diff options
Diffstat (limited to 'drivers/gpu/drm/drm_atomic.c')
| -rw-r--r-- | drivers/gpu/drm/drm_atomic.c | 141 |
1 files changed, 62 insertions, 79 deletions
diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c index fdfb1ec17e66..a5673107db26 100644 --- a/drivers/gpu/drm/drm_atomic.c +++ b/drivers/gpu/drm/drm_atomic.c @@ -35,19 +35,14 @@ #include "drm_crtc_internal.h" -static void crtc_commit_free(struct kref *kref) +void __drm_crtc_commit_free(struct kref *kref) { struct drm_crtc_commit *commit = container_of(kref, struct drm_crtc_commit, ref); kfree(commit); } - -void drm_crtc_commit_put(struct drm_crtc_commit *commit) -{ - kref_put(&commit->ref, crtc_commit_free); -} -EXPORT_SYMBOL(drm_crtc_commit_put); +EXPORT_SYMBOL(__drm_crtc_commit_free); /** * drm_atomic_state_default_release - @@ -200,8 +195,8 @@ EXPORT_SYMBOL(drm_atomic_state_default_clear); * all locks. So someone else could sneak in and change the current modeset * configuration. Which means that all the state assembled in @state is no * longer an atomic update to the current state, but to some arbitrary earlier - * state. Which could break assumptions the driver's ->atomic_check likely - * relies on. + * state. Which could break assumptions the driver's + * &drm_mode_config_funcs.atomic_check likely relies on. * * Hence we must clear all cached state and completely start over, using this * function. @@ -312,9 +307,8 @@ static s32 __user *get_out_fence_for_crtc(struct drm_atomic_state *state, * @state: the CRTC whose incoming state to update * @mode: kernel-internal mode to use for the CRTC, or NULL to disable * - * Set a mode (originating from the kernel) on the desired CRTC state. Does - * not change any other state properties, including enable, active, or - * mode_changed. + * Set a mode (originating from the kernel) on the desired CRTC state and update + * the enable property. * * RETURNS: * Zero on success, error code on failure. Cannot return -EDEADLK. @@ -461,11 +455,10 @@ drm_atomic_replace_property_blob_from_id(struct drm_crtc *crtc, * @property: the property to set * @val: the new property value * - * Use this instead of calling crtc->atomic_set_property directly. - * This function handles generic/core properties and calls out to - * driver's ->atomic_set_property() for driver properties. To ensure - * consistent behavior you must call this function rather than the - * driver hook directly. + * This function handles generic/core properties and calls out to driver's + * &drm_crtc_funcs.atomic_set_property for driver properties. To ensure + * consistent behavior you must call this function rather than the driver hook + * directly. * * RETURNS: * Zero on success, error code on failure @@ -537,10 +530,10 @@ EXPORT_SYMBOL(drm_atomic_crtc_set_property); * @property: the property to set * @val: return location for the property value * - * This function handles generic/core properties and calls out to - * driver's ->atomic_get_property() for driver properties. To ensure - * consistent behavior you must call this function rather than the - * driver hook directly. + * This function handles generic/core properties and calls out to driver's + * &drm_crtc_funcs.atomic_get_property for driver properties. To ensure + * consistent behavior you must call this function rather than the driver hook + * directly. * * RETURNS: * Zero on success, error code on failure @@ -721,11 +714,10 @@ EXPORT_SYMBOL(drm_atomic_get_plane_state); * @property: the property to set * @val: the new property value * - * Use this instead of calling plane->atomic_set_property directly. - * This function handles generic/core properties and calls out to - * driver's ->atomic_set_property() for driver properties. To ensure - * consistent behavior you must call this function rather than the - * driver hook directly. + * This function handles generic/core properties and calls out to driver's + * &drm_plane_funcs.atomic_set_property for driver properties. To ensure + * consistent behavior you must call this function rather than the driver hook + * directly. * * RETURNS: * Zero on success, error code on failure @@ -796,10 +788,10 @@ EXPORT_SYMBOL(drm_atomic_plane_set_property); * @property: the property to set * @val: return location for the property value * - * This function handles generic/core properties and calls out to - * driver's ->atomic_get_property() for driver properties. To ensure - * consistent behavior you must call this function rather than the - * driver hook directly. + * This function handles generic/core properties and calls out to driver's + * &drm_plane_funcs.atomic_get_property for driver properties. To ensure + * consistent behavior you must call this function rather than the driver hook + * directly. * * RETURNS: * Zero on success, error code on failure @@ -902,11 +894,11 @@ static int drm_atomic_plane_check(struct