From 83d9f65bdae6f6b34d75282c6618d3f50846849a Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sun, 29 Aug 2010 18:12:24 -0700 Subject: x86, setup: Fix earlyprintk=serial,ttyS0,115200 Torsten reported that there is garbage output, after commit 8fee13a48e4879fba57725f6d9513df4bfa8e9f3 (x86, setup: enable early console output from the decompressor) It turns out we missed the offset for that case. Reported-by: Torsten Kaiser Signed-off-by: Yinghai Lu LKML-Reference: <4C7B0578.8090807@kernel.org> Signed-off-by: H. Peter Anvin --- arch/x86/boot/early_serial_console.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/x86') diff --git a/arch/x86/boot/early_serial_console.c b/arch/x86/boot/early_serial_console.c index 030f4b93e255..407a8e26f0a7 100644 --- a/arch/x86/boot/early_serial_console.c +++ b/arch/x86/boot/early_serial_console.c @@ -58,7 +58,7 @@ static void parse_earlyprintk(void) if (arg[pos] == ',') pos++; - if (!strncmp(arg, "ttyS", 4)) { + if (!strncmp(arg + pos, "ttyS", 4)) { static const int bases[] = { 0x3f8, 0x2f8 }; int idx = 0; -- cgit v1.2.3 From 74b3c444a963ba55aef89b33a1bcaada9a4c206f Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sun, 29 Aug 2010 18:13:10 -0700 Subject: x86, setup: Fix earlyprintk=serial,0x3f8,115200 earlyprintk can take and I/O port, so we need to handle this case in the setup code too, otherwise 0x3f8 will be treated as a baud rate. Signed-off-by: Yinghai Lu LKML-Reference: <4C7B05A6.4010801@kernel.org> Signed-off-by: H. Peter Anvin --- arch/x86/boot/early_serial_console.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) (limited to 'arch/x86') diff --git a/arch/x86/boot/early_serial_console.c b/arch/x86/boot/early_serial_console.c index 407a8e26f0a7..5df2869c874b 100644 --- a/arch/x86/boot/early_serial_console.c +++ b/arch/x86/boot/early_serial_console.c @@ -58,7 +58,19 @@ static void parse_earlyprintk(void) if (arg[pos] == ',') pos++; - if (!strncmp(arg + pos, "ttyS", 4)) { + /* + * make sure we have + * "serial,0x3f8,115200" + * "serial,ttyS0,115200" + * "ttyS0,115200" + */ + if (pos == 7 && !strncmp(arg + pos, "0x", 2)) { + port = simple_strtoull(arg + pos, &e, 16); + if (port == 0 || arg + pos == e) + port = DEFAULT_SERIAL_PORT; + else + pos = e - arg; + } else if (!strncmp(arg + pos, "ttyS", 4)) { static const int bases[] = { 0x3f8, 0x2f8 }; int idx = 0; -- cgit v1.2.3 From e9bf51971157e367aabfc111a8219db010f69cd4 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Mon, 20 Sep 2010 14:33:07 +0200 Subject: x86/amd-iommu: Set iommu configuration flags in enable-loop This patch moves the setting of the configuration and feature flags out out the acpi table parsing path and moves it into the iommu-enable path. This is needed to reliably fix resume-from-s3. Cc: stable@kernel.org Signed-off-by: Joerg Roedel --- arch/x86/include/asm/amd_iommu_types.h | 3 +++ arch/x86/kernel/amd_iommu_init.c | 49 +++++++++++++++++++--------------- 2 files changed, 30 insertions(+), 22 deletions(-) (limited to 'arch/x86') diff --git a/arch/x86/include/asm/amd_iommu_types.h b/arch/x86/include/asm/amd_iommu_types.h index 7014e88bc779..ef2d5cd7d7e7 100644 --- a/arch/x86/include/asm/amd_iommu_types.h +++ b/arch/x86/include/asm/amd_iommu_types.h @@ -368,6 +368,9 @@ struct amd_iommu { /* capabilities of that IOMMU read from ACPI */ u32 cap; + /* flags read from acpi table */ + u8 acpi_flags; + /* * Capability pointer. There could be more than one IOMMU per PCI * device function if there are more than one AMD IOMMU capability diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c index 3cc63e2b8dd4..85e9817ead43 100644 --- a/arch/x86/kernel/amd_iommu_init.c +++ b/arch/x86/kernel/amd_iommu_init.c @@ -649,29 +649,9 @@ static void __init