| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Converted function to use folios throughout. This is in preparation for
the removal of find_get_pages_contig(). Now also supports large folios.
Since we may receive more than nr_pages pages, nr_pages may underflow.
Since nr_pages > 0 is equivalent to index <= end_index, we replaced it
with this check instead.
Also minor comment renaming for consistency in subpage.
Link: https://lkml.kernel.org/r/20220824004023.77310-5-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Acked-by: David Sterba <dsterb@suse.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Chris Mason <clm@fb.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Converted function to use folios throughout. This is in preparation for
the removal of find_get_pages_contig(). Now also supports large folios.
Since we may receive more than nr_pages pages, nr_pages may underflow.
Since nr_pages > 0 is equivalent to index <= end_index, we replaced it
with this check instead.
Also this function does not care about the pages being contiguous so we
can just use filemap_get_folios() to be more efficient.
Link: https://lkml.kernel.org/r/20220824004023.77310-4-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Acked-by: David Sterba <dsterba@suse.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Chris Mason <clm@fb.com>
Cc: David Sterba <dsterb@suse.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Convert to use folios throughout. This is in preparation for the removal
of find_get_pages_contig(). Now also supports large folios.
Since we may receive more than nr_pages pages, nr_pages may underflow.
Since nr_pages > 0 is equivalent to index <= end_index, we replaced it
with this check instead.
Link: https://lkml.kernel.org/r/20220824004023.77310-3-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Acked-by: David Sterba <dsterba@suse.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Chris Mason <clm@fb.com>
Cc: David Sterba <dsterb@suse.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Convert to filemap_get_folios_contig()", v3.
This patch series replaces find_get_pages_contig() with
filemap_get_folios_contig().
This patch (of 7):
This function is meant to replace find_get_pages_contig().
Unlike find_get_pages_contig(), filemap_get_folios_contig() no longer
takes in a target number of pages to find - It returns up to 15 contiguous
folios.
To be more consistent with filemap_get_folios(),
filemap_get_folios_contig() now also updates the start index passed in,
and takes an end index.
Link: https://lkml.kernel.org/r/20220824004023.77310-1-vishal.moola@gmail.com
Link: https://lkml.kernel.org/r/20220824004023.77310-2-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Sterba <dsterb@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
It doesn't make sense for us to retry to compress an uncompressible page
(comp_len == PAGE_SIZE) in zsmalloc slowpath, because we will be storing
it uncompressed anyway. We can avoid wasting time on another compression
attempt. It is enough to take lock (zcomp_stream_get) and execute the
code below.
Link: https://lkml.kernel.org/r/20220824113117.78849-1-avromanov@sberdevices.ru
Signed-off-by: Alexey Romanov <avromanov@sberdevices.ru>
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Alexey Romanov <avromanov@sberdevices.ru>
Cc: Dmitry Rokosov <DDRokosov@sberdevices.ru>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Return the value cgwb_bdi_init() directly instead of storing it in another
redundant variable.
Link: https://lkml.kernel.org/r/20220826071906.252419-1-ye.xingchen@zte.com.cn
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Reported-by: Zeal Robot <zealci@zte.com.cn>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In commit 2f1ee0913ce5 ("Revert "mm: use early_pfn_to_nid in
page_ext_init""), we call page_ext_init() after page_alloc_init_late() to
avoid some panic problem. It seems that we cannot track early page
allocations in current kernel even if page structure has been initialized
early.
This patch introduces a new boot parameter 'early_page_ext' to resolve
this problem. If we pass it to the kernel, page_ext_init() will be moved
up and the feature 'deferred initialization of struct pages' will be
disabled to initialize the page allocator early and prevent the panic
problem above. It can help us to catch early page allocations. This is
useful especially when we find that the free memory value is not the same
right after different kernel booting.
[akpm@linux-foundation.org: fix section issue by removing __meminitdata]
Link: https://lkml.kernel.org/r/20220825102714.669-1-lizhe.67@bytedance.com
Signed-off-by: Li Zhe <lizhe.67@bytedance.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When pud-sized hugepages were introduced for s390, the generic version of
follow_huge_pud() was using pte_page() instead of pud_page(). This would
be wrong for s390, see also commit 97534127012f ("mm/hugetlb: use
pmd_page() in follow_huge_pmd()"). Therefore, and probably because not
all archs were supporting pud_page() at that time, a private version of
follow_huge_pud() was added for s390, correctly using pud_page().
Since commit 3a194f3f8ad01 ("mm/hugetlb: make pud_huge() and
follow_huge_pud() aware of non-present pud entry"), the generic version of
follow_huge_pud() is now also using pud_page(), and in general behaves
similar to follow_huge_pmd().
Therefore we can now switch to the generic version and get rid of the
s390-specific follow_huge_pud().
