting disk message") Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20240716161101.30692-1-johan+linaro@kernel.org Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-17scsi: wd33c93: Don't use stale scsi_pointer valueDaniel Palmer1-1/+1
commit 9023ed8d91eb1fcc93e64dc4962f7412b1c4cbec upstream. A regression was introduced with commit dbb2da557a6a ("scsi: wd33c93: Move the SCSI pointer to private command data") which results in an oops in wd33c93_intr(). That commit added the scsi_pointer variable and initialized it from hostdata->connected. However, during selection, hostdata->connected is not yet valid. Fix this by getting the current scsi_pointer from hostdata->selecting. Cc: Daniel Palmer <daniel@0x0f.com> Cc: Michael Schmitz <schmitzmic@gmail.com> Cc: stable@kernel.org Fixes: dbb2da557a6a ("scsi: wd33c93: Move the SCSI pointer to private command data") Signed-off-by: Daniel Palmer <daniel@0x0f.com> Co-developed-by: Finn Thain <fthain@linux-m68k.org> Signed-off-by: Finn Thain <fthain@linux-m68k.org> Link: https://lore.kernel.org/r/09e11a0a54e6aa2a88bd214526d305aaf018f523.1727926187.git.fthain@linux-m68k.org Reviewed-by: Michael Schmitz <schmitzmic@gmail.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-17scsi: lpfc: Ensure DA_ID handling completion before deleting an NPIV instanceJustin Tee3-7/+55
[ Upstream commit 0a3c84f71680684c1d41abb92db05f95c09111e8 ] Deleting an NPIV instance requires all fabric ndlps to be released before an NPIV's resources can be torn down. Failure to release fabric ndlps beforehand opens kref imbalance race conditions. Fix by forcing the DA_ID to complete synchronously with usage of wait_queue. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240912232447.45607-6-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-17scsi: lpfc: Add ELS_RSP cmd to the list of WQEs to flush in lpfc_els_flush_cmd()Justin Tee1-3/+4
[ Upstream commit 93bcc5f3984bf4f51da1529700aec351872dbfff ] During HBA stress testing, a spam of received PLOGIs exposes a resource recovery bug causing leakage of lpfc_sqlq entries from the global phba->sli4_hba.lpfc_els_sgl_list. The issue is in lpfc_els_flush_cmd(), where the driver attempts to recover outstanding ELS sgls when walking the txcmplq. Only CMD_ELS_REQUEST64_CRs and CMD_GEN_REQUEST64_CRs are added to the abort and cancel lists. A check for CMD_XMIT_ELS_RSP64_WQE is missing in order to recover LS_ACC usages of the phba->sli4_hba.lpfc_els_sgl_list too. Fix by adding CMD_XMIT_ELS_RSP64_WQE as part of the txcmplq walk when adding WQEs to the abort and cancel list in lpfc_els_flush_cmd(). Also, update naming convention from CRs to WQEs. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240912232447.45607-2-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-17scsi: sd: Do not repeat the starting disk messageDamien Le Moal1-3/+2
[ Upstream commit 7a6bbc2829d4ab592c7e440a6f6f5deb3cd95db4 ] The SCSI disk message "Starting disk" to signal resuming of a suspended disk is printed in both sd_resume() and sd_resume_common() which results in this message being printed twice when resuming from e.g. autosuspend: $ echo 5000 > /sys/block/sda/device/power/autosuspend_delay_ms $ echo auto > /sys/block/sda/device/power/control [ 4962.438293] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 4962.501121] sd 0:0:0:0: [sda] Stopping disk $ echo on > /sys/block/sda/device/power/control [ 4972.805851] sd 0:0:0:0: [sda] Starting disk [ 4980.558806] sd 0:0:0:0: [sda] Starting disk Fix this double print by removing the call to sd_printk() from sd_resume() and moving the call to sd_printk() in sd_resume_common() earlier in the function, before the check using sd_do_start_stop(). Doing so, the message is printed once regardless if sd_resume_common() actually executes sd_start_stop_device() (i.e. SCSI device case) or not (libsas and libata managed ATA devices case). Fixes: 0c76106cb975 ("scsi: sd: Fix TCG OPAL unlock on system resume") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20240701215326.128067-1-dlemoal@kernel.org Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-17scsi: Remove scsi device no_start_on_resume flagDamien Le Moal1-6/+3
[ Upstream commit c4367ac83805a2322268c9736cd8ef9124063424 ] The scsi device flag no_start_on_resume is not set by any scsi low level driver. Remove it. This reverts the changes introduced by commit 0a8589055936 ("ata,scsi: do not issue START STOP UNIT on resume"). Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Stable-dep-of: 7a6bbc2829d4 ("scsi: sd: Do not repeat the starting disk message") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-10scsi: NCR5380: Initialize buffer for MSG IN and STATUS transfersFinn Thain1-0/+4
[ Upstream commit 1c71065df2df693d208dd32758171c1dece66341 ] Following an incomplete transfer in MSG IN phase, the driver would not notice the problem and would make use of invalid data. Initialize 'tmp' appropriately and bail out if no message was received. For STATUS phase, preserve the existing status code unless a new value was transferred. Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@linux-m68k.org> Link: https://lore.kernel.org/r/52e02a8812ae1a2d810d7f9f7fd800c3ccc320c4.1723001788.git.fthain@linux-m68k.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-10scsi: lpfc: Update PRLO handling in direct attached topologyJustin Tee2-13/+36
[ Upstream commit 1f0f7679ad8942f810b0f19ee9cf098c3502d66a ] A kref imbalance occurs when handling an unsolicited PRLO in direct attached topology. Rework PRLO rcv handling when in MAPPED state. Save the state that we were handling a PRLO by setting nlp_last_elscmd to ELS_CMD_PRLO. Then in the lpfc_cmpl_els_logo_acc() completion routine, manually restart discovery. By issuing the PLOGI, which nlp_gets, before nlp_put at the end of the lpfc_cmpl_els_logo_acc() routine, we are saving us from a final nlp_put. And, we are still allowing the unreg_rpi to happen. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240726231512.92867-7-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-10scsi: aacraid: Rearrange order of struct aac_srb_unitKees Cook1-1/+1
