Age | Commit message (Collapse) | Author | Files | Lines |
|
[ Upstream commit bf585ccee22faf469d82727cf375868105b362f7 ]
struct spi_master has been renamed to struct spi_controller. Update the
reference in spi.rst to make it clickable again.
Fixes: 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20221101173252.1069294-1-j.neuschaefer@gmx.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are a number of small tty and serial driver fixes for 6.1-rc6.
They all resolve reported problems:
- kernel doc build problems with the -rc1 serial driver documentation
update
- n_gsm reported problems
- imx serial driver missing callback
- lots of tiny 8250 driver fixes for reported issues.
All of these have been in linux-next for over a week with no reported
problems"
* tag 'tty-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
docs/driver-api/miscellaneous: Remove kernel-doc of serial_core.c
serial: 8250: Flush DMA Rx on RLSI
serial: 8250_lpss: Use 16B DMA burst with Elkhart Lake
serial: 8250_lpss: Configure DMA also w/o DMA filter
serial: 8250: Fall back to non-DMA Rx if IIR_RDI occurs
tty: n_gsm: fix sleep-in-atomic-context bug in gsm_control_send
Revert "tty: n_gsm: replace kicktimer with delayed_work"
Revert "tty: n_gsm: avoid call of sleeping functions from atomic context"
serial: imx: Add missing .thaw_noirq hook
tty: serial: fsl_lpuart: don't break the on-going transfer when global reset
serial: 8250: omap: Flush PM QOS work on remove
serial: 8250: omap: Fix unpaired pm_runtime_put_sync() in omap8250_remove()
serial: 8250_omap: remove wait loop from Errata i202 workaround
serial: 8250: omap: Fix missing PM runtime calls for omap8250_set_mctrl()
serial: 8250: 8250_omap: Avoid RS485 RTS glitch on ->set_termios()
|
|
Since merge of tty-6.0-rc1, "make htmldocs" with Sphinx >=3.1 emits
a bunch of warnings indicating duplicate kernel-doc comments from
drivers/tty/serial/serial_core.c.
This is due to the kernel-doc directive for serial_core.c in
serial/drivers.rst added in the merge. It conflicts with an existing
kernel-doc directive in miscellaneous.rst.
Remove the latter directive and resolve the duplicates.
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Fixes: 607ca0f742b7 ("Merge tag 'tty-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty")
Cc: stable@vger.kernel.org # 6.0
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/4e54c76a-138a-07e0-985a-dd83cb622208@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add missing devm_i2c_add_adapter() to devres.rst. It's introduced by
commit 07740c92ae57 ("i2c: core: add managed function for adding i2c
adapters").
Fixes: 07740c92ae57 ("i2c: core: add managed function for adding i2c adapters")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- Fix older Clang vs recent overflow KUnit test additions (Nick
Desaulniers, Kees Cook)
- Fix kern-doc visibility for overflow helpers (Kees Cook)
* tag 'hardening-v6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
overflow: Refactor test skips for Clang-specific issues
overflow: disable failing tests for older clang versions
overflow: Fix kern-doc markup for functions
|
|
Fix the kern-doc markings for several of the overflow helpers and move
their location into the core kernel API documentation, where it belongs
(it's not driver-specific).
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: linux-hardening@vger.kernel.org
Reviewed-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull missed media updates from Mauro Carvalho Chehab:
"It seems I screwed-up my previous pull request: it ends up that only
half of the media patches that were in linux-next got merged in -rc1.
The script which creates the signed tags silently failed due to
5.19->6.0 so it ended generating a tag with incomplete stuff.
So here are the missing parts:
- a DVB core security fix
- lots of fixes and cleanups for atomisp staging driver
- old drivers that are VB1 are being moved to staging to be
deprecated
- several driver updates - mostly for embedded systems, but there are
also some things addressing issues with some PC webcams, in the UVC
video driver"
* tag 'media/v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (163 commits)
media: sun6i-csi: Move csi buffer definition to main header file
media: sun6i-csi: Introduce and use video helper functions
media: sun6i-csi: Add media ops with link notify callback
media: sun6i-csi: Remove controls handler from the driver
media: sun6i-csi: Register the media device after creation
media: sun6i-csi: Pass and store csi device directly in video code
media: sun6i-csi: Tidy up video code
media: sun6i-csi: Tidy up v4l2 code
media: sun6i-csi: Tidy up Kconfig
media: sun6i-csi: Use runtime pm for clocks and reset
media: sun6i-csi: Define and use variant to get module clock rate
media: sun6i-csi: Always set exclusive module clock rate
media: sun6i-csi: Tidy up platform code
media: sun6i-csi: Refactor main driver data structures
media: sun6i-csi: Define and use driver name and (reworked) description
media: cedrus: Add a Kconfig dependency on RESET_CONTROLLER
media: sun8i-rotate: Add a Kconfig dependency on RESET_CONTROLLER
media: sun8i-di: Add a Kconfig dependency on RESET_CONTROLLER
media: sun4i-csi: Add a Kconfig dependency on RESET_CONTROLLER
media: sun6i-csi: Add a Kconfig dependency on RESET_CONTROLLER
...