Link: https://lkml.kernel.org/r/20220818135717.609eef8a@thinkpad
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Haiyue Wang <haiyue.wang@intel.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
For several years, MEMCG_CHARGE_BATCH was kept at 32 but with bigger
machines and the network intensive workloads requiring througput in Gbps,
32 is too small and makes the memcg charging path a bottleneck. For now,
increase it to 64 for easy acceptance to 6.0. We will need to revisit
this in future for ever increasing demand of higher performance.
Please note that the memcg charge path drain the per-cpu memcg charge
stock, so there should not be any oom behavior change. Though it does
have impact on rstat flushing and high limit reclaim backoff.
To evaluate the impact of this optimization, on a 72 CPUs machine, we
ran the following workload in a three level of cgroup hierarchy.
$ netserver -6
# 36 instances of netperf with following params
$ netperf -6 -H ::1 -l 60 -t TCP_SENDFILE -- -m 10K
Results (average throughput of netperf):
Without (6.0-rc1) 10482.7 Mbps
With patch 17064.7 Mbps (62.7% improvement)
With the patch, the throughput improved by 62.7%.
Link: https://lkml.kernel.org/r/20220825000506.239406-4-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Feng Tang <feng.tang@intel.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Michal Koutný" <mkoutny@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
With memcg v2 enabled, memcg->memory.usage is a very hot member for the
workloads doing memcg charging on multiple CPUs concurrently.
Particularly the network intensive workloads. In addition, there is a
false cache sharing between memory.usage and memory.high on the charge
path. This patch moves the usage into a separate cacheline and move all
the read most fields into separate cacheline.
To evaluate the impact of this optimization, on a 72 CPUs machine, we ran
the following workload in a three level of cgroup hierarchy.
$ netserver -6
# 36 instances of netperf with following params
$ netperf -6 -H ::1 -l 60 -t TCP_SENDFILE -- -m 10K
Results (average throughput of netperf):
Without (6.0-rc1) 10482.7 Mbps
With patch 12413.7 Mbps (18.4% improvement)
With the patch, the throughput improved by 18.4%.
One side-effect of this patch is the increase in the size of struct
mem_cgroup. For example with this patch on 64 bit build, the size of
struct mem_cgroup increased from 4032 bytes to 4416 bytes. However for
the performance improvement, this additional size is worth it. In
addition there are opportunities to reduce the size of struct mem_cgroup
like deprecation of kmem and tcpmem page counters and better packing.
Link: https://lkml.kernel.org/r/20220825000506.239406-3-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Reviewed-by: Feng Tang <feng.tang@intel.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Michal Koutný" <mkoutny@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "memcg: optimize charge codepath", v2.
Recently Linux networking stack has moved from a very old per socket
pre-charge caching to per-cpu caching to avoid pre-charge fragmentation
and unwarranted OOMs. One impact of this change is that for network
traffic workloads, memcg charging codepath can become a bottleneck. The
kernel test robot has also reported this regression[1]. This patch series
tries to improve the memcg charging for such workloads.
This patch series implement three optimizations:
(A) Reduce atomic ops in page counter update path.
(B) Change layout of struct page_counter to eliminate false sharing
between usage and high.
(C) Increase the memcg charge batch to 64.
To evaluate the impact of these optimizations, on a 72 CPUs machine, we
ran the following workload in root memcg and then compared with scenario
where the workload is run in a three level of cgroup hierarchy with top
level having min and low setup appropriately.
$ netserver -6
# 36 instances of netperf with following params
$ netperf -6 -H ::1 -l 60 -t TCP_SENDFILE -- -m 10K
Results (average throughput of netperf):
1. root memcg 21694.8 Mbps
2. 6.0-rc1 10482.7 Mbps (-51.6%)
3. 6.0-rc1 + (A) 14542.5 Mbps (-32.9%)
4. 6.0-rc1 + (B) 12413.7 Mbps (-42.7%)
5. 6.0-rc1 + (C) 17063.7 Mbps (-21.3%)
6. 6.0-rc1 + (A+B+C) 20120.3 Mbps (-7.2%)
With all three optimizations, the memcg overhead of this workload has
been reduced from 51.6% to just 7.2%.
[1] https://lore.kernel.org/linux-mm/20220619150456.GB34471@xsang-OptiPlex-9020/
This patch (of 3):
For cgroups using low or min protections, the function
propagate_protected_usage() was doing an atomic xchg() operation
irrespectively. We can optimize out this atomic operation for one
specific scenario where the workload is using the protection (i.e. min >
0) and the usage is above the protection (i.e. usage > min).
This scenario is actually very common where the users want a part of their
workload to be protected against the external reclaim. Though this
optimization does introduce a race when the usage is around the protection
and concurrent charges and uncharged trip it over or under the protection.