[ Upstream commit 6e5860b0ad4934baee8c7a202c02033b2631bb44 ] struct aac_srb_unit contains struct aac_srb, which contains struct sgmap, which ends in a (currently) "fake" (1-element) flexible array. Converting this to a flexible array is needed so that runtime bounds checking won't think the array is fixed size (i.e. under CONFIG_FORTIFY_SOURCE=y and/or CONFIG_UBSAN_BOUNDS=y), as other parts of aacraid use struct sgmap as a flexible array. It is not legal to have a flexible array in the middle of a structure, so it either needs to be split up or rearranged so that it is at the end of the structure. Luckily, struct aac_srb_unit, which is exclusively consumed/updated by aac_send_safw_bmic_cmd(), does not depend on member ordering. The values set in the on-stack struct aac_srb_unit instance "srbu" by the only two callers, aac_issue_safw_bmic_identify() and aac_get_safw_ciss_luns(), do not contain anything in srbu.srb.sgmap.sg, and they both implicitly initialize srbu.srb.sgmap.count to 0 during memset(). For example: memset(&srbu, 0, sizeof(struct aac_srb_unit)); srbcmd = &srbu.srb; srbcmd->flags = cpu_to_le32(SRB_DataIn); srbcmd->cdb[0] = CISS_REPORT_PHYSICAL_LUNS; srbcmd->cdb[1] = 2; /* extended reporting */ srbcmd->cdb[8] = (u8)(datasize >> 8); srbcmd->cdb[9] = (u8)(datasize); rcode = aac_send_safw_bmic_cmd(dev, &srbu, phys_luns, datasize); During aac_send_safw_bmic_cmd(), a separate srb is mapped into DMA, and has srbu.srb copied into it: srb = fib_data(fibptr); memcpy(srb, &srbu->srb, sizeof(struct aac_srb)); Only then is srb.sgmap.count written and srb->sg populated: srb->count = cpu_to_le32(xfer_len); sg64 = (struct sgmap64 *)&srb->sg; sg64->count = cpu_to_le32(1); sg64->sg[0].addr[1] = cpu_to_le32(upper_32_bits(addr)); sg64->sg[0].addr[0] = cpu_to_le32(lower_32_bits(addr)); sg64->sg[0].count = cpu_to_le32(xfer_len); But this is happening in the DMA memory, not in srbu.srb. An attempt to copy the changes back to srbu does happen: /* * Copy the updated data for other dumping or other usage if * needed */ memcpy(&srbu->srb, srb, sizeof(struct aac_srb)); But this was never correct: the sg64 (3 u32s) overlap of srb.sg (2 u32s) always meant that srbu.srb would have held truncated information and any attempt to walk srbu.srb.sg.sg based on the value of srbu.srb.sg.count would result in attempting to parse past the end of srbu.srb.sg.sg[0] into srbu.srb_reply. After getting a reply from hardware, the reply is copied into srbu.srb_reply: srb_reply = (struct aac_srb_reply *)fib_data(fibptr); memcpy(&srbu->srb_reply, srb_reply, sizeof(struct aac_srb_reply)); This has always been fixed-size, so there's no issue here. It is worth noting that the two callers _never check_ srbu contents -- neither srbu.srb nor srbu.srb_reply is examined. (They depend on the mapped xfer_buf instead.) Therefore, the ordering of members in struct aac_srb_unit does not matter, and the flexible array member can moved to the end. (Additionally, the two memcpy()s that update srbu could be entirely removed as they are never consumed, but I left that as-is.) Signed-off-by: Kees Cook <kees@kernel.org> Link: https://lore.kernel.org/r/20240711215739.208776-1-kees@kernel.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-10scsi: smartpqi: correct stream detectionMahesh Rajashekhara1-1/+1
[ Upstream commit 4c76114932d1d6fad2e72823e7898a3c960cf2a7 ] Correct stream detection by initializing the structure pqi_scsi_dev_raid_map_data to 0s. When the OS issues SCSI READ commands, the driver erroneously considers them as SCSI WRITES. If they are identified as sequential IOs, the driver then submits those requests via the RAID path instead of the AIO path. The 'is_write' flag might be set for SCSI READ commands also. The driver may interpret SCSI READ commands as SCSI WRITE commands, resulting in IOs being submitted through the RAID path. Note: This does not cause data corruption. Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Link: https://lore.kernel.org/r/20240827185501.692804-3-don.brace@microchip.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-10scsi: pm8001: Do not overwrite PCI queue mappingDaniel Wagner1-2/+4
[ Upstream commit a141c17a543332fc1238eb5cba562bfc66879126 ] blk_mq_pci_map_queues() maps all queues but right after this, we overwrite these mappings by calling blk_mq_map_queues(). Just use one helper but not both. Fixes: 42f22fe36d51 ("scsi: pm8001: Expose hardware queues for pm80xx") Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Daniel Wagner <dwagner@suse.de> Link: https://lore.kernel.org/r/20240912-do-not-overwrite-pci-mapping-v1-1-85724b6cec49@suse.de Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-10scsi: st: Fix input/output error on empty drive resetRafael Rocha1-2/+3
[ Upstream commit 3d882cca73be830549833517ddccb3ac4668c04e ] A previous change was introduced to prevent data loss during a power-on reset when a tape is present inside the drive. This commit set the "pos_unknown" flag to true to avoid operations that could compromise data by performing actions from an untracked position. The relevant change is commit 9604eea5bd3a ("scsi: st: Add third party poweron reset handling") As a consequence of this change, a new issue has surfaced: the driver now returns an "Input/output error" even for empty drives when the drive, host, or bus is reset. This issue stems from the "flush_buffer" function, which first checks whether the "pos_unknown" flag is set. If the flag is set, the user will encounter an "Input/output error" until the tape position is known again. This behavior differs from the previous implementation, where empty drives were not affected at system start up time, allowing tape software to send commands to the driver to retrieve the drive's status and other information. The current behavior prioritizes the "pos_unknown" flag over the "ST_NO_TAPE" status, leading to issues for software that detects drives during system startup. This software will receive an "Input/output error" until a tape is loaded and its position is known. To resolve this, the "ST_NO_TAPE" status should take priority when the drive is empty, allowing communication with the drive following a power-on reset. At the same time, the change should continue to protect data by maintaining the "pos_unknown" flag when the drive contains a tape and its position is unknown. Signed-off-by: Rafael Rocha <rrochavi@fnal.gov> Link: https://lore.kernel.org/r/20240905173921.10944-1-rrochavi@fnal.gov Fixes: 9604eea5bd3a ("scsi: st: Add third party poweron reset handling") Acked-by: Kai Mäkisara <kai.makisara@kolumbus.fi> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-04scsi: mac_scsi: Disallow bus errors during PDMA sendFinn Thain1-25/+19
