diff options
author | Boris Brezillon <boris.brezillon@free-electrons.com> | 2014-10-07 15:38:14 +0200 |
---|---|---|
committer | Thierry Reding <thierry.reding@gmail.com> | 2014-11-17 12:20:17 +0100 |
commit | 2b4984bef47a5920bb6ed7f5ede90d8302fee554 (patch) | |
tree | 07319c788ca2bee51ddb822be46e586dad32c746 /drivers/pwm | |
parent | e5a06dc5ac1f686d11b11488a88a63ab12e079cb (diff) | |
download | linux-rpi-2b4984bef47a5920bb6ed7f5ede90d8302fee554.tar.gz linux-rpi-2b4984bef47a5920bb6ed7f5ede90d8302fee554.tar.bz2 linux-rpi-2b4984bef47a5920bb6ed7f5ede90d8302fee554.zip |
pwm: add support for atmel-hlcdc-pwm device
The HLCDC IP available in some Atmel SoCs (i.e. at91sam9x5, at91sam9n12
or sama5d3 families for instance) provides a PWM device.
This driver add support for a PWM chip exposing a single PWM device (which
will most likely be used to drive a backlight device).
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Tested-by: Anthony Harivel <anthony.harivel@emtrion.de>
Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Diffstat (limited to 'drivers/pwm')
-rw-r--r-- | drivers/pwm/Kconfig | 11 | ||||
-rw-r--r-- | drivers/pwm/Makefile | 1 | ||||
-rw-r--r-- | drivers/pwm/pwm-atmel-hlcdc.c | 259 |
3 files changed, 271 insertions, 0 deletions
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig index ddabe3983549..847a57d2cf1c 100644 --- a/drivers/pwm/Kconfig +++ b/drivers/pwm/Kconfig @@ -50,6 +50,17 @@ config PWM_ATMEL To compile this driver as a module, choose M here: the module will be called pwm-atmel. +config PWM_ATMEL_HLCDC_PWM + tristate "Atmel HLCDC PWM support" + depends on MFD_ATMEL_HLCDC + help + Generic PWM framework driver for the PWM output of the HLCDC + (Atmel High-end LCD Controller). This PWM output is mainly used + to control the LCD backlight. + + To compile this driver as a module, choose M here: the module + will be called pwm-atmel-hlcdc. + config PWM_ATMEL_TCB tristate "Atmel TC Block PWM support" depends on ATMEL_TCLIB && OF diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile index 88be33bbfdf6..65259ac1e8de 100644 --- a/drivers/pwm/Makefile +++ b/drivers/pwm/Makefile @@ -2,6 +2,7 @@ obj-$(CONFIG_PWM) += core.o obj-$(CONFIG_PWM_SYSFS) += sysfs.o obj-$(CONFIG_PWM_AB8500) += pwm-ab8500.o obj-$(CONFIG_PWM_ATMEL) += pwm-atmel.o +obj-$(CONFIG_PWM_ATMEL_HLCDC_PWM) += pwm-atmel-hlcdc.o obj-$(CONFIG_PWM_ATMEL_TCB) += pwm-atmel-tcb.o obj-$(CONFIG_PWM_BCM_KONA) += pwm-bcm-kona.o obj-$(CONFIG_PWM_BCM2835) += pwm-bcm2835.o diff --git a/drivers/pwm/pwm-atmel-hlcdc.c b/drivers/pwm/pwm-atmel-hlcdc.c new file mode 100644 index 000000000000..eaf8b12ce1e5 --- /dev/null +++ b/drivers/pwm/pwm-atmel-hlcdc.c @@ -0,0 +1,259 @@ +/* + * Copyright (C) 2014 Free Electrons + * Copyright (C) 2014 Atmel + * + * Author: Boris BREZILLON <boris.brezillon@free-electrons.