|
|
Pull VFIO updates from Alex Williamson:
- Prune private items from vfio_pci_core.h to a new internal header,
fix missed function rename, and refactor vfio-pci interrupt defines
(Jason Gunthorpe)
- Create consistent naming and handling of ioctls with a function per
ioctl for vfio-pci and vfio group handling, use proper type args
where available (Jason Gunthorpe)
- Implement a set of low power device feature ioctls allowing userspace
to make use of power states such as D3cold where supported (Abhishek
Sahu)
- Remove device counter on vfio groups, which had restricted the page
pinning interface to singleton groups to account for limitations in
the type1 IOMMU backend. Document usage as limited to emulated IOMMU
devices, ie. traditional mdev devices where this restriction is
consistent (Jason Gunthorpe)
- Correct function prefix in hisi_acc driver incurred during previous
refactoring (Shameer Kolothum)
- Correct typo and remove redundant warning triggers in vfio-fsl driver
(Christophe JAILLET)
- Introduce device level DMA dirty tracking uAPI and implementation in
the mlx5 variant driver (Yishai Hadas & Joao Martins)
- Move much of the vfio_device life cycle management into vfio core,
simplifying and avoiding duplication across drivers. This also
facilitates adding a struct device to vfio_device which begins the
introduction of device rather than group level user support and fills
a gap allowing userspace identify devices as vfio capable without
implicit knowledge of the driver (Kevin Tian & Yi Liu)
- Split vfio container handling to a separate file, creating a more
well defined API between the core and container code, masking IOMMU
backend implementation from the core, allowing for an easier future
transition to an iommufd based implementation of the same (Jason
Gunthorpe)
- Attempt to resolve race accessing the iommu_group for a device
between vfio releasing DMA ownership and removal of the device from
the IOMMU driver. Follow-up with support to allow vfio_group to exist
with NULL iommu_group pointer to support existing userspace use cases
of holding the group file open (Jason Gunthorpe)
- Fix error code and hi/lo register manipulation issues in the hisi_acc
variant driver, along with various code cleanups (Longfang Liu)
- Fix a prior regression in GVT-g group teardown, resulting in
unreleased resources (Jason Gunthorpe)
- A significant cleanup and simplification of the mdev interface,
consolidating much of the open coded per driver sysfs interface
support into the mdev core (Christoph Hellwig)
- Simplification of tracking and locking around vfio_groups that fall
out from previous refactoring (Jason Gunthorpe)
- Replace trivial open coded f_ops tests with new helper (Alex
Williamson)
* tag 'vfio-v6.1-rc1' of https://github.com/awilliam/linux-vfio: (77 commits)
vfio: More vfio_file_is_group() use cases
vfio: Make the group FD disassociate from the iommu_group
vfio: Hold a reference to the iommu_group in kvm for SPAPR
vfio: Add vfio_file_is_group()
vfio: Change vfio_group->group_rwsem to a mutex
vfio: Remove the vfio_group->users and users_comp
vfio/mdev: add mdev available instance checking to the core
vfio/mdev: consolidate all the description sysfs into the core code
vfio/mdev: consolidate all the available_instance sysfs into the core code
vfio/mdev: consolidate all the name sysfs into the core code
vfio/mdev: consolidate all the device_api sysfs into the core code
vfio/mdev: remove mtype_get_parent_dev
vfio/mdev: remove mdev_parent_dev
vfio/mdev: unexport mdev_bus_type
vfio/mdev: remove mdev_from_dev
vfio/mdev: simplify mdev_type handling
vfio/mdev: embedd struct mdev_parent in the parent data structure
vfio/mdev: make mdev.h standalone includable
drm/i915/gvt: simplify vgpu configuration management
drm/i915/gvt: fix a memory leak in intel_gvt_init_vgpu_types
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core and debug printk changes for
6.1-rc1. Included in here is:
- dynamic debug updates for the core and the drm subsystem. The drm
changes have all been acked by the relevant maintainers
- kernfs fixes for syzbot reported problems
- kernfs refactors and updates for cgroup requirements
- magic number cleanups and removals from the kernel tree (they were
not being used and they really did not actually do anything)
- other tiny cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (74 commits)
docs: filesystems: sysfs: Make text and code for ->show() consistent
Documentation: NBD_REQUEST_MAGIC isn't a magic number
a.out: restore CMAGIC
device property: Add const qualifier to device_get_match_data() parameter
drm_print: add _ddebug descriptor to drm_*dbg prototypes
drm_print: prefer bare printk KERN_DEBUG on generic fn
drm_print: optimize drm_debug_enabled for jump-label
drm-print: add drm_dbg_driver to improve namespace symmetry
drm-print.h: include dyndbg header
drm_print: wrap drm_*_dbg in dyndbg descriptor factory macro
drm_print: interpose drm_*dbg with forwarding macros
drm: POC drm on dyndbg - use in core, 2 helpers, 3 drivers.
drm_print: condense enum drm_debug_category
debugfs: use DEFINE_SHOW_ATTRIBUTE to define debugfs_regset32_fops
driver core: use IS_ERR_OR_NULL() helper in device_create_groups_vargs()
Documentation: ENI155_MAGIC isn't a magic number
Documentation: NBD_REPLY_MAGIC isn't a magic number
nbd: remove define-only NBD_MAGIC, previously magic number
Documentation: FW_HEADER_MAGIC isn't a magic number
Documentation: EEPROM_MAGIC_VALUE isn't a magic number
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- New driver for Mediatek MDP V3
- New driver for NXP i.MX DW100 dewarper
- Zoran driver got promoted from staging
- Hantro and related drivers got promoted from staging
- Several VB1 drivers got moved to staging/deprecated (cpia2, fsl-viu,
meye, saa7146, av7110, stkwebcam, tm6000, vpfe_capture, davinci,
zr364xx)
- Usual set of driver fixes, improvements and cleanups
* tag 'media/v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (107 commits)
media: destage Hantro VPU driver
media: platform: mtk-mdp3: add MediaTek MDP3 driver
media: dt-binding: mediatek: add bindings for MediaTek CCORR and WDMA
media: dt-binding: mediatek: add bindings for MediaTek MDP3 components
media: xilinx: vipp: Fix refcount leak in xvip_graph_dma_init
media: xilinx: video: Add 1X12 greyscale format
media: xilinx: csi2rxss: Add 1X12 greyscale format
media: staging: media: imx: imx7-media-csi: Increase video mem limit
media: uvcvideo: Limit power line control for Sonix Technology
media: uvcvideo: Use entity get_cur in uvc_ctrl_set
media: uvcvideo: Fix typo 'the the' in comment
media: uvcvideo: Use indexed loops in uvc_ctrl_init_ctrl()
media: uvcvideo: Fix memory leak in uvc_gpio_parse
media: renesas: vsp1: Add support for RZ/G2L VSPD
media: renesas: vsp1: Add VSP1_HAS_NON_ZERO_LBA feature bit
media: renesas: vsp1: Add support for VSP software version
media: renesas: vsp1: Add support to deassert/assert reset line
media: dt-bindings: media: renesas,vsp1: Document RZ/G2L VSPD bindings
media: meson: vdec: add missing clk_disable_unprepare on error in vdec_hevc_start()
media: amphion: fix a bug that vpu core may not resume after suspend
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"The core work this time around has mostly been around the code to
manage regulator modes, simplifying the interface for configuring
modes to not take account of the voltage and as a side effect
resolving a bootstrapping issue on systems where we can't read the
voltage from the regulator.
