From 63d152149b2d0860ccf8c4e6596b6175b2b7ace6 Mon Sep 17 00:00:00 2001 From: Lorenzo Colitti Date: Thu, 14 Jan 2021 08:42:22 +0900 Subject: usb: gadget: u_ether: support configuring interface names. This patch allows the administrator to configure the interface name of a function using u_ether (e.g., eem, ncm, rndis). Currently, all such interfaces, regardless of function type, are always called usb0, usb1, etc. This makes it very cumbersome to use more than one such type at a time, because userspace cannnot easily tell the interfaces apart and apply the right configuration to each one. Interface renaming in userspace based on driver doesn't help, because the interfaces all have the same driver. Without this patch, doing this require hacks/workarounds such as setting fixed MAC addresses on the functions, and then renaming by MAC address, or scraping configfs after each interface is created to find out what it is. Setting the interface name is done by writing to the same "ifname" configfs attribute that reports the interface name after the function is bound. The write must contain an interface pattern such as "usb%d" (which will cause the net core to pick the next available interface name starting with "usb"). This patch does not allow writing an exact interface name (as opposed to a pattern) because if the interface already exists at bind time, the bind will fail and the whole gadget will fail to activate. This could be allowed in a future patch. For compatibility with current userspace, when reading an ifname that has not currently been set, the result is still "(unnamed net_device)". Once a write to ifname happens, then reading ifname will return whatever was last written. Tested by configuring an rndis function and an ncm function on the same gadget, and writing "rndis%d" to ifname on the rndis function and "ncm%d" to ifname on the ncm function. When the gadget was bound, the rndis interface was rndis0 and the ncm interface was ncm0. Signed-off-by: Lorenzo Colitti Link: https://lore.kernel.org/r/20210113234222.3272933-1-lorenzo@google.com Signed-off-by: Greg Kroah-Hartman --- Documentation/usb/gadget-testing.rst | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-) (limited to 'Documentation/usb') diff --git a/Documentation/usb/gadget-testing.rst b/Documentation/usb/gadget-testing.rst index 2eeb3e9299e4..2085e7b24eeb 100644 --- a/Documentation/usb/gadget-testing.rst +++ b/Documentation/usb/gadget-testing.rst @@ -91,9 +91,9 @@ The ECM function provides these attributes in its function directory: and after creating the functions/ecm. they contain default values: qmult is 5, dev_addr and host_addr are randomly selected. -Except for ifname they can be written to until the function is linked to a -configuration. The ifname is read-only and contains the name of the interface -which was assigned by the net core, e. g. usb0. +The ifname can be written to if the function is not bound. A write must be an +interface pattern such as "usb%d", which will cause the net core to choose the +next free usbX interface. By default, it is set to "usb%d". Testing the ECM function ------------------------ @@ -131,9 +131,9 @@ The ECM subset function provides these attributes in its function directory: and after creating the functions/ecm. they contain default values: qmult is 5, dev_addr and host_addr are randomly selected. -Except for ifname they can be written to until the function is linked to a -configuration. The ifname is read-only and contains the name of the interface -which was assigned by the net core, e. g. usb0. +The ifname can be written to if the function is not bound. A write must be an +interface pattern such as "usb%d", which will cause the net core to choose the +next free usbX interface. By default, it is set to "usb%d". Testing the ECM subset function ------------------------------- @@ -171,9 +171,9 @@ The EEM function provides these attributes in its function directory: and after creating the functions/eem. they contain default values: qmult is 5, dev_addr and host_addr are randomly selected. -Except for ifname they can be written to until the function is linked to a -configuration. The ifname is read-only and contains the name of the interface -which was assigned by the net core, e. g. usb0. +The ifname can be written to if the function is not bound. A write must be an +interface pattern such as "usb%d", which will cause the net core to choose the +next free usbX interface. By default, it is set to "usb%d". Testing the EEM function ------------------------ @@ -453,9 +453,9 @@ The NCM function provides these attributes in its function directory: and after creating the functions/ncm. they contain default values: qmult is 5, dev_addr and host_addr are randomly selected. -Except for ifname they can be written to until the function is linked to a -configuration. The ifname is read-only and contains the name of the interface -which was assigned by the net core, e. g. usb0. +The ifname can be written to if the function is not bound. A write must be an +interface pattern such as "usb%d", which will cause the net core to choose the +next free usbX interface. By default, it is set to "usb%d". Testing the NCM function ------------------------ @@ -591,9 +591,9 @@ The RNDIS function provides these attributes in its function directory: and after creating the functions/rndis. they contain default values: qmult is 5, dev_addr and host_addr are randomly selected. -Except for ifname they can be written to until the function is linked to a -configuration. The ifname is read-only and contains the name of the interface -which was assigned by the net core, e. g. usb0. +The ifname can be written to if the function is not bound. A write must be an +interface pattern such as "usb%d", which will cause the net core to choose the +next free usbX interface. By default, it is set to "usb%d". Testing the RNDIS function -------------------------- -- cgit v1.2.3