drm_plane *plane, } /* Check whether this plane supports the fb pixel format. */ - ret = drm_plane_check_pixel_format(plane, state->fb->pixel_format); + ret = drm_plane_check_pixel_format(plane, state->fb->format->format); if (ret) { struct drm_format_name_buf format_name; DRM_DEBUG_ATOMIC("Invalid pixel format %s\n", - drm_get_format_name(state->fb->pixel_format, + drm_get_format_name(state->fb->format->format, &format_name)); return ret; } @@ -960,11 +952,11 @@ static void drm_atomic_plane_print_state(struct drm_printer *p, drm_printf(p, "\tfb=%u\n", state->fb ? state->fb->base.id : 0); if (state->fb) { struct drm_framebuffer *fb = state->fb; - int i, n = drm_format_num_planes(fb->pixel_format); + int i, n = fb->format->num_planes; struct drm_format_name_buf format_name; drm_printf(p, "\t\tformat=%s\n", - drm_get_format_name(fb->pixel_format, &format_name)); + drm_get_format_name(fb->format->format, &format_name)); drm_printf(p, "\t\t\tmodifier=0x%llx\n", fb->modifier); drm_printf(p, "\t\tsize=%dx%d\n", fb->width, fb->height); drm_printf(p, "\t\tlayers:\n"); @@ -1062,11 +1054,10 @@ EXPORT_SYMBOL(drm_atomic_get_connector_state); * @property: the property to set * @val: the new property value * - * Use this instead of calling connector->atomic_set_property directly. - * This function handles generic/core properties and calls out to - * driver's ->atomic_set_property() for driver properties. To ensure - * consistent behavior you must call this function rather than the - * driver hook directly. + * This function handles generic/core properties and calls out to driver's + * &drm_connector_funcs.atomic_set_property for driver properties. To ensure + * consistent behavior you must call this function rather than the driver hook + * directly. * * RETURNS: * Zero on success, error code on failure @@ -1141,10 +1132,10 @@ static void drm_atomic_connector_print_state(struct drm_printer *p, * @property: the property to set * @val: return location for the property value * - * This function handles generic/core properties and calls out to - * driver's ->atomic_get_property() for driver properties. To ensure - * consistent behavior you must call this function rather than the - * driver hook directly. + * This function handles generic/core properties and calls out to driver's + * &drm_connector_funcs.atomic_get_property for driver properties. To ensure + * consistent behavior you must call this function rather than the driver hook + * directly. * * RETURNS: * Zero on success, error code on failure @@ -1317,12 +1308,11 @@ EXPORT_SYMBOL(drm_atomic_set_fb_for_plane); * implicit or explicit fencing. * * This function will not set the fence to the state if it was set - * via explicit fencing interfaces on the atomic ioctl. It will - * all drope the reference to the fence as we not storing it - * anywhere. - * - * Otherwise, if plane_state->fence is not set this function we - * just set it with the received implict fence. + * via explicit fencing interfaces on the atomic ioctl. In that case it will + * drop the reference to the fence as we are not storing it anywhere. + * Otherwise, if &drm_plane_state.fence is not set this function we just set it + * with the received implicit fence. In both cases this function consumes a + * reference for @fence. */ void drm_atomic_set_fence_for_plane(struct drm_plane_state *plane_state, @@ -1417,6 +1407,7 @@ drm_atomic_add_affected_connectors(struct drm_atomic_state *state, struct drm_mode_config *config = &state->dev->mode_config; struct drm_connector *connector; struct drm_connector_state *conn_state; + struct drm_connector_list_iter conn_iter; int ret; ret = drm_modeset_lock(&config->connection_mutex, state->acquire_ctx); @@ -1430,14 +1421,18 @@ drm_atomic_add_affected_connectors(struct drm_atomic_state *state, * Changed connectors are already in @state, so only need to look at the * current configuration. */ - drm_for_each_connector(connector, state->dev) { + drm_connector_list_iter_get(state->dev, &conn_iter); + drm_for_each_connector_iter(connector, &conn_iter) { if (connector->state->crtc != crtc) continue; conn_state = drm_atomic_get_connector_state(state, connector); - if (IS_ERR(conn_state)) + if (IS_ERR(conn_state)) { + drm_connector_list_iter_put(&conn_iter); return PTR_ERR(conn_state); + } } + drm_connector_list_iter_put(&conn_iter); return 0; } @@ -1594,10 +1589,8 @@ EXPORT_SYMBOL(drm_atomic_check_only); * more locks but encountered a deadlock. The caller must then do the usual w/w * backoff dance and restart. All other errors are fatal. * - * Also note that on successful execution ownership of @state is transferred - * from the caller of this function to the function itself. The caller must not - * free or in any other way access @state. If the function fails then the caller - * must clean up @state itself. + * This function will take its own