In such cases, we might see lower effective protection but the subsequent
charge/uncharge will correct it.
To evaluate the impact of this optimization, on a 72 CPUs machine, we ran
the following workload in a three level of cgroup hierarchy with top level
having min and low setup appropriately to see if this optimization is
effective for the mentioned case.
$ netserver -6
# 36 instances of netperf with following params
$ netperf -6 -H ::1 -l 60 -t TCP_SENDFILE -- -m 10K
Results (average throughput of netperf):
Without (6.0-rc1) 10482.7 Mbps
With patch 14542.5 Mbps (38.7% improvement)
With the patch, the throughput improved by 38.7%
Link: https://lkml.kernel.org/r/20220825000506.239406-1-shakeelb@google.com
Link: https://lkml.kernel.org/r/20220825000506.239406-2-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Feng Tang <feng.tang@intel.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Michal Koutný" <mkoutny@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Oliver Sang <oliver.sang@intel.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
zswap has been with us since 2013, and it's widely used in many products.
Link: https://lkml.kernel.org/r/20220823152033.66682-1-david@ixit.cz
Signed-off-by: David Heidelberg <david@ixit.cz>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Barry Song <song.bao.hua@hisilicon.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
reset
We do all reset operations under write lock, so we don't need to save
->disksize and ->comp to stack variables. Another thing is that ->comp is
freed during zram reset, but comp pointer is not NULL-ed, so zram keeps
the freed pointer value.
Link: https://lkml.kernel.org/r/20220824035100.971816-1-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When pinning pages with FOLL_LONGTERM check_and_migrate_movable_pages() is
called to migrate pages out of zones which should not contain any longterm
pinned pages.
When migration succeeds all pages will have been unpinned so pinning needs
to be retried. Migration can also fail, in which case the pages will also
have been unpinned but the operation should not be retried. If all pages
are in the correct zone nothing will be unpinned and no retry is required.
The logic in check_and_migrate_movable_pages() tracks unnecessary state
and the return codes for each case are difficult to follow. Refactor the
code to clean this up. No behaviour change is intended.
[akpm@linux-foundation.org: fix unused var warning]
Link: https://lkml.kernel.org/r/19583d1df07fdcb99cfa05c265588a3fa58d1902.1661317396.git-series.apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Alex Sierra <alex.sierra@amd.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Felix Kuehling <felix.kuehling@amd.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
gup_flags is passed to check_and_migrate_movable_pages() so that it can
call either put_page() or unpin_user_page() to drop the page reference.
However check_and_migrate_movable_pages() is only called for
FOLL_LONGTERM, which implies FOLL_PIN so there is no need to pass
gup_flags.
Link: https://lkml.kernel.org/r/d611c65a9008ff55887307df457c6c2220ad6163.1661317396.git-series.apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Alex Sierra <alex.sierra@amd.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Felix Kuehling <felix.kuehling@amd.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In page_counter_set_max, we want to make sure the new limit is not below
the concurrently-changing counter value. We read the counter and check
that the limit is not below the counter before the swap. After the swap,
we read the counter again and retry in case the counter is incremented as
this may violate the requirement. Even though the page_counter_try_charge
can see the old limit, it is guaranteed that the counter is not above the
old limit after the increment. So in case the new limit is not below the
old limit, the counter is guaranteed to be not above the new limit too.
We can skip the retry in this case to optimize a little bit.
Link: https://lkml.kernel.org/r/20220821154055.109635-1-minhquangbui99@gmail.com
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Link: https://lkml.kernel.org/r/8991525.CDJkKcVGEf@devpool047
Signed-off-by: Rolf Eike Beer <eb@emlix.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Empty PTEs are passed to the pte_entry callback, not to pte_hole.
Link: https://lkml.kernel.org/r/3695521.kQq0lBPeGt@devpool047
Signed-off-by: Rolf Eike Beer <eb@emlix.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Workingset refault stats are important and useful metrics to measure how
well reclaimer and swapping work and how healthy the services are, but
they are just available for cgroup v2. There are still plenty users with
cgroup v1, export the stats for cgroup v1.
Link: https://lkml.kernel.org/r/20220816185801.651091-1-shy828301@gmail.com
Signed-off-by: Yang Shi <shy828301@gmail.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
It is too slow to dump all the pages, in some usage we just want to dump a
given start pfn, for example: a CMA range or a single page.
To speed up and save time, this change allows specifying of a start pfn by
adding llseek for page_owner.
Link: https://lkml.kernel.org/r/20220818022425.31056-1-quic_yingangl@quicinc.com
Signed-off-by: Kassey Li <quic_yingangl@quicinc.com>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
pmd_huge() is usually used to indicate a pmd level hugetlb. However a pmd
mapped huge page can only be THP in damon_mkold_pmd_entry() or
damon_young_pmd_entry(), so replace pmd_huge() with pmd_trans_huge() in
this case to make the code more readable according to the discussion [1].