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/mfd/atmel-hlcdc.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/pwm.h> +#include <linux/regmap.h> + +#define ATMEL_HLCDC_PWMCVAL_MASK GENMASK(15, 8) +#define ATMEL_HLCDC_PWMCVAL(x) (((x) << 8) & ATMEL_HLCDC_PWMCVAL_MASK) +#define ATMEL_HLCDC_PWMPOL BIT(4) +#define ATMEL_HLCDC_PWMPS_MASK GENMASK(2, 0) +#define ATMEL_HLCDC_PWMPS_MAX 0x6 +#define ATMEL_HLCDC_PWMPS(x) ((x) & ATMEL_HLCDC_PWMPS_MASK) + +struct atmel_hlcdc_pwm { + struct pwm_chip chip; + struct atmel_hlcdc *hlcdc; + struct clk *cur_clk; +}; + +static inline struct atmel_hlcdc_pwm *to_atmel_hlcdc_pwm(struct pwm_chip *chip) +{ + return container_of(chip, struct atmel_hlcdc_pwm, chip); +} + +static int atmel_hlcdc_pwm_config(struct pwm_chip *c, + struct pwm_device *pwm, + int duty_ns, int period_ns) +{ + struct atmel_hlcdc_pwm *chip = to_atmel_hlcdc_pwm(c); + struct atmel_hlcdc *hlcdc = chip->hlcdc; + struct clk *new_clk = hlcdc->slow_clk; + u64 pwmcval = duty_ns * 256; + unsigned long clk_freq; + u64 clk_period_ns; + u32 pwmcfg; + int pres; + + clk_freq = clk_get_rate(new_clk); + clk_period_ns = (u64)NSEC_PER_SEC * 256; + do_div(clk_period_ns, clk_freq); + + if (clk_period_ns > period_ns) { + new_clk = hlcdc->sys_clk; + clk_freq = clk_get_rate(new_clk); + clk_period_ns = (u64)NSEC_PER_SEC * 256; + do_div(clk_period_ns, clk_freq); + } + + for (pres = 0; pres <= ATMEL_HLCDC_PWMPS_MAX; pres++) + if ((clk_period_ns << pres) >= period_ns) + break; + + if (pres > ATMEL_HLCDC_PWMPS_MAX) + return -EINVAL; + + pwmcfg = ATMEL_HLCDC_PWMPS(pres); + + if (new_clk != chip->cur_clk) { + u32 gencfg = 0; + int ret; + + ret = clk_prepare_enable(new_clk); + if (ret) + return ret; + + clk_disable_unprepare(chip->cur_clk); + chip->cur_clk = new_clk; + + if (new_clk == hlcdc->sys_clk) + gencfg = ATMEL_HLCDC_CLKPWMSEL; + + ret = regmap_update_bits(hlcdc->regmap, ATMEL_HLCDC_CFG(0), + ATMEL_HLCDC_CLKPWMSEL, gencfg); + if (ret) + return ret; + } + + do_div(pwmcval, period_ns); + + /* + * The PWM duty cycle is configurable from 0/256 to 255/256 of the + * period cycle. Hence we can't set a duty cycle occupying the + * whole period cycle if we're asked to. + * Set it to 255 if pwmcval is greater than 256. + */ + if (pwmcval > 255) + pwmcval = 255; + + pwmcfg |= ATMEL_HLCDC_PWMCVAL(pwmcval); + + return regmap_update_bits(hlcdc->regmap, ATMEL_HLCDC_CFG(6), + ATMEL_HLCDC_PWMCVAL_MASK | + ATMEL_HLCDC_PWMPS_MASK, + pwmcfg); +} + +static int atmel_hlcdc_pwm_set_polarity(struct pwm_chip *c, + struct pwm_device *pwm, + enum pwm_polarity polarity) +{ + struct atmel_hlcdc_pwm *chip = to_atmel_hlcdc_pwm(c); + struct atmel_hlcdc *hlcdc = chip->hlcdc; + u32 cfg = 0; + + if (polarity == PWM_POLARITY_NORMAL) + cfg = ATMEL_HLCDC_PWMPOL; + + return regmap_update_bits(hlcdc->regmap, ATMEL_HLCDC_CFG(6), + ATMEL_HLCDC_PWMPOL, cfg); +} + +static