init_iommu_from_acpi(struct amd_iommu *iommu, struct ivhd_entry *e; /* - * First set the recommended feature enable bits from ACPI - * into the IOMMU control registers + * First save the recommended feature enable bits from ACPI */ - h->flags & IVHD_FLAG_HT_TUN_EN_MASK ? - iommu_feature_enable(iommu, CONTROL_HT_TUN_EN) : - iommu_feature_disable(iommu, CONTROL_HT_TUN_EN); - - h->flags & IVHD_FLAG_PASSPW_EN_MASK ? - iommu_feature_enable(iommu, CONTROL_PASSPW_EN) : - iommu_feature_disable(iommu, CONTROL_PASSPW_EN); - - h->flags & IVHD_FLAG_RESPASSPW_EN_MASK ? - iommu_feature_enable(iommu, CONTROL_RESPASSPW_EN) : - iommu_feature_disable(iommu, CONTROL_RESPASSPW_EN); - - h->flags & IVHD_FLAG_ISOC_EN_MASK ? - iommu_feature_enable(iommu, CONTROL_ISOC_EN) : - iommu_feature_disable(iommu, CONTROL_ISOC_EN); - - /* - * make IOMMU memory accesses cache coherent - */ - iommu_feature_enable(iommu, CONTROL_COHERENT_EN); + iommu->acpi_flags = h->flags; /* * Done. Now parse the device entries @@ -1116,6 +1096,30 @@ static void init_device_table(void) } } +static void iommu_init_flags(struct amd_iommu *iommu) +{ + iommu->acpi_flags & IVHD_FLAG_HT_TUN_EN_MASK ? + iommu_feature_enable(iommu, CONTROL_HT_TUN_EN) : + iommu_feature_disable(iommu, CONTROL_HT_TUN_EN); + + iommu->acpi_flags & IVHD_FLAG_PASSPW_EN_MASK ? + iommu_feature_enable(iommu, CONTROL_PASSPW_EN) : + iommu_feature_disable(iommu, CONTROL_PASSPW_EN); + + iommu->acpi_flags & IVHD_FLAG_RESPASSPW_EN_MASK ? + iommu_feature_enable(iommu, CONTROL_RESPASSPW_EN) : + iommu_feature_disable(iommu, CONTROL_RESPASSPW_EN); + + iommu->acpi_flags & IVHD_FLAG_ISOC_EN_MASK ? + iommu_feature_enable(iommu, CONTROL_ISOC_EN) : + iommu_feature_disable(iommu, CONTROL_ISOC_EN); + + /* + * make IOMMU memory accesses cache coherent + */ + iommu_feature_enable(iommu, CONTROL_COHERENT_EN); +} + /* * This function finally enables all IOMMUs found in the system after * they have been initialized @@ -1126,6 +1130,7 @@ static void enable_iommus(void) for_each_iommu(iommu) { iommu_disable(iommu); + iommu_init_flags(iommu); iommu_set_device_table(iommu); iommu_enable_command_buffer(iommu); iommu_enable_event_buffer(iommu); -- cgit v1.2.3 From 4c894f47bb49284008073d351c0ddaac8860864e Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Thu, 23 Sep 2010 15:15:19 +0200 Subject: x86/amd-iommu: Work around S3 BIOS bug This patch adds a workaround for an IOMMU BIOS problem to the AMD IOMMU driver. The result of the bug is that the IOMMU does not execute commands anymore when the system comes out of the S3 state resulting in system failure. The bug in the BIOS is that is does not restore certain hardware specific registers correctly. This workaround reads out the contents of these registers at boot time and restores them on resume from S3. The workaround is limited to the specific IOMMU chipset where this problem occurs. Cc: stable@kernel.org Signed-off-by: Joerg Roedel --- arch/x86/include/asm/amd_iommu_proto.h | 6 ++++++ arch/x86/include/asm/amd_iommu_types.h | 9 +++++++++ arch/x86/kernel/amd_iommu_init.c | 18 ++++++++++++++++++ 3 files changed, 33 insertions(+) (limited to 'arch/x86') diff --git a/arch/x86/include/asm/amd_iommu_proto.h b/arch/x86/include/asm/amd_iommu_proto.h index d2544f1d705d..cb030374b90a 100644 --- a/arch/x86/include/asm/amd_iommu_proto.h +++ b/arch/x86/include/asm/amd_iommu_proto.h @@ -38,4 +38,10 @@ static inline void amd_iommu_stats_init(void) { } #endif /* !CONFIG_AMD_IOMMU_STATS */ +static inline bool is_rd890_iommu(struct pci_dev *pdev) +{ + return (pdev->vendor == PCI_VENDOR_ID_ATI) && + (pdev->device == PCI_DEVICE_ID_RD890_IOMMU); +} + #endif /* _ASM_X86_AMD_IOMMU_PROTO_H */ diff --git a/arch/x86/include/asm/amd_iommu_types.h b/arch/x86/include/asm/amd_iommu_types.h