commit 5551bc30e4a69ad86d0d008e2f56cd59b6583476 upstream. SD cards can produce write latency spikes on the order of a hundred milliseconds. If the target firmware does not hide that latency during DATA IN and OUT phases it can cause the PDMA circuitry to raise a processor bus fault which in turn leads to an unreliable byte count and a DMA overrun. The Last Byte Sent flag is used to detect the overrun but this mechanism is unreliable on some systems. Instead, set a DID_ERROR result whenever there is a bus fault during a PDMA send, unless the cause was a phase mismatch. Cc: stable@vger.kernel.org # 5.15+ Reported-and-tested-by: Stan Johnson <userm57@yahoo.com> Fixes: 7c1f3e3447a1 ("scsi: mac_scsi: Treat Last Byte Sent time-out as failure") Signed-off-by: Finn Thain <fthain@linux-m68k.org> Link: https://lore.kernel.org/r/cc38df687ace2c4ffc375a683b2502fc476b600d.1723001788.git.fthain@linux-m68k.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-04scsi: mac_scsi: Refactor polling loopFinn Thain1-38/+42
commit 5545c3165cbc98615fe65a44f41167cbb557e410 upstream. Before the error handling can be revised, some preparation is needed. Refactor the polling loop with a new function, macscsi_wait_for_drq(). This function will gain more call sites in the next patch. Cc: stable@vger.kernel.org # 5.15+ Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@linux-m68k.org> Link: https://lore.kernel.org/r/6a5ffabb4290c0d138c6d285fda8fa3902e926f0.1723001788.git.fthain@linux-m68k.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-04scsi: mac_scsi: Revise printk(KERN_DEBUG ...) messagesFinn Thain1-20/+22
commit 5ec4f820cb9766e4583df947150a6febce8da794 upstream. After a bus fault, capture and log the chip registers immediately, if the NDEBUG_PSEUDO_DMA macro is defined. Remove some printk(KERN_DEBUG ...) messages that aren't needed any more. Don't skip the debug message when bytes == 0. Show all of the byte counters in the debug messages. Cc: stable@vger.kernel.org # 5.15+ Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@linux-m68k.org> Link: https://lore.kernel.org/r/7573c79f4e488fc00af2b8a191e257ca945e0409.1723001788.git.fthain@linux-m68k.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-04scsi: sd: Fix off-by-one error in sd_read_block_characteristics()Martin Wilck1-1/+1
commit f81eaf08385ddd474a2f41595a7757502870c0eb upstream. Ff the device returns page 0xb1 with length 8 (happens with qemu v2.x, for example), sd_read_block_characteristics() may attempt an out-of-bounds memory access when accessing the zoned field at offset 8. Fixes: 7fb019c46eee ("scsi: sd: Switch to using scsi_device VPD pages") Cc: stable@vger.kernel.org Signed-off-by: Martin Wilck <mwilck@suse.com> Link: https://lore.kernel.org/r/20240912134308.282824-1-mwilck@suse.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-04scsi: elx: libefc: Fix potential use after free in efc_nport_vport_del()Dan Carpenter1-1/+1
[ Upstream commit 2e4b02fad094976763af08fec2c620f4f8edd9ae ] The kref_put() function will call nport->release if the refcount drops to zero. The nport->release release function is _efc_nport_free() which frees "nport". But then we dereference "nport" on the next line which is a use after free. Re-order these lines to avoid the use after free. Fixes: fcd427303eb9 ("scsi: elx: libefc: SLI and FC PORT state machine interfaces") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/b666ab26-6581-4213-9a3d-32a9147f0399@stanley.mountain Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-04scsi: NCR5380: Check for phase match during PDMA fixupFinn Thain1-39/+39
[ Upstream commit 5768718da9417331803fc4bc090544c2a93b88dc ] It's not an error for a target to change the bus phase during a transfer. Unfortunately, the FLAG_DMA_FIXUP workaround does not allow for that -- a phase change produces a DRQ timeout error and the device borken flag will be set. Check the phase match bit during FLAG_DMA_FIXUP processing. Don't forget to decrement the command residual. While we are here, change shost_printk() into scmd_printk() for better consistency with other DMA error messages. Tested-by: Stan Johnson <userm57@yahoo.com> Fixes: 55181be8ced1 ("ncr5380: Replace redundant flags with FLAG_NO_DMA_FIXUP") Signed-off-by: Finn Thain <fthain@linux-m68k.org> Link: https://lore.kernel.org/r/99dc7d1f4c825621b5b120963a69f6cd3e9ca659.1723001788.git.fthain@linux-m68k.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-04scsi: smartpqi: revert propagate-the-multipath-failure-to-SML-quicklyGilbert Wu1-18/+2
[ Upstream commit f1393d52e6cda9c20f12643cbecf1e1dc357e0e2 ] Correct a rare multipath failure issue by reverting commit 94a68c814328 ("scsi: smartpqi: Quickly propagate path failures to SCSI midlayer") [1]. Reason for revert: The patch propagated the path failure to SML quickly when one of the path fails during IO and AIO path gets disabled for a multipath device. But it created a new issue: when creating a volume on an encryption-enabled controller, the firmware reports the AIO path is disabled, which cause the driver to report a path failure to SML for a multipath device. There will be a new fix to handle "Illegal request" and "Invalid field in parameter list" on RAID path when the AIO path is disabled on a multipath device. [1] https://lore.kernel.org/all/164375209313.440833.9992416628621839233.stgit@brunhilda.pdev.net/ Fixes: 94a68c814328 ("scsi: smartpqi: Quickly propagate path failures to SCSI midlayer") Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Signed-off-by: Gilbert Wu <Gilbert.Wu@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Link: https://lore.kernel.org/r/20240711194704.982400-4-don.brace@microchip.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-30scsi: lpfc: Fix overflow build issueSherry Yang1-1/+1