Otherwise it's been quite a quiet release with some new drivers and a
devm helper:
- Make the load handling in the Qualcomm RPMH regulators much more
idiomatic and general cleanups to the handling of load
configuration
- devm helper for a combined get and enable operation
- Support for MediaTek MT6331, Qualcomm PM660, 660L and PM6125, Texas
Instruments TPS65219"
* tag 'regulator-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (45 commits)
dt-bindings: gpio-regulator: add vin-supply property support
regulator: gpio: Add input_supply support in gpio_regulator_config
regulator: tps65219: Fix is_enabled checking in tps65219_set_bypass
regulator: qcom,rpmh: add pm660 and pm660l pmics
regulator: qcom-rpmh: add pm660 and pm660l pmics
regulator: of: Fix kernel-doc
regulator: of: Fix kernel-doc
regulator: Add driver for MT6332 PMIC regulators
regulator: Add bindings for MT6332 regulator
regulator: Add driver for MT6331 PMIC regulators
regulator: Add bindings for MT6331 regulator
regulator: tps65219: Fix .bypass_val_on setting
regulator: qcom_rpm: Fix circular deferral regression
regulator: core: Prevent integer underflow
regulator: dt-bindings: qcom,rpmh: Indicate regulator-allow-set-load dependencies
regulator: bd9576: switch to using devm_fwnode_gpiod_get()
regulator: bd71815: switch to using devm_fwnode_gpiod_get()
regulator: core: Fix regulator supply registration with sysfs
regulator: tps65219: change tps65219_regulator_irq_types to static
regulator: core: Don't err if allow-set-load but no allowed-modes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Driver for MAX31760 fan speed controller
- Driver for TEXAS TPS546D24 Buck Converter
- Driver for EMC2301/2/3/5 RPM-based PWM Fan Speed Controller
Removed drivers:
- Drop obsolete asus_wmi_ec_sensors driver
Cleanups, affecting various drivers:
- Use DEFINE_SIMPLE_DEV_PM_OPS where appropriate
- Remove forward declarations
- Move from strlcpy with unused retval to strscpy
- Make use of devm_clk_get_enabled()
- Drop devm_of_pwm_get()
Other notable cleanup and improvements:
- Support for additional USB devide ID and support for reporting of
rail mode via debugfs added to corsair-psu driver
- Support for aditional USB ID in nzxt-smart2 driver
- Support for Aquacomputer High Flow Next in aquacomputer_d5next
driver
- Major cleanup of pwm-fan driver
- Major cleanup of mr75203 driver, and added support for new device
revision
And various other minor fixes and cleanups"
* tag 'hwmon-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (86 commits)
hwmon: (corsair-psu) add USB id of new revision of the HX1000i psu
hwmon: (pmbus/mp2888) Fix sensors readouts for MPS Multi-phase mp2888 controller
dt-bindings: hwmon: sensirion,shtc1: Clean up spelling mistakes and grammar
hwmon: (nct6683) remove unused variable in nct6683_create_attr_group
hwmon: w83627hf: Reorder symbols to get rid of a few forward declarations
hwmon: (ina3221) Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
hwmon: (w83627ehf) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (tmp108) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (tmp103) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (tmp102) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (pwm-fan) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (nct6775) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (max6639) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (max31730) witch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (max31722) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (ltc2947) Switch to EXPORT_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (lm90) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (it87) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (gpio-fan) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (adt7x10) Switch to EXPORT_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
...
|
|
Every driver just emits a string, simply add a method to the mdev_driver
to return it and provide a standard sysfs show function.
Remove the now unused types_attrs field in struct mdev_driver and the
support code for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Link: https://lore.kernel.org/r/20220923092652.100656-14-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Every driver just print a number, simply add a method to the mdev_driver
to return it and provide a standard sysfs show function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20220923092652.100656-13-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Every driver just emits a static string, simply add a field to the
mdev_type for the driver to fill out or fall back to the sysfs name and
provide a standard sysfs show function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20220923092652.100656-12-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Every driver just emits a static string, simply feed it through the ops
and provide a standard sysfs show function.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20220923092652.100656-11-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Just open code the dereferences in the only user.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Link: https://lore.kernel.org/r/20220923092652.100656-9-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Instead of abusing struct attribute_group to control initialization of
struct mdev_type, just define the actual attributes in the mdev_driver,
allocate the mdev_type structures in the caller and pass them to
mdev_register_parent.
This allows the caller to use container_of to get at the containing
structure and thus significantly simplify the code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20220923092652.100656-6-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Simplify mdev_{un}register_device by requiring the caller to pass in
a structure allocate as part of the parent device structure. This
removes the need for a list of parents and the separate mdev_parent
refcount as we can simplify rely on the reference to the parent device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20220923092652.100656-5-hch@lst.de
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Add missing devm_request_free_mem_region() to devres.rst.
It's introduced by commit 0092908d16c6 ("mm: factor out a
devm_request_free_mem_region helper").
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220927080215.1359979-1-yangyingliang@huawei.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
devm_irq_sim_init() has been changed to devm_irq_domain_create_sim()
in commit 337cbeb2c13e ("genirq/irq_sim: Simplify the API").
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220927083819.12484-1-yangyingliang@huawei.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Add devm_spi_alloc_master() and devm_spi_alloc_slave() to devres.rst.
They are introduced by
commit 5e844cc37a5c ("spi: Introduce device-managed SPI controller allocation").
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/r/20220923141803.75734-1-yangyingliang@huawei.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Add devm_pinctrl_get_select() and devm_pinctrl_register_and_init() to
devres.rst.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220922153737.2863951-1-yangyingliang@huawei.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
I have removed repeated `the` inside the documentation
Signed-off-by: Akhil Raj <lf32.dev@gmail.com>
Link: https://lore.kernel.org/r/20220827145359.32599-1-lf32.dev@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
[Note: the code is mostly from Laurent but the patch description is from Tomi]
The media_pipeline_start() and media_pipeline_stop() functions use the
media graph walk API to traverse the graph and validate the pipeline.
The graph walk traverses the media graph following links between the
entities.
Also, while the pipeline can't change between the start and stop calls,
the graph is walked again from scratch at stop time, or any time a
driver needs to inspect the pipeline.
With the upcoming multiplexed streams support we will need a bit more
intelligent pipeline construction, as e.g. two independent streams may
be passing through a single entity via separate pads in which case
those pads should not be part of the same pipeline.
This patch essentially rewrites the media_pipeline_start/stop so that
a pipeline is defined as a set of pads instead of entities and the media
graph traversal considers the pad interdependencies when choosing which
links to follow.
Currently all the entity's pads are considered as interdependent. This
means that the behavior with all the current drivers stays the same, but
in the future we can define a more fine-grained pipeline construction.
Additionally the media pipeline's pads are cached at
media_pipeline_start() time, and re-used at media_pipeline_stop() which
avoid the need to re-walk the whole graph as the previous implementation
did.
