summaryrefslogtreecommitdiff
path: root/drivers/gpio
AgeCommit message (Collapse)AuthorFilesLines
2018-08-15Merge tag 'gpio-v4.19-1' of ↵Linus Torvalds42-264/+1373
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.19 kernel cycle. I don't know if anything in particular stands out. Maybe the Aspeed coprocessor thing from Benji: Aspeed is doing baseboard management chips (BMC's) for servers etc. These Aspeed's are ARM processors that exist inside (I guess) Intel servers, and they are moving forward to using mainline Linux in those. This is one of the pieces of the puzzle to achive that. They are doing OpenBMC, it's pretty cool: https://lwn.net/Articles/683320/ Summary: Core changes: - Add a new API for explicitly naming GPIO consumers, when needed. - Don't let userspace set values on input lines. While we do not think anyone would do this crazy thing we better plug the hole before someone uses it and think it's a nifty feature. - Avoid calling chip->request() for unused GPIOs. New drivers/subdrivers: - The Mediatek MT7621 is supported which is a big win for OpenWRT and similar router distributions using this chip, as it seems every major router manufacturer on the planet has made products using this chip: https://wikidevi.com/wiki/MediaTek_MT7621 - The Tegra 194 is now supported. - The IT87 driver now supports IT8786E and IT8718F super-IO chips. - Add support for Rockchip RK3328 in the syscon GPIO driver. Driver changes: - Handle the get/set_multiple() properly on MMIO chips with inverted direction registers. We didn't have this problem until a new chip appear that has get/set registers AND inverted direction bits, OK now we handle it. - A patch series making more error codes percolate upward properly for different errors on gpiochip_lock_as_irq(). - Get/set multiple for the OMAP driver, accelerating these multiple line operations if possible. - A coprocessor interface for the Aspeed driver. Sometimes a few GPIO lines need to be grabbed by a co-processor for doing automated tasks, sometimes they are available as GPIO lines. By adding an explicit API in this driver we make it possible for the two line consumers to coexist. (This work was made available on the ib-aspeed branch, which may be appearing in other pull requests.) - Implemented .get_direction() and open drain in the SCH311x driver. - Continuing cleanup of included headers in GPIO drivers" * tag 'gpio-v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (80 commits) gpio: it87: Add support for IT8613 gpio: it87: add support for IT8718F Super I/O. gpiolib: Avoid calling chip->request() for unused gpios gpio: tegra: Include the right header gpio: mmio: Fix up inverted direction registers gpio: xilinx: Use the right include gpio: timberdale: Include the right header gpio: tb10x: Use the right include gpiolib: Fix of_node inconsistency gpio: vr41xx: Bail out on gpiochip_lock_as_irq() error gpio: uniphier: Bail out on gpiochip_lock_as_irq() error gpio: xgene-sb: Don't shadow error code of gpiochip_lock_as_irq() gpio: em: Don't shadow error code of gpiochip_lock_as_irq() gpio: dwapb: Don't shadow error code of gpiochip_lock_as_irq() gpio: bcm-kona: Don't shadow error code of gpiochip_lock_as_irq() gpiolib: Don't shadow error code of gpiochip_lock_as_irq() gpio: syscon: rockchip: add GRF GPIO support for rk3328 gpio: omap: Add get/set_multiple() callbacks gpio: pxa: remove set but not used variable 'gpio_offset' gpio-it87: add support for IT8786E Super I/O ...