[ Upstream commit 3417c9574e368f0330637505f00d3814ca8854d2 ] Build failed while enabling "CONFIG_GCOV_KERNEL=y" and "CONFIG_GCOV_PROFILE_ALL=y" with following error: BUILDSTDERR: drivers/scsi/lpfc/lpfc_bsg.c: In function 'lpfc_get_cgnbuf_info': BUILDSTDERR: ./include/linux/fortify-string.h:114:33: error: '__builtin_memcpy' accessing 18446744073709551615 bytes at offsets 0 and 0 overlaps 9223372036854775807 bytes at offset -9223372036854775808 [-Werror=restrict] BUILDSTDERR: 114 | #define __underlying_memcpy __builtin_memcpy BUILDSTDERR: | ^ BUILDSTDERR: ./include/linux/fortify-string.h:637:9: note: in expansion of macro '__underlying_memcpy' BUILDSTDERR: 637 | __underlying_##op(p, q, __fortify_size); \ BUILDSTDERR: | ^~~~~~~~~~~~~ BUILDSTDERR: ./include/linux/fortify-string.h:682:26: note: in expansion of macro '__fortify_memcpy_chk' BUILDSTDERR: 682 | #define memcpy(p, q, s) __fortify_memcpy_chk(p, q, s, \ BUILDSTDERR: | ^~~~~~~~~~~~~~~~~~~~ BUILDSTDERR: drivers/scsi/lpfc/lpfc_bsg.c:5468:9: note: in expansion of macro 'memcpy' BUILDSTDERR: 5468 | memcpy(cgn_buff, cp, cinfosz); BUILDSTDERR: | ^~~~~~ This happens from the commit 06bb7fc0feee ("kbuild: turn on -Wrestrict by default"). Address this issue by using size_t type. Signed-off-by: Sherry Yang <sherry.yang@oracle.com> Link: https://lore.kernel.org/r/20240821065131.1180791-1-sherry.yang@oracle.com Reviewed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12scsi: pm80xx: Set phy->enable_completion only when we wait for itIgor Pylypiv1-1/+3
[ Upstream commit e4f949ef1516c0d74745ee54a0f4882c1f6c7aea ] pm8001_phy_control() populates the enable_completion pointer with a stack address, sends a PHY_LINK_RESET / PHY_HARD_RESET, waits 300 ms, and returns. The problem arises when a phy control response comes late. After 300 ms the pm8001_phy_control() function returns and the passed enable_completion stack address is no longer valid. Late phy control response invokes complete() on a dangling enable_completion pointer which leads to a kernel crash. Signed-off-by: Igor Pylypiv <ipylypiv@google.com> Signed-off-by: Terrence Adams <tadamsjr@google.com> Link: https://lore.kernel.org/r/20240627155924.2361370-2-tadamsjr@google.com Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04scsi: aacraid: Fix double-free on probe failureBen Hutchings1-0/+2
[ Upstream commit 919ddf8336f0b84c0453bac583808c9f165a85c2 ] aac_probe_one() calls hardware-specific init functions through the aac_driver_ident::init pointer, all of which eventually call down to aac_init_adapter(). If aac_init_adapter() fails after allocating memory for aac_dev::queues, it frees the memory but does not clear that member. After the hardware-specific init function returns an error, aac_probe_one() goes down an error path that frees the memory pointed to by aac_dev::queues, resulting.in a double-free. Reported-by: Michael Gordon <m.gordon.zelenoborsky@gmail.com> Link: https://bugs.debian.org/1075855 Fixes: 8e0c5ebde82b ("[SCSI] aacraid: Newer adapter communication iterface support") Signed-off-by: Ben Hutchings <benh@debian.org> Link: https://lore.kernel.org/r/ZsZvfqlQMveoL5KQ@decadent.org.uk Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04scsi: sd: Ignore command SYNCHRONIZE CACHE error if format in progressYihang Li1-5/+7
commit 4f9eedfa27ae5806ed10906bcceee7bae49c8941 upstream. If formatting a suspended disk (such as formatting with different DIF type), the disk will be resuming first, and then the format command will submit to the disk through SG_IO ioctl. When the disk is processing the format command, the system does not submit other commands to the disk. Therefore, the system attempts to suspend the disk again and sends the SYNCHRONIZE CACHE command. However, the SYNCHRONIZE CACHE command will fail because the disk is in the formatting process. This will cause the runtime_status of the disk to error and it is difficult for user to recover it. Error info like: [ 669.925325] sd 6:0:6:0: [sdg] Synchronizing SCSI cache [ 670.202371] sd 6:0:6:0: [sdg] Synchronize Cache(10) failed: Result: hostbyte=0x00 driverbyte=DRIVER_OK [ 670.216300] sd 6:0:6:0: [sdg] Sense Key : 0x2 [current] [ 670.221860] sd 6:0:6:0: [sdg] ASC=0x4 ASCQ=0x4 To solve the issue, ignore the error and return success/0 when format is in progress. Cc: stable@vger.kernel.org Signed-off-by: Yihang Li <liyihang9@huawei.com> Link: https://lore.kernel.org/r/20240819090934.2130592-1-liyihang9@huawei.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-29scsi: lpfc: Initialize status local variable in lpfc_sli4_repost_sgl_list()Justin Tee1-1/+1
[ Upstream commit 3d0f9342ae200aa1ddc4d6e7a573c6f8f068d994 ] A static code analyzer tool indicates that the local variable called status in the lpfc_sli4_repost_sgl_list() routine could be used to print garbage uninitialized values in the routine's log message. Fix by initializing to zero. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240131185112.149731-2-justintee8345@gmail.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-29scsi: spi: Fix sshdr useMike Christie1-2/+2
[ Upstream commit 0b149cee836aa53989ea089af1cb9d90d7c6ac9e ] If scsi_execute_cmd returns < 0, it doesn't initialize the sshdr, so we shouldn't access the sshdr. If it returns 0, then the cmd executed successfully, so there is no need to check the sshdr. This has us access the sshdr when we get a return value > 0. Signed-off-by: Mike Christie <michael.christie@oracle.com> Link: https://lore.kernel.org/r/20231004210013.5601-7-michael.christie@oracle.com Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-14scsi: mpi3mr: Avoid IOMMU page faults on REPORT ZONESDamien Le Moal1-0/+11