[1] https://lore.kernel.org/all/098c1480-416d-bca9-cedb-ca495df69b64@linux.alibaba.com/
Link: https://lkml.kernel.org/r/a9e010ca5d299e18d740c7c52290ecb6a014dde6.1660805030.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
pmd_huge() is used to validate if the pmd entry is mapped by a huge page,
also including the case of non-present (migration or hwpoisoned) pmd entry
on arm64 or x86 architectures. This means that pmd_pfn() can not get the
correct pfn number for a non-present pmd entry, which will cause
damon_get_page() to get an incorrect page struct (also may be NULL by
pfn_to_online_page()), making the access statistics incorrect.
This means that the DAMON may make incorrect decision according to the
incorrect statistics, for example, DAMON may can not reclaim cold page
in time due to this cold page was regarded as accessed mistakenly if
DAMOS_PAGEOUT operation is specified.
Moreover it does not make sense that we still waste time to get the page
of the non-present entry. Just treat it as not-accessed and skip it,
which maintains consistency with non-present pte level entries.
So add pmd entry present validation to fix the above issues.
Link: https://lkml.kernel.org/r/58b1d1f5fbda7db49ca886d9ef6783e3dcbbbc98.1660805030.git.baolin.wang@linux.alibaba.com
Fixes: 3f49584b262c ("mm/damon: implement primitives for the virtual memory address spaces")
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If there is private data attached to a THP, the refcount of THP will be
increased and will prevent the THP from being split. Attempt to release
any private data attached to the THP before attempting the split to
increase the chance of splitting successfully.
There was a memory failure issue hit during HW error injection testing
with 5.18 kernel + xfs as rootfs. The test was killed and a system reboot
was required to re-run the test.
The issue was tracked down to a THP split failure caused by the memory
failure not being handled. The page dump showed:
[ 1785.433075] page:0000000025f9530b refcount:18 mapcount:0 mapping:000000008162eea7 index:0xa10 pfn:0x2f0200
[ 1785.443954] head:0000000025f9530b order:4 compound_mapcount:0 compound_pincount:0
[ 1785.452408] memcg:ff4247f2d28e9000
[ 1785.456304] aops:xfs_address_space_operations ino:8555182 dentry name:"baseos-filenames.solvx"
[ 1785.466612] flags: 0x1000000000012036(referenced|uptodate|lru|active|private|head|node=0|zone=2)
[ 1785.476514] raw: 1000000000012036 ffb9460f8bc07c08 ffb9460f8bc08408 ff4247f22e6299f8
[ 1785.485268] raw: 0000000000000a10 ff4247f194ade900 00000012ffffffff ff4247f2d28e9000
It was like the error was injected to a large folio for xfs with private
data attached.
With private data released before splitting the THP, the test case could
be run successfully many times without rebooting the system.
Link: https://lkml.kernel.org/r/20220810064907.582899-1-fengwei.yin@intel.com
Co-developed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When the pgtable is NULL in the set_huge_zero_page(), we should not
increment the count of PTE page table pages by calling mm_inc_nr_ptes().
Otherwise we may receive the following warning when the mm exits:
BUG: non-zero pgtables_bytes on freeing mm
Now we can't observe the above warning since only
do_huge_pmd_anonymous_page() invokes set_huge_zero_page() and the pgtable
can not be NULL.
Therefore, instead of moving mm_inc_nr_ptes() to the non-NULL branch of
pgtable, it is better to remove the redundant pgtable check directly.
Link: https://lkml.kernel.org/r/20220818082748.40021-1-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Squash the __soft_offline_page() into soft_offline_in_use_page() and kill
__soft_offline_page().
[wangkefeng.wang@huawei.com: update hpage when try_to_split_thp_page() succeeds]
Link: https://lkml.kernel.org/r/20220830104654.28234-1-wangkefeng.wang@huawei.com
Link: https://lkml.kernel.org/r/20220819033402.156519-2-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Open-code the page_handle_poison() into soft_offline_page() and kill
unneeded soft_offline_free_page().
Link: https://lkml.kernel.org/r/20220819033402.156519-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We can choose to copy three contiguous tail pages' content to the first
three pages instead of copying one by one to simplify the code and reduce
code size from 229 bytes to 63 bytes. The BUILD_BUG_ON() aims to avoid
out-of-bounds accesses.
Link: https://lkml.kernel.org/r/20220819035532.6189-1-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
For reserved pages, HWPoison flag will be set without increasing the page
refcnt. So we shouldn't even try to unpoison these pages and thus
decrease the page refcnt unexpectly. Add a PageReserved() check to filter
this case out and remove the below unneeded zero page (zero page is
reserved) check.