2018-08-14Merge tag 'acpi-4.19-rc1' of ↵Linus Torvalds1-4/+7
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These revert two ACPICA commits that are not needed any more, rework the property graphs support in ACPI to be more aligned with the analogous DT code, add some new quirks and remove one that isn't needed any more, add a special platform driver to enumerate multiple I2C devices hooked up to the same device object in the ACPI tables and update the battery and button drivers. Specifics: - Revert two ACPICA commits that are not needed any more (Erik Schmauss). - Rework property graph support in the ACPI device properties framework to make it behave more like the analogous DT code and update the documentation of it (Sakari Ailus). - Change the default ACPI device status after initialization to ACPI_STA_DEFAULT instead of 0 (Hans de Goede). - Add a special platform driver for enumerating multiple I2C devices hooked up to the same object in the ACPI tables (Hans de Goede). - Fix the ACPI battery driver to avoid reporting full capacity on systems without support for that and clean it up (Hans de Goede, Dmitry Rozhkov, Lucas Rangit Magasweran). - Add two system wakeup quirks to the ACPI EC driver (Aaron Ma, Mika Westerberg). - Add the touchscreen on Dell Venue Pro 7139 to the list of "always present" devices to make it work (Tristian Celestin). - Revert a special tables handling quirk for Dell XPS 9570 and Precision M5530 which is not needed any more (Kai Heng Feng). - Add support for a new OEM _OSI string to allow system vendors to work around issues with NVidia HDMI audio (Alex Hung). - Prevent the ACPI button driver from reporting excessive system wakeup events and clean it up (Ravi Chandra Sadineni, Randy Dunlap). - Clean up two minor code style issues in the ACPI core and GHES handling on ARM64 (Dongjiu Geng, John Garry, Tom Todd)" * tag 'acpi-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (34 commits) platform/x86: Add ACPI i2c-multi-instantiate pseudo driver ACPI / x86: utils: Remove status workaround from acpi_device_always_present() ACPI / scan: Create platform device for fwnodes with multiple i2c devices ACPI / scan: Initialize status to ACPI_STA_DEFAULT ACPI / EC: Add another entry for Thinkpad X1 Carbon 6th ACPI: bus: Fix a pointer coding style issue arm64 / ACPI: clean the additional checks before calling ghes_notify_sea() ACPI / scan: Add static attribute to indirect_io_hosts[] ACPI / battery: Do not export energy_full[_design] on devices without full_charge_capacity ACPI / EC: Use ec_no_wakeup on ThinkPad X1 Yoga 3rd ACPI / battery: get rid of negations in conditions ACPI / battery: use specialized print macros ACPI / battery: reorder headers alphabetically ACPI / battery: drop inclusion of init.h ACPI: battery: remove redundant old_present check on insertion ACPI: property: graph: Update graph documentation to use generic references ACPI: property: graph: Improve graph documentation for port/ep numbering ACPI: property: graph: Fix graph documentation ACPI: property: Update documentation for hierarchical data extension 1.1 ACPI: property: Document key numbering for hierarchical data extension refs ...
2018-08-14Merge tag 'pinctrl-v4.19-1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for v4.19: Core changes: - Augment pinctrl_generic_add_group() and pinmux_generic_add_function() to return the selector for the added group/function to the caller and augment (hopefully) all drivers to handle this New subdrivers: - Qualcomm PM8998 and PM8005 are supported in the SPMI pin control and GPIO driver - Intel Ice Lake PCH (platform controller hub) support - NXP (ex Freescale) i.MX8MQ support - Berlin AS370 support Improvements to drivers: - Support interrupts on the Ocelot pin controller - Add SPI pins to the Uniphier driver - Define a GPIO compatible per SoC in the Tegra driver - Push Tegra initialization down in the initlevels - Support external wakeup interrupts on the Exynos - Add generic clocks pins to the meson driver - Add USB and HSCIF pins for some Renesas PFC chips - Suspend/resume support in the armada-37xx - Interrupt support for the Actions Semiconductor S900 also known as "owl" - Correct the pin ordering in Cedarfork - Debugfs output for INTF in the mcp23s08 driver - Avoid divisions in context save/restore in pinctrl-single The rest is minor bug fixes or cleanups" * tag 'pinctrl-v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (69 commits) pinctrl: nomadik: silence uninitialized variable warning pinctrl: axp209: Fix NULL pointer dereference after allocation pinctrl: samsung: Remove duplicated "wakeup" in printk pinctrl: ocelot: add support for interrupt controller pinctrl: intel: Don't shadow error code of gpiochip_lock_as_irq() pinctrl: berlin: fix 'pctrl->functions' allocation in berlin_pinctrl_build_state gpio: tegra: Move driver registration to subsys_init level pinctrl: tegra: Move drivers registration to arch_init level pinctrl: baytrail: actually print the apparently misconfigured pin MAINTAINERS: Replace Heikki as maintainer of Intel pinctrl pinctrl: freescale: off by one in imx1_pinconf_group_dbg_show() pinctrl: uniphier: add spi pin-mux settings pinctrl: cannonlake: Fix community ordering for H variant pinctrl: tegra: define GPIO compatible node per SoC pinctrl: intel: Do pin translation when lock IRQ pinctrl: imx: off by one in imx_pinconf_group_dbg_show() pinctrl: mediatek: include chained_irq.h header pinctrl/amd: only handle irq if it is pending and unmasked pinctrl/amd: fix gpio irq level in debugfs pinctrl: stm32: add syscfg mask parameter ...
2018-08-14Merge branches 'acpica' and 'acpi-property'Rafael J. Wysocki1-4/+7
Merge ACPICA changes and updates of the ACPI device properties framework for 4.19. These revert two ACPICA commits that are not needed any more and modify the properties graph support in ACPI to be more in-line with the analogous DT code. * acpica: ACPICA: Update version to 20180629 ACPICA: Revert "iASL compiler: allow compilation of externals with paths that refer to existing names" ACPICA: Revert "iASL: change processing of external op namespace nodes for correctness" * acpi-property: ACPI: property: graph: Update graph documentation to use generic references ACPI: property: graph: Improve graph documentation for port/ep numbering ACPI: property: graph: Fix graph documentation ACPI: property: Update documentation for hierarchical data extension 1.1 ACPI: property: Document key numbering for hierarchical data extension refs ACPI: property: Use data node name and reg property for graphs ACPI: property: Allow direct graph endpoint references ACPI: property: Make the ACPI graph API private ACPI: property: Document hierarchical data extension references ACPI: property: Allow making references to non-device nodes ACPI: Convert ACPI reference args to generic fwnode reference args
2018-08-10gpio: it87: Add support for IT8613Leonid Bloch2-1/+11
This was tested on actual hardware and found to work fine, but currently the official specifications of this chip could not be obtained to confirm the numbers. Signed-off-by: Leonid Bloch <lbloch@janustech.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-10gpio: it87: add support for IT8718F Super I/O.Ivan Podovalov1-0/+2
The DIO connector on the WAFER-945GSE is interfaced to GPIO ports on the ITE IT8718F Super I/O chipset. From the datasheet of ITE IT8718F, the GPIO interface is identical to IT8728, so just add it to the same case as the other chip. Signed-off-by: Ivan Podovalov <ipodovalov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-10gpiolib: Avoid calling chip->request() for unused gpiosBiju Das1-1/+6
Add a check for unused gpios to avoid chip->request() call to client driver for unused gpios. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-10gpio: tegra: Include the right headerLinus Walleij1-2/+2
This is a GPIO driver so include only <linux/gpio/driver.h>. Drop the use of GPIOF_* flags: these are for consumers, not drivers. Just return 0/1. Cc: Stefan Agner <stefan@agner.ch> Cc: Thierry Reding <treding@nvidia.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-10gpio: mmio: Fix up inverted direction registersLinus Walleij1-45/+63