commit 1abc900ddda8ad2ef739fedf498d415655b6c3b8 upstream. Some firmware versions of the 9600 series SAS HBA byte-swap the REPORT ZONES command reply buffer from ATA-ZAC devices by directly accessing the buffer in the host memory. This does not respect the default command DMA direction and causes IOMMU page faults on architectures with an IOMMU enforcing write-only mappings for DMA_FROM_DEVICE DMA direction (e.g. AMD hosts), leading to the device capacity to be dropped to 0: scsi 18:0:58:0: Direct-Access-ZBC ATA WDC WSH722626AL W930 PQ: 0 ANSI: 7 scsi 18:0:58:0: Power-on or device reset occurred sd 18:0:58:0: Attached scsi generic sg9 type 20 sd 18:0:58:0: [sdj] Host-managed zoned block device mpi3mr 0000:c1:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0001 address=0xfec0c400 flags=0x0050] mpi3mr 0000:c1:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0001 address=0xfec0c500 flags=0x0050] sd 18:0:58:0: [sdj] REPORT ZONES start lba 0 failed sd 18:0:58:0: [sdj] REPORT ZONES: Result: hostbyte=DID_SOFT_ERROR driverbyte=DRIVER_OK sd 18:0:58:0: [sdj] 0 4096-byte logical blocks: (0 B/0 B) sd 18:0:58:0: [sdj] Write Protect is off sd 18:0:58:0: [sdj] Mode Sense: 6b 00 10 08 sd 18:0:58:0: [sdj] Write cache: enabled, read cache: enabled, supports DPO and FUA sd 18:0:58:0: [sdj] Attached SCSI disk Avoid this issue by always mapping the buffer of REPORT ZONES commands using DMA_BIDIRECTIONAL, that is, using a read-write IOMMU mapping. Suggested-by: Christoph Hellwig <hch@lst.de> Fixes: 023ab2a9b4ed ("scsi: mpi3mr: Add support for queue command processing") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20240719073913.179559-2-dlemoal@kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-14scsi: mpt3sas: Avoid IOMMU page faults on REPORT ZONESDamien Le Moal1-2/+18
commit 82dbb57ac8d06dfe8227ba9ab11a49de2b475ae5 upstream. Some firmware versions of the 9600 series SAS HBA byte-swap the REPORT ZONES command reply buffer from ATA-ZAC devices by directly accessing the buffer in the host memory. This does not respect the default command DMA direction and causes IOMMU page faults on architectures with an IOMMU enforcing write-only mappings for DMA_FROM_DEVICE DMA driection (e.g. AMD hosts). scsi 18:0:0:0: Direct-Access-ZBC ATA WDC WSH722020AL W870 PQ: 0 ANSI: 6 scsi 18:0:0:0: SATA: handle(0x0027), sas_addr(0x300062b2083e7c40), phy(0), device_name(0x5000cca29dc35e11) scsi 18:0:0:0: enclosure logical id (0x300062b208097c40), slot(0) scsi 18:0:0:0: enclosure level(0x0000), connector name( C0.0) scsi 18:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) scsi 18:0:0:0: qdepth(32), tagged(1), scsi_level(7), cmd_que(1) sd 18:0:0:0: Attached scsi generic sg2 type 20 sd 18:0:0:0: [sdc] Host-managed zoned block device mpt3sas 0000:41:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0021 address=0xfff9b200 flags=0x0050] mpt3sas 0000:41:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0021 address=0xfff9b300 flags=0x0050] mpt3sas_cm0: mpt3sas_ctl_pre_reset_handler: Releasing the trace buffer due to adapter reset. mpt3sas_cm0 fault info from func: mpt3sas_base_make_ioc_ready mpt3sas_cm0: fault_state(0x2666)! mpt3sas_cm0: sending diag reset !! mpt3sas_cm0: diag reset: SUCCESS sd 18:0:0:0: [sdc] REPORT ZONES start lba 0 failed sd 18:0:0:0: [sdc] REPORT ZONES: Result: hostbyte=DID_RESET driverbyte=DRIVER_OK sd 18:0:0:0: [sdc] 0 4096-byte logical blocks: (0 B/0 B) Avoid such issue by always mapping the buffer of REPORT ZONES commands using DMA_BIDIRECTIONAL (read+write IOMMU mapping). This is done by introducing the helper function _base_scsi_dma_map() and using this helper in _base_build_sg_scmd() and _base_build_sg_scmd_ieee() instead of calling directly scsi_dma_map(). Fixes: 471ef9d4e498 ("mpt3sas: Build MPI SGL LIST on GEN2 HBAs and IEEE SGL LIST on GEN3 HBAs") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20240719073913.179559-3-dlemoal@kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-03minmax: scsi: fix mis-use of 'clamp()' in sr.cLinus Torvalds1-1/+1
commit 9f499b8c791d2983c0a31a543c51d1b2f15e8755 upstream. While working on simplifying the minmax functions, and avoiding excessive macro expansion, it turns out that the sr.c use of the 'clamp()' macro has the arguments the wrong way around. The clamp logic is val = clamp(in, low, high); and it returns the input clamped to the low/high limits. But sr.c ddid speed = clamp(0, speed, 0xffff / 177); which clamps the value '0' to the range '[speed, 0xffff / 177]' and ends up being nonsensical. Happily, I don't think anybody ever cared. Fixes: 9fad9d560af5 ("scsi: sr: Fix unintentional arithmetic wraparound") Cc: Justin Stitt <justinstitt@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Wentao Guan <guanwentao@uniontech.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-03scsi: qla2xxx: validate nvme_local_port correctlyNilesh Javali1-1/+4
commit eb1d4ce2609584eeb7694866f34d4b213caa3af9 upstream. The driver load failed with error message, qla2xxx [0000:04:00.0]-ffff:0: register_localport failed: ret=ffffffef and with a kernel crash, BUG: unable to handle kernel NULL pointer dereference at 0000000000000070 Workqueue: events_unbound qla_register_fcport_fn [qla2xxx] RIP: 0010:nvme_fc_register_remoteport+0x16/0x430 [nvme_fc] RSP: 0018:ffffaaa040eb3d98 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff9dfb46b78c00 RCX: 0000000000000000 RDX: ffff9dfb46b78da8 RSI: ffffaaa040eb3e08 RDI: 0000000000000000 RBP: ffff9dfb612a0a58 R08: ffffffffaf1d6270 R09: 3a34303a30303030 R10: 34303a303030305b R11: 2078787832616c71 R12: ffff9dfb46b78dd4 R13: ffff9dfb46b78c24 R14: ffff9dfb41525300 R15: ffff9dfb46b78da8 FS: 0000000000000000(0000) GS:ffff9dfc67c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000070 CR3: 000000018da10004 CR4: 00000000000206f0 Call Trace: qla_nvme_register_remote+0xeb/0x1f0 [qla2xxx] ? qla2x00_dfs_create_rport+0x231/0x270 [qla2xxx] qla2x00_update_fcport+0x2a1/0x3c0 [qla2xxx] qla_register_fcport_fn+0x54/0xc0 [qla2xxx] Exit the qla_nvme_register_remote() function when qla_nvme_register_hba() fails and correctly validate nvme_local_port. Cc: stable@vger.kernel.org Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20240710171057.35066-3-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-03scsi: qla2xxx: Complete command early within lockShreyas Deodhar1-5/+0