Also, caching pads in the pipeline can serve in the future as the
foundation to provide a better API than the media graph walk to drivers
to iterate over pads and entities in the pipeline.
Note that the old media_pipeline_start/stop used the media graph walk
API. The new version does not use the media graph walk API, but instead
a new implementation.
There are two reasons for not changing the graph walk: it proved to be
rather difficult to change the graph walk to have the features
implemented in this patch, and second, this keeps the backward
compatibility of the graph walk as there are users of the graph walk API
The long term plan is that all the existing code would be converted to
use the new cached pipeline, thus allowing us to remove the graph walk.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The doc talks about streams and pipelines, but doesn't really define
them. This is an attempt to define them according to my understanding.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The devm_of_pwm_get() has recently lost its single user, drop
the dead API as well.
Note, the new code should use either plain pwm_get() or managed
devm_pwm_get() or devm_fwnode_pwm_get() APIs.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220826172642.16404-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
devm_ioremap_np has never been used anywhere since it was added in early
2021, so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220822061424.151819-1-hch@lst.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The term 'videobuf' typically refers to the old videobuf version 1
framework. Avoid using this word in drivers that are converted to
vb2.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add the new devm_regulator_get_enable() and
devm_regulator_get_enable_optional() to devres.rst
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/55efb5a23822b8e1558d560a6ad906eadbc39a17.1660934107.git.mazziesaccount@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
A few managed regulator functions were missing from the API list.
Add missing functions.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/5efc0c90342b0a0ef3322b8fc1472b84cfc0eb45.1660292316.git.mazziesaccount@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pull cxl updates from Dan Williams:
"Compute Express Link (CXL) updates for 6.0:
- Introduce a 'struct cxl_region' object with support for
provisioning and assembling persistent memory regions.
- Introduce alloc_free_mem_region() to accompany the existing
request_free_mem_region() as a method to allocate physical memory
capacity out of an existing resource.
- Export insert_resource_expand_to_fit() for the CXL subsystem to
late-publish CXL platform windows in iomem_resource.
- Add a polled mode PCI DOE (Data Object Exchange) driver service and
use it in cxl_pci to retrieve the CDAT (Coherent Device Attribute
Table)"
* tag 'cxl-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (74 commits)
cxl/hdm: Fix skip allocations vs multiple pmem allocations
cxl/region: Disallow region granularity != window granularity
cxl/region: Fix x1 interleave to greater than x1 interleave routing
cxl/region: Move HPA setup to cxl_region_attach()
cxl/region: Fix decoder interleave programming
Documentation: cxl: remove dangling kernel-doc reference
cxl/region: describe targets and nr_targets members of cxl_region_params
cxl/regions: add padding for cxl_rr_ep_add nested lists
cxl/region: Fix IS_ERR() vs NULL check
cxl/region: Fix region reference target accounting
cxl/region: Fix region commit uninitialized variable warning
cxl/region: Fix port setup uninitialized variable warnings
cxl/region: Stop initializing interleave granularity
cxl/hdm: Fix DPA reservation vs cxl_endpoint_decoder lifetime
cxl/acpi: Minimize granularity for x1 interleaves
cxl/region: Delete 'region' attribute from root decoders
cxl/acpi: Autoload driver for 'cxl_acpi' test devices
cxl/region: decrement ->nr_targets on error in cxl_region_attach()
cxl/region: prevent underflow in ways_to_cxl()
cxl/region: uninitialized variable in alloc_hpa()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the big set of tty and serial driver changes for 6.0-rc1.
It was delayed from last week as I wanted to make sure the last commit
here got some good testing in linux-next and elsewhere as it seemed to
show up only late in testing for some reason.
Nothing major here, just lots of cleanups from Jiri and Ilpo to make
the tty core cleaner (Jiri) and the rs485 code simpler to use (Ilpo).
Also included in here is the obligatory n_gsm updates from Daniel
Starke and lots of tiny driver updates and minor fixes and tweaks for
other smaller serial drivers.
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (186 commits)
tty: serial: qcom-geni-serial: Fix %lu -> %u in print statements
tty: amiserial: Fix comment typo
tty: serial: document uart_get_console()
tty: serial: serial_core, reformat kernel-doc for functions
Documentation: serial: link uart_ops properly
Documentation: serial: move GPIO kernel-doc to the functions
Documentation: serial: dedup kernel-doc for uart functions
Documentation: serial: move uart_ops documentation to the struct
dt-bindings: serial: snps-dw-apb-uart: Document Rockchip RV1126
serial: mvebu-uart: uart2 error bits clearing
tty: serial: fsl_lpuart: correct the count of break characters
serial: stm32: make info structs static to avoid sparse warnings
serial: fsl_lpuart: zero out parity bit in CS7 mode
tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.
serial: 8250_bcm2835aux: Add missing clk_disable_unprepare()
tty: vt: initialize unicode screen buffer
serial: remove VR41XX serial driver
serial: 8250: lpc18xx: Remove redundant sanity check for RS485 flags
serial: 8250_dwlib: remove redundant sanity check for RS485 flags
dt_bindings: rs485: Correct delay values
...
|
|
Pull VFIO updates from Alex Williamson:
- Cleanup use of extern in function prototypes (Alex Williamson)
- Simplify bus_type usage and convert to device IOMMU interfaces (Robin
Murphy)
- Check missed return value and fix comment typos (Bo Liu)
- Split migration ops from device ops and fix races in mlx5 migration
support (Yishai Hadas)
- Fix missed return value check in noiommu support (Liam Ni)
- Hardening to clear buffer pointer to avoid use-after-free (Schspa
Shi)
- Remove requirement that only the same mm can unmap a previously
mapped range (Li Zhe)
- Adjust semaphore release vs device open counter (Yi Liu)
- Remove unused arg from SPAPR support code (Deming Wang)
- Rework vfio-ccw driver to better fit new mdev framework (Eric Farman,
Michael Kawano)
- Replace DMA unmap notifier with callbacks (Jason Gunthorpe)
- Clarify SPAPR support comment relative to iommu_ops (Alexey
Kardashevskiy)
- Revise page pinning API towards compatibility with future iommufd
support (Nicolin Chen)
- Resolve issues in vfio-ccw, including use of DMA unmap callback (Eric
Farman)
* tag 'vfio-v6.0-rc1' of https://github.com/awilliam/linux-vfio: (40 commits)
vfio/pci: fix the wrong word
vfio/ccw: Check return code from subchannel quiesce
vfio/ccw: Remove FSM Close from remove handlers
vfio/ccw: Add length to DMA_UNMAP checks
vfio: Replace phys_pfn with pages for vfio_pin_pages()
vfio/ccw: Add kmap_local_page() for memcpy
vfio: Rename user_iova of vfio_dma_rw()
vfio/ccw: Change pa_pfn list to pa_iova list
vfio/ap: Change saved_pfn to saved_iova
vfio: Pass in starting IOVA to vfio_pin/unpin_pages API
vfio/ccw: Only pass in contiguous pages
vfio/ap: Pass in physical address of ind to ap_aqic()
drm/i915/gvt: Replace roundup with DIV_ROUND_UP
vfio: Make vfio_unpin_pages() return void
vfio/spapr_tce: Fix the comment
vfio: Replace the iommu notifier with a device list
vfio: Replace the DMA unmapping notifier with a callback
vfio/ccw: Move FSM open/close to MDEV open/close
vfio/ccw: Refactor vfio_ccw_mdev_reset
vfio/ccw: Create a CLOSE FSM event
...