The bgpio_init() takes one of two arguments to specify a register to set the direction of the GPIO line: either dirout that indicates that a 1 in the bit in that register sets the corresponding line to output, or dirin which indicates that a 1 in the bit in that register sets the corresponding line to input. Conversely setting the bit to 0 on these will turn the line into input and output respectively. One of these can be defined but not both. This means that a platform that sets a bit to 1 for output only defines dirout and a platform that sets a bit to 0 for output only defines dirin. In short this defines the polarity of the direction register. Both can also be left as NULL meaning the GPIO chip is either input only or output only. Tomer Maimon discovered that for get/set chips (those where the get and set registers are defined but no separate clear register, and specifying BGPIOF_READ_OUTPUT_REG_SET so that we say we want to read the output value from the SET register) we are unconditionally reading the value from the SET register when the direction bit is 1 and from the DAT register when the direction bit is 0, not taking the direction bit polarity into account. It would be expected that when the direction bit is inverted (dirin is defined but not dirout) we read the current value from the DAT register when the bit is 1 and from the SET register when the bit is 0. Currently only some versions of ATH79, brcmstb, some versions of CLP711x, GE, IOP and Loongson use the dirin mode (a 1 in the register means input). They are unaffected because BGPIOF_READ_OUTPUT_REG_SET is not set on any of them. (They do not read back the SET register to figure out the output value.) So this is no regression with current drivers. However the behaviour is wrong and does not work with Tomer's new driver where he needs to use the BGIOF_READ_OUTPUT_REG_SET. This fixes the above issue by: - Instead of defining separate functions for the inverted case, set up a flag in the gpio_chip that indicates that the direction is inverted. - Remove the special inverted functions for setting input/output and getting the direction, rely on the flag instead. - Respect this flag in bgpio_get_set() and bgpio_get_set_multiple() Reported-by: Tomer Maimon <tmaimon77@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-10gpio: xilinx: Use the right includeLinus Walleij1-1/+1
This is a GPIO driver so use only <linux/gpio/driver.h>. Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-10gpio: timberdale: Include the right headerLinus Walleij1-1/+1
This is a GPIO driver so include only <linux/gpio/driver.h>. Cc: Richard Röjfors <richard.rojfors@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-10gpio: tb10x: Use the right includeLinus Walleij1-2/+1
This driver includes the legacy <linux/gpio.h> and <linux/of_gpio.h> but all it needs is really <linux/gpio/driver.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-10gpiolib: Fix of_node inconsistencyBiju Das2-3/+2
Some platforms are not setting of_node in the driver. On these platforms defining gpio-reserved-ranges on device tree leads to kernel crash. It is due to some parts of the gpio core relying on the driver to set up of_node,while other parts do themselves.This inconsistent behaviour leads to a crash. gpiochip_add_data_with_key() calls gpiochip_init_valid_mask() with of_node as NULL. of_gpiochip_add() fills "of_node" and calls of_gpiochip_init_valid_mask(). The fix is to move the assignment to chip->of_node from of_gpiochip_add() to gpiochip_add_data_with_key(). Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-06gpio: vr41xx: Bail out on gpiochip_lock_as_irq() errorAndy Shevchenko1-1/+7
gpiochip_lock_as_irq() may return a few error codes, bail out if it fails with corresponding returned code. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-06gpio: uniphier: Bail out on gpiochip_lock_as_irq() errorAndy Shevchenko1-2/+1
gpiochip_lock_as_irq() may return a few error codes, bail out if it fails with corresponding returned code. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-06gpio: xgene-sb: Don't shadow error code of gpiochip_lock_as_irq()Andy Shevchenko1-2/+4
gpiochip_lock_as_irq() may return a few error codes, do not shadow them by -ENOSPC and let caller to decide. No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-06gpio: em: Don't shadow error code of gpiochip_lock_as_irq()Andy Shevchenko1-2/+4