commit 4475afa2646d3fec176fc4d011d3879b26cb26e3 upstream. A crash was observed while performing NPIV and FW reset, BUG: kernel NULL pointer dereference, address: 000000000000001c #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 1 PREEMPT_RT SMP NOPTI RIP: 0010:dma_direct_unmap_sg+0x51/0x1e0 RSP: 0018:ffffc90026f47b88 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000021 RCX: 0000000000000002 RDX: 0000000000000021 RSI: 0000000000000000 RDI: ffff8881041130d0 RBP: ffff8881041130d0 R08: 0000000000000000 R09: 0000000000000034 R10: ffffc90026f47c48 R11: 0000000000000031 R12: 0000000000000000 R13: 0000000000000000 R14: ffff8881565e4a20 R15: 0000000000000000 FS: 00007f4c69ed3d00(0000) GS:ffff889faac80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000001c CR3: 0000000288a50002 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __die_body+0x1a/0x60 ? page_fault_oops+0x16f/0x4a0 ? do_user_addr_fault+0x174/0x7f0 ? exc_page_fault+0x69/0x1a0 ? asm_exc_page_fault+0x22/0x30 ? dma_direct_unmap_sg+0x51/0x1e0 ? preempt_count_sub+0x96/0xe0 qla2xxx_qpair_sp_free_dma+0x29f/0x3b0 [qla2xxx] qla2xxx_qpair_sp_compl+0x60/0x80 [qla2xxx] __qla2x00_abort_all_cmds+0xa2/0x450 [qla2xxx] The command completion was done early while aborting the commands in driver unload path but outside lock to avoid the WARN_ON condition of performing dma_free_attr within the lock. However this caused race condition while command completion via multiple paths causing system crash. Hence complete the command early in unload path but within the lock to avoid race condition. Fixes: 0367076b0817 ("scsi: qla2xxx: Perform lockless command completion in abort path") Cc: stable@vger.kernel.org Signed-off-by: Shreyas Deodhar <sdeodhar@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20240710171057.35066-7-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-03scsi: qla2xxx: Fix flash read failureQuinn Tran2-46/+125
commit 29e222085d8907ccff18ecd931bdd4c6b1f11b92 upstream. Link up failure is observed as a result of flash read failure. Current code does not check flash read return code where it relies on FW checksum to detect the problem. Add check of flash read failure to detect the problem sooner. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/all/202406210815.rPDRDMBi-lkp@intel.com/ Cc: stable@vger.kernel.org Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20240710171057.35066-6-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-03scsi: qla2xxx: Reduce fabric scan duplicate codeQuinn Tran5-269/+200
commit beafd692461443e0fb1d61aa56886bf85ef6f5e4 upstream. For fabric scan, current code uses switch scan opcode and flags as the method to iterate through different commands to carry out the process. This makes it hard to read. This patch convert those opcode and flags into steps. In addition, this help reduce some duplicate code. Consolidate routines that handle GPNFT & GNNFT. Cc: stable@vger.kernel.org Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20240710171057.35066-10-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-03scsi: qla2xxx: Use QP lock to search for bsgQuinn Tran1-39/+57
commit c449b4198701d828e40d60a2abd30970b74a1d75 upstream. On bsg timeout, hardware_lock is used as part of search for the srb. Instead, qpair lock should be used to iterate through different qpair. Cc: stable@vger.kernel.org Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20240710171057.35066-11-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-03scsi: qla2xxx: Fix for possible memory corruptionShreyas Deodhar1-1/+1
commit c03d740152f78e86945a75b2ad541bf972fab92a upstream. Init Control Block is dereferenced incorrectly. Correctly dereference ICB Cc: stable@vger.kernel.org Signed-off-by: Shreyas Deodhar <sdeodhar@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20240710171057.35066-4-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-03scsi: qla2xxx: Unable to act on RSCN for port onlineQuinn Tran4-8/+60
commit c3d98b12eef8db436e32f1a8c5478be57dc15621 upstream. The device does not come online when the target port is online. There were multiple RSCNs indicating multiple devices were affected. Driver is in the process of finishing a fabric scan. A new RSCN (device up) arrived at the tail end of the last fabric scan. Driver mistakenly thinks the new RSCN is being taken care of by the previous fabric scan, where this notification is cleared and not acted on. The laser needs to be blinked again to get the device to show up. To prevent driver from accidentally clearing the RSCN notification, each RSCN is given a generation value. A fabric scan will scan for that generation(s). Any new RSCN arrive after the scan start will have a new generation value. This will trigger another scan to get latest data. The RSCN notification flag will be cleared when the scan is associate to that generation. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202406210538.w875N70K-lkp@intel.com/ Fixes: bb2ca6b3f09a ("scsi: qla2xxx: Relogin during fabric disturbance") Cc: stable@vger.kernel.org Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20240710171057.35066-2-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-03scsi: qla2xxx: During vport delete send async logout explicitlyManish Rangankar1-1/+1
commit 76f480d7c717368f29a3870f7d64471ce0ff8fb2 upstream. During vport delete, it is observed that during unload we hit a crash because of stale entries in outstanding command array. For all these stale I/O entries, eh_abort was issued and aborted (fast_fail_io = 2009h) but I/Os could not complete while vport delete is in process of deleting. BUG: kernel NULL pointer dereference, address: 000000000000001c #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI Workqueue: qla2xxx_wq qla_do_work [qla2xxx] RIP: 0010:dma_direct_unmap_sg+0x51/0x1e0 RSP: 0018:ffffa1e1e150fc68 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000021 RCX: 0000000000000001 RDX: 0000000000000021 RSI: 0000000000000000 RDI: ffff8ce208a7a0d0 RBP: ffff8ce208a7a0d0 R08: 0000000000000000 R09: ffff8ce378aac9c8 R10: ffff8ce378aac8a0 R11: ffffa1e1e150f9d8 R12: 0000000000000000 R13: 0000000000000000 R14: ffff8ce378aac9c8 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8d217f000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000001c CR3: 0000002089acc000 CR4: 0000000000350ee0 Call Trace: <TASK> qla2xxx_qpair_sp_free_dma+0x417/0x4e0 ? qla2xxx_qpair_sp_compl+0x10d/0x1a0 ? qla2x00_status_entry+0x768/0x2830 ? newidle_balance+0x2f0/0x430 ? dequeue_entity+0x100/0x3c0 ? qla24xx_process_response_queue+0x6a1/0x19e0 ? __schedule+0x2d5/0x1140 ? qla_do_work+0x47/0x60 ? process_one_work+0x267/0x440 ? process_one_work+0x440/0x440 ? worker_thread+0x2d/0x3d0 ? process_one_work+0x440/0x440 ? kthread+0x156/0x180 ? set_kthread_struct+0x50/0x50 ? ret_from_fork+0x22/0x30 </TASK> Send out async logout explicitly for all the ports during vport delete. Cc: stable@vger.kernel.org Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20240710171057.35066-8-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-03scsi: lpfc: Allow DEVICE_RECOVERY mode after RSCN receipt if in PRLI_ISSUE stateJustin Tee1-1/+1