Link: https://lkml.kernel.org/r/20220818130016.45313-7-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If try_to_unmap() fails, the hwpoisoned page still resides in the address
space of some processes. We should kill these processes or the hwpoisoned
page might be consumed later. collect_procs() is always called to collect
relevant processes now so they can be killed later if unmap fails.
[linmiaohe@huawei.com: v2]
Link: https://lkml.kernel.org/r/20220823032346.4260-6-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20220818130016.45313-6-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
After kill_procs(), tk will be freed without being removed from the
to_kill list. In the next iteration, the freed list entry in the to_kill
list will be accessed, thus leading to use-after-free issue. Adding
list_del() in kill_procs() to fix the issue.
Link: https://lkml.kernel.org/r/20220823032346.4260-5-linmiaohe@huawei.com
Fixes: c36e20249571 ("mm: introduce mf_dax_kill_procs() for fsdax case")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When hwpoison_filter() refuses to soft offline a page, the page refcnt
incremented previously by MF_COUNT_INCREASED would have been consumed via
get_hwpoison_page() if ret <= 0. So the put_ref_page() here will put the
extra one. Remove it to fix the issue.
Link: https://lkml.kernel.org/r/20220818130016.45313-4-linmiaohe@huawei.com
Fixes: 9113eaf331bf ("mm/memory-failure.c: add hwpoison_filter for soft offline")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When free_raw_hwp_pages() fails its work, the refcnt of the hugetlb page
would have been incremented if ret > 0. Using put_page() to fix refcnt
leaking in this case.
Link: https://lkml.kernel.org/r/20220818130016.45313-3-linmiaohe@huawei.com
Fixes: debb6b9c3fdd ("mm, hwpoison: make unpoison aware of raw error info in hwpoisoned hugepage")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "A few fixup patches for memory-failure", v2.
This series contains a few fixup patches to fix incorrect update of page
refcnt, fix possible use-after-free issue and so on. More details can be
found in the respective changelogs.
This patch (of 6):
When hwpoison_filter() refuses to hwpoison a hugetlb page, the refcnt of
the page would have been incremented if res == 1. Using put_page() to fix
the refcnt leaking in this case.
Link: https://lkml.kernel.org/r/20220823032346.4260-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20220818130016.45313-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20220818130016.45313-2-linmiaohe@huawei.com
Fixes: 405ce051236c ("mm/hwpoison: fix race between hugetlb free/demotion and memory_failure_hugetlb()")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The below is one path where race between page_ext and offline of the
respective memory blocks will cause use-after-free on the access of
page_ext structure.
process1 process2
--------- ---------
a)doing /proc/page_owner doing memory offline
through offline_pages.
b) PageBuddy check is failed
thus proceed to get the
page_owner information
through page_ext access.
page_ext = lookup_page_ext(page);
migrate_pages();
.................
Since all pages are successfully
migrated as part of the offline
operation,send MEM_OFFLINE notification
where for page_ext it calls:
offline_page_ext()-->
__free_page_ext()-->
free_page_ext()-->
vfree(ms->page_ext)
mem_section->page_ext = NULL
c) Check for the PAGE_EXT
flags in the page_ext->flags
access results into the
use-after-free (leading to
the translation faults).
As mentioned above, there is really no synchronization between page_ext
access and its freeing in the memory_offline.
The memory offline steps(roughly) on a memory block is as below:
1) Isolate all the pages
2) while(1)
try free the pages to buddy.(->free_list[MIGRATE_ISOLATE])
3) delete the pages from this buddy list.
4) Then free page_ext.(Note: The struct page is still alive as it is
freed only during hot remove of the memory which frees the memmap,
which steps the user might not perform).
This design leads to the state where struct page is alive but the struct
page_ext is freed, where the later is ideally part of the former which
just representing the page_flags (check [3] for why this design is
chosen).
The abovementioned race is just one example __but the problem persists in
the other paths too involving page_ext->flags access(eg:
page_is_idle())__.
Fix all the paths where offline races with page_ext access by maintaining
synchronization with rcu lock and is achieved in 3 steps:
1) Invalidate all the page_ext's of the sections of a memory block by
storing a flag in the LSB of mem_section->page_ext.
2) Wait until all the existing readers to finish working with the
->page_ext's with synchronize_rcu(). Any parallel process that starts
after this call will not get page_ext, through lookup_page_ext(), for
the block parallel offline operation is being performed.
3) Now safely free all sections ->page_ext's of the block on which
offline operation is being performed.
Note: If synchronize_rcu() takes time then optimizations can be done in
this path through call_rcu()[2].
Thanks to David Hildenbrand for his views/suggestions on the initial
discussion[1] and Pavan kondeti for various inputs on this patch.