gpiochip_lock_as_irq() may return a few error codes, do not shadow them by -EINVAL and let caller to decide. No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-06gpio: dwapb: Don't shadow error code of gpiochip_lock_as_irq()Andy Shevchenko1-2/+4
gpiochip_lock_as_irq() may return a few error codes, do not shadow them by -EINVAL and let caller to decide. No functional change intended. Cc: Hoan Tran <hotran@apm.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-06gpio: bcm-kona: Don't shadow error code of gpiochip_lock_as_irq()Andy Shevchenko1-2/+4
gpiochip_lock_as_irq() may return a few error codes, do not shadow them by -EINVAL and let caller to decide. No functional change intended. Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-06gpiolib: Don't shadow error code of gpiochip_lock_as_irq()Andy Shevchenko1-2/+4
gpiochip_lock_as_irq() may return a few error codes, do not shadow them by -EINVAL and let caller to decide. No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-06gpio: syscon: rockchip: add GRF GPIO support for rk3328Levin Du1-0/+31
In Rockchip RK3328, the output only GPIO_MUTE pin, originally for codec mute control, can also be used for general purpose. It is manipulated by the GRF_SOC_CON10 register in GRF. Aside from the GPIO_MUTE pin, the HDMI pins can also be set in the same way. Currently this GRF GPIO controller only supports the mute pin. If needed in the future, the HDMI pins support can also be added. Signed-off-by: Levin Du <djw@t-chip.com.cn> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-06gpio: omap: Add get/set_multiple() callbacksJanusz Krzysztofik1-2/+86
This should make applications utilizing whole banks work faster. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-03gpio: tegra: Move driver registration to subsys_init levelDmitry Osipenko1-1/+1
There is a bug in regards to deferred probing within the drivers core that causes GPIO-driver to suspend after its users. The bug appears if GPIO-driver probe is getting deferred, which happens after introducing dependency on PINCTRL-driver for the GPIO-driver by defining "gpio-ranges" property in device-tree. The bug in the drivers core is old (more than 4 years now) and is well known, unfortunately there is no easy fix for it. The good news is that we can workaround the deferred probe issue by changing GPIO / PINCTRL drivers registration order and hence by moving PINCTRL driver registration to the arch_init level and GPIO to the subsys_init. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-02gpio: pxa: remove set but not used variable 'gpio_offset'Wei Yongjun1-4/+1
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpio/gpio-pxa.c: In function "pxa_gpio_probe": drivers/gpio/gpio-pxa.c:629:35: warning: variable "gpio_offset" set but not used [-Wunused-but-set-variable] int irq0 = 0, irq1 = 0, irq_mux, gpio_offset = 0; ^ Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-01gpiolib-acpi: make sure we trigger edge events at least once on bootBenjamin Tissoires1-1/+55
On some systems using edge triggered ACPI Event Interrupts, the initial state at boot is not setup by the firmware, instead relying on the edge irq event handler running at least once to setup the initial state. 2 known examples of this are: 1) The Surface 3 has its _LID state controlled by an ACPI operation region triggered by a GPIO event: OperationRegion (GPOR, GeneralPurposeIo, Zero, One) Field (GPOR, ByteAcc, NoLock, Preserve) { Connection ( GpioIo (Shared, PullNone, 0x0000, 0x0000, IoRestrictionNone, "\\_SB.GPO0", 0x00, ResourceConsumer, , ) { // Pin list 0x004C } ), HELD, 1 } Method (_E4C, 0, Serialized) // _Exx: Edge-Triggered GPE { If ((HELD == One)) { ^^LID.LIDB = One } Else { ^^LID.LIDB = Zero Notify (LID, 0x80) // Status Change } Notify (^^PCI0.SPI1.NTRG, One) // Device Check } Currently, the state of LIDB is wrong until the user actually closes or open the cover. We need to trigger the GPIO event once to update the internal ACPI state. Coincidentally, this also enables the Surface 2 integrated HID sensor hub which also requires an ACPI gpio operation region to start initialization. 