|
|
Sphinx reported kernel-doc failure warning, pointing to non-existent
drivers/cxl/region.h (which doesn't also exist throughout repo history):
WARNING: kernel-doc './scripts/kernel-doc -rst -enable-lineno -sphinx-version 2.4.4 -no-doc-sections ./drivers/cxl/region.h' failed with return code 1
Above cause error message to be displayed on htmldocs output.
Delete the reference.
Fixes: 779dd20cfb56c5 ("cxl/region: Add region creation support")
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20220804075448.98241-4-bagasdotme@gmail.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New support / Core:
- Remove DMA_MEMCPY_SG for lack of users
- Tegra 234 dmaengine support
- Mediatek MT8365 dma support
- Apple ADMAC driver
Updates:
- Yaml conversion for ST-Ericsson DMA40 binding and Freescale edma
- rz-dmac updates and device_synchronize support
- Bunch of typo in comments fixes in drivers
- multithread support in sf-pdma driver"
* tag 'dmaengine-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (50 commits)
dmaengine: mediatek: mtk-hsdma: Fix typo 'the the' in comment
dmaengine: axi-dmac: check cache coherency register
dmaengine: sh: rz-dmac: Add device_synchronize callback
dmaengine: sprd: Cleanup in .remove() after pm_runtime_get_sync() failed
dmaengine: tegra: Add terminate() for Tegra234
dt-bindings: dmaengine: Add compatible for Tegra234
dmaengine: xilinx: use strscpy to replace strlcpy
dmaengine: imx-sdma: Add FIFO stride support for multi FIFO script
dmaengine: idxd: Correct IAX operation code names
dmaengine: imx-dma: Cast of_device_get_match_data() with (uintptr_t)
dmaengine: dw-axi-dmac: ignore interrupt if no descriptor
dmaengine: dw-axi-dmac: do not print NULL LLI during error
dmaengine: altera-msgdma: Fixed some inconsistent function name descriptions
dmaengine: imx-sdma: Add missing struct documentation
dmaengine: sf-pdma: Add multithread support for a DMA channel
dt-bindings: dma: dw-axi-dmac: extend the number of interrupts
dmaengine: dmatest: use strscpy to replace strlcpy
dmaengine: ste_dma40: fix typo in comment
dmaengine: jz4780: fix typo in comment
dmaengine: s3c24xx: fix typo in comment
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"Here are the updates for this merge window from the GPIO subsystem.
We have more lines removed than added thanks to dropping of a driver
for a platform that's no longer supported. Otherwise the changes are
pretty straightforward: support for some new models, various
improvements to existing drivers, some tweaks to the core library code
and DT bindings updates.
Summary:
- remove gpio-vr41xx driver as the only platform using it got dropped
too
- add support for suspend/resume to gpio-davinci
- improvements to the GPIO character device code
- add support for disabling bias for in-kernel users (up until now
only user-space could set it)
- drop unused devm_gpio_free()
- fix a refcount issue in gpiolib OF
- use device match helpers where applicable
- add support for a new model to gpio-rockchip
- non-functional improvements in gpio-adp5588
- improve and simplify teardown in gpio-twl4030 and gpio-ucb1400
- modernize the gpio-74xx-mmio and gpio-adnp drivers
- coding style improvements in gpio-xilinx, gpio-104-idi-48
- support new model (pca9571) in gpio-pca9570
- convert the DT bindings to YAML for gpio-mvebu and update the
document
- don't return error codes from remove() in gpio-brcmstb
- add a library for the intel 8255 PPI interface and use it in
drivers
- reduce using magic numbers and improve code readability in several
drivers
- convert DT bindings to YAML for gpio-tpic2810
- add new models to DT bindings for gpio-frl-imx
- Kconfig improvements
- other minor tweaks and improvements"
* tag 'gpio-updates-for-v6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (52 commits)
dt-bindings: gpio: fsl-imx-gpio: Add i.MXRT compatibles
gpio: 74xx-mmio: Use bits instead of plain numbers for flags
gpio: xilinx: add missing blank line after declarations
MAINTAINERS: Update Intel 8255 GPIO driver file list
gpio: gpio-mm: Implement and utilize register structures
gpio: 104-idi-48: Implement and utilize register structures
gpio: 104-dio-48e: Implement and utilize register structures
gpio: i8255: Introduce the Intel 8255 interface library module
gpio: 104-idio-16: Implement and utilize register structures
gpio: ws16c48: Implement and utilize register structures
gpio: remove VR41XX related gpio driver
dt-bindings: gpio: add pull-disable flag
gpiolib: acpi: support bias pull disable
gpiolib: of: support bias pull disable
gpiolib: add support for bias pull disable
gpio: 74xx-mmio: use bits.h macros for all masks
gpio: 74xx-mmio: Check MMIO_74XX_DIR_IN flag in mmio_74xx_dir_in()
gpio: 74xx-mmio: Make use of device properties
gpiolib: cdev: compile out HTE unless CONFIG_HTE selected
gpiolib: cdev: consolidate edge detector configuration flags
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- Microsoft Surface:
- SSAM hot unplug support
- Surface Pro 8 keyboard cover support
- Tablet mode switch support for Surface Pro 8 and Surface Laptop
Studio
- thinkpad_acpi:
- AMD Automatice Mode Transitions (AMT) support
- Mellanox:
- Vulcan chassis COMe NVSwitch management support
- XH3000 support
- New generic/shared Intel P2SB (Primary to Sideband) support
- Lots of small cleanups
- Various small bugfixes
- Various new hardware ids / quirks additions
* tag 'platform-drivers-x86-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (105 commits)
platform/x86/intel/vsec: Fix wrong type for local status variables
platform/x86: p2sb: Move out of X86_PLATFORM_DEVICES dependency
platform/x86: pmc_atom: Fix comment typo
platform/surface: gpe: Add support for 13" Intel version of Surface Laptop 4
platform/olpc: Fix uninitialized data in debugfs write
platform/mellanox: mlxreg-lc: Fix error flow and extend verbosity
platform/x86: pmc_atom: Match all Lex BayTrail boards with critclk_systems DMI table
platform/x86: sony-laptop: Remove useless comparisons in sony_pic_read_possible_resource()
tools/power/x86/intel-speed-select: Remove unneeded semicolon
tools/power/x86/intel-speed-select: Fix off by one check
platform/surface: tabletsw: Fix __le32 integer access
Documentation/ABI: Add new attributes for mlxreg-io sysfs interfaces
Documentation/ABI: mlxreg-io: Fix contact info
platform/mellanox: mlxreg-io: Add locking for io operations
platform/x86: mlx-platform: Add COME board revision register
platform/x86: mlx-platform: Add support for new system XH3000
platform/x86: mlx-platform: Introduce support for COMe NVSwitch management module for Vulcan chassis
platform/x86: mlx-platform: Add support for systems equipped with two ASICs
platform/x86: mlx-platform: Add cosmetic changes for alignment
platform/x86: mlx-platform: Make activation of some drivers conditional
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH:
"Here is the set of SPDX comment updates for 6.0-rc1.
