Bluetooth: btqca: Add support to read FW build version for WCN3991 BTSoC

Add support to read FW build version from debugfs node.
This info can be read from
/sys/kernel/debug/bluetooth/hci0/firmware_info

Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

1 files changed, 54 insertions, 0 deletions

diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index f85a55add9be..f6256a3b84cf 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -94,6 +94,53 @@ out:
 }
 EXPORT_SYMBOL_GPL(qca_read_soc_version);
 
+static int qca_read_fw_build_info(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+	struct edl_event_hdr *edl;
+	char cmd, build_label[QCA_FW_BUILD_VER_LEN];
+	int build_lbl_len, err = 0;
+
+	bt_dev_dbg(hdev, "QCA read fw build info");
+
+	cmd = EDL_GET_BUILD_INFO_CMD;
+	skb = __hci_cmd_sync_ev(hdev, EDL_PATCH_CMD_OPCODE, EDL_PATCH_CMD_LEN,
+				&cmd, 0, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		err = PTR_ERR(skb);
+		bt_dev_err(hdev, "Reading QCA fw build info failed (%d)",
+			   err);
+		return err;
+	}
+
+	edl = (struct edl_event_hdr *)(skb->data);
+	if (!edl) {
+		bt_dev_err(hdev, "QCA read fw build info with no header");
+		err = -EILSEQ;
+		goto out;
+	}
+
+	if (edl->cresp != EDL_CMD_REQ_RES_EVT ||
+	    edl->rtype != EDL_GET_BUILD_INFO_CMD) {
+		bt_dev_err(hdev, "QCA Wrong packet received %d %d", edl->cresp,
+			   edl->rtype);
+		err = -EIO;
+		goto out;
+	}
+
+	build_lbl_len = edl->data[0];
+	if (build_lbl_len <= QCA_FW_BUILD_VER_LEN - 1) {
+		memcpy(build_label, edl->data + 1, build_lbl_len);
+		*(build_label + build_lbl_len) = '\0';
+	}
+
+	hci_set_fw_info(hdev, "%s", build_label);
+
+out:
+	kfree_skb(skb);
+	return err;
+}
+
 static int qca_send_reset(struct hci_dev *hdev)
 {
 	struct sk_buff *skb;
@@ -524,6 +571,13 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 		return err;
 	}
 
+	if (soc_type == QCA_WCN3991) {
+		/* get fw build info */
+		err = qca_read_fw_build_info(hdev);
+		if (err < 0)
+			return err;
+	}
+
 	bt_dev_info(hdev, "QCA setup on UART is completed");
 
 	return 0;