2) Various Bay Trail based tablets come with an external USB mux and TI T1210B USB phy to enable USB gadget mode. The mux is controlled by a GPIO which is controlled by an edge triggered ACPI Event Interrupt which monitors the micro-USB ID pin. When the tablet is connected to a PC (or no cable is plugged in), the ID pin is high and the tablet should be in gadget mode. But the GPIO controlling the mux is initialized by the firmware so that the USB data lines are muxed to the host controller. This means that if the user wants to use gadget mode, the user needs to first plug in a host-cable to force the ID pin low and then unplug it and connect the tablet to a PC, to get the ACPI event handler to run and switch the mux to device mode, This commit fixes both by running the event-handler once on boot. Note that the running of the event-handler is done from a late_initcall, this is done because the handler AML code may rely on OperationRegions registered by other builtin drivers. This avoids errors like these: [ 0.133026] ACPI Error: No handler for Region [XSCG] ((____ptrval____)) [GenericSerialBus] (20180531/evregion-132) [ 0.133036] ACPI Error: Region GenericSerialBus (ID=9) has no handler (20180531/exfldio-265) [ 0.133046] ACPI Error: Method parse/execution failed \_SB.GPO2._E12, AE_NOT_EXIST (20180531/psparse-516) Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> [hdegoede: Document BYT USB mux reliance on initial trigger] [hdegoede: Run event handler from a late_initcall, rather then immediately] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-30gpio-it87: add support for IT8786E Super I/OVincent Prince1-0/+2
From the datasheet, the GPIO interface is identical to IT8728 (same description), so just add it to the same case as the other chip. Signed-off-by: Vincent Prince <vincent.prince.fr@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-29gpio: tegra: drop tegra specific GPIO lockdep classesStefan Agner1-9/+0
Since commit e45d1c80c0ee ("gpio: put GPIO IRQs into their own lock class") and commit a0a8bcf4670c ("gpiolib: irqchip: use different lockdep class for each gpio irqchip") GPIO lib takes care of lockdep classes. In fact, gpiochip_irq_map() overwrites the class anyway, so the lockdep class set by the driver is useless. Remove it. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-29gpio: fix meaningless return expressionzhong jiang1-1/+1
Fix the following sparse error: drivers/gpio/gpio-ath79.c:54:16: error: return expression in void function Signed-off-by: zhong jiang <zhongjiang@huawei.com> Acked-by: Alban Bedel <albeu@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-29gpio: mxs: Fit writel() into a single lineFabio Estevam1-2/+1
There is no need for splitting the writel() call in two lines. Make it fit into a single line instead. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-29gpio: pxa: disable pinctrl calls for PXA3xxDaniel Mack1-8/+27
The pxa3xx driver uses the pinctrl-single driver since a while which does not implement a .gpio_set_direction() callback. The pinmux core will simply return 0 in this case, and the pxa3xx gpio driver hence believes the pinctrl driver did its job and returns as well. This effectively makes pxa_gpio_direction_{input,output} no-ops. To fix this, do not call into the pinctrl subsystem for the PXA3xx platform for now. We can revert this once the pinctrl-single driver learned to support setting pin directions. Signed-off-by: Daniel Mack <daniel@zonque.org> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-29gpio: ml-ioh: Fix buffer underwrite on probe error pathAnton Vasilyev1-1/+2
If ioh_gpio_probe() fails on devm_irq_alloc_descs() then chip may point to any element of chip_save array, so reverse iteration from pointer chip may become chip_save[-1] and gpiochip_remove() will operate with wrong memory. The patch fix the error path of ioh_gpio_probe() to correctly bypass chip_save array. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-29gpiolib: probe deferral error reportingMarcel Ziswiler1-2/+2