Nothing huge here, just a number of updated SPDX license tags and
cleanups based on the review of a number of common patterns in GPLv2
boilerplate text.
Also included in here are a few other minor updates, two USB files,
and one Documentation file update to get the SPDX lines correct.
All of these have been in the linux-next tree for a very long time"
* tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (28 commits)
Documentation: samsung-s3c24xx: Add blank line after SPDX directive
x86/crypto: Remove stray comment terminator
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_406.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_398.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_391.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_390.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_298.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_292.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_179.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 2)
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1)
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_152.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_149.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_147.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_133.RULE
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the big set of staging driver patches for 6.0-rc1.
Another round where we removed more lines of code than added, always a
nice progression. Some of that came from the movement of the vme code
back into staging, and removal of some other of the vme driver code as
there are no known users and it is very obsolete and unmaintained. It
can be added back easily if someone offers to maintain it.
Other than that this merge has lots of little things:
- huge cleanups for r8188eu driver
- minor cleanups for other wifi drivers
- tiny loop fixes for greybus code
- other small coding style fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (191 commits)
staging: r8188eu: fix potential uninitialised variable use in rtw_pwrctrl.c
staging: r8188eu: remove initializer from ret in rtw_pwr_wakeup
staging: vt6655: Convert macro vt6655_mac_clear_stck_ds to function
staging: vt6655: Rename MACvClearStckDS
staging: fbtft: core: set smem_len before fb_deferred_io_init call
staging: r8188eu: convert rtw_pwr_wakeup to correct error code semantics
staging: r8188eu: make dump_chip_info() static
staging: r8188eu: remove DoReserved prototype
staging: r8188eu: remove OnAtim prototype
staging: r8188eu: remove SetHwReg8188EU()
staging: r8188eu: make update_TSF() and correct_TSF() static
staging: r8188eu: remove unused parameter from update_TSF()
staging: r8188eu: remove unused parameter from correct_TSF()
staging: r8188eu: remove HW_VAR_SET_OPMODE from SetHwReg8188EU()
staging: pi433: remove duplicated comments
staging: qlge: refine variable name
staging: vt6655: Convert macro vt6655_mac_word_reg_bits_off to function
staging: vt6655: Convert macro vt6655_mac_reg_bits_off to function
staging: vt6655: Convert macro vt6655_mac_word_reg_bits_on to function
staging: vt6655: Convert macro vt6655_mac_reg_bits_on to function
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core / kernfs updates from Greg KH:
"Here is the set of driver core and kernfs changes for 6.0-rc1.
The "biggest" thing in here is some scalability improvements for
kernfs for large systems. Other than that, included in here are:
- arch topology and cache info changes that have been reviewed and
discussed a lot.
- potential error path cleanup fixes
- deferred driver probe cleanups
- firmware loader cleanups and tweaks
- documentation updates
- other small things
All of these have been in the linux-next tree for a while with no
reported problems"
* tag 'driver-core-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (63 commits)
docs: embargoed-hardware-issues: fix invalid AMD contact email
firmware_loader: Replace kmap() with kmap_local_page()
sysfs docs: ABI: Fix typo in comment
kobject: fix Kconfig.debug "its" grammar
kernfs: Fix typo 'the the' in comment
docs: driver-api: firmware: add driver firmware guidelines. (v3)
arch_topology: Fix cache attributes detection in the CPU hotplug path
ACPI: PPTT: Leave the table mapped for the runtime usage
cacheinfo: Use atomic allocation for percpu cache attributes
drivers/base: fix userspace break from using bin_attributes for cpumap and cpulist
MAINTAINERS: Change mentions of mpm to olivia
docs: ABI: sysfs-devices-soc: Update Lee Jones' email address
docs: ABI: sysfs-class-pwm: Update Lee Jones' email address
Documentation/process: Add embargoed HW contact for LLVM
Revert "kernfs: Change kernfs_notify_list to llist."
ACPI: Remove the unused find_acpi_cpu_cache_topology()
arch_topology: Warn that topology for nested clusters is not supported
arch_topology: Add support for parsing sockets in /cpu-map
arch_topology: Set cluster identifier in each core/thread from /cpu-map
arch_topology: Limit span of cpu_clustergroup_mask()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the large set of char and misc and other driver subsystem
changes for 6.0-rc1.