[1] https://lore.kernel.org/linux-mm/59edde13-4167-8550-86f0-11fc67882107@quicinc.com/
[2] https://lore.kernel.org/all/a26ce299-aed1-b8ad-711e-a49e82bdd180@quicinc.com/T/#u
[3] https://lore.kernel.org/all/6fa6b7aa-731e-891c-3efb-a03d6a700efa@redhat.com/
[quic_charante@quicinc.com: rename label `loop' to `ext_put_continue' per David]
Link: https://lkml.kernel.org/r/1661496993-11473-1-git-send-email-quic_charante@quicinc.com
Link: https://lkml.kernel.org/r/1660830600-9068-1-git-send-email-quic_charante@quicinc.com
Signed-off-by: Charan Teja Kalla <quic_charante@quicinc.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Fernand Sieber <sieberf@amazon.com>
Cc: Minchan Kim <minchan@google.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Pavan Kondeti <quic_pkondeti@quicinc.com>
Cc: SeongJae Park <sjpark@amazon.de>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If the pages being mapped are in HIGHMEM, page_address() returns NULL.
This probably wasn't noticed before because there aren't currently any
architectures with HAVE_ARCH_HUGE_VMALLOC and HIGHMEM, but it's simpler to
call page_to_phys() and futureproofs us against such configurations
existing.
Link: https://lkml.kernel.org/r/Yv6qHc6e+m7TMWhi@casper.infradead.org
Fixes: 121e6f3258fe ("mm/vmalloc: hugepage vmalloc mappings")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Uladzislau Rezki <urezki@gmail.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Fix a spelling mistake in comment.
Link: https://lkml.kernel.org/r/20220815065102.74347-1-xu.panda@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: xupanda <xu.panda@zte.com.cn>
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
find_min_pfn_with_active_regions() is only called from free_area_init().
Open-code the PHYS_PFN(memblock_start_of_DRAM()) into free_area_init(),
and kill find_min_pfn_with_active_regions().
Link: https://lkml.kernel.org/r/20220815111017.39341-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This Kconfig option is used by individual arch to set its desired
MAX_ORDER. Rename it to reflect its actual use.
Link: https://lkml.kernel.org/r/20220815143959.1511278-1-zi.yan@sent.com
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Zi Yan <ziy@nvidia.com>
Acked-by: Guo Ren <guoren@kernel.org> [csky]
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Acked-by: Huacai Chen <chenhuacai@kernel.org> [LoongArch]
Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Taichi Sugaya <sugaya.taichi@socionext.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Qin Jian <qinjian@cqplus1.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Zankel <chris@zankel.net>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Emails are not documentation.
[akpm@linux-foundation.org: fix whitespace damage, repair doc reference]
[akpm@linux-foundation.org: coding-style cleanups]
Link: https://lkml.kernel.org/r/20220815144825.39001-1-avromanov@sberdevices.ru
Signed-off-by: Alexey Romanov <avromanov@sberdevices.ru>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If the pagetables are shared, we shouldn't copy or take references. Since
src could have unshared and dst shares with another vma, huge_pte_none()
is thus used to determine whether dst_pte is shared. But this check isn't
reliable. A shared pte could have pte none in pagetable in fact. The
page count of ptep page should be checked here in order to reliably
determine whether pte is shared.
[lukas.bulwahn@gmail.com: remove unused local variable dst_entry in copy_hugetlb_page_range()]
Link: https://lkml.kernel.org/r/20220822082525.26071-1-lukas.bulwahn@gmail.com
Link: https://lkml.kernel.org/r/20220816130553.31406-7-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The sysfs group per_node_hstate_attr_group and hstate_demote_attr_group
when h->demote_order != 0 are created in hugetlb_register_node(). But
these sysfs groups are not removed when unregister the node, thus sysfs
group is leaked. Using sysfs_remove_group() to fix this issue.
Link: https://lkml.kernel.org/r/20220816130553.31406-6-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Fengwei Yin <fengwei.yin@intel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The memory barrier smp_wmb() is needed to make sure that preceding stores
to the page contents become visible before the below set_pte_at() write.
Link: https://lkml.kernel.org/r/20220816130553.31406-5-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When huge_add_to_page_cache() fails, the page is freed directly without
calling restore_reserve_on_error() to restore reserve for newly allocated
pages not in page cache. Fix this by calling restore_reserve_on_error()
when huge_add_to_page_cache fails.
[linmiaohe@huawei.com: remove err == -EEXIST check and retry logic]
Link: https://lkml.kernel.org/r/20220823030209.57434-4-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20220816130553.31406-4-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If sysfs_create_group() fails with hstate_attr_group, hstate_kobjs[hi]
will be set to NULL. Then it will be passed to sysfs_create_group() if
h->demote_order != 0 thus triggering WARN_ON(!kobj) check. Fix this by
making sure hstate_kobjs[hi] != NULL when calling sysfs_create_group.