commit 9609385dd91b26751019b22ca9bfa4bec7602ae1 upstream. Certain vendor specific targets initially register with the fabric as an initiator function first and then re-register as a target function afterwards. The timing of the target function re-registration can cause a race condition such that the driver is stuck assuming the remote port as an initiator function and never discovers the target's hosted LUNs. Expand the nlp_state qualifier to also include NLP_STE_PRLI_ISSUE because the state means that PRLI was issued but we have not quite reached MAPPED_NODE state yet. If we received an RSCN in the PRLI_ISSUE state, then we should restart discovery again by going into DEVICE_RECOVERY. Fixes: dded1dc31aa4 ("scsi: lpfc: Modify when a node should be put in device recovery mode during RSCN") Cc: <stable@vger.kernel.org> # v6.6+ Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240628172011.25921-3-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-03scsi: qla2xxx: Return ENOBUFS if sg_cnt is more than one for ELS cmdsSaurav Kashyap1-1/+1
commit ce2065c4cc4f05635413f63f6dc038d7d4842e31 upstream. Firmware only supports single DSDs in ELS Pass-through IOCB (0x53h), sg cnt is decided by the SCSI ML. User is not aware of the cause of an acutal error. Return the appropriate return code that will be decoded by API and application and proper error message will be displayed to user. Fixes: 6e98016ca077 ("[SCSI] qla2xxx: Re-organized BSG interface specific code.") Cc: stable@vger.kernel.org Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20240710171057.35066-5-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-03scsi: qla2xxx: Fix optrom version displayed in FDMIShreyas Deodhar1-1/+1
commit 348744f27a35e087acc9378bf53537fbfb072775 upstream. Bios version was popluated for FDMI response. Systems with EFI would show optrom version as 0. EFI version is populated here and BIOS version is already displayed under FDMI_HBA_BOOT_BIOS_NAME. Cc: stable@vger.kernel.org Signed-off-by: Shreyas Deodhar <sdeodhar@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20240710171057.35066-9-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-03scsi: lpfc: Fix a possible null pointer dereferenceHuai-Yuan Liu1-0/+5
[ Upstream commit 5e0bf3e8aec2cbc51123f84b29aaacbd91fc56fa ] In function lpfc_xcvr_data_show, the memory allocation with kmalloc might fail, thereby making rdp_context a null pointer. In the following context and functions that use this pointer, there are dereferencing operations, leading to null pointer dereference. To fix this issue, a null pointer check should be added. If it is null, use scnprintf to notify the user and return len. Fixes: 479b0917e447 ("scsi: lpfc: Create a sysfs entry called lpfc_xcvr_data for transceiver info") Signed-off-by: Huai-Yuan Liu <qq810974084@gmail.com> Link: https://lore.kernel.org/r/20240621082545.449170-1-qq810974084@gmail.com Reviewed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-07-25scsi: libsas: Fix exp-attached device scan after probe failure scanned in ↵Xingui Yang1-0/+14
again after probe failed [ Upstream commit ab2068a6fb84751836a84c26ca72b3beb349619d ] The expander phy will be treated as broadcast flutter in the next revalidation after the exp-attached end device probe failed, as follows: [78779.654026] sas: broadcast received: 0 [78779.654037] sas: REVALIDATING DOMAIN on port 0, pid:10 [78779.654680] sas: ex 500e004aaaaaaa1f phy05 change count has changed [78779.662977] sas: ex 500e004aaaaaaa1f phy05 originated BROADCAST(CHANGE) [78779.662986] sas: ex 500e004aaaaaaa1f phy05 new device attached [78779.663079] sas: ex 500e004aaaaaaa1f phy05:U:8 attached: 500e004aaaaaaa05 (stp) [78779.693542] hisi_sas_v3_hw 0000:b4:02.0: dev[16:5] found [78779.701155] sas: done REVALIDATING DOMAIN on port 0, pid:10, res 0x0 [78779.707864] sas: Enter sas_scsi_recover_host busy: 0 failed: 0 ... [78835.161307] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1 [78835.171344] sas: sas_probe_sata: for exp-attached device 500e004aaaaaaa05 returned -19 [78835.180879] hisi_sas_v3_hw 0000:b4:02.0: dev[16:5] is gone [78835.187487] sas: broadcast received: 0 [78835.187504] sas: REVALIDATING DOMAIN on port 0, pid:10 [78835.188263] sas: ex 500e004aaaaaaa1f phy05 change count has changed [78835.195870] sas: ex 500e004aaaaaaa1f phy05 originated BROADCAST(CHANGE) [78835.195875] sas: ex 500e004aaaaaaa1f rediscovering phy05 [78835.196022] sas: ex 500e004aaaaaaa1f phy05:U:A attached: 500e004aaaaaaa05 (stp) [78835.196026] sas: ex 500e004aaaaaaa1f phy05 broadcast flutter [78835.197615] sas: done REVALIDATING DOMAIN on port 0, pid:10, res 0x0 The cause of the problem is that the related ex_phy's attached_sas_addr was not cleared after the end device probe failed, so reset it. Signed-off-by: Xingui Yang <yangxingui@huawei.com> Link: https://lore.kernel.org/r/20240619091742.25465-1-yangxingui@huawei.com Reviewed-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-07-25scsi: qedf: Set qed_slowpath_params to zero before useSaurav Kashyap1-0/+1
[ Upstream commit 6c3bb589debd763dc4b94803ddf3c13b4fcca776 ] Zero qed_slowpath_params before use. Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20240515091101.18754-4-skashyap@marvell.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-07-25scsi: qedf: Wait for stag work during unloadSaurav Kashyap2-3/+28
[ Upstream commit 78e88472b60936025b83eba57cffa59d3501dc07 ] If stag work is already scheduled and unload is called, it can lead to issues as unload cleans up the work element. Wait for stag work to get completed before cleanup during unload. Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20240515091101.18754-3-skashyap@marvell.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-07-25scsi: qedf: Don't process stag work during unload and recoverySaurav Kashyap1-0/+16