Highlights include:
- large set of IIO driver updates, additions, and cleanups
- new habanalabs device support added (loads of register maps much
like GPUs have)
- soundwire driver updates
- phy driver updates
- slimbus driver updates
- tiny virt driver fixes and updates
- misc driver fixes and updates
- interconnect driver updates
- hwtracing driver updates
- fpga driver updates
- extcon driver updates
- firmware driver updates
- counter driver update
- mhi driver fixes and updates
- binder driver fixes and updates
- speakup driver fixes
All of these have been in linux-next for a while without any reported
problems"
* tag 'char-misc-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (634 commits)
drivers: lkdtm: fix clang -Wformat warning
char: remove VR41XX related char driver
misc: Mark MICROCODE_MINOR unused
spmi: trace: fix stack-out-of-bound access in SPMI tracing functions
dt-bindings: iio: adc: Add compatible for MT8188
iio: light: isl29028: Fix the warning in isl29028_remove()
iio: accel: sca3300: Extend the trigger buffer from 16 to 32 bytes
iio: fix iio_format_avail_range() printing for none IIO_VAL_INT
iio: adc: max1027: unlock on error path in max1027_read_single_value()
iio: proximity: sx9324: add empty line in front of bullet list
iio: magnetometer: hmc5843: Remove duplicate 'the'
iio: magn: yas530: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: magnetometer: ak8974: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: veml6030: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: vcnl4035: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: vcnl4000: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: tsl2591: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
iio: light: tsl2583: Use DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
iio: light: isl29028: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
iio: light: gp2ap002: Switch to DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
...
|
|
Pull drm updates from Dave Airlie:
"Highlights:
- New driver for logicvc - which is a display IP core.
- EDID parser rework to add new extensions
- fbcon scrolling improvements
- i915 has some more DG2 work but not enabled by default, but should
have enough features for userspace to work now.
Otherwise it's lots of work all over the place. Detailed summary:
New driver:
- logicvc
vfio:
- use aperture API
core:
- of: Add data-lane helpers and convert drivers
- connector: Remove deprecated ida_simple_get()
media:
- Add various RGB666 and RGB888 format constants
panel:
- Add HannStar HSD101PWW
- Add ETML0700Y5DHA
dma-buf:
- add sync-file API
- set dma mask for udmabuf devices
fbcon:
- Improve scrolling performance
- Sanitize input
fbdev:
- device unregistering fixes
- vesa: Support COMPILE_TEST
- Disable firmware-device registration when first native driver loads
aperture:
- fix segfault during hot-unplug
- export for use with other subsystems
client:
- use driver validated modes
dp:
- aux: make probing more reliable
- mst: Read extended DPCD capabilities during system resume
- Support waiting for HDP signal
- Port-validation fixes
edid:
- CEA data-block iterators
- struct drm_edid introduction
- implement HF-EEODB extension
gem:
- don't use fb format non-existing planes
probe-helper:
- use 640x480 as displayport fallback
scheduler:
- don't kill jobs in interrupt context
bridge:
- Add support for i.MX8qxp and i.MX8qm
- lots of fixes/cleanups
- Add TI-DLPC3433
- fy07024di26a30d: Optional GPIO reset
- ldb: Add reg and reg-name properties to bindings, Kconfig fixes
- lt9611: Fix display sensing;
- tc358767: DSI/DPI refactoring and DSI-to-eDP support, DSI lane handling
- tc358775: Fix clock settings
- ti-sn65dsi83: Allow GPIO to sleep
- adv7511: I2C fixes
- anx7625: Fix error handling; DPI fixes; Implement HDP timeout via callback
- fsl-ldb: Drop DE flip
- ti-sn65dsi86: Convert to atomic modesetting
amdgpu:
- use atomic fence helpers in DM
- fix VRAM address calculations
- export CRTC bpc via debugfs
- Initial devcoredump support
- Enable high priority gfx queue on asics which support it
- Adjust GART size on newer APUs for S/G display
- Soft reset for GFX 11 / SDMA 6
- Add gfxoff status query for vangogh
- Fix timestamps for cursor only commits
- Adjust GART size on newer APUs for S/G display
- fix buddy memory corruption
amdkfd:
- MMU notifier fixes
- P2P DMA support using dma-buf
- Add available memory IOCTL
- HMM profiler support
- Simplify GPUVM validation
- Unified memory for CWSR save/restore area
i915:
- General driver clean-up
- DG2 enabling (still under force probe)
- DG2 small BAR memory support
- HuC loading support
- DG2 workarounds
- DG2/ATS-M device IDs added
- Ponte Vecchio prep work and new blitter engines
- add Meteorlake support
- Fix sparse warnings
- DMC MMIO range checks
- Audio related fixes
- Runtime PM fixes
- PSR fixes
- Media freq factor and per-gt enhancements
- DSI fixes for ICL+
- Disable DMC flip queue handlers
- ADL_P voltage swing updates
- Use more the VBT for panel information
- Fix on Type-C ports with TBT mode
- Improve fastset and allow seamless M/N changes
- Accept more fixed modes with VRR/DMRRS panels
- Disable connector polling for a headless SKU
- ADL-S display PLL w/a
- Enable THP on Icelake and beyond
- Fix i915_gem_object_ggtt_pin_ww regression on old platforms
- Expose per tile media freq factor in sysfs
- Fix dma_resv fence handling in multi-batch execbuf
- Improve on suspend / resume time with VT-d enabled
- export CRTC bpc settings via debugfs
msm:
- gpu: a619 support
- gpu: Fix for unclocked GMU register access
- gpu: Devcore dump enhancements
- client utilization via fdinfo support
- fix fence rollover issue
- gem: Lockdep false-positive warning fix
- gem: Switch to pfn mappings
- WB support on sc7180
- dp: dropped custom bulk clock implementation
- fix link retraining on resolution change
- hdmi: dropped obsolete GPIO support
tegra:
- context isolation for host1x engines
- tegra234 soc support
mediatek:
- add vdosys0/1 for mt8195
- add MT8195 dp_intf driver
exynos:
- Fix resume function issue of exynos decon driver by calling
clk_disable_unprepare() properly if clk_prepare_enable() failed.