Link: https://lkml.kernel.org/r/20220816130553.31406-3-linmiaohe@huawei.com
Fixes: 79dfc695525f ("hugetlb: add demote hugetlb page sysfs interfaces")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "A few fixup patches for hugetlb".
This series contains a few fixup patches to fix incorrect update of
max_huge_pages, fix WARN_ON(!kobj) in sysfs_create_group() and so on.
More details can be found in the respective changelogs.
This patch (of 6):
There should be pages_per_huge_page(h) /
pages_per_huge_page(target_hstate) pages incremented for
target_hstate->max_huge_pages when page is demoted. Update max_huge_pages
accordingly for consistency.
Link: https://lkml.kernel.org/r/20220816130553.31406-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20220816130553.31406-2-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The promotion hot threshold is workload and system configuration
dependent. So in this patch, a method to adjust the hot threshold
automatically is implemented. The basic idea is to control the number of
the candidate promotion pages to match the promotion rate limit. If the
hint page fault latency of a page is less than the hot threshold, we will
try to promote the page, and the page is called the candidate promotion
page.
If the number of the candidate promotion pages in the statistics interval
is much more than the promotion rate limit, the hot threshold will be
decreased to reduce the number of the candidate promotion pages.
Otherwise, the hot threshold will be increased to increase the number of
the candidate promotion pages.
To make the above method works, in each statistics interval, the total
number of the pages to check (on which the hint page faults occur) and the
hot/cold distribution need to be stable. Because the page tables are
scanned linearly in NUMA balancing, but the hot/cold distribution isn't
uniform along the address usually, the statistics interval should be
larger than the NUMA balancing scan period. So in the patch, the max scan
period is used as statistics interval and it works well in our tests.
Link: https://lkml.kernel.org/r/20220713083954.34196-4-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: osalvador <osalvador@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zhong Jiang <zhongjiang-ali@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In NUMA balancing memory tiering mode, if there are hot pages in slow
memory node and cold pages in fast memory node, we need to promote/demote
hot/cold pages between the fast and cold memory nodes.
A choice is to promote/demote as fast as possible. But the CPU cycles and
memory bandwidth consumed by the high promoting/demoting throughput will
hurt the latency of some workload because of accessing inflating and slow
memory bandwidth contention.
A way to resolve this issue is to restrict the max promoting/demoting
throughput. It will take longer to finish the promoting/demoting. But
the workload latency will be better. This is implemented in this patch as
the page promotion rate limit mechanism.
The number of the candidate pages to be promoted to the fast memory node
via NUMA balancing is counted, if the count exceeds the limit specified by
the users, the NUMA balancing promotion will be stopped until the next
second.
A new sysctl knob kernel.numa_balancing_promote_rate_limit_MBps is added
for the users to specify the limit.
Link: https://lkml.kernel.org/r/20220713083954.34196-3-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: osalvador <osalvador@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zhong Jiang <zhongjiang-ali@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "memory tiering: hot page selection", v4.
To optimize page placement in a memory tiering system with NUMA balancing,
the hot pages in the slow memory nodes need to be identified.
Essentially, the original NUMA balancing implementation selects the mostly
recently accessed (MRU) pages to promote. But this isn't a perfect
algorithm to identify the hot pages. Because the pages with quite low
access frequency may be accessed eventually given the NUMA balancing page
table scanning period could be quite long (e.g. 60 seconds). So in this
patchset, we implement a new hot page identification algorithm based on
the latency between NUMA balancing page table scanning and hint page
fault. Which is a kind of mostly frequently accessed (MFU) algorithm.
In NUMA balancing memory tiering mode, if there are hot pages in slow
memory node and cold pages in fast memory node, we need to promote/demote
hot/cold pages between the fast and cold memory nodes.
A choice is to promote/demote as fast as possible. But the CPU cycles and
memory bandwidth consumed by the high promoting/demoting throughput will
hurt the latency of some workload because of accessing inflating and slow
memory bandwidth contention.
A way to resolve this issue is to restrict the max promoting/demoting
throughput. It will take longer to finish the promoting/demoting. But
the workload latency will be better. This is implemented in this patchset
as the page promotion rate limit mechanism.
The promotion hot threshold is workload and system configuration
dependent. So in this patchset, a method to adjust the hot threshold
automatically is implemented. The basic idea is to control the number of
the candidate promotion pages to match the promotion rate limit.
We used the pmbench memory accessing benchmark tested the patchset on a
2-socket server system with DRAM and PMEM installed. The test results are
as follows,
pmbench score promote rate
(accesses/s) MB/s
------------- ------------
base 146887704.1 725.6
hot selection 165695601.2 544.0
rate limit 162814569.8 165.2
auto adjustment 170495294.0 136.9
From the results above,
With hot page selection patch [1/3], the pmbench score increases about
12.8%, and promote rate (overhead) decreases about 25.0%, compared with
base kernel.