int atmel_hlcdc_pwm_enable(struct pwm_chip *c, struct pwm_device *pwm) +{ + struct atmel_hlcdc_pwm *chip = to_atmel_hlcdc_pwm(c); + struct atmel_hlcdc *hlcdc = chip->hlcdc; + u32 status; + int ret; + + ret = regmap_write(hlcdc->regmap, ATMEL_HLCDC_EN, ATMEL_HLCDC_PWM); + if (ret) + return ret; + + while (true) { + ret = regmap_read(hlcdc->regmap, ATMEL_HLCDC_SR, &status); + if (ret) + return ret; + + if ((status & ATMEL_HLCDC_PWM) != 0) + break; + + usleep_range(1, 10); + } + + return 0; +} + +static void atmel_hlcdc_pwm_disable(struct pwm_chip *c, + struct pwm_device *pwm) +{ + struct atmel_hlcdc_pwm *chip = to_atmel_hlcdc_pwm(c); + struct atmel_hlcdc *hlcdc = chip->hlcdc; + u32 status; + int ret; + + ret = regmap_write(hlcdc->regmap, ATMEL_HLCDC_DIS, ATMEL_HLCDC_PWM); + if (ret) + return; + + while (true) { + ret = regmap_read(hlcdc->regmap, ATMEL_HLCDC_SR, &status); + if (ret) + return; + + if ((status & ATMEL_HLCDC_PWM) == 0) + break; + + usleep_range(1, 10); + } +} + +static const struct pwm_ops atmel_hlcdc_pwm_ops = { + .config = atmel_hlcdc_pwm_config, + .set_polarity = atmel_hlcdc_pwm_set_polarity, + .enable = atmel_hlcdc_pwm_enable, + .disable = atmel_hlcdc_pwm_disable, + .owner = THIS_MODULE, +}; + +static int atmel_hlcdc_pwm_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct atmel_hlcdc_pwm *chip; + struct atmel_hlcdc *hlcdc; + int ret; + + hlcdc = dev_get_drvdata(dev->parent); + + chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + ret = clk_prepare_enable(hlcdc->periph_clk); + if (ret) + return ret; + + chip->hlcdc = hlcdc; + chip->chip.ops = &atmel_hlcdc_pwm_ops; + chip->chip.dev = dev; + chip->chip.base = -1; + chip->chip.npwm = 1; + chip->chip.of_xlate = of_pwm_xlate_with_flags; + chip->chip.of_pwm_n_cells = 3; + chip->chip.can_sleep = 1; + + ret = pwmchip_add(&chip->chip); + if (ret) { + clk_disable_unprepare(hlcdc->periph_clk); + return ret; + } + + platform_set_drvdata(pdev, chip); + + return 0; +} + +static int atmel_hlcdc_pwm_remove(struct platform_device *pdev) +{ + struct atmel_hlcdc_pwm *chip = platform_get_drvdata(pdev); + int ret; + + ret = pwmchip_remove(&chip->chip); + if (ret) + return ret; + + clk_disable_unprepare(chip->hlcdc->periph_clk); + + return 0; +} + +static const struct of_device_id atmel_hlcdc_pwm_dt_ids[] = { + { .compatible = "atmel,hlcdc-pwm" }, + { /* sentinel */ }, +}; + +static struct platform_driver atmel_hlcdc_pwm_driver = { + .driver = { + .name = "atmel-hlcdc-pwm", + .of_match_table = atmel_hlcdc_pwm_dt_ids, + }, + .probe = atmel_hlcdc_pwm_probe, + .remove = atmel_hlcdc_pwm_remove, +}; +module_platform_driver(atmel_hlcdc_pwm_driver); + +MODULE_ALIAS("platform:atmel-hlcdc-pwm"); +MODULE_AUTHOR("Boris Brezillon <boris.brezillon@free-electrons.com>"); +MODULE_DESCRIPTION("Atmel HLCDC PWM driver"); +MODULE_LICENSE("GPL v2"); |