[ Upstream commit 51071f0831ea975fc045526dd7e17efe669dc6e1 ] Stag work can cause issues during unload and recovery, hence don't process it. Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20240515091101.18754-2-skashyap@marvell.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-07-25scsi: sr: Fix unintentional arithmetic wraparoundJustin Stitt2-2/+5
[ Upstream commit 9fad9d560af5c654bb38e0b07ee54a4e9acdc5cd ] Running syzkaller with the newly reintroduced signed integer overflow sanitizer produces this report: [ 65.194362] ------------[ cut here ]------------ [ 65.197752] UBSAN: signed-integer-overflow in ../drivers/scsi/sr_ioctl.c:436:9 [ 65.203607] -2147483648 * 177 cannot be represented in type 'int' [ 65.207911] CPU: 2 PID: 10416 Comm: syz-executor.1 Not tainted 6.8.0-rc2-00035-gb3ef86b5a957 #1 [ 65.213585] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 65.219923] Call Trace: [ 65.221556] <TASK> [ 65.223029] dump_stack_lvl+0x93/0xd0 [ 65.225573] handle_overflow+0x171/0x1b0 [ 65.228219] sr_select_speed+0xeb/0xf0 [ 65.230786] ? __pm_runtime_resume+0xe6/0x130 [ 65.233606] sr_block_ioctl+0x15d/0x1d0 ... Historically, the signed integer overflow sanitizer did not work in the kernel due to its interaction with `-fwrapv` but this has since been changed [1] in the newest version of Clang. It was re-enabled in the kernel with Commit 557f8c582a9b ("ubsan: Reintroduce signed overflow sanitizer"). Firstly, let's change the type of "speed" to unsigned long as sr_select_speed()'s only caller passes in an unsigned long anyways. $ git grep '\.select_speed' | drivers/scsi/sr.c: .select_speed = sr_select_speed, ... | static int cdrom_ioctl_select_speed(struct cdrom_device_info *cdi, | unsigned long arg) | { | ... | return cdi->ops->select_speed(cdi, arg); | } Next, let's add an extra check to make sure we don't exceed 0xffff/177 (350) since 0xffff is the max speed. This has two benefits: 1) we deal with integer overflow before it happens and 2) we properly respect the max speed of 0xffff. There are some "magic" numbers here but I did not want to change more than what was necessary. Link: https://github.com/llvm/llvm-project/pull/82432 [1] Closes: https://github.com/KSPP/linux/issues/357 Cc: linux-hardening@vger.kernel.org Signed-off-by: Justin Stitt <justinstitt@google.com> Link: https://lore.kernel.org/r/20240508-b4-b4-sio-sr_select_speed-v2-1-00b68f724290@google.com Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-07-25scsi: core: alua: I/O errors for ALUA state transitionsMartin Wilck1-9/+22
[ Upstream commit 10157b1fc1a762293381e9145041253420dfc6ad ] When a host is configured with a few LUNs and I/O is running, injecting FC faults repeatedly leads to path recovery problems. The LUNs have 4 paths each and 3 of them come back active after say an FC fault which makes 2 of the paths go down, instead of all 4. This happens after several iterations of continuous FC faults. Reason here is that we're returning an I/O error whenever we're encountering sense code 06/04/0a (LOGICAL UNIT NOT ACCESSIBLE, ASYMMETRIC ACCESS STATE TRANSITION) instead of retrying. [mwilck: The original patch was developed by Rajashekhar M A and Hannes Reinecke. I moved the code to alua_check_sense() as suggested by Mike Christie [1]. Evan Milne had raised the question whether pg->state should be set to transitioning in the UA case [2]. I believe that doing this is correct. SCSI_ACCESS_STATE_TRANSITIONING by itself doesn't cause I/O errors. Our handler schedules an RTPG, which will only result in an I/O error condition if the transitioning timeout expires.] [1] https://lore.kernel.org/all/0bc96e82-fdda-4187-148d-5b34f81d4942@oracle.com/ [2] https://lore.kernel.org/all/CAGtn9r=kicnTDE2o7Gt5Y=yoidHYD7tG8XdMHEBJTBraVEoOCw@mail.gmail.com/ Co-developed-by: Rajashekhar M A <rajs@netapp.com> Co-developed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin Wilck <martin.wilck@suse.com> Link: https://lore.kernel.org/r/20240514140344.19538-1-mwilck@suse.com Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-07-11scsi: mpi3mr: Use proper format specifier in mpi3mr_sas_port_add()Nathan Chancellor1-1/+1
commit 9f365cb8bbd0162963d6852651d7c9e30adcb7b5 upstream. When building for a 32-bit platform such as ARM or i386, for which size_t is unsigned int, there is a warning due to using an unsigned long format specifier: drivers/scsi/mpi3mr/mpi3mr_transport.c:1370:11: error: format specifies type 'unsigned long' but the argument has type 'unsigned int' [-Werror,-Wformat] 1369 | ioc_warn(mrioc, "skipping port %u, max allowed value is %lu\n", | ~~~ | %u 1370 | i, sizeof(mr_sas_port->phy_mask) * 8); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Use the proper format specifier for size_t, %zu, to resolve the warning for all platforms. Fixes: 3668651def2c ("scsi: mpi3mr: Sanitise num_phys") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20240514-mpi3mr-fix-wformat-v1-1-f1ad49217e5e@kernel.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-11scsi: mpi3mr: Sanitise num_physTomas Henzl1-0/+10
[ Upstream commit 3668651def2c1622904e58b0280ee93121f2b10b ] Information is stored in mr_sas_port->phy_mask, values larger then size of this field shouldn't be allowed. Signed-off-by: Tomas Henzl <thenzl@redhat.com> Link: https://lore.kernel.org/r/20240226151013.8653-1-thenzl@redhat.com Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-07-11scsi: qedf: Make qedf_execute_tmf() non-preemptibleJohn Meneghini1-3/+3
[ Upstream commit 0d8b637c9c5eeaa1a4e3dfb336f3ff918eb64fec ] Stop calling smp_processor_id() from preemptible code in qedf_execute_tmf90. This results in BUG_ON() when running an RT kernel. [ 659.343280] BUG: using smp_processor_id() in preemptible [00000000] code: sg_reset/3646 [ 659.343282] caller is qedf_execute_tmf+0x8b/0x360 [qedf] Tested-by: Guangwu Zhang <guazhang@redhat.com> Cc: Saurav Kashyap <skashyap@marvell.com> Cc: Nilesh Javali <njavali@marvell.com> Signed-off-by: John Meneghini <jmeneghi@redhat.com> Link: https://lore.kernel.org/r/20240403150155.412954-1-jmeneghi@redhat.com Acked-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 03:17:17 +0000