Actually report the error code from devm_regulator_get() which may as well just be a probe deferral. This is e.g. what one gets upon booting a Colibri T20: gpiochip_add_data_with_key: GPIOs 0..223 (tegra-gpio) failed to register Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-29gpio: tegra: Fix tegra_gpio_irq_set_type()Dmitry Osipenko1-7/+8
Commit 36b312792b97 ("gpiolib: Respect error code of ->get_direction()") broke tegra_gpio_irq_set_type() because requesting of GPIO direction must be done after enabling GPIO function for a pin. This patch fixes drivers probe failure like this: gpio gpiochip0: (tegra-gpio): gpiochip_lock_as_irq: cannot get GPIO direction tegra-gpio 6000d000.gpio: unable to lock Tegra GPIO 144 as IRQ Fixes: 36b312792b97 ("gpiolib: Respect error code of ->get_direction()") Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-29gpio: mxc: add power management supportAnson Huang1-0/+73
GPIO registers could lose context on i.MX7D, when enter LPSR mode, the whole SoC will be powered off except LPSR domain, GPIO banks will lose context in this case, need to restore the context after resume from LPSR mode. This patch adds new compatible string for i.MX7D which supports GPIO power off feature in suspend, and adds the GPIO save/restore operations in noirq suspend/resume phase, since GPIO is fundamental module which could be used by other peripherals' resume phase. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-29gpio-pisosr: add support for get_multipleMorten Hein Tiljeset1-0/+22
Signed-off-by: Morten Hein Tiljeset <morten.tiljeset@prevas.dk> Reviewed-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-23gpio: uniphier: set legitimate irq trigger type in .to_irq hookMasahiro Yamada1-1/+5
If a GPIO chip is a part of a hierarchy IRQ domain, there is no way to specify the trigger type when gpio(d)_to_irq() allocates an interrupt on-the-fly. Currently, uniphier_gpio_to_irq() sets IRQ_TYPE_NONE, but it causes an error in the .alloc() hook of the parent domain. (drivers/irq/irq-uniphier-aidet.c) Even if we change irq-uniphier-aidet.c to accept the NONE type, GIC complains about it since commit 83a86fbb5b56 ("irqchip/gic: Loudly complain about the use of IRQ_TYPE_NONE"). Instead, use IRQ_TYPE_LEVEL_HIGH as a temporary value when an irq is allocated. irq_set_irq_type() will override it when the irq is really requested. Fixes: dbe776c2ca54 ("gpio: uniphier: add UniPhier GPIO controller driver") Reported-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-23gpio: of: Handle fixed regulator flags properlyLinus Walleij1-1/+2
This fixes up the handling of fixed regulator polarity inversion flags: while I remembered to fix it for the undocumented "reg-fixed-voltage" I forgot about the official "regulator-fixed" binding, there are two ways to do a fixed regulator. The error was noticed and fixed. Fixes: a603a2b8d86e ("gpio: of: Add special quirk to parse regulator flags") Cc: Mark Brown <broonie@kernel.org> Cc: Thierry Reding <thierry.reding@gmail.com> Reported-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-23ACPI: Convert ACPI reference args to generic fwnode reference argsSakari Ailus1-4/+7
Convert all users of struct acpi_reference_args to more generic fwnode_reference_args. This will 1) avoid an ACPI specific references to device nodes with integer arguments as well as 2) allow making references to nodes other than device nodes in ACPI. As a by-product, convert the fwnode interger arguments to u64. The arguments were 64-bit integers on ACPI but the fwnode arguments were just 32-bit. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-07-16gpiolib: remove an unnecessary TODOBartosz Golaszewski1-1/+1
It's actually fine to read values of output lines. This was also allowed by the legacy sysfs interface. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-16gpiolib: don't allow userspace to set values of input linesBartosz Golaszewski1-1/+7
User space can currently both read and set values of input lines using the character device. This was not allowed by the old sysfs interface nor is it a correct behavior. Check the first descriptor in the set for the OUT flag when asked to set values and return -EPERM if the line is input. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-13gpio: rcar: Implement .get_direction() callbackGeert Uytterhoeven1-0/+8