With rate limit patch [2/3], pmbench score decreases about 1.7%, and
promote rate decreases about 69.6%, compared with hot page selection
patch.
With threshold auto adjustment patch [3/3], pmbench score increases about
4.7%, and promote rate decrease about 17.1%, compared with rate limit
patch.
Baolin helped to test the patchset with MySQL on a machine which contains
1 DRAM node (30G) and 1 PMEM node (126G).
sysbench /usr/share/sysbench/oltp_read_write.lua \
......
--tables=200 \
--table-size=1000000 \
--report-interval=10 \
--threads=16 \
--time=120
The tps can be improved about 5%.
This patch (of 3):
To optimize page placement in a memory tiering system with NUMA balancing,
the hot pages in the slow memory node need to be identified. Essentially,
the original NUMA balancing implementation selects the mostly recently
accessed (MRU) pages to promote. But this isn't a perfect algorithm to
identify the hot pages. Because the pages with quite low access frequency
may be accessed eventually given the NUMA balancing page table scanning
period could be quite long (e.g. 60 seconds). The most frequently
accessed (MFU) algorithm is better.
So, in this patch we implemented a better hot page selection algorithm.
Which is based on NUMA balancing page table scanning and hint page fault
as follows,
- When the page tables of the processes are scanned to change PTE/PMD
to be PROT_NONE, the current time is recorded in struct page as scan
time.
- When the page is accessed, hint page fault will occur. The scan
time is gotten from the struct page. And The hint page fault
latency is defined as
hint page fault time - scan time
The shorter the hint page fault latency of a page is, the higher the
probability of their access frequency to be higher. So the hint page
fault latency is a better estimation of the page hot/cold.
It's hard to find some extra space in struct page to hold the scan time.
Fortunately, we can reuse some bits used by the original NUMA balancing.
NUMA balancing uses some bits in struct page to store the page accessing
CPU and PID (referring to page_cpupid_xchg_last()). Which is used by the
multi-stage node selection algorithm to avoid to migrate pages shared
accessed by the NUMA nodes back and forth. But for pages in the slow
memory node, even if they are shared accessed by multiple NUMA nodes, as
long as the pages are hot, they need to be promoted to the fast memory
node. So the accessing CPU and PID information are unnecessary for the
slow memory pages. We can reuse these bits in struct page to record the
scan time. For the fast memory pages, these bits are used as before.
For the hot threshold, the default value is 1 second, which works well in
our performance test. All pages with hint page fault latency < hot
threshold will be considered hot.
It's hard for users to determine the hot threshold. So we don't provide a
kernel ABI to set it, just provide a debugfs interface for advanced users
to experiment. We will continue to work on a hot threshold automatic
adjustment mechanism.
The downside of the above method is that the response time to the workload
hot spot changing may be much longer. For example,
- A previous cold memory area becomes hot
- The hint page fault will be triggered. But the hint page fault
latency isn't shorter than the hot threshold. So the pages will
not be promoted.
- When the memory area is scanned again, maybe after a scan period,
the hint page fault latency measured will be shorter than the hot
threshold and the pages will be promoted.
To mitigate this, if there are enough free space in the fast memory node,
the hot threshold will not be used, all pages will be promoted upon the
hint page fault for fast response.
Thanks Zhong Jiang reported and tested the fix for a bug when disabling
memory tiering mode dynamically.
Link: https://lkml.kernel.org/r/20220713083954.34196-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20220713083954.34196-2-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Wei Xu <weixugc@google.com>
Cc: osalvador <osalvador@suse.de>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Zhong Jiang <zhongjiang-ali@linux.alibaba.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If a process has not enough memory to allocate a new virtual mapping, we
may meet verious kinds of error, eg, fork cannot allocate memory, SIGBUS
error in shmem, but it is difficult to confirm them, let's add some debug
information to easily to check this scenario if __vm_enough_memory fails.
Link: https://lkml.kernel.org/r/20220726145428.8030-1-wangkefeng.wang@huawei.com
Reported-by: Yongqiang Liu <liuyongqiang13@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
gfp_migratetype() also expects GFP_RECLAIMABLE and
GFP_MOVABLE|GFP_RECLAIMABLE to be shiftable into MIGRATE_* enum values, so
add some more BUILD_BUG_ONs to reflect this assumption.
Link: https://linux-review.googlesource.com/id/Iae64e2182f75c3aca776a486b71a72571d66d83e
Link: https://lkml.kernel.org/r/20220726230241.3770532-1-pcc@google.com
Signed-off-by: Peter Collingbourne <pcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