reference on @state. + * Callers should always release their reference with drm_atomic_state_put(). * * Returns: * 0 on success, negative error code on failure. @@ -1618,17 +1611,15 @@ int drm_atomic_commit(struct drm_atomic_state *state) EXPORT_SYMBOL(drm_atomic_commit); /** - * drm_atomic_nonblocking_commit - atomic&nonblocking configuration commit + * drm_atomic_nonblocking_commit - atomic nonblocking commit * @state: atomic configuration to check * * Note that this function can return -EDEADLK if the driver needed to acquire * more locks but encountered a deadlock. The caller must then do the usual w/w * backoff dance and restart. All other errors are fatal. * - * Also note that on successful execution ownership of @state is transferred - * from the caller of this function to the function itself. The caller must not - * free or in any other way access @state. If the function fails then the caller - * must clean up @state itself. + * This function will take its own reference on @state. + * Callers should always release their reference with drm_atomic_state_put(). * * Returns: * 0 on success, negative error code on failure. @@ -1692,6 +1683,7 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p) struct drm_plane *plane; struct drm_crtc *crtc; struct drm_connector *connector; + struct drm_connector_list_iter conn_iter; if (!drm_core_check_feature(dev, DRIVER_ATOMIC)) return; @@ -1702,8 +1694,10 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p) list_for_each_entry(crtc, &config->crtc_list, head) drm_atomic_crtc_print_state(p, crtc->state); - list_for_each_entry(connector, &config->connector_list, head) + drm_connector_list_iter_get(dev, &conn_iter); + drm_for_each_connector_iter(connector, &conn_iter) drm_atomic_connector_print_state(p, connector->state); + drm_connector_list_iter_put(&conn_iter); } EXPORT_SYMBOL(drm_state_dump); @@ -1732,13 +1726,6 @@ int drm_atomic_debugfs_init(struct drm_minor *minor) ARRAY_SIZE(drm_atomic_debugfs_list), minor->debugfs_root, minor); } - -int drm_atomic_debugfs_cleanup(struct drm_minor *minor) -{ - return drm_debugfs_remove_files(drm_atomic_debugfs_list, - ARRAY_SIZE(drm_atomic_debugfs_list), - minor); -} #endif /* @@ -1830,10 +1817,10 @@ static int atomic_set_prop(struct drm_atomic_state *state, * @plane_mask: plane mask for planes that were updated. * @ret: return value, can be -EDEADLK for a retry. * - * Before doing an update plane->old_fb is set to plane->fb, - * but before dropping the locks old_fb needs to be set to NULL - * and plane->fb updated. This is a common operation for each - * atomic update, so this call is split off as a helper. + * Before doing an update &drm_plane.old_fb is set to &drm_plane.fb, but before + * dropping the locks old_fb needs to be set to NULL and plane->fb updated. This + * is a common operation for each atomic update, so this call is split off as a + * helper. */ void drm_atomic_clean_old_fb(struct drm_device *dev, unsigned plane_mask, @@ -1874,7 +1861,7 @@ EXPORT_SYMBOL(drm_atomic_clean_old_fb); * As a contrast, with implicit fencing the kernel keeps track of any * ongoing rendering, and automatically ensures that the atomic update waits * for any pending rendering to complete. For shared buffers represented with - * a struct &dma_buf this is tracked in &reservation_object structures. + * a &struct dma_buf this is tracked in &struct reservation_object. * Implicit syncing is how Linux traditionally worked (e.g. DRI2/3 on X.org), * whereas explicit fencing is what Android wants. * @@ -1890,7 +1877,7 @@ EXPORT_SYMBOL(drm_atomic_clean_old_fb); * it will only check if the Sync File is a valid one. * * On the driver side the fence is stored on the @fence parameter of - * struct &drm_plane_state. Drivers which also support implicit fencing + * &struct drm_plane_state. Drivers which also support implicit fencing * should set the implicit fence using drm_atomic_set_fence_for_plane(), * to make sure there's consistent behaviour between drivers in precedence * of implicit vs. explicit fencing. @@ -1909,7 +1896,7 @@ EXPORT_SYMBOL(drm_atomic_clean_old_fb); * DRM_MODE_ATOMIC_TEST_ONLY flag the out fence will also be set to -1. * * Note that out-fences don't have a special interface to drivers and are - * internally represented by a struct &drm_pending_vblank_event in struct + * internally represented by a &struct drm_pending_vblank_event in struct * &drm_crtc_state, which is also used by the nonblocking atomic commit * helpers and for the DRM event handling for existing userspace. */ @@ -2198,10 +2185,6 @@ retry: goto out; if (arg->flags & DRM_MODE_ATOMIC_TEST_ONLY) { - /* - * Unlike commit, check_only does not clean up state. - * Below we call drm_atomic_state_put for it. - */ ret = drm_atomic_check_only(state); } else if (arg->flags & DRM_MODE_ATOMIC_NONBLOCK) { ret = drm_atomic_nonblocking_commit(state); |