Allow gpiolib to read back the current I/O direction configuration by implementing the .get_direction() callback. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-13gpiolib: Join one line back for better readabilityAndy Shevchenko1-3/+1
One line in gpiolib_dbg_show() still fits 80 characters, so, join it to be like that in order to increase readability. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-13gpio: pxa: Fix potential NULL dereferenceWei Yongjun1-0/+2
platform_get_resource() may fail and return NULL, so we should better check it's return value to avoid a NULL pointer dereference a bit later in the code. This is detected by Coccinelle semantic patch. @@ expression pdev, res, n, t, e, e1, e2; @@ res = platform_get_resource(pdev, t, n); + if (!res) + return -EINVAL; ... when != res == NULL e = devm_ioremap(e1, res->start, e2); Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-13gpio: mt7621: add OF_GPIO dependencyArnd Bergmann1-0/+1
Compile-testing the driver fails unless OF_GPIO is enabled: drivers/gpio/gpio-mt7621.c: In function 'mediatek_gpio_bank_probe': drivers/gpio/gpio-mt7621.c:228:10: error: 'struct gpio_chip' has no member named 'of_node' Fixes: 4ba9c3afda41 ("gpio: mt7621: Add a driver for MT7621") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-13gpio: aspeed: fix compile testing warningArnd Bergmann1-1/+1
Gcc cannot always see that BUG_ON(1) is guaranteed to not return, so we get a warning message in some configurations: drivers/gpio/gpio-aspeed.c: In function 'bank_reg': drivers/gpio/gpio-aspeed.c:244:1: error: control reaches end of non-void function [-Werror=return-type] Using a plain BUG() is easier here and avoids the problem. Fixes: 44ddf559d579 ("gpio: aspeed: Rework register type accessors") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-13gpiolib: Consistent use of ->get_direction() inside gpiolibAndy Shevchenko1-6/+1
Two out of three calls to ->get_direction (excluding, of course, gpiod_get_direction() itself) are using gpiod_get_direction() and one is still open coded. Replace the latter one to use same API for sake of consistency. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-13gpiolib: Mark gpio_suffixes array with __maybe_unusedAndy Shevchenko1-1/+1
Since we put static variable to a header file it's copied to each module that includes the header. But not all of them are actually used it. Mark gpio_suffixes array with __maybe_unused to hide a compiler warning: In file included from drivers/gpio/gpiolib-legacy.c:6:0: drivers/gpio/gpiolib.h:95:27: warning: ‘gpio_suffixes’ defined but not used [-Wunused-const-variable=] static const char * const gpio_suffixes[] = { "gpios", "gpio" }; ^~~~~~~~~~~~~ In file included from drivers/gpio/gpiolib-devprop.c:17:0: drivers/gpio/gpiolib.h:95:27: warning: ‘gpio_suffixes’ defined but not used [-Wunused-const-variable=] static const char * const gpio_suffixes[] = { "gpios", "gpio" }; ^~~~~~~~~~~~~ Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-09gpiolib: Defer on non-DT find_chip_by_name() failureJanusz Krzysztofik1-3/+10
Avoid replication of error code conversion in non-DT GPIO consumers' code by returning -EPROBE_DEFER from gpiod_find() in case a chip identified by its label in a registered lookup table is not ready. See https://lkml.org/lkml/2018/5/30/176 for example case. Suggested-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-09gpiolib: Respect error code of ->get_direction()Andy Shevchenko1-0/+6
In case we try to lock GPIO pin as IRQ when something going wrong we print a misleading message. Correct this by checking an error code from ->get_direction() in gpiochip_lock_as_irq() and printing a corresponding message. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-09gpio: mt7621: Edit to preferred syntaxLinus Walleij1-44/+41
This fixes some syntactic nits that makes the GPIO maintainer happier. It is way easier to show by example and do it myself than to try to explain it with comments. It's just my personal taste of minimalism. Cc: Sergio Paracuellos <sergio.paracuellos@gmail.com> Cc: NeilBrown <neil@brown.name> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-29 13:59:40 +0000