index ef2d5cd7d7e7..08616180deaf 100644 --- a/arch/x86/include/asm/amd_iommu_types.h +++ b/arch/x86/include/asm/amd_iommu_types.h @@ -414,6 +414,15 @@ struct amd_iommu { /* default dma_ops domain for that IOMMU */ struct dma_ops_domain *default_dom; + + /* + * This array is required to work around a potential BIOS bug. + * The BIOS may miss to restore parts of the PCI configuration + * space when the system resumes from S3. The result is that the + * IOMMU does not execute commands anymore which leads to system + * failure. + */ + u32 cache_cfg[4]; }; /* diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c index 85e9817ead43..5a170cbbbed8 100644 --- a/arch/x86/kernel/amd_iommu_init.c +++ b/arch/x86/kernel/amd_iommu_init.c @@ -632,6 +632,13 @@ static void __init init_iommu_from_pci(struct amd_iommu *iommu) iommu->last_device = calc_devid(MMIO_GET_BUS(range), MMIO_GET_LD(range)); iommu->evt_msi_num = MMIO_MSI_NUM(misc); + + if (is_rd890_iommu(iommu->dev)) { + pci_read_config_dword(iommu->dev, 0xf0, &iommu->cache_cfg[0]); + pci_read_config_dword(iommu->dev, 0xf4, &iommu->cache_cfg[1]); + pci_read_config_dword(iommu->dev, 0xf8, &iommu->cache_cfg[2]); + pci_read_config_dword(iommu->dev, 0xfc, &iommu->cache_cfg[3]); + } } /* @@ -1120,6 +1127,16 @@ static void iommu_init_flags(struct amd_iommu *iommu) iommu_feature_enable(iommu, CONTROL_COHERENT_EN); } +static void iommu_apply_quirks(struct amd_iommu *iommu) +{ + if (is_rd890_iommu(iommu->dev)) { + pci_write_config_dword(iommu->dev, 0xf0, iommu->cache_cfg[0]); + pci_write_config_dword(iommu->dev, 0xf4, iommu->cache_cfg[1]); + pci_write_config_dword(iommu->dev, 0xf8, iommu->cache_cfg[2]); + pci_write_config_dword(iommu->dev, 0xfc, iommu->cache_cfg[3]); + } +} + /* * This function finally enables all IOMMUs found in the system after * they have been initialized @@ -1130,6 +1147,7 @@ static void enable_iommus(void) for_each_iommu(iommu) { iommu_disable(iommu); + iommu_apply_quirks(iommu); iommu_init_flags(iommu); iommu_set_device_table(iommu); iommu_enable_command_buffer(iommu); -- cgit v1.2.3 From 04e0463e088b41060c08c255eb0d3278a504f094 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Thu, 23 Sep 2010 16:12:48 +0200 Subject: x86/amd-iommu: Fix rounding-bug in __unmap_single In the __unmap_single function the dma_addr is rounded down to a page boundary before the dma pages are unmapped. The address is later also used to flush the TLB entries for that mapping. But without the offset into the dma page the amount of pages to flush might be miscalculated in the TLB flushing path. This patch fixes this bug by using the original address to flush the TLB. Cc: stable@kernel.org Signed-off-by: Joerg Roedel --- arch/x86/kernel/amd_iommu.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch/x86') diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c index fa044e1e30a2..679b6450382b 100644 --- a/arch/x86/kernel/amd_iommu.c +++ b/arch/x86/kernel/amd_iommu.c @@ -1953,6 +1953,7 @@ static void __unmap_single(struct dma_ops_domain *dma_dom, size_t size, int dir) { + dma_addr_t flush_addr; dma_addr_t i, start; unsigned int pages; @@ -1960,6 +1961,7 @@ static void __unmap_single(struct dma_ops_domain *dma_dom, (dma_addr + size > dma_dom->aperture_size)) return; + flush_addr = dma_addr; pages = iommu_num_pages(dma_addr, size, PAGE_SIZE); dma_addr &= PAGE_MASK; start = dma_addr; @@ -1974,7 +1976,7 @@ static void __unmap_single(struct dma_ops_domain *dma_dom, dma_ops_free_addresses(dma_dom, dma_addr, pages); if (amd_iommu_unmap_flush || dma_dom->need_flush) { - iommu_flush_pages(&dma_dom->domain, dma_addr, size); + iommu_flush_pages(&dma_dom->domain, flush_addr, size); dma_dom->need_flush = false; } } -- cgit v1.2.3