nouveau:
- set of misc fixes/cleanups
- display cleanups
gma500:
- Cleanup connector I2C handling
hyperv:
- Unify VRAM allocation of Gen1 and Gen2
meson:
- Support YUV422 output; Refcount fixes
mgag200:
- Support damage clipping
- Support gamma handling
- Protect concurrent HW access
- Fixes to connector
- Store model-specific limits in device-info structure
- fix PCI register init
panfrost:
- Valhall support
r128:
- Fix bit-shift overflow
rockchip:
- Locking fixes in error path
ssd130x:
- Fix built-in linkage
udl:
- Always advertize VGA connector
ast:
- Support multiple outputs
- fix black screen on resume
sun4i:
- HDMI PHY cleanups
vc4:
- Add support for BCM2711
vkms:
- Allocate output buffer with vmalloc()
mcde:
- Fix ref-count leak
mxsfb/lcdif:
- Support i.MX8MP LCD controller
stm/ltdc:
- Support dynamic Z order
- Support mirroring
ingenic:
- Fix display at maximum resolution"
* tag 'drm-next-2022-08-03' of git://anongit.freedesktop.org/drm/drm: (1480 commits)
drm/amd/display: Fix a compilation failure on PowerPC caused by FPU code
drm/amdgpu: enable support for psp 13.0.4 block
drm/amdgpu: add files for PSP 13.0.4
drm/amdgpu: add header files for MP 13.0.4
drm/amdgpu: correct RLC_RLCS_BOOTLOAD_STATUS offset and index
drm/amdgpu: send msg to IMU for the front-door loading
drm/amdkfd: use time_is_before_jiffies(a + b) to replace "jiffies - a > b"
drm/amdgpu: fix hive reference leak when reflecting psp topology info
drm/amd/pm: enable GFX ULV feature support for SMU13.0.0
drm/amd/pm: update driver if header for SMU 13.0.0
drm/amdgpu: move mes self test after drm sched re-started
drm/amdgpu: drop non-necessary call trace dump
drm/amdgpu: enable VCN cg and JPEG cg/pg
drm/amdgpu: vcn_4_0_2 video codec query
drm/amdgpu: add VCN_4_0_2 firmware support
drm/amdgpu: add VCN function in NBIO v7.7
drm/amdgpu: fix a vcn4 boot poll bug in emulation mode
drm/amd/amdgpu: add memory training support for PSP_V13
drm/amdkfd: remove an unnecessary amdgpu_bo_ref
drm/amd/pm: Add get_gfx_off_status interface for yellow carp
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- New driver for Semi AR0521 sensor
- rkisp1 CSI code was split into a separate file
- sun6i has gained support for the A31 MIPI CSI-2 controller
- sun8i has gained support for the A83T MIPI CSI-2 controller
- vimc driver got support for virtual lens
- HEVC uAPI has gained its final form and got added to public headers
- hantro and cedrus got updates on H-265 support
- stkwebcam was promoted from staging
- atomisp staging driver got cleanups on its hmm and kmap related logic
- ov5640 gained support for more modes and got some rework
- imx7-media-csi staging driver got several improvements related to mc
API support
- uvcvideo now handles better power line control
- mediatec vcodec gained support for new hardware and got some codec
updates
- Lots of other bug fixes, improvements and cleanups.
* tag 'media/v5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (446 commits)
media: hantro: Remove dedicated control documentation
hantro: Remove incorrect HEVC SPS validation
media: cedrus: hevc: Add check for invalid timestamp
media: sunxi: sun6i_mipi_csi2.c/sun8i_a83t_mipi_csi2.c: clarify error handling
media: uvcvideo: Fix invalid pointer in uvc_ctrl_init_ctrl()
media: Documentation: mc-core: Fix typo
media: videodev2.h.rst.exceptions: add missing exceptions
media: vimc: wrong pointer is used with PTR_ERR
media: rkisp1: debug: Add dump file in debugfs for MI main path registers
media: rkisp1: Make the internal CSI-2 receiver optional
media: rkisp1: Add infrastructure to support ISP features
media: rkisp1: Support the ISP parallel input
media: dt-bindings: media: rkisp1: Add port for parallel interface
media: rkisp1: Use fwnode_graph_for_each_endpoint
media: rkisp1: csi: Plumb the CSI RX subdev
media: rkisp1: csi: Implement a V4L2 subdev for the CSI receiver
media: rkisp1: isp: Disallow multiple active sources
media: rkisp1: isp: Rename rkisp1_get_remote_source()
media: rkisp1: isp: Constify various local variables
media: rkisp1: isp: Fix whitespace issues
...
|
|
Pull documentation updates from Jonathan Corbet:
"This was a moderately busy cycle for documentation, but nothing
all that earth-shaking:
- More Chinese translations, and an update to the Italian
translations.
The Japanese, Korean, and traditional Chinese translations
are more-or-less unmaintained at this point, instead.
- Some build-system performance improvements.
- The removal of the archaic submitting-drivers.rst document,
with the movement of what useful material that remained into
other docs.
- Improvements to sphinx-pre-install to, hopefully, give more
useful suggestions.
- A number of build-warning fixes
Plus the usual collection of typo fixes, updates, and more"
* tag 'docs-6.0' of git://git.lwn.net/linux: (92 commits)
docs: efi-stub: Fix paths for x86 / arm stubs
Docs/zh_CN: Update the translation of sched-stats to 5.19-rc8
Docs/zh_CN: Update the translation of pci to 5.19-rc8
Docs/zh_CN: Update the translation of pci-iov-howto to 5.19-rc8
Docs/zh_CN: Update the translation of usage to 5.19-rc8
Docs/zh_CN: Update the translation of testing-overview to 5.19-rc8
Docs/zh_CN: Update the translation of sparse to 5.19-rc8
Docs/zh_CN: Update the translation of kasan to 5.19-rc8
Docs/zh_CN: Update the translation of iio_configfs to 5.19-rc8
doc:it_IT: align Italian documentation
docs: Remove spurious tag from admin-guide/mm/overcommit-accounting.rst
Documentation: process: Update email client instructions for Thunderbird
docs: ABI: correct QEMU fw_cfg spec path
doc/zh_CN: remove submitting-driver reference from docs
docs: zh_TW: align to submitting-drivers removal
docs: zh_CN: align to submitting-drivers removal
docs: ko_KR: howto: remove reference to removed submitting-drivers
docs: ja_JP: howto: remove reference to removed submitting-drivers
docs: it_IT: align to submitting-drivers removal
docs: process: remove outdated submitting-drivers.rst
...
|
|
A recent snafu where Intel ignored upstream feedback on a firmware
change, led to a late rc6 fix being required. In order to avoid this
in the future we should document some expectations around
linux-firmware.
I was originally going to write this for drm, but it seems quite generic
advice.
v2: rewritten with suggestions from Thorsten Leemhuis
v3: rewritten with suggestions from Mauro
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://lore.kernel.org/r/20220721044352.3110507-1-airlied@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This was the only function mentioned in the text, but was neither linked
nor documented. So document and link it, so that hyperlinking works in
the text.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220728061056.20799-6-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There are many annotated functions in serial_core.c, but they do not
completely conform to the kernel-doc style. So reformat them and link
them from the Documentation.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220728061056.20799-5-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The syntax to reference a struct in text is "struct XY". So reference
uart_ops properly, so that hyperlinks work.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220728061056.20799-4-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The GPIO uart functions are documented in Documentation. Move and
transform this documentation into kernel-doc directly in the code and
reference it in Documentation using kernel-doc:.
This makes it easier to update, maintain and check by the build.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